TS-133 Qnap single bay NAS for home

 

QNAP TS-133 1-Bay NAS Drive Revealed, Coming Soon!

If you are someone who has been looking at buying their first NAS drive, but targeting something a little more ‘affordable’ or ‘value’ in scope, then it’s been a bit of a tough choice lately. There ARE most cost-effective solutions available right now from the big name brands, but many are coming up on 2 years since release and this can easily lead buyers to wonder ‘is something better about to arrive?’ New releases in the world of network-attached storage (NAS) were a little thin in the closing stages of 2021 compared with previous years. Whether it is the manufacturers switching focus from the hardware to the software, relying more and more on existing models to support their NAS operating system and GUI, or because 2020/2021 had been rather complicated years to track consumer trends and existing units in the field because the pandemic has massively effected consumer priorities. Whatever the reason, news on new releases from the big NAS brands have started to arrive a lot later than we expected and with many users sitting on their money, waiting for something new and shiny to buy, it is only now at the start of 2022 that we are seeing some new kit start to emerge. Step forward to a new affordable 1-Bay NAS solution from QNAP, the TS-133 NAS Drive. Featuring a modified take on an existing chassis, the arrival of a new efficient yet capable CPU (that I expect we will see cropping up a lot more as the year goes on) and a few hardware factors that are very ‘QNAP’ in design, the newly announced TS-133 sounds like it will be the perfect budget NAS for those making their first steps into a home or small business server.

 

 

TS-133

CPU ARM 4-core Cortex-A55 1.8GHz processor
CPU Architecture 64-bit ARM
Floating Point Unit
Encryption Engine
System Memory 2 GB, not expandable
Note: Reserves some RAM for use as shared graphics memory.
Maximum Memory 2 GB, not expandable
Flash Memory 4 GB (Dual boot OS protection)
Drive Bay 1 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Gigabit Ethernet Port (RJ45) 1
5 Gigabit Ethernet Port (5G/2.5G/1G/100M) Optional via the QNA-UC5G1T USB to 5GbE network adapter
Wake on LAN (WOL)
Jumbo Frame
USB 2.0 port 1
USB 3.2 Gen 1 port 1
Form Factor Tower
LED Indicators System Status, LAN, HDD
Buttons Power, Reset
Dimensions (HxWxD) 187.5 × 66.1 × 157.6 mm
Weight (Net) 0.61 kg
Weight (Gross) 1.27 kg
Operating temperature 0 – 40 °C (32°F – 104°F)
Storage Temperature -20 – 70°C (-4°F – 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 36W Adapter, 100-240V
Power Consumption: HDD Sleep Mode 2.74 W
Power Consumption: Operating Mode, Typical 7.32 W
Tested with drives fully populated.
Fan 1 x 50mm, 12VDC
System Warning Buzzer
Max. Number of Concurrent Connections (CIFS) – with Max. Memory 200


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!