Migrate Qnap RAID1 to RAID10

Migrating from RAID 1 to RAID 10 – Reinstall and Restore?

I was wondering whether you have instructions for migrating from RAID 1 to RAID 10 for QNAP NAS. QNAP says only RAID 0 -> 1 -> 5 -> 6 is supported online. RAID 10 requires a complete reinitialisation and recreation followed by a restore.

However, I cannot find anything online (and through QNAP Support) that shows how to restore all [QNAP] Applications including their configuration, without having to manually reinstall and reconfigure all non-default Apps after reinitialisation. Doing this manually will be a huge undertaking!

QTS version 4.4.2.

I would be grateful for your advice.

No, RAID10 is something you can start with. But you can no migrate to other RAID options unfortunately.


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!