M.2 2280 PCIe NVMe SSD adapters with 10GbE released

M.2 2280 PCIe NVMe SSD adapters with 10GbE released

Main specifications

model instruction PCIe and transmission interface
QM2-2P410G2T Dual-port M.2 2280 PCIe NVMe SSD with dual-port 10GbE expansion card PCIe Gen4 x8
QM2-2P410G1T Dual-port M.2 2280 PCIe NVMe SSD with single-port 10GbE expansion card PCIe Gen4 x8
QM2-2P10G1TB Dual-port M.2 2280 PCIe NVMe SSD with single-port 10GbE expansion card PCIe Gen3 x8

Controller Marvell AQC113C
Transmission port 2 x M.2 2280 PCIe (Gen4 x4) NVMe SSD s slot
PCIe and transmission interface PCIe Gen4 x8
Baffle Pre-installed half-height baffle and comes with specific half-height and full-height baffles
Dimensions (height x width x depth) 187 × 68.9 × 19.35 mm
Appearance specifications Half height
Wire RJ-45; CAT-6 or better wire
Remarks [PC] Note:
Windows devices: The driver for QM2-2P410G2T is required.
Click here to download the driver
Architecture diagram

QM2-2P410G1T
Controller Marvell AQC113C
Transmission port 2 x M.2 2280 PCIe (Gen4 x4) NVMe SSD s slot
PCIe and transmission interface PCIe Gen4 x8
Baffle Pre-installed half-height baffle and comes with specific half-height and full-height baffles
Dimensions (height x width x depth) 187 × 68.9 × 19.35 mm
Appearance specifications Half height
Wire RJ-45; CAT-6 or better wire
Remarks [PC] Note:
Windows devices: The driver for QM2-2P410G1T is required.
Click here to download the driver
Architecture diagram

QM2-2P10G1TB
Controller Marvell AQC113C
Transmission port 2 x M.2 2280 PCIe (Gen3 x4) NVMe SSD slot
PCIe and transmission interface PCIe Gen3 x8
Baffle Pre-installed half-height baffle and comes with specific half-height and full-height baffles
Dimensions (height x width x depth) 152.65 × 68.9 × 18.9 mm
Appearance specifications Half height
Wire RJ-45; CAT-6 or better wire
Remarks [NAS] Recommended model (please update your NAS to the latest version)

Note: TS-x77 and TVS-x82(T) series only support QM2 to be installed in the PCIe slot (PCIe slot 1) of the system area.

Remarks [PC] Note:
Windows devices: The driver for QM2-2P10G1TB is required.
Click here to download the driver
Architecture diagram



If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!

2 thoughts on “M.2 2280 PCIe NVMe SSD adapters with 10GbE released

  1. QNAP QM2-2P10G1TB in QNAP TS-464

    I wanted to boost performance on my QNAP TS-464 NAS so invested in a QNAP QM2-2P10G1TB expansion card and added 2x 4 TB WD Red SN700 NVMe SSD’s.
    The idea behind adding the QNAP QM2-2P10G1TB expansion card was to obtain a 10 GbE connection and then using it’s 2 NVMe slots to create a fast 2 x 4TB SSD RAID-1 disk array.

    I also have 2 x 1 TB SSD’s mounted on the TS-464 itself as cache to a 2 x 18TB RAID-1 HDD disk array. So this cache is only used towards the HDD’s.

    Problem is that write speed to the 2x4TB SSD’s on the expansion card is surprisingly slow. The usable card interface to the TS-464 should be PCIe 3.0 x2, leaving enough bandwidth to support full 10GbE speed and a 1250 MB/s write speed to the SSD’s. But I’m not seeing these speeds at all. Copying a 8 GB file to a folder I’m able to reach 180MB/s to 220 MB/s ,

    What am I doing wrong or what have I misunderstood?

    1. The write speed you’re experiencing on your QNAP TS-464 NAS with the QNAP QM2-2P10G1TB expansion card and 2x 4TB WD Red SN700 NVMe SSDs might be lower than expected due to a number of factors, including:

      RAID Configuration: The performance of a RAID array is affected by the type of RAID configuration you use. RAID-1, for example, requires twice the write operations as a single disk, reducing write performance.

      Network Latency: If you’re accessing the NAS over a network, network latency can also impact performance. Network congestion, distance between devices, and the quality of the network infrastructure can all affect the overall performance of your NAS.

      Data Transfer Size: The size of the data you’re transferring can also impact performance. Larger data transfers tend to be faster, while smaller transfers tend to be slower.

      Other Load on the NAS: Other activities on the NAS can affect performance. If the NAS is running other tasks, such as serving up files to multiple clients or running backups, these tasks can reduce the overall performance of the NAS.

      It’s possible that some of these factors are contributing to the slow write speeds you’re experiencing. You might consider trying to improve performance by tuning the network settings, optimizing the RAID configuration, and monitoring the NAS to identify any other potential bottlenecks. You can also consult the QNAP support resources for additional guidance and advice.