New TS-h2477XU-RP Qnap ZFS AMD Ryzen based NAS with built-in 10GbE

New TS-h2477XU-RP Qnap ZFS AMD Ryzen based NAS with built-in 10GbE

TS-h2477XU-RP-3700X-32G

CPU AMD Ryzen™ 7 3700X 8-core/16-thread 3.6 GHz processor, Turbo Core 4.4 GHz
CPU architecture 64-bit x86
Floating point arithmetic
Encryption engine  (AES-NI)
System memory 32 GB UDIMM DDR4 (2 x 16 GB)
Maximum memory 128 GB (4 x 32 GB)
Memory slot 4 x Long-DIMM DDR4
Flash memory 5 GB (Dual boot OS protection)
Number of hard drive slots 24 3.5-inch SATA 6Gb/s, 3Gb/s
Support hard disk type 3.5-inch SATA hard drive
2.5-inch SATA hard drive
2.5-inch SATA solid state drive
Hot plug support
SSD cache acceleration support
Gigabit Ethernet port (RJ45) 2
10 Gigabit Ethernet port 2 x 10GbE SFP+ SmartNIC ports, 2 x 10GBase-T ports
Wake on LAN (WOL)
Jumbo Frame Packet
PCIe expansion slot 4
Slot 1: PCIe Gen 3 x4
Slot 2: PCIe Gen 3 x8 or PCIe Gen 3 x4*
Slot 3: PCIe Gen 3 x8 or PCIe Gen 3 x4**
Slot 4: PCIe Gen 3 x4
*Slot 2 provides PCIe Gen3 x8 bandwidth when slot 1 is not in use, and PCIe Gen3 x4 bandwidth when slot 1 is in use.
**Slot 3 provides PCIe Gen3 x8 bandwidth when slot 4 is not in use, and PCIe Gen3 x4 bandwidth when slot 4 is in use.
***PCIe slot 4 pre-loaded with 10GbE network expansion card
USB 3.2 Gen 1 port 4
USB 3.2 Gen 2 (10Gbps) port 1 Type-C USB 3.2 Gen 2 10Gbps
1 Type-A USB 3.2 Gen 2 10Gbps
Form factor 4U rack mount
LED indicator HDD 1-24, status, network, storage expansion port status
Button Power supply, system reset
Dimensions (height x width x depth) 176.15 × 481.04 × 672.02 mm
Weight (net weight) 22.66 kg
Operating temperature 0-40 °C (32°F-104°F)
Storage temperature -20-70°C (-4°F-158°F)
Relative humidity 5-95% RH (non-condensing), wet bulb: 27˚C (80.6˚F)
Power Supplier 800W (x2), 100-240V
Power consumption: operating mode, typical value 143.97 W
Pass the hard drive full load test.
fan System fan: 4 (92mm), 12VDC
Noise value 27.5 db(A)
System alert buzzer
Max. Number of Concurrent Connections (CIFS)-with Max. Memory 5000
Note: Please only use QNAP memory modules to maintain system performance and stability. If the NAS device has multiple memory modules, please use QNAP modules of the same specification.
Warning: Using unsupported modules may reduce performance, cause errors, or prevent the operating system from starting.
* Noise level test environment:
reference standard: ISO 7779; maximum number of hard disks loaded according to the number of bays; measured by Bystander Position; average data of one meter in front of the machine during operation. The
product image is for illustration only, the actual product may vary. Due to screen display error, the actual color of the product may be different from that shown on the website.
QNAP Technology reserves the right to make changes at any time without notice.


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!