Choosing the Right UPS for your Synology or QNAP NAS Drive – Get it Right FIRST TIME!

An Easy Guide to Buying the Right UPS for your NAS System

The popularity of uninterruptible power supplies (UPS) has risen significantly in recent years. Not just for businesses, but for home users as well, who often have limited power setups such as houseboats, pop-up offices, and mobile homes. The value of having a safety net for your power-consuming devices is undeniable. Additionally, for those whose data is critical and whose business or personal life relies on constant access and read/write operations, a UPS can provide peace of mind. In the past, power failure solutions were only accessible to large enterprises and high-level businesses, with prices starting in the five figures. However, with the rise of network-attached storage (NAS) in homes and the increased efficiency of mass production techniques, owning a UPS device to protect data in both homes and businesses has become more affordable. However, choosing the right UPS for your NAS device, such as a QNAP or Synology, and finding one that fits within your budget can be challenging. In this guide, we will address the three commonly asked questions by users considering a UPS but unsure of which device to choose: 1) How does a UPS work and how will I benefit? 2) How do I determine the right Watts, Volts, and Amps to choose the best UPS? 3) How much will a UPS cost? We hope this guide is helpful for NAS buyers looking at brands such as Synology, QNAP, Asustor, Terramaster, and others, and also for anyone looking to choose the right UPS for other devices.

Click HERE to Skip ahead to the Recommended UPS for different NAS drives

What Are the Factors I need to consider when buying a UPS for my NAS?

Choosing the right UPS (uninterruptible power supply) for your Synology or QNAP NAS (network-attached storage) can be a complex task, as there are many factors to consider. However, by following a few key guidelines, you can ensure that your NAS is protected against power outages and other issues that could cause data loss or corruption. The first thing to consider when choosing a UPS for your NAS is the amount of power that your NAS requires. Desktop NAS devices with external PSUs typically have a power consumption of around 60-120 watts and rackmounts generally 250W and above, although this can vary depending on the specific model and the number of hard drives that are installed. It is important to choose a UPS that can provide at least this much power, as well as a bit extra to account for any other devices that may be connected to the NAS. Another important factor to consider is the runtime of the UPS. This is the amount of time that the UPS can keep your NAS running in the event of a power outage. The runtime of a UPS is typically measured in minutes, and you should choose a UPS that has a runtime that is long enough to allow you to properly shut down your NAS in the event of a power outage.

Another important feature to look for when choosing a UPS is the ability to communicate with the NAS. Some UPS’ have built-in USB or serial ports that allow them to communicate with the NAS and provide status information. This can be very useful in case of power outage, as it can allow you to monitor the status of the UPS and take appropriate action. Finally, you should also consider the size and weight of the UPS, as well as its overall design. A UPS that is smaller and lighter may be more convenient to deploy, but you should also make sure that it is well-designed and built to last. When choosing a UPS for your NAS, it is important to consider the amount of power that your NAS requires, the runtime of the UPS, the ability to communicate with the NAS, compatibility and the size and weight of the UPS. By following these guidelines, you can ensure that your NAS is protected against power outages and other issues that could cause data loss or corruption.

What is a UPS and Why Should I Buy One for my NAS?

The most frequently asked question about UPS is typically “What exactly is a UPS and what does it do?” UPS stands for Uninterruptible Power Supply and many users believe that purchasing a UPS means they can run their devices and access data from their NAS, DAS, or SAN for hours after a power failure. While this is technically true, it would require a significant financial investment in the form of a 5-figure sum. In reality, most users do not require hours of protection for their read/write data operations on HDD media. Instead, what is often needed is enough time to safely shut down the server or RAID storage. This can be achieved by spending only hundreds of pounds, not thousands, as it depends on the number of devices drawing power, their specific needs, and the efficiency of the chosen UPS. For more information on UPS and how to choose one, please watch the video below.

How Does a UPS Draw Power and How Do I Connect My Devices?

This topic can be challenging for some, so we will break it down and explain it in a simple way. Before delving into technical terms like Watts, Volts, and Power, let’s use an analogy that’s easy to understand. Imagine receiving electricity to your device as drawing water from a tap.

To understand this concept, we can use an analogy of a tap and water. Just like a tap needs water and pressure to deliver it through the pipe, an electrical circuit needs electrons and voltage to deliver electricity to a device. The water represents the electrons that carry electricity from the power source to the destination device, like a NAS, DAS, or PC. The tap represents the destination device and the water/electrons are going around in a circuit back to the water/power source, which is mostly unseen in the cables.

The pressure in the analogy represents the VOLTAGE, which is the strength of the electricity being pushed by the electrons in the circuit. It’s important to measure this as some devices are designed to only accept a specific amount of voltage. If the voltage is too high or too low, the device will not function correctly.

AMPS represent the amount of electrical charge that passes a given point in a second, similar to how much water passes through the pipe per second.

So, now we need to know the WATTS of the device. This is compiled with the following equation:

 

AMPS x VOLTS = WATTS

or

Water Volume x Water Pressure = Water Power

How a UPS works with your NAS smartIf you’ve ever experienced weak water pressure in a shower while living in an apartment on a higher floor, this is likely due to the water pressure not being strong enough to deliver the water to the destination device. Similarly, a smaller battery pack is often measured in milliampere-hours (mAh), which represents the amount of charge available, rather than time. Using the analogy of water, this would be like a large drum of water. The amount of water and how fast it travels from the drum is not as important as the available water that can be carried over to the tap. The output and result is heavily affected by the AMPS and VOLTS, similar to the pressure of water and the maximum or minimum amount of water the tap can receive.

Choosing the right UPS Battery for your Home or Office

The majority of UPS devices have a similar setup. You connect one end to your main power outlet (3 Pin, 2 Pin, etc) and the UPS has multiple ports for connecting your destination devices (PC, NAS, etc). Inside the UPS chassis, there is one or more batteries that are charged from the wall plug, while your devices are powered directly from the wall and not drawing from the batteries unless there is a power failure. In the event of a power failure in your home or business, the destination devices will switch to drawing power from the batteries, giving you time to save your data and shut down your devices safely, protecting your digital storage from corruption or loss. It’s worth noting that when buying a UPS, there are many figures to consider, but the power drawn by computing equipment is typically measured in Watts or Volt-Amps(VA).

How a UPS works with your NAS diagram

BUT

The power in Watts is the real power drawn by the equipment.Volt-Amps are called the “apparent power” and are the product of the voltage applied to the equipment times the current drawn by the equipment.

Inexpensive UPS devices typically have a shorter running time because they don’t provide as much charge. Mid-range UPS devices, on the other hand, offer longer charge times, more features, and additional functionality such as network alerts, internet alerts via SMS or email, an LCD display, USB connectivity for maintenance, and the ability to automatically save or shut down certain NAS or PC machines in the event of a power failure, eliminating the need for manual intervention.

There is more to choosing the right UPS than matching the WATTS of your destination device and that of the UPS

UPS capacities are giving in VOLT-AMPS , not WATTS

Remember again,

VAULTS x AMPS = WATTS

Well, Resistance present in electrical load means that the WATTS cannot be matched Like for Like. So:

How long does a UPS lastHow do I Choose the Correct VA for the Watts on my NAS, PC and more?

You will need to consider a UPS with a VOLT-AMP 50-70% higher than the WATTS present on your destination device. Don’t forget to factor into your consumption any other devices that are drawing from the UPS, as this consumption is not per device, but TOTAL.

What is Line Interaction on a UPS?

Some UPS devices have a “Line Interactive” feature that can strengthen a weak or inconsistent power supply, particularly useful for those in remote areas where maintenance may be less frequent. When it comes to sizing a UPS, it’s important to note that equipment nameplate ratings are often in VA which can make it difficult to determine the Watt rating. To avoid oversizing the UPS, it’s recommended to configure the system such that the VA rating of the load is no greater than 60% of the UPS VA rating. This will prevent exceeding the Watt rating of the UPS. However, this approach may result in an oversized UPS and a longer run time than expected.

– Battery Packs, Listed in VOLTS and can be added to an existing UPS

– Replacement Battery Cartridges, an Internal Upgrade, RANGE specific

– Available in Desktop or Rack mount

What Are the most popular brands in the UPS Market?

There are many brands that provide UPS (uninterruptible power supply) devices in the market, but some of the most popular ones include:

  1. APC (American Power Conversion) – APC is a well-known brand that has been providing UPS devices for many years. They offer a wide range of UPS devices, including standalone units, rack-mount units, and network-grade units. They also offer a variety of software and accessories to help manage and monitor their UPS devices.
  2. Tripp Lite – Tripp Lite is another well-known brand that provides UPS devices. They offer a wide range of UPS devices, including standalone units, rack-mount units, and network-grade units. They also offer a variety of software and accessories to help manage and monitor their UPS devices.
  3. Eaton – Eaton is a well-established brand that provides UPS devices. They offer a wide range of UPS devices, including standalone units, rack-mount units, and network-grade units. They also offer a variety of software and accessories to help manage and monitor their UPS devices.
  4. CyberPower – CyberPower is a brand that provides a wide range of UPS devices, including standalone units, rack-mount units, and network-grade units. They also offer a variety of software and accessories to help manage and monitor their UPS devices.
  5. Schneider Electric – Schneider Electric is a brand that provides a wide range of UPS devices, including standalone units, rack-mount units, and network-grade units. They also offer a variety of software and accessories to help manage and monitor their UPS devices.
  6. Liebert – Liebert is a brand that provides a wide range of UPS devices, including standalone units, rack-mount units, and network-grade units. They also offer a variety of software and accessories to help manage and monitor their UPS devices.

These are just a few examples of the many brands that provide UPS devices in the market. There are many other brands available, each with their own set of features, specifications, and pricing options, so it is worth researching different options to find the one that best suits your needs.

How Do Synology, QNAP, Asustor and Terramaster NAS work with a UPS?

Almost all NAS drive brands support the use of a smart UPS, connected via USB for monitoring or via the network. That said, how each NAS system reacts to a power cut and switching to the UPS battery does differ. I recently tested the CyberPower 1500 system with a selection of 4-Bay UPS systems to see how each NAS brand’s hardware and software react. Below is the video for each brand. Just click the video, or you can open them up in a separate tab by clicking the title.

Synology NAS UPS Test

 

QNAP NAS UPS Test

 

Asustor NAS UPS Test

 

Terramaster NAS UPS Test

Recommended UPS for Different NAS Drives from Synology, QNAP, Asustor or Terramaster

Below are a number of tiered UPS systems for your individual power needs and budget. These are based on the Watts you need to cover and based on a single NAS  of different size each. This, of course, is just the tip of the iceberg and for more precise advice based on a whole office or server room of hardware, we recommend getting in touch with us directly using the Free Advice section (no commitment and the advice is totally impartial) so we can save you money as well as provide you with a solution that will help you sleep at night! All solutions that I recommend below have to arrive with at least 2 Years of Manufacturers’ Warranty, 2 Years of Battery Warranty/Replacement Coverage, USB and/or Network Support, NAS compatibility, provides at least 10-20mins of continued client operation in a power-cut, support of line interaction and AT LEAST 6x mains power points for devices

Budget/Basic UPS (No Frills!) for Value and/or ARM-Based NAS

For much more modest Synology or QNAP NAS setups, as well as factoring in additional home/office equipment I would recommend the following UPS Device.

  • 1-4 HDD NAS Drive with 90-120w PSU
  • 1x Desktop PC with 250W PSU and Laptops/tablets
  • 1x Router 30W internal PSU
  • + Misc Other Office Equipment (50W avg)
  • Floor or Tower Versions
  • No LCD available

Option – The Amazon Basics UPS, Available in different versions that cover 400VA to 1500VA,  6-8 Ports – Starts at $49

Find it on Amazon HERE


 

Best UPS for a 1-2-Bay NAS Drive for Home or Home Office Use

For much more modest Synology or QNAP NAS setups, as well as factoring in additional home/office equipment I would recommend the following UPS Device.

  • 1-2 HDD NAS Drive with 60-90w PSU
  • 1x Desktop PC with 250W PSU
  • 1x Router 30W internal PSU
  • + Misc Other Office Equipment (50W avg)

Option – The APC BE600M1 , Available in different versions that cover 550VA to 850VA, 7 Ports – Starts at $99

Find it on Amazon HERE


 

Best UPS for a 1-2-Bay NAS Drive for Business

For much more modest Synology or QNAP NAS setups, as well as factoring in additional home/office equipment I would recommend the following UPS Device.

  • 1-2 HDD NAS Drive with 60-90w PSU
  • 1x Desktop PC with 250W PSU
  • 1x Router 30W internal PSU
  • + Misc Other Office Equipment (50W avg)

Option – The APC BE650G2, Available in different versions that cover 185W to 520W, 8 Ports – Starts at $169

Find it on Amazon HERE


 

Best UPS for a 4-8-Bay NAS Drive for Prosumers

For much more modest Synology or QNAP NAS setups, as well as factoring in additional home/office equipment I would recommend the following UPS Device.

  • 4-8 HDD NAS Drive with 100-250W PSU
  • 2x Desktop PC with 250W PSU
  • 1x Router 30W internal PSU + Switch with 25W PSU
  • + Misc Other Office Equipment (100W avg)
  • Battery/Coverage Insurance ($500,000 Connected Equipment Guarantee)
  • Tower Style

Option – The CyberPower CP1500PFCLCD PFC Sinewave UPS System, Available in different versions that cover 850-1500VA (1000W), 10-12 Ports – Starts at $389

Find it on Amazon HERE


 

Best UPS for an 8-12-Bay NAS Drive for Medium Large Business and Video/Photo Editors

For much more modest Synology or QNAP NAS setups, as well as factoring in additional home/office equipment I would recommend the following UPS Device.

  • 8-12 HDD NAS Drive with 250-350W PSU
  • Rackmount entry point (factor in dual/Redundant PSUs)
  • 3x Desktop PC with 250W PSU
  • 1x Router 30W internal PSU + 10GbE Switch with 90W PSU
  • + Misc Other Office Equipment (400W avg)
  • Rackmount Style (Desktop alternatives available, but cap at 2000VA)

Option – The Tripp Lite SU3000RTXL3U Sinewave UPS System, Available in different versions that cover 750-3000VA (2400W), 7-9 Ports – Starts at $799

Find it on Amazon HERE


How Long do UPS Batteries Last?

The lifespan of a UPS (uninterruptible power supply) battery can vary depending on several factors, including the type of battery, the quality of the battery, the usage, and the environment in which the UPS is used. However, on average, a UPS battery should last between 3-5 years with proper usage and maintenance. Lead-acid batteries, which are commonly used in UPS systems, have a typical lifespan of 3-5 years. However, this lifespan can be shortened or extended depending on the usage and maintenance of the battery. For example, if the battery is frequently discharged to a low level, this can shorten its lifespan, whereas proper charging and maintenance can prolong it.

It’s important to note that the lifespan of UPS batteries can also be affected by environmental factors such as temperature, humidity and the amount of use. High temperatures and humidity can shorten the battery life, while keeping the UPS in a cool and dry environment can extend it. It’s also worth noting that most of the UPS batteries have an end-of-life indicator, which will alert you when the battery is no longer performing as well as it should. This will give you an idea of when the battery needs to be replaced.

In conclusion, the lifespan of a UPS battery can vary depending on several factors, including the type of battery, the quality of the battery, the usage, and the environment in which the UPS is used. On average, a UPS battery should last between 3-5 years with proper usage and maintenance. Keeping an eye on the end-of-life indicator and maintaining the battery in a cool and dry environment can help to extend the battery’s lifespan.

 

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       

       

      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      ASK YOUR QUESTIONS HERE!

      73 thoughts on “Choosing the Right UPS for your Synology or QNAP NAS Drive – Get it Right FIRST TIME!

      1. At this point I’m just debating on going with an Ecoflow or BluYetti lithium battery powered generator that has a UPS mode and just using that instead of having to deal with replacement batteries and just having the option to recharge another way seems clutch.
        REPLY ON YOUTUBE

      2. *@NASCompares* one thing that you did not mention, most of those NAS units (unless you run a huge massive 8 bay unit or something similar) are drawing so little power (less than 60-70W) that most proper UPS units are too over-powered for them, correct me if I am wrong, but if I have an APC UPS with a rating of 1600VA and I connect to it a NAS unit which only draws 60W, the UPS will fail to correctly function, let me know if I have got anything wrong on it but that is from my general knowledge. and those low-end UPS units (that look like a fat extension cord) are built so purely that I will not trust them for anything more sensitive than a router
        REPLY ON YOUTUBE

      3. When will the backup UPS guys get smart and sell a high capacity DC UPS? One that can support 12V and 19V outputs so we’re not charging DC batteries and then converting it back to AC just to power DC devices???
        REPLY ON YOUTUBE

      4. Just coming across the video, and you cover a lot of great info. The one point I didn’t see covered is this:
        – The VA / Watt rating is only the output capacity of the inverter, NOT the battery capacity
        – The battery capacity is very difficult to find, but if you dig enough, you can find something like:
        Battery Size: 12V/9Ah

        To get the 100% efficient estimated run time, you would multiply the V by Ah, to get Watt Hours, then divide by your load:
        12 v * 9 Ah = 108 Watt Hours

        This means, that while a 1500 VA / 1000 W CyperPower PFC can run 1000 watts of output, the run time will be VERY low:
        108 Watt Hours / 1000 Watts = 0.108 Hours ( or 6.48 minutes )

        However, this value is for a 100% efficient inverter, which doesn’t exist. Looking further into the CP1500PFC specs, it does list the run time:
        At full load: only 2.5 minutes!
        At half load ( 500 watts / 750 VA ): 10 minutes.

        While the capacity does commonly track a bit to the VA/Watt rating, a higher VA/W rating does not always mean higher Battery Capacity. Dig deep into the specs, and figure out your estimated run time to prevent serious disappointment, and buy the right run-time, the first time.

        If you want more geekery on the difference between VA and Watts, do a search for ‘power factor’ or ‘apparent power’ and ‘reactive power’.

        Hope this helps someone 🙂
        REPLY ON YOUTUBE

      5. You also should look at the power – time graphic where you can find out how long a UPS can deliver the power you need continiously. I always use a time from 10 till 15 min for the needed power.
        I even can tell you there are Brands who can deliverr a lot of power, BUT only for less then a few minutes !
        REPLY ON YOUTUBE

      6. Hi, so if I plug only one 4 bay NAS to the UPS I’m fine with the recommendation UPS for a 2 bay NAS – correct? I really don’t wanna plug anything else to the UPS than the 4 bay NAS…
        REPLY ON YOUTUBE

      7. Robbie, Thanks again for good overall info & at 23 min mark specific UPS ideas for different size NAS, PC, etc. Also at 20 min mark the concept of having multiple UPS units is good advice, too.
        REPLY ON YOUTUBE

      8. What about pure sign wave vs modified. I’ve seen the wave readings of some cheap UPSs which look outright sketchy. Can’t that cause damage over time if there a lot of power outages? Or are most NAS PSU’s pretty tolerant of garbage quality modified sign wave?
        REPLY ON YOUTUBE

      9. An observation from personal experience: Where I live, we experience a power outage only once every several years so I have been rather lax about buying a UPS. Well, we had a power outage due to a house fire in the neighbourhood. When the power came back on, the Synology ran as if nothing at all happened. On the other hand, the QNAP had several corrupted apps. They appeared to be still installed but would not run. And could not be uninstalled. I had to go the the App Center, download the apps, and then reinstall them.
        REPLY ON YOUTUBE

      10. Just to share my experience I deeply regret buying an APC UPS (Bz1500Xlbi). I literally thrown it on the trash last week, after only 6 months it wasn’t sustaining its own batteries for no longer than 8~10 seconds with only one single router. If the NAS was attached to it was just instantly. Even worse than not using UPS at all since the NAS starts its shutdown process but gets interrupted.
        REPLY ON YOUTUBE

      11. Would the ecoflow river 2 work as a ups? “It can be an emergency power source (EPS), which will have the same result as UPS for most electronics. Here’s the difference. When your RIVER Pro is plugged into the wall, anything plugged into it gets power from the grid, not its battery. If power from the grid stops, RIVER Pro automatically switches to its battery supply mode within 30 milliseconds. That means anything connected will not have power for 30 milliseconds, which may mean sensitive electronics like desktop computers and data servers turn off. Test your devices individually to see if they need UPS to stay powered.”. I’m looking for an affordable lifepo4 solution.
        REPLY ON YOUTUBE

      12. Not really informative video. Let me explain…
        What we’re interested on when buying UPS, are two things:
        1. How much power UPS can deliver
        -although that’s covered in this video, it’s basically only told what we can see from specs anyway. For example, what does 950VA mean? In electricity VA is voltage multiplied by current (V x A) and result is power (W). So it “appears” that 950VA UPS should be capable to deliver 950W. Obviously that’s not the case, because specs says it can deliver max 520W and so in this case VA means nothing -is just a product label (bigger number means “more”).
        2. How long can UPS supply specified max (or lower) power?
        -this very important question isn’t covered in video at all. So for example, if we connect PC (~300W), monitor (~40W) and NAS (~20W) to 950VA UPS, how long will system run? The answer is… Inside 950VA UPS is usually a 12V 9Ah battery and such battery can deliver max 12V x 9Ah =108W/h. We should keep in mind that this is only theoretically possible. In reality (battery losses, voltage conversion losses) resulting power (efficiency) is only about 50W/h -not that much, huh? So, how long will our 360W system run on our UPS? 50W x 60minutes / 360W = ~8minutes -if battery is new and fully loaded.
        REPLY ON YOUTUBE

      13. Hi, I am planning to buy the ups on 30:16 SMT3000RMI2U on the left. I am worried that it won’t be detected on the QNAP nas since I couldn’t find it on any compatiblty list. Is it compatible with the QNAP NAS?
        REPLY ON YOUTUBE

      14. What UPS to use just for 4 bay NAS and router for central Europe market? There should be a minimum power draw for UPS to work properly, so I need something that would work just for 923+ and RT2600. Any recommendations? And what about the differences and significance of pure sine wave vs stepped sine wave for NAS usage.

        Thnx
        REPLY ON YOUTUBE

      15. I used APC for what seems to be two decades for large scale events, office and home use as they were the only game in town. However service was not good in my country so when something went wrong you basically had to buy a new one. Also trying to work out what the various beeps meant when something went wrong, or muting it, was simply arcane. Switched 3 years ago to using Cyber power with a visual display. WOW. I am in love. Had to replace one under warranty and it was a simple exchange. Also, a tip I don’t see covered here yet, is that you only need the UPS to communicate with ONE of your Synology’s as the others that are connected to the same UPS on the same network, are able to be set up to use your main Synology to tell them when the power is down, and then shut down easily. So I have some old dumb UPS units that will see out their lives being a simple battery with out them communicating to their respective devices as the main Cyperpower is able to do so via my main Synology. I wish the Windows Servers I used to use were this intelligent.
        REPLY ON YOUTUBE

      16. EXTREMELY HELPFUL! I needed this as I am looking for a PSU to help preserve my NAS in the case of a high volt situation (I had one and it destroyed my previous APC PSU but it saved my PC, TV).
        REPLY ON YOUTUBE

      17. Good guide. I’ve recently installed a UPS for my Synology and I was shocked how many times it kicked in over just 1 month! Quick question, will it be better to use the UPS to turn on/off the NAS or use WOL? Could you make a tutorial on how to set these two options up?
        REPLY ON YOUTUBE

      18. Good one ????I’ve got 1 upright 600VA/360W Riello UPS covering 3 light weight servers and network gear (wifi using PoE). One is primary and if there’s a power cut, it’ll tell 2 of the servers to turn off, before turning itself off. Smart! Most of the time it’s running at 30% usage (1 server+network gear), when everything is on it runs at 80%, but that’s rare (once every 2 weeks perhaps).
        REPLY ON YOUTUBE

      19. Just wondering, for a bigger setup, wouldn’t it be better off getting one of those high capacity portable power unit. Like Bluetti and Ecoflow? Not sure if they have a passthrough option. Just wondering.
        REPLY ON YOUTUBE

      20. Hey, YouTube advice here: if you want your video to get watched, then an “Easy Guide” should be under 5 minutes long. Perhaps make a second channel for the short Easy videos and keep the long form stuff separate.
        REPLY ON YOUTUBE

      21. I run a Eaton Ellipse ECO 800 USB on my DS1621+ (3x MG08ACA16TE HDDs +1x Crucial 240gb ssd for 12 dockers)
        Aswell as TL-SG1008P poe+ switch, TL-EAP 245 Access point aswell as my Router PCEngines APU3 OpnSense.

        All last around 20-25 minutes on full power backup.
        More than enough of time for em all to auto shut down.

        It is what it is.
        REPLY ON YOUTUBE

      22. Hi… well… your recommendations at the end are a bit confusing, because you mix the clients with the NAS when considering the Wattage… i have a Synology DS1821+ and i bought a Eaton 1600VA for it and my network hardware (Ubiquiti USG and Switch and also the internet provider router)…. NO PCs connected there…
        REPLY ON YOUTUBE

      23. A minor point if I can.
        Sometimes the transitions / dissolves are too quick to read the point before you start talking to it.
        I found myself a couple of times rewinding the video or pausing it, so I had the context for your comments.
        REPLY ON YOUTUBE

      24. You did another video about 6 months to a year ago that I saw shortly after I bought a ups only to find out it wasn’t on the Synology tested and list. I appreciate the work you do and if I had looked for videos first I wouldn’t have an incompatibility issue. I only looked for videos afterwards because I was having issues with my Synology recognizing how much battery remains. I don’t have the option to let it run till the battery is low and shut down cuz it thinks the battery is low after like an hour when I have over half left according to the display on the ups. So I just set it to shut down after 30 mins and then restart after power comes back online. Thankfully that part works well. After all there’s no reason I really need to run my nas for an extended period on battery. The primary reason I bought a ups was to protect it from data loss in a power outage. So as long as I have enough power to shutdown properly I’m happy.
        REPLY ON YOUTUBE

      25. I run 3 APC 1500’s. One for the NAS, An ext drive for NAS backup, Modem, Router & Switch. One for the PC while supporting external drives & fans. One for my Desktop employing the monitor, desklamps, and ,minor accessories such as phone chargers. All are managed and monitored via software. This balances a Net result of about 3 hours of total high power usage. Smaller items can be taken offline, such as desklamps, external drives, etc. thereby increasing the time. One time I had a power failure and didn’t even know it until I went to the fridge. All 3 switched with absolutely no delay or hiccups. Lovin’ it !
        REPLY ON YOUTUBE

      26. One consideration with a UPS is cable management… because it makes cable management a massive pain in the ass.

        With a standing desk that can lift up and down, you would normally just clip a surge protector power strip to the back of the desk and plug everything into that, easy peasy. But with a UPS on the floor, you can’t really do that. Your only real options are to find exactly the right length power cables so you can run them neatly to the UPS but with enough slack for the desk to go up and down, or just never take the desk up.

        I went with the latter option out of laziness, so my desk is a rat’s nest of cables underneath. Most devices having wall warts, external power supplies, etc instead of internal power supplies and ATX power cables REALLY doesn’t help.

        The dream is to have the house wired for ethernet with a network rack and a server rack, so then you can just use rack mounted UPSes for most things and only need a floor UPS for big ticket items like desktop PCs, but that’s a lot of expense.
        REPLY ON YOUTUBE

      27. Nice video, very informative again!
        PS: I would recommend to put the text in-between segments a wee bit longer please, I often have to rewind and pause to read..
        I noticed that indeed often only the VA-value is provided and I think/believe because those UPS have a selectable(!) output-voltage? (irrespective from the input line-voltage) Plus you will need the V and A values for your wiring, circuit-breakers and such. And not forgetting power factor/reactive loads etc.
        BTW., if you do not have enough plug-points, some UPS manufacturers do have “special” UPS Power Strips. Of course always do pay attention to the ratings!
        Very, very important note: If you go for a UPS, pay attention if it supports SNMP out of the box or you need a (smart) optional network-controller. (= additional costs) Nowadays many UPS do have an ethernet-connection out of the box but that is often cloud-based only (yeah, go figure) and not for your local network integration unless you use their own App.
        REPLY ON YOUTUBE

      28. This was very helpful to me. I did not knew I could do this. I plugged in the USB cable my 251 to my Eaton UPS and it just worked like you showed us. Thank you and nice socks by the way!
        REPLY ON YOUTUBE

      29. What would happen to an expansion unit that’s attached to the synology? Would it go in to safe mode along with the main unit when power dropped, or do you have to configure it separately?
        REPLY ON YOUTUBE

      30. Thank you for this video! I also bought a QNAP TS-251D, and i’m looking to buy a CyberPower CP1500AVRLCD, which I feel is kind of a must/insurance for a NAS, right?
        My power tends to blink, or go out for 2-8 hours, randomly every other month. Old trees falling, new homes being built, and maintenance or wires being hit…
        Would a full shut down be best? Or think that I could get away with just standby?
        Basically, which is healthier for the NAS? I only plan to have the NAS connected.
        I only use the NAS for media backup, and eventually playing backed up DVD’s. Only two 8Tb drives in raid 1.
        But if power is out, I don’t need the NAS to be on…
        REPLY ON YOUTUBE

      31. Thank you CyberPower for making this video possible and to NASCompairs for being awesome as usual. I now understand how important having a UPS attached to my NAS is and waisted no time in getting one and getting it configured. Thank you
        REPLY ON YOUTUBE

      32. So what happens if your power is out for extended period of time in that standby mode you selected and battery runs out. Is the data safe on reboot? When the power comes back on will it still reboot itself or will you need a manual reboot?
        REPLY ON YOUTUBE