DS1821+ RAM upgrade

DS1821+ RAM upgrade

 

Add a Memory Module to Synology NAS Optional Synology memory modules are designed to expand the memory of your Synology NAS. Follow the steps below to install, check, or remove a memory module on your Synology NAS. The following table shows the memory configuration for best practice:

Follow the steps below to install, check, or remove a memory module on your DS1821+. To install the memory module

1 Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage.

2 The memory modules are located at the bottom of your Synology NAS.

3 Remove the two screws on the cover that protecting the modules. Lift up the cover and put it aside. You will see one pre-installed 4 GB memory module.

4 Insert the new memory module into the empty slot:

a Align the small gap between the gold connectors of the memory module with the notch on the empty slot. Insert the memory module into the slot. Make sure that the module is properly inserted.

b Gently push down the memory module until you hear a click.

5 Replace the cover and tighten the two screws that removed.

6 Reconnect the cables that removed, then press the power button to turn on your Synology NAS.

To make sure your Synology NAS recognizes the new memory capacity
1 Install DiskStation Manager (DSM). Please see “Install DSM on Synology NAS” for more information.
2 Sign in to DSM as admin or a user belonging to the administrators group.
3 Go to Control Panel > Info Center and check Total Physical Memory.
If your Synology NAS does not recognize the memory or does not start up successfully, please make sure that
the memory module is installed correctly.
To remove the memory module
1 Follow step 1 to 3 of the “To install the memory module” section to shut down your Synology NAS,
disconnect the cables and remove the cover.
2 Push the levers on both sides of the memory module outward. The memory module will be released from its
slot.

 

3 Hold the memory module by its edges and remove it from the slot.
4 Replace the cover and tighten the two screws that removed.
5 Reconnect the cables that removed, then press the power button to turn on your Synology NAS.

 

 

 

COMPATIBLE RAM

 

D4ES01-4GĀ  Ā UKĀ  USA

DDR4 ECC Unbuffered SODIMM
EAN: 4711174724031

 

D4ES01-8GĀ UKĀ  USA

DDR4 ECC Unbuffered SODIMM
EAN: 4711174724055

 

D4ECSO-2666-16GĀ UKĀ  USA

DDR4 ECC Unbuffered SODIMM
EAN: 4711174723676

 

ds1621+and ds1821+ RAM upgrade using Arch Memory

 

 

 

 

 

 

 

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!