Plex vs Jellyfin vs Emby on a NAS? Which is Best?

Which is the Best NAS Media Server Tool – Plex, Emby or Jellyfin

Although modern Network Attached Storage (NAS) devices can be used for a multitude of purposes, there has always been a large percentage of users who buy a NAS from the likes of Synology, QNAP, Asustor and Terramaster (or go full DiY/Open Source and opt for TrueNAS) in order to host their own multimedia server. If you have been out of the loop this last decade or so, then you might not be aware that the standard of media server software and ease of use has evolved incredibly and when it comes to NAS drive multimedia streaming, there are THREE big players in this arena – Plex, Jellyin and Emby. These three platforms (alongside many others, including tools such as Video Station from the NAS brands themselves) have allowed users who own DECADES of digital media (Movies, TV Shows, Music, Photos, eBooks, Comics, etc) to not only access them conveniently remotely from the comfort of their soft/hotel room/commuter train/beach – but also do so with the slick graphical user interface that you would often associate with premium streaming services such as Netflix and Hulu. This is done thanks to massive only databases (such as TheMovieDatabase and IMDb) that mean that your years of multimedia is scanned, sorted, and arranged into searchable titles. It then adds boxart, movie posters, cast lists, trailers, synopsis, trailers, extra content and more. Suddenly your dull breadcrumb ‘file/folder’ pile of media takes on an insane quality level and you have your very own personal Netflix – BUT CRUCIALLY YOU OWN ALL THE MEDIA!! That is the appeal of media server software like Jellyfin, Plex and Emby!

Jellyfin

VS

Plex

VS

Emby

Truly Open Source? Premium Package? The Middle Ground?

Although all three are quite similar on the face of it, all three have appealing design, interface, cost and customization choices that will almost certainly make one of them more suitable for you than the others! All three are supported by the bulk of modern NAS platforms, with via an available app in the brand’s official app center, available via a 3rd party app center (see QNAPClub or Synocommunity for example) or allow you to create a container within the NAS software and run from there, but there are definitely distinctions between all three that you might want to know before taking the plunge on your new multimedia server setup! So, today I want to go through all of the differences between Plex, Emby and Jellyfin media servers and, hopefully, by the end help you decide which is best for you!

Note – A huge thank you to Protektor-Desura for his time breaking down these services and his permission to use his data. You can find out more about his ongoing project HERE.

Plex vs Jellyfin vs Emby on a NAS – What have they ALL got in Common?

Before we go any further, it is worth highlighting the things there are supported by all three of these media server applications. It needs to be underlined that regardless of your specific requirements, Plex, Jellyfin and Emby are all EXCELLENT media server applications and alongside a massive range of client applications to watch/listen/read your multimedia on your devices, they have all grown into platforms that rival most paid subscription streaming services like Prime, Netflix, Disney+, etc. Here is a quick snapshot of all the things that Jellyfin, Emby and Plex have in common:

Plex, Emby and Jellyfin ALL Support the following:

(Note – Some Services for Emby/Plex Require Subscription Services)

  • 1080p/4K Support
  • AV1 Compression Support
  • H.265/HEC Support
  • Metadata Scraping
  • Group Watching
  • Android/iOS Client
  • Amazon Fire TV App
  • Apple TV App
  • Roku App
  • Android TV App
  • Desktop PC/Mac Client
  • Hardware Transcoding
  • Live TV / DVR
  • Multiple Users
  • Offline Downloads
  • Smart Home Integration
  • TV/Movie Tracking

Now, there are a whole bunch of other things that Plex, Emby and Jellfin have in common (the above list would easily be 10x longer if I names them all), so I stuck with the most requested/sought-after features. But what about the things that they don’t have in common? Or those things that are locked behind a subscription/one-off-fee? Let’s begin with the first difference that many users consider the biggest hurdle – the cost of Plex, Emby and Jellyfin.

Plex vs Jellyfin vs Emby on a NAS – Pricing

Now, for many users, the idea that the media server software that they want to use on their NAS costing them MORE money is REALLY annoying! The whole point for many users making the switch AWAY from streaming services (Netflix, HBO Max, etc) is because they wanted to spend that money on the hardware to watch the media they own, as well as ensure that it’s not changed/removed from one money to the next. Now, unfortunately, this is only half the story! The fact is that media platforms such as Jellyfin, Plex and Emby have REAL PEOPLE working o them, as well as continued development (and that is not even factoring in security/stability/feature improvements in the software’s life) that all needs to be subsidized. The NAS brands DO NOT financially support them, the Streaming services actively avoid/discourage them and although users can always donate – the user vs donation ratio is obviously is painfully uneven. Therefore unless these platforms embrace advertisements and/or 3rd party sponsorship (which is a slippery slop for many), the more ambitious platforms need to find ways to fundraise their services in a way that doesn’t hurt casual/low-end users, but pushes the heavier users to support the service.

Here is how Plex, Jellyfin and Emby breakdown their costs:

Server License Fees

Jellyfin

Plex

Emby

Free Option? Yes, Completely Yes, but some services unavailable Yes, but some services Unavailable + Some Client Apps Need One-off payment
Monthly Free

Unlimited Users

Plex Pass

$4.99 (15 devices)

Emby Premiere

$4.99 (25 devices)

Yearly Free

Unlimited Users

Plex Pass

$39.99 (15 devices)

Emby Premiere

$54.00 (25 devices)

Lifetime Free

Unlimited Users

Plex Pass

$119.99 (15 devices)

Emby Premiere

$119.00 (25 devices)

So, IMMEDIATELY Jellyfin looks appealing, RIGHT? It’s totally free for the server application, client tools and (remember the chart above showing what all three support) has most of the same features as Plex and Emby. Although all three have free-to-use options, the ability to use ALL services and client tools is where the subscription services appear. Of the three, Emby works out the tiniest bit more expensive, but actually (when you work it out at the per-user vs cost) it is largely identical to Plex in costs. The main reason that Emby works out the most expensive technically is that although the Emby Premiere subscription is optional, some of the client applications (eg iOS, Android, FireTV, etc) require you to either have an existing Premiere subscription OR pay a one-off fee. Plex allows you to install the app for free on most platforms, but limits the range of supported services that you can use (eg, hardware transcoding, share watch, etc) without a Plex Pass subscription in place. Next, let’s dig deeper into those available features and services available in Emby, Jellyfin and Plex to see what is available, what differs and what is free/paid-for!

Plex vs Jellyfin vs Emby on a NAS – Features, Functions and Supported Formats

Now, as mentioned in the introduction, Emby, Plex and Jellyfin all support a whole bunch of services and features to help you enjoy a wide range of multimedia, in a wide range of formats and on a wide range of devices! But there is definitely some disparity when you dig deeper. Let’s go through the range of supported features of these three applications and see where they start to separate:

Features

Jellyfin

Plex

Emby

License GPL v2 Full Commercial Full Commercial
Client/Server Yes Yes Yes
4K Support Yes Yes Yes
ATSC 3.0 Support
(4K HEVC Main 10 profile at Level 5.2 Main Tier,
HDR, Dolby AC-4, MPEG-H 3D Audio)
No No No
AV1 Support Yes No Yes
Audiobook Support Yes No Yes
Bandwidth Limiting Yes Yes Yes
Camera/Photo Upload No No License
Collections Yes Yes Yes
Comic Book Support Yes No No
Commerical Skip 3rd Party Add-on/Free License No
E-Book Support Yes No No
Favorites and Tags Yes No Yes
Game Support No $2.99/Month Broken
Group Watching SyncPlay/Free Watch Together/License Limited/Free
Hardware Transcoding Yes License License
Internet Radio Support Yes No No
Intro Skipping YesPlugin Yes Yes
LDAP Support Yes No License
Live TV/DVR Support Yes License License
Lyrics No License No
Magazine Support Yes No No
Mobile Media Optimizer No License No
Mobile Sync No License License
Movie Support Yes Yes Yes
Multiple Plugin Repositories Yes No No
Multiple Users Yes License Yes
Music Support Yes Yes Yes
Music Video Support Yes Yes Yes
Offline Media
(Download & Play Offline)
Yes/Free License License
Parent Controls Yes License Yes
Per User Bandwidth Limit Yes/Free License License
Photo Albums Yes License Yes
Plug-in Support Yes No Yes
Podcast Support 3rd Party Add-on/Free No Yes
Recommend & Discover Yes Yes Yes
Remote Login Server Never Yes Yes
Server Backup No Yes License
Server Stats Playback/FreeReports/FreeEmbystat/Free LicenseTautulli/Free YesEmbyStat/Free
Sharing Libraries No Yes No
Simultaneous Login Limits Yes No Yes
Smart Home/Voice Control Alexa/FreeHome Assistant/Free Alexa/LicenseGoogle/Free Alexa/LicenseGoogle/License
Theme Songs and Videos 3rdParty Plugin/Free Yes/Songs only License
TIDAL Music
(Requires Subscription)
3rd Party Add-on/Free License No
Tonemapping CPU No Yes Yes
Tonemapping GPU Yes Yes Yes
Trailers & Extras Yes Yes Yes
Tuner Sharing No No No
TV Episode Support Yes Yes Yes
TV Guide Data Yes/3rdParty Add-on/FreefHDHR/Free License License
Virtual Reality No License No
Video Chapters Metadata DL No No No

Now, Jellyfin is the most open of the three (cough because it’s pure Open Source), and as good as that sounds, it is worth remembering that this does come with a downfall in platform development when compared to the platforms that get user-subsidy via subscription. Jellyfin is the less visually modern of the three (for those that care) and also throws alot of information at you on the server side, whilst not guiding the user as much. This results in a slightly steeper learning curve vs Plex and Emby. Emby also suffers from this a little, but also does a slightly better job of guiding the user through the experience. The main difference here is regarding the extent of open source! Of the three, PLEX is the one that is the closest to ‘the establishment’, it has long since shrugged off it’s free ‘indie’ type image, as it is the closest in design, appearance and presentation to subscription services. This is not necessarily a bad thing, as this results in a premium level of support, development and updates, connections with existing services and just generally a much better-presented platform overall (server-side and client-side) that is more user-friendly and intuitive – exactly what you would expect from the more premium presented/priced package in 2023/2024. However, this also results in the platform being alot more rigid, restricting optional add-ons and packages that are typically ‘unofficial’ (i.e. ones that Plex do not add to the service themselves). Equally, that Development vs Subsidy balance results in ALOT of the more exciting features being locked/restricted behind a Plex Pass subscription. This is initially understandable (again, see previous paragraph about supporting good work), but many users bulk at the idea of paying for a service, when they already paid for their hardware and said software will occasionally intentionally limit that hardware utility behind the subscription. Both Emby and Plex are guilty of this. Let’s talk about Hardware Transcoding!

Plex vs Jellyfin vs Emby on a NAS – Hardware Transcoding

What is Transcoding? Transcoding (also referred to as encoding, decoding and converting in similar means) is when a file is changed in order to be better suited to the destination client device that it will be enjoyed on. Here are some examples of when you might need to take advantage of transcoding:

  • You might own media in a specific compression (the technique used by the media industry to make cinema screen blockbusters into at-home watchable content, among other reasons), such as HEVC/H.265, but not have a licence to play it on your client device, a NAS that supports HEVC or have sufficient client-side hardware/permission locally to convert it
  • You might own 4K versions of your multimedia, but you want to watch it on a mobile device where a 480p or 720p version is much, MUCH more client power/hardware efficient to watch
  • You are on a limited internet/cellular connection (morning commute, hotel, coffee shop, etc) and need a compressed version of a media file streamed
  • Your media might be in an unsupported format (a hugely overlooked factor in audio formats) such as mp4a, FLAC, ACC, etc and needs changing

Transcoding can be done in advance (offline transcoding) or as/when the file is being accessed (known as on-the-fly transcoding) and that later one requires your NAS/Media Server to have sufficient hardware to change the file quickly enough to keep up with organic natural playback (i.e. it takes less than a second to convert/transcode a second of media). Now, you can use software transcoding (i.e the NAS will use raw CPU/System power to change the file, which is less efficient and less effective) or you can use hardware transcoding, which uses specifically available NAS system hardware (graphics card or CPU integrated graphics) to do the job, which is MUCH faster and MUCH MORE efficient. Where Plex and Emby hit a wall is that both platforms have put hardware transcoding support in their premium subscription services Plex Pass and Emby Premiere. This effectively means that the media server software is charging you to use the hardware in your NAS. This upsets quite a few people. Now, in their defence, hardware transcoding does require the software to be adaptive to different graphical hardware, requires time/energy invested in optimizing the software to take advantage of the hardware the best it can and is technically a more specialized media service/function that is not used by everyone – so in a way it makes sense tha this would be one of the optional settings to use as a means to subsidize development in their platform. However, the fact that Hardware Transcoding is available for free in Jellyfin is one of the strongest benefits that users that need this service will observe when comparing Jellyfin, Plex and Emby.

Plex vs Jellyfin vs Emby on a NAS – Supported NAS Hardware & Software Server Platforms

Although Plex, Jellyfin and Emby are all supported on the bulk of NAS platforms, the actual installation of them on NAS devices (from brands such as Synology ,QNAP, WD, Asustor and Terramster) or Custom built NAS servers that run on TrueNAS Core, TrueNAS Scale or UnRAID is not as straight forward from one media server app to the other. Here is how the three media server applications compare with it comes to installing the server-side application for Emby, Plex and Jellyfin:

Server OS

Jellyfin

Plex

Emby

Android No Yes Yes
Asusor No Yes Yes
Docker Yes Yes Yes
FreeBSD No Yes Yes
Linux Yes Yes Yes
MacOS Yes Yes Yes
Netgear ReadyNAS No Yes Yes
Nvidia Shield No Yes Yes
Open Media Vault Yes Yes Yes
QNAP No Yes Yes
Rasberry Pi Yes Yes Yes
Synology Yes Yes Yes
Terra Master No Yes Yes
Thecus No Yes Yes
TrueNAS No (docker supported) Yes Yes
WD My Cloud & My Passport No Yes Yes
Windows Yes Yes Yes

Straight away, you can see that the installation of Plex and Emby on..well..EVERYTHING is supported. Once again, that optional paid subscription model has evidently paid off! Not only is Jellyfin not available as a standalone installer on a large number of platform, but in some cases it can only be installed as a custom-built container application (requiring a container hypervisor such as Docker) and although this is not hugely difficult, it will be dependant on the end user to create it right, as well as the efficiency of the NAS hardware in question to run the container as efficiently as possible. Overall, when it comes to the installation of the server-side application for these three multimedia server applications, Plex and Emby are winning the race! However, this is just the client-side application (i.e the one running the media server on your NAS), what about the support of the client applications for all your devices? Let’s take a look.

Plex vs Jellyfin vs Emby on a NAS – Supported Client Apps & Player Devices

The success of your multimedia server is going to be based on the smoothness of how well your NAS runs the server slide Plex, Emby or Jellyfin application – but also HUGELY dependant on the quality and extent of how well it is supported on the devices that you plan on accessing and enjoying your multimedia (referred to as clients or client-tools). Although all three applications can be accessed via the majority of web browsers (Chrome, Safari, Edge, Mozilla, Opera, etc), the bulk of users want to access their media via their phones, laptops, Smart TVs and streaming boxes such as FireTV and Roku. The range of supported clients and the means/extent of their use is possibly one of the biggest areas of difference between Emby, Plex and Jellyfin that you will find! Here is how they compare:

Clients

Jellyfin

Plex

Emby

Android Free (Google Store)Free (F-Droid Store)Free (Amazon Store)MrMC $2.99 $5 or Server License $5 or Server License
AndroidTV Free Free $5 or Server License
AppleTV FreeInFuse $.99/month, $9.99/yearly, or $74.99/lifetimeMrMC $6.99 Free $5 or Server License
FireTV Free Free $5 or Server License
GoogleDaydream VR No $5 or Server License No
iOS Free $5 or Server License $5 or Server License
Kodi Jellyfin-Kodi/FreeJellycon/Free PlexKodiConnect/Free Embycon/Free
LenovoMirage Solo VR No $5 or Server License No
Linux Free No No
MacOS Free Free $5 or Server License
OculusGo VR No $5 or Server License No
Roku Free Free Free
SamsungGear VR No $5 or Server License No
Sonos DLNA Free DLNA
SonyPlaystation 3 DLNA/WebBrowser Free DLNA/WebBrowser
SonyPlaystation 4 DLNA/WebBrowser Free DLNA/WebBrowser
Tivo DVR Box No Free No
Tizen(Samsung TV) Free/Not in Store Free Free
WebBrowser Free Free Free
WebOS(LG TV) Free Free Free
Windows Free Free $5or Server License
Xbox360 No Free No
XboxOne FreeVideotape/Free Free $5 or Server License

So, let’s break this down a little. In the case of Jellyfin, the application continues to be largely free and available on the bulk of currently used client hardware platforms. I say ‘largely’, because in some cases Jellyfin is not available as a direct client application for those platforms. You will need to use 3rd pary tools/plugins on some client hardware, some apps are glorified browser tabs with a lite GUI on top and some need to have a small fee to maintain their existence on certain app centers. Emby on the other hand is available on more platforms than Jellyfin, however, a large number of those platforms require you to either have an existing Emby Premiere subscription in place in order to download/use them or need you to pay a fee at the app center in order to use them. Finally, we have Plex, which is the one that seems to be the most freely available client application, widely available native installer client app and has much fewer instances of app-payment requirements than Emby.

Now there IS the argument that Emby and Plex need to subsidize these apps being hosted on these app centers, as their continued appearance there and patches being developed over time needs funding. But I do think the availability and potential pricing of these tools is something that is not advertised enough and something that many users do not realize until AFTER they have invested a bunch of time setting up their respective Emby/Plex Media server on their NAS. Jellyfin is clearly the one that is trying to keep itself Free/Open-Source as much as possible, but that comes with limitations on how far they can stretch themselves and the ease of installation on client devices in some cases.

Plex vs Jellyfin vs Emby on a NAS – Conclusion

Choosing between a Jellyfin, Emby and Plex Media Server NAS for your massive multimedia collection is one that going to be about the extent you are going to use it! If you are looking to create a simple media server that is largely accessible everywhere, but has lots of users, is user-friendly on both the server/client side, won’t need all the bells and whistles of a higher-end media enthusiast and you are just looking for a pretty way to enjoy your existing media that compares with premium subscription services – GO FOR PLEX!

If you are looking for a moderately customizable and featured multimedia server that gives you a good balance of control, usability and hardware support, but where the pricing can be a lot more flexible/ad-hoc (i.e one off payment per client of $5) and want the slick GUI, but also the option to customize it and take advantage of a few community add-ons – GO FOR EMBY!

Finally, if you are much more of a multimedia enthusiast, have a wide range of different media formats (i.e Audio, Video, literature and more), want to be able to link a large number of other services/tool and want to take advantage of the full extent of your NAS hardware (but are prepared for a slightly higher learning curve) – GO FOR JELLYFIN!

In summary, here are the pros and cons of each:

Clients

Jellyfin

Plex

Emby

Pros
  • Largely FREE on the client and Server side
  • Supports Many more formats of media
  • Wide range of supported Plugins
  • Live TV / DVR Services are free to add
  • Much more customizable
  • Much more hardware efficient
  • Offline Downloads Supported
  • Easiest to setup on Server/Client side
  • Massive available as a client/server application with widest support
  • Very User Friendly
  • Optional Premium Support/Service options for Users
  • Technically cheaper than Emby
  • One-off app payment vs regular subscription will appeal to some users
  • Phone Camera Upload Support
  • More Customizable than Plex, in add ons and GUI
  • More Client/Server apps available than Jellyfin
  • More media analytical tools than Plex
Cons
  • Steeper learning curve
  • Fewer ready-to-go installer applications on client/server side
  • Lacking some System config backup options vs Plex/Emby
  • Lacks Premium/Paid support/Service option
  • Some Subscription/Paid restrictions
  • Hardware Transcoding PLEX Pass barrier is annoying!
  • Offline Downloads behind Subscription Service
  • Lacks customization and Add ons of Emby/Jellyfin
  • Live TV / DVR Support is behind Subscription
  • Hardware Transcoding behind Subscription
  • Live TV / DVR Support behind Subscription
  • Offline Downloading behind Subscription
  • Not quite as widely available as Plex


If you are thinking of buying a NAS, please use the links below as it results in us at NASCompares receiving an affiliate fee from Amazon:

Need More Help Choosing the right NAS?

Choosing the right data storage solution for your needs can be very intimidating and it’s never too late to ask for help. With options ranging from NAS to DAS, Thunderbolt to SAS and connecting everything up so you can access all your lovely data at the touch of a button can be a lot simpler than you think. If you want some tips, guidance or help with everything from compatibility to suitability of a solution for you, why not drop me a message below and I will get back to you as soon as possible with what you should go for, its suitability and the best place to get it. This service is designed without profit in mind and in order to help you with your data storage needs, so I will try to answer your questions as soon as possible.

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       
      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      ASK YOUR QUESTIONS HERE!

      88 thoughts on “Plex vs Jellyfin vs Emby on a NAS? Which is Best?

      1. Appreciate all your work mate. For a few days now I am watching your content to educate myself to make an educated decision which NAS to buy, what to look out for etc.

        Thanks ????
        REPLY ON YOUTUBE

      2. Great content as always. I think there’s too much emphasis on “you need a plex pass to be comparable”. Lifetime plex pass for 100$ to me kind of makes any argument about a feature being behind that paywall irrelevant. At the end of the day, I think it’s would be a better review to just stick to overall capabilities. I am building by own NAS and have spent $ on hardware and potentially software (unraid or whatever). The cost of plex pass is pretty minimal in the grand scheme. Sure – it’s “one more thing” but it really shouldn’t be a determining factor. If plex doesn’t do something you need or doesn’t do it as well as jellyfin, that should be called out (or visa versa). Just my 2 cents.
        REPLY ON YOUTUBE

      3. I have a Synology DS-923+ just getting it running. Can you use a Zimaboard for hardware transcoding on Jellyfin and Emmy? I saw a video using Zimaboard with Plex. Love your videos.
        REPLY ON YOUTUBE

      4. I have Emby and do not pay anything. Any of the paid options are not something I need. When I watch a movie on my phone, I watch it at 480p instead of e.g. 4K to save data. No problem ever. I also do not need to pay the app on my Android. So not sure what that 5USD is about. The best is to see if you actually need the paid things. Because it might well be that you do not need to. I know I do not need it.

        The only thing that is a bit of a downer is that I can not download subtitles when I am watching the video, but I can when I go to the file before I start it.
        REPLY ON YOUTUBE

      5. late to the party. The transcoding part is a load of UTTER rubbish. The commentary states he is comparing “Hardware” transcoding. Plex’s dropdown, as shown, is CPU only transcoding. That is “software” transcoding. Jellyfin’s dropdown is for real hardware transcoding.
        REPLY ON YOUTUBE

      6. Plex freezes my TCL Android TV if I try to browse my movies with it.

        It is better than jellyfin in that it feels slightly more refined and for some reason jellyfin can’t look for new subtitle out maybe I don’t know how to use it but that’s an issue I’ve seen.
        jellyfin is more stable on the TCL Android TV though.
        REPLY ON YOUTUBE

      7. JF is 5 years behind in development. And they are not catching up because there is only couple main-developers that walled off from the “free dev community”. There is PRs open in JF since three years! Nothing is implemented because the Jellyfin-Devs have their own “master-plan” and they sleep most of the time. In my opinion they just use the reference to JF to make their reputation as IT-Consultants bigger through github. It’s is basically abandoned by now unfortunately. I wanted it to succeed very much but in order to progress someone would have to fork it again. They haven’t even managed to remove the references to Emby in JF in all those years. They seem not to understand the code at all. And the very needed update for the database also not coming. Emby has implemented it years ago.
        Also you should read about reputation of Luke, the head-developer of Emby. He is active in the community since a decade and has developed pretty popular application WMC. This guy knows what he is doing. If you are serious about such a media-server you should go definitely with Emby. I am quite sure that on the long run everybody will get to the point of dissatisfaction with JF, especially since important plugins/addons can suddenly stopped from being updated because the maintainers decided to do something else and also because customization is pretty bad.
        REPLY ON YOUTUBE

      8. I tryed jellyfin, and i can’t access to it outside my home and the help is non-existent. Did emby is the same when trying to configure remote access to my content? Did i have to configure third-party software or reverse proxy, dyndns or anything else?
        REPLY ON YOUTUBE

      9. I’ve had PLEX since there were just starting. Paid for the Lifetime membership hoping for the best. Unfortunately, there are MANY ISSUES with the service and there is NO TECH SUPPORT! PLEX’s idea of tech support is to LEAVE THEIR PROBLEMS TO OTHER USERS TO TRY AND FIGURE OUT PLEX’S PROBLEMS WITH WORK-AROUND FIXES. There is NO direct line for TECH SUPPORT, ZERO, ZIP, NADA!
        You have to post your problems to “THE COMMUNITY” and HOPE someone else has found a way to correct the same issues you are having OR EVEN READS YOUR POST. If you try to send a email to them for help you get a robotic reply with a link that does NOT WORK to submit your question to “THE COMMUNITY”. TOTALLY USELESS! I have spent, now, over 6 hrs looking for a fix for my latest problem.
        If you get PLEX, YOU ARE ON YOUR OWN. Don’t expect help from them at all. Buyer beware!
        REPLY ON YOUTUBE

      10. What sucks with plex is codec support. Dolby Vision, DTS-HD, and TrueHD. It also transcodes in x264 instead of hevc which pretty much everything supports natively now days. I do a lot of streaming in hotels (doing it now) and the image quality with hevc would be better on this limited bandwidth.
        REPLY ON YOUTUBE

      11. So, I have a QNAP NAS and access my NAS media through Kodi on my TV. I just add NFS connections to the various Movie and TV folders on my NAS through Kodi. Is there some downside to that, that I’m missing? Because it’s very easy to set up and you can also install Kodi on anything and have the advancedsettings.xml file reference a SQL database hosted on the NAS if you want every Kodi instance to show the same media and your watched progress.

      12. My decision to switch from Plex would be: does it have season-specific special features for TV Shows? Does it have multiple airdates per country? (I have foreign versions of US shows that aired on a different date and want to preserve that). Does it have an aired today category/pivot on the recommended screen? Does it allow me to create my own custom channels and schedule shows so my wife can watch all her Jane Austen stuff on a channel and I can watch Star Trek on my own Star Trek channel? Does it allow movie pre-rolls dependent on various criteria (holiday, season, date, genre, series, etc.)? If Emby or Jellyfin could do that, I might switch
        REPLY ON YOUTUBE

      13. The big problem with Jellyfin is that you have to jump though so many hoops in order to download it which makes it really hard, You have a great step by step guide on how to install Jellyfin on Synology. Emby is just easier to use and setup as compared to jellyfin
        REPLY ON YOUTUBE

      14. Big JellyFin fan here. Love it. Once Plex started forcing me to “login” to their app I bailed. Prefer staying offline and only connecting to my LAN so everything is well fortified.
        REPLY ON YOUTUBE

      15. The only things Jellyfin don’t support are niche and basically irrelevant to your weird uncle.

        Jellyfin supports ISO. Plex arrogantly refuses to. End of discussion for me.
        REPLY ON YOUTUBE

      16. Thank you for the time you have put into these comparisons. I have had a lifetime Plex pass for over 10 years, but switched to Jellyfin two months ago. Maybe my observations will help someone, sorry if it gets a bit wordy..

        First, Plex is spending their time working on adding streaming services. For the purposes of a self hosted media streaming application, those are clutter (my opinion). Each update pushed my personal folders back off the main page, behind these ad supported streaming services, requiring me to set them up again. Second, Plex is constantly “phoning home”. Set up a Pi-Hole and just see how many connections Plex is constantly making even when the server is sitting there idle. Third, if you are in an area where you sometimes lose internet access, and someone tries to switch users.. you can’t connect to the server from that device until internet access is restored. That last one was the spark that made me decide to switch. Lines got damaged last winter and it took almost a week to get our home internet back up. By the end of that time none of our devices could access the server. Seemed kind of pointless to have a self hosted media server you can’t connect to without internet access. Jellyfin handles user authentication locally, so if you can see the server on the network you can authenticate.

        From the server side, Plex is more refined. That is to be expected from a paid app, but it is surprising how good Jellyfin is. Transcoding is easier to set up in Plex, but if you have the space you can do the transcoding in advance for the devices you intend to use and that’s no longer an issue (which is what I do). Plex is also more tolerant when setting up Metadata.. if you inadvertently name a folder “Season Two” instead of “Season 2” Plex didn’t seem to notice, but Jellyfin absolutely got lost and I had to correct a lot of those kinds of errors. I didn’t find either of the servers difficult to manage, but you definitely need to be more aware and intentional when setting up Jellyfin.

        The user experience in Jellyfin seems much less cluttered and substantially more responsive. Whether on a Roku or a tablet the Jellyfin app opens nearly instantly, whereas the Plex app takes a few seconds. This isn’t something that was troubling in Plex, it takes about the same amount of time to open the Plex app as any other streaming app.. but now I recognize that time delay is because of the offsite connection Plex makes. Jellyfin opens more quickly because everything happens on the local network. I have also noticed that Jellyfin seems to do a better job bookmarking where you are in a movie or series. In Plex I always had to remember where I was in a series because it would get stuck from time to time. Jellyfin will remember, user by user, where someone is and return to that spot.

        I don’t think either one is difficult to set up or manage. I honestly expected less from Jellyfin, being an open source project, but was very pleasantly surprised. There are a few services it doesn’t offer or do as well, such as music management and streaming, but I didn’t really take advantage of those in Plex so their loss wasn’t a big deal to me. If all you want to do is stream your personal video collection on your own network Jellyfin is the way to go in my opinion.
        REPLY ON YOUTUBE

      17. Yep would not touch Plex with a barge pole, jus too intrusive, nosy and if I understand right needs Internet access to function. Happily paid what worked out to be £99 GBP for lifetime. It is a bit annoying that have to pay for premiere to watch on iOS and Android but I would not say the cost of premium is that bad if paying for lifetime. Jellyfin needs docker on Synology which kind of puts me off a bit.
        REPLY ON YOUTUBE

      18. I’m still a Plex user (with liftetime I got on sale a lonnng time ago) but slowly starting to explore Jellyfin. Setting one up to slowly test it out. Plex has been slow to roll out some things and seem to be focused on the wrong features for me. Example plex still doesn’t work with latest over the air codec but seems Jellyfin might be able to work with some tweaking. Without any research video is already working, just not audio.
        REPLY ON YOUTUBE

      19. I’ve used Emby for about three years, and while the server is competent, the clients have their problems. The version for Android TV, in addition to being paid, had a horribly optimized interface. I never considered paying for premiere because my NAS didn’t have the capabilities to take advantage of the extra features of the subscription. When I changed my NAS and it had such capabilities, I realized that it wasn’t worth paying for the only feature I wanted to use, transcoding. So I opted for Jellyfin. So far I’m finding him superior to Emby. Transcoding works fine and clients are better optimized. My only gripe is with the subtitles. Advanced options are only available when I choose another player (default is ExoPlayer) and subtitle options don’t always work well. Strangely, the Android mobile client works perfectly.
        REPLY ON YOUTUBE

      20. Great video. I have a Qnap Nas, and I have used all 3 of these applications. For me Emby is my favorite. I am a person who loves customization. I want to visually change as much as I can, and craft it the way I want it. I loved Plex, but Emby exceeded my expectations of available customizations. For that reason I don’t mind paying the price for premiere. Just like a lot of services, and applications, it comes down to what your wants or needs are. All 3 of these are good, but for me Emby is my number one.
        REPLY ON YOUTUBE

      21. I Run Jellyfin on Truenas Scale, My use case was “the internet is down” streaming. Something that is kinda hard with Plex’s must-phone-home even for local use made it less than ideal in my use case. I have no one outside my house that I will stream to, so why pay for that.
        REPLY ON YOUTUBE

      22. Accessing your own hardware (hw acceleration) is a bit of a moot point (around 26min mark). Every application uses your hardware in some way, so whenever you pay for an application, you’re in a way paying to access your hardware (in some custom, specific way). In case of plex and hw accelleration, you’re not really paying to access your hardware (it’s not like they’re actively blocking that on free tier) but for (as you have said) dev time to integrate that hardware capability into plex. It is strong leverage to get people to get the license though. Great and informative video, thnx!
        REPLY ON YOUTUBE

      23. As soon as I bought my NAS I adopted Plex but quickly abandoned it. It couldn’t find my non-English content well and it rarely recognized my subtitle files. In addition to the constant connection problems. I migrated to Emby, which was lighter, found the correct data and recognized my subtitles. But it still presented a problem: some clients were horrible. The Android TV client, in addition to being paid for, did not work properly and the plugin for Kodi was deficient. I recently decided to try Jellyfin and, so far, more joy than sadness. There are still some problems. Notifications, which worked perfectly well on Emby, require a little more effort to work properly. Overall I’m happier using it than I was using the others.
        REPLY ON YOUTUBE

      24. I have a Qnap nas mainly for backup and media streaming with Plex.
        I have a lot of dvd’s that i want to backup to my Qnap.
        The problem is that converting them from a dvd to mp4 takes a lot of time.
        Is there a way to play a copy of the VIDEO_TS folder of a dvd on my Qnap nas?
        Can i copy the VIDEO_TS folder to my Qnap nas and convert it on my nas to mp4, just like “Transcoding” in “Multimedia Console”?
        This way i don’t have to use my computer for transcoding and let my nas do the work.

        Thank you
        REPLY ON YOUTUBE

      25. Great video! In my opinion, to each their own. Each of these platforms are targeted to different user group. You have the group that love to ticker and put in the extra work and do customization and smile when things work. Then you have the group the just wants to install something, do a simple user friendly setup and things just work regardless of the fee. I am a Plex user for the past 6 years. I use my 8-bay Synology as the file server and I have a PC with a P2000 Quadro for transcoding. Most of the users a share library with are of the older age group that’s not tech savvy. So sending and invite and just walking through the setup on the phone is simple. When I go on vacation, I can just connect to Plex on a smart tv and just start watching, I can log out when am done. I am not bashing Jellyfin or Emby, they are good, but it’s not suitable for me.
        REPLY ON YOUTUBE

      26. Thank you for your truly excellent video. For me, not being 100% free is a dealbreaker, so I would go with Jellyfin over Plex in a heartbeat. I am actually using Synology Video Station right now, and I am quite happy with it, as I really don’t feel the need any additional bells and whistles. Perhaps I will consider switching to Jellyfin at some future time.
        REPLY ON YOUTUBE

      27. Plex have been very good for some years, but lately they move further and further away from a “home” Media server to a Streaming service, and hiding to many things behind their Plex Pass. (I have been using Plex for many years, but would not recommend Plex as a frist choice. Mainly for the insane slow to implement “new” standards (codex, file formats, Tags etc)and also unwillingness to listen to their users.
        REPLY ON YOUTUBE

      28. Great summary. I think one thing missing for me in the comparison blog though is the audio player. I’m trying to move from Plex to Jellyfin, but I’m stuck on there not being a viable equivalent of PlexAmp. This is important to me because I mainly listen to music in the car, so there needs to be a client that works with Android Auto. PlexAmp is pretty slick, and gives you your own private Spotify type experience. Also, are you able to do a guide of adding Live TV (TV tuner cards) support to a Synology NAS Jellyfin server sometime? And maybe how to tell if your NAS is capable of hardware transcoding. Thanks!
        REPLY ON YOUTUBE

      29. As far as I know, neither of these are fully supported in DSM 7.1.1 – Plex is a Beta and Jellyfin is a community app, that comes with a bunch of warnings/waivers.
        I’m a bit risk averse and will wait for DSM 7.2 and see what is supported before I potentially risk all my data just to stream a DVD that I can put in a machine.
        REPLY ON YOUTUBE

      30. I use Emby running in Docker on a DS920+. I was wondering if there’s anyway to make use of the 2 lans and have Emby only running on lan 2, whilst everything else runs on lan 1? Can this be done? Video idea maybe??
        REPLY ON YOUTUBE

      31. I used plex for the better part of a year without complaint. My experience with it was finally soured when I got a nice OLED 4k tv, and I played a 4k movie via plex. I tried to turn on subtitles, and plex said I needed to pay to enable hardware transcoding if I wanted subs. Imagine you have a service running on your own hardware – you’re paying for the silicon and the power – but you need to pay someone to unlock a feature that you yourself are going to serve on your own server. That’s like ordering a pizza, but then it shows up and you have to put it together and cook it yourself. I’ll do that, I’ll cook it myself, but I don’t want to pay someone for the right.
        I also ran into a situation where I had no internet, but plex required an internet connection before I could start the server. I switched to Jellyfin later that week. If you like plex, and you paid for it, and you’re happy with it, then there’s no reason to leave. However if you value running a service that’s actually yours (one of the main reasons many of us got into home networking) with no asterisks, then its Jellyfin; every day.
        REPLY ON YOUTUBE

      32. i use plex now but have issues with the scrobbler as it will skip ffw 10min only. no back. which makes not spoiling movies suck if you want to pause. it also goes fwd 10 even if you hit back. Don’t know if it’s my remote but it’s annoying. i now have plex and like the visuals but usually actually watch longer movies i might have to pause on the shield tv vlc app. Tried emby for music it was great till it broke. It’s a major pain to configure the music libraries and it doesn’t read mp3 metadata remotely correctly and since that’s how it organizes it screws up albums splitting them. Also when you navigate on the phone app by genre it goes genre, then songs, then gives a massive list of songs. Nobody with a music collection visualizes music like that. It should go genre, artist, album, song. And there’s no option to force navigating like that and despite requests i’ve read they won’t do it. Apples native app switched to doing that which is why i used a 3rd party one. But it’s a major pain to pick like hip-hop as a genre and then just get a list 18k songs. Hell i don’t even know the names of plenty of songs. I just know when i bought the album what album it’s on. But it is useful if you have tons of music as basically a free spotify. Especially if you’re like me and have lots of out of print or local music spotify doesn’t have.

        I do like that once you figure out plex it pretty much just works. Wish i could just use vlc as the default video player cause vlc is rock solid and rarely fails me in terms of competent playback. I researched Jellyfin but won’t get to try it until i buy a NAS.
        REPLY ON YOUTUBE

      33. I see from one comment that Plex has a relay server. ( I’m pretty new to Plex.) But, I don’t want to open port or activate UPnP on my router. Can you Tailscale directly into your home Plex server ?
        REPLY ON YOUTUBE

      34. I like the look of Jellyfin but that is a hard pass when it comes to the need to install docker to run it.
        Like VMware…Docker is a waste of time and effort if all you plan on doing is running the one thing… Both Docker and VMware are only worthwhile for a very small number of use cases.
        It is like Buying a flatbed truck and then hauling around your sports car with it.
        REPLY ON YOUTUBE

      35. Having gone from plex premium -> emby premium -> jellyfin, if possible you really should run a 3 side by side to get an idea of what each is like day to day. Once you have one setup it’s not difficult to tack them onto each other. They all have “gotchas”

        I’ve long abandoned plex, I don’t think I’ve use it in a few years.

        I’ve found surprisingly the Roku app for jellyfin has FINALLY solved the h265 (my Rokus are old and need hw transcoding) bug that has was in all of them, it made playback unusable, really. The Roku and android TV apps both have been flawless lately.

        I’m hopeful for jellyfin for the first time in awhile, the development seems to be back on track. The Roku app is still getting consistent new features added, they are also implementing new features like playlists and other stupid things that emby has ignored. I do wish jellyfin had a backup app, EmbyBackup was one of my favorite features, I’m surprised there isn’t even a plugin (that I’ve been able to find anyways).

        Once I figured out there was an intro skip plugin available I’ve been on jellyfin exclusively.

        My library is ~40tb
        REPLY ON YOUTUBE

      36. Plex has the Trump card in all comparisons. They are the only 1 with a relay server option. I’d pay for something like jellyfin to supply a relay service for remote playback outside the home.
        That’s the main reason I still use plex over the alternatives.
        REPLY ON YOUTUBE

      37. I’ve used plex for years, went to Emby and then Jellyfin, now back on plex, it just works.
        Jellyfin is my second favorite but apps are garbage.
        I wish Plex had more customization like Jellyfin though. We need need a Plexifin lol
        REPLY ON YOUTUBE

      38. To me plex is still ahead of jellyfin, simply because it has the share screen feature, while on jellyfin, despite having the icon, it just doesn’t work. Besides, plex has the subtitle seeker built in, while the other is done though an extension. The movies and tv show covers are also very accurate, and if you don’t find it, it’s fairly simple to seach for it. On Jellyfin you have to go to imdb to search for the right cover, and that’s kind of a handful.
        REPLY ON YOUTUBE