QNAP TVS-473e NAS PLEX Media Server Transcoding 4K and 1080p Test featuring H.264 and H.265

Transcoding 4K Media on the QNAP TVS-473e NAS Plex Media Server?

Transcoding on a NAS such as the QNAP TVS-473 device is the ability for a multimedia file to be changed from it’s existing format or codec to one that is better suited to the destination device. In this file access, the QNAP TVS-473 NAS is the host device and the device you want to play the file is the client. This is the case of whether you are using Plex or not. Transcoding is typically required when a media file is more recently released than the client device that is accessing it, so the newer compression or playback format is unknown to the device you want to access it with. Alternatively, you want to access the movie or music on your QNAP TVS-473 and do not want to use the original file in its full size. Transcoding can enable you to stream a much smaller version in weight or resolution if needed. IN a popular program such as PLEX, smooth playback is essential, and with the plex media server application on the QNAP TVS-473 NAS using a larger percentage of CPU and Memory than most programs, it is very useful to know the plex transcoding abilities of any NAS.

OFFICIALLY the Best NAS for A Plex Media Server of 2017

Why should you factor transcoding with a Plex Media Server on a QNAP TVS-473 NAS

When you install a Plex Media Server on your QNAP TVS-473, you should know that plex is not the answer to all of your media prayers. It has some limitations and depending on the NAS you use, these limits can be annoying. You will most likely have media files in a large collection of different formats and there is no guaranteeing that these are going to be compatible with TVs, iPads and Smartphones that you wish to watch them on. Although you will have a version of the Plex app on the viewing device, that app will still be locked to playback the supported media types on that device.

So if your phone does not support.MKV or .MOV, then neither does the plex app you installed on it. However, this is where transcoding comes in again, as the plex media server will use the NAS system resources to change the file to a version/format that it CAN play. What makes transcoding with Plex different to ordinary transcoding is that often, the NAS (in this case, the QNAP TVS-473) will not let the plex use the transcoding engine inside. This is not the end of the world, as it will use raw system power instead. The result is that where a regular transcode outside of plex will use 20-30%, in plex it could go as high as 70-80%. This is why it is important to know how well a plex NAS will transcode, as if it will hapen regularly, it could potentially slow down the general use of your QNAP TVS-473 NAS.

Which plex supported client devices require transcoding from the QNAP TVS-473e NAS

Destination devices range greatly and are often referred to as the client device. Common client devices that your QNAP TVS-473 device will be accessed by are often:

  • iPad or Android Tablet
  • iPhone or Android Smartphone
  • Smart TV or DLNA supported monitor
  • Macbook, Laptop or Netbook device
  • Sound systems such as Bose, Sonos and Sony DLNA systems
  • Home Theatre Systems
  • Network and internet-enabled gaming consoles such as PS4, Xbox One and Nvidia Shield

Transcoding between a QNAP TVS-473 and your media can be of tremendous benefit for those with limited internet bandwidth, download limits or low powered devices whilst using the plex client application.


What are the Specifications of the QNAP TVS-473 NAS?

The specifications for the QNAP TVS-473 NAS are below and like all NAS devices, the CPU and Memory play a big part in how well it performs at transcoding both in and out of plex. The key factors to consider are if the device features an x86 or ARM-based CPU, does the QNAP TVS-473 CPU feature a transcoding engine and how much RAM the device arrives with for multiple transcoding tasks. Below are the QNAP TVS-473 specs:

NAS Model

QNAP TVS-473e

SPECS

4-64GB of DDR4 Memory

AMD R-Series RX-421BD
Quad-core 2.1 GHz, burst up to 3.4 GHz
Embedded Radeon™ R7 graphics processor
Encryption Engine: AES-NI

TRANSCODING ENGINE: YES

1080P Support: YES

4K Support: YES

Transcoding Support: YES

Where to Buy

What is the difference between H.264 and H.265 4K Media on a NAS

H.264 and H.265 are common codecs of modern digital media. H264 is also referred to as AVC by experts (Advanced Video Coding) and is considered the standard for video file compression. This allows for media originally created for large-scale entertainment to be recording, compressed, and distributed to the home and smaller scale production of digital video content watched by you, the consumer via plex.

H265 is the newer and more consumer-friendly alternative to H264. It is also known as HEVC (High-Efficiency Video Coding) and was developed in order resolve issues of enormous 4K media files being just too large for your client device to playback. H.265 has become so popular and data saving that chances are that the YouTube clip, iTunes media or iPlayer content you watched was in .265 and HEVC. Typically a modern NAS such as the QNAP TVS-473 will playback with JUST H.265 or it will PLayback both H.264 and H.265. The latter pretty much being exclusive to x86 or AMD based NAS CPU devices.

The QNAP TVS-473 NAS 4K H.265 8-bit 30fps 46Mb/s PLEX Test 1- How well does it perform?

We pushed the QNAP TVS-473 NAS to transcode a 4K H265 media file through the plex media server application. It was an 8-bit recording, running at 30 frames per second and featured a bitrate of 46 megabits per second. The QNAP TVS-473 playback results were:

The QNAP TVS-473 NAS 4K H.265 8-bit 25fps 38Mb/s PLEX Test 2 – How well does it perform?

Next, we pushed the QNAP TVS-473 NAS to transcode a 4K H265 media file through the plex media server application. It was an 8-bit recording, but this time running at 25 frames per second and featured a bitrate of just 38 megabits per second. The QNAP TVS-473 playback results were:

The QNAP TVS-473 NAS 4K H.264 8-bit 30fps 51Mb/s PLEX Test 3 – How well does it perform?

Next, we pushed the QNAP TVS-473 NAS to transcode a 4K H264 this time, the media file was an 8-bit recording, but this time back at 30 frames per second and featured a bitrate of 51 megabits per second, our highest yet. The QNAP TVS-473 playback through the plex media server application results were:

 

The QNAP TVS-473 NAS 4K H.265 10-bit 30fps 38Mb/s PLEX Test 7 – How well does it perform?

We then ran a much denser H.265 4K file on the QNAP TVS-473. This H265 file through the plex media server application was another 10-bit recording, at 30fps  but this time with a much higher bitrate of 38 megabits per second. The QNAP TVS-473 playback results were:

 

The QNAP TVS-473 NAS 1080p H.265 8-bit 24fps 405kb/s PLEX Test 10 – How well does it perform?

In an effort to maintain fairness, we also covered an H.265 1080p file, so a comparison between this and Test 12 could be made. Ignore the test numerical order numbers, as this needed to be re-done (blame the QNAP TVS-473 needing a firmware update mid transcode and therefore spoiled the results the first time). This was an HEVC/H265 8-bit file running at 24fps through the plex media server application, but with a comparatively low bitrate of just 405kbps. The results (correct this time) were again, fairly expected:

 

The QNAP TVS-473 NAS Ultra HD 4K H.264 8-bit 24fps 22Mb/s PLEX Test 15 – How well does it perform?

We then decided to end on an older and currently more common owned 4K type of media file. This was kind of our control tests for most NAS and was no exception for the QNAP TVS-473 through the plex media server application. This UHD file in 4K was an 8-Bit file, arriving in 24 frames per second and at a bitrate of 22megabits per second. For those who have owned 4k media for a while and want to consider their older H264 material, this test would be of interest. The results were.

The QNAP TVS-473 NAS 1080p H.264 8-bit 24fps 13Mb/s PLEX Test 16 – How well does it perform?

In order to validate the earlier tests, we then switched back to 1080p/HD briefly as we could test an older h264 mp4 file via the plex media server application on the QNAP TVS-473. This 2014 made media file type was pretty high spec back then and below we can see how the QNAP TVS-473 dealt with the 8-bit file at 24frames per second via plex with transcoding enabled.

The QNAP TVS-473 NAS 1080p H.264 8-bit 24fps 40Mb/s PLEX Test 17 – How well does it perform?

For test 17 we wanted to check that the file used in test 16 was not just a fluke, so we found the exact file, at the same frames per second, file format (mp4), in 1080p and in h.264 type – however this file was THREE TIMES the bitrate. So, the same as before but denser. We can then see a direct comparison between them and how bitrate effects plex media server transcoding on the QNAP TVS-473 NAS.

 

I hope these Plex Media Server 4K results were of use to you and this helps you consider which NAS you wish to you buy in 2018, whether it is the QNAP TVS-473 or something more or less suited to your needs.

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

        This description contains links to Amazon. These links will take you to some of the products mentioned in today’s video. As an Amazon Associate, I earn from qualifying purchases

       

       

      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      ASK YOUR QUESTIONS HERE!