Synology NAS Firewall rule order

Synology NAS Firewall rule order. I need to know in what order firewall rules should go? Is it like most firewall rules that go from top to bottom?

The order goes from bottom to top.

 

Here is how Only allow specific IP addresses to access DSM

  1. Go to Control Panel > Security > Firewall to enable the firewall and create firewall rules using the steps in this article.
  2. Create two firewall rules if you want to only allow specific IP addresses to access your DSM (e.g., 192.168.50.xxx and 192.168.50.xxx) and deny other IP addresses from accessing it.

 

 


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!