QNAP TVS-h1288X NAS Plex 10bit 4K, 1080p and 720p Tests (H.264 & HEVC)

Transcoding 4K Media on the TVS-h1288X NAS Plex Media Server

Smooth playback of high-end media on a NAS is always something that you cannot really cheap-out on. if you are investing in a new NAS system and are looking for a solution that will last for a good few years alongside your TV/Sound system, then you need to choose wisely. This also applies to choosing a QNAP NAS that will have the horsepower to convert your big, BIG files into something more suitable with your mobile devices, tablets and more – known as transcoding. Transcoding on a NAS such as the TVS-h1288X device is the ability for a multimedia file to be changed from it’s existing format or codec to one that is better suited to the destination device. In this file access, the TVS-h1288X NAS is the host device and the device you want to play the file is the client. This is the case of whether you are using Plex or not. Transcoding is typically required when a media file is more recently released than the client device that is accessing it, so the newer compression or playback format is unknown to the device you want to access it with. Alternatively, you want to access the movie or music on your TVS-h1288X and do not want to use the original file in its full size. Transcoding can enable you to stream a much smaller version in weight or resolution if needed. In a popular program such as PLEX, smooth playback is essential, and with the plex media server application on the TVS-h1288X NAS using a larger percentage of CPU and Memory than most programs, it is very useful to know the plex transcoding abilities of any NAS.

Why should you factor transcoding with a Plex Media Server on a TVS-h1288X NAS

When you install a Plex Media Server on your TVS-h1288X, you should know that plex is not the answer to all of your media players. It has some limitations and depending on the NAS you use, these limits can be annoying. You will most likely have media files in a large collection of different formats and there is no guaranteeing that these are going to be compatible with TVs, iPads and Smartphones that you wish to watch them on. Although you will have a version of the Plex app on the viewing device, that app will still be locked to playback the supported media types on that device.

So if your phone does not support .MKV or .MOV, then neither does the plex app you installed on it. However, this is where transcoding comes in again, as the plex media server will use the NAS system resources to change the file to a version/format that it CAN play. What makes transcoding with Plex different to ordinary transcoding is that often, the NAS (in this case, the TVS-h1288X) will not let the plex use the transcoding engine inside. This is not the end of the world, as it will use raw system power instead. The result is that where a regular transcode outside of plex will use 20-30%, in plex it could go as high as 70-80%. This is why it is important to know how well a plex NAS will transcode, as if it will happen regularly, it could potentially slow down the general use of your TVS-h1288X NAS. In the case of Xeon based NAS devices (such as the QNAP TVS-h1288X), these processors do not feature embedded graphics components (AKA a transcoding engine) and therefore they will require the system to use raw CPU power to get the job done. This is less efficient than a GPU-assisted processor like an Intel Core or AMD Radeon, but it makes up for it with just having more power.

Which Plex supported client devices require transcoding from the TVS-h1288X NAS

Destination devices range greatly and are often referred to as the client device. Common client devices that your TVS-h1288X device will be accessed by are often:

  • iPad or Android Tablet
  • iPhone or Android Smartphone
  • Smart TV or DLNA supported monitor
  • MacBook, Laptop or Netbook device
  • Sound systems such as Bose, Sonos and Sony DLNA systems
  • Home Theatre Systems
  • Network and internet-enabled gaming consoles such as PS4, Xbox One and Nvidia Shield

Transcoding between a TVS-h1288X and your media can be of tremendous benefit for those with limited internet bandwidth, download limits or low powered devices whilst using the plex client application.

What are the Specifications of the TVS-h1288X NAS?

The specifications for the TVS-h1288X NAS are below and like all NAS devices, the CPU and Memory play a big part in how well it performs at transcoding both in and out of plex. The key factors to consider are if the device features an x86 or ARM-based CPU, does the TVS-h1288X CPU feature a transcoding engine (sadly not) and how much RAM the device arrives with for multiple transcoding tasks (8GB by default, going up to 32GB). Below are the TVS-h1288X specs:

The QNAP TVS-h1288X 4-Bay NAS – £1900+

SPECS –  CPU TRANSCODING ENGINE: YES 1080P Support: YES 4K Support: YES Transcoding Support: YES, HARDWARE

CPU Model Intel Xeon W-1250  -Six Core
CPU Architecture 64-bit x86 – Embedded P630 Graphics
CPU Frequency 3.3 – 4.7GHz per Core
Memory Options 16-128GB DDR4 ECC2466Mhz (16GB in Base Model)

If you are thinking of buying a QNAP NAS, please use the links below

What is the difference between H.264 and H.265 4K Media on a NAS

H.264 and H.265 are common codecs of modern digital media. H264 is also referred to as AVC by experts (Advanced Video Coding) and is considered the standard for video file compression. This allows for media originally created for large-scale entertainment to be recording, compressed, and distributed to the home and smaller-scale production of digital video content watched by you, the consumer via Plex. H265 is the newer and more consumer-friendly alternative to H264. It is also known as HEVC (High-Efficiency Video Coding) and was developed in order to resolve issues of enormous 4K media files being just too large for your client device to playback. H.265 has become so popular and data saving that chances are that the YouTube clip, iTunes media or iPlayer content you watched was in .265 and HEVC. One issue of H.265, however, does have it’s own drawbacks, with many NAS devices being unable to playback the media by default for licencing reasons, CPU incompatibility or the graphics driver that Plex uses in the system not being suitable. Typically a modern NAS such as the TVS-h1288X will playback with JUST H.265 or H.254, or it will Playback both H.264 and H.265. The latter pretty much being exclusive to x86 or AMD based NAS CPU devices.

The TVS-h1288X NAS Plex Tests – Idle/Standby

To get a better idea of what is considered ‘normal running’ in plex, we installed plex media server, along with a handful of video files that covered SD, 720p, 1080p and 4K, each at either H.264, H.265 (HEVC), UHD, 10bit or a combination of some/all of them. Here is how the NAS looked when in standby/idle (I have circled the important things to look at:

QNAP TVS-h1288X NAS PLEX TEST – 720P 3Mpbs H264

QNAP TVS-h1288X NAS PLEX TEST – 720P 3Mpbs H264 CONVERT to 1.5Mbps 480p

QNAP TVS-h1288X NAS PLEX TEST – 720P 3Mpbs H264 CONVERT to 0.3Mbps 240p

QNAP TVS-h1288X NAS PLEX TEST – 720P 3Mpbs H264 CONVERT to 0.2Mbps 160p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 1.5Mpbs H264

QNAP TVS-h1288X NAS PLEX TEST – 1080P 1.5Mpbs H264 CONVERT to 1.5Mbps 480p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 1.5Mpbs H264 CONVERT to 0.2Mbps 160p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 3Mpbs H264

QNAP TVS-h1288X NAS PLEX TEST – 1080P 3Mpbs H264 CONVERT to 0.2Mbps 160p

QNAP TVS-h1288X NAS PLEX TEST –

 

QNAP TVS-h1288X NAS PLEX TEST – 1080P 3Mpbs H265 CONVERT to 4Mbps 720p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 3Mpbs H265 10bit

QNAP TVS-h1288X NAS PLEX TEST – 1080P 3Mpbs H265 10bit CONVERT to 1.5Mbps 480p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 100Mpbs H264

QNAP TVS-h1288X NAS PLEX TEST – 1080P 10Mpbs H265 10bit

QNAP TVS-h1288X NAS PLEX TEST – 1080P 10Mpbs H265 10bit CONVERT to 2Mbps 720p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 30Mpbs H265

QNAP TVS-h1288X NAS PLEX TEST – 1080P 30Mpbs H265 CONVERT 0.3Mbps 240p

QNAP TVS-h1288X NAS PLEX TEST – 1080P 100Mpbs H265

QNAP TVS-h1288X NAS PLEX TEST – 1080P 100Mpbs H265 CONVERT 1.5Mbps 480p

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 120Mpbs H265 10bit

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 120Mpbs H265 10bit CONVERT 0.2Mbps 160p

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 200Mpbs H265 10bit

 

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 200Mpbs H265 10bit CONVERT 0.3Mbps 240p

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 400Mpbs H265 10bit

 

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 400Mpbs H265 10bit CONVERT 10Mbps 1080P

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 400Mpbs H265 10bit CONVERT 2Mbps 720P

QNAP TVS-h1288X NAS PLEX TEST – 4K UHD 400Mpbs H265 10bit CONVERT 0.2Mbps 160P

QNAP TVS-h1288X NAS PLEX TEST – TWO 400Mbps 4K UHD HEVC 10BIT MKV

 

I hope these Plex Media Server 4K results were of use to you and this helps you consider which NAS you wish to you buy in 2020, whether it is the TVS-h1288X or something more or less suited to your needs.

 

Read the QNAP TVS-h1288X NAS Drive Review Below (click)

If you are thinking of buying a QNAP NAS, please use the links below

 


DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

20 thoughts on “QNAP TVS-h1288X NAS Plex 10bit 4K, 1080p and 720p Tests (H.264 & HEVC)

  1. Question?

    So if I rip 4K uhd blu rays to a synology nas and play it using a pc,Apple TV 4K and phone. Do I have to worry about transcoding? And will i worry about transcoding if I were to rip older disneys dvd tbat are 720p or 1080p
    REPLY ON YOUTUBE

  2. Hello, sir. You seem to be very up on the game here. Can you please reply to this: what’s the thickest 2.5″ drive the bay will hold on this device? Thank you.
    REPLY ON YOUTUBE

  3. Hello, I have a TVS-1282T3 with bay 1 that is failing. Whatever drive i put in Bay 1, when I reboot, goes missing, until i pull the drive and put it back in, at which point it gets detected again and rebuild, UNTIL I reboot the system and bay 1 goes missing again. I thought this was the hard drive but I’ve replaced the drive several times and it does appear to be the bay drive.

    My TVS-1282T3 is out of warranty for hardware

    Since the TVS-H1288X is a 2020 model, is this still the upgrade to the TVS-1282T3 STILL the upgrade or is there another one I should be looking for?

    I am using my QNAP for PLEX

    Thank you
    REPLY ON YOUTUBE

  4. I heard so many issues with qnap I considering the qnap but I’M hearing so many bad things disconnected alot hardware and software issuess I dont know which direction synology with there locked hardrives? so I’m not what diection to go with
    REPLY ON YOUTUBE

  5. If you look at Qnap’s switch offerings, they seem to favor SFP over 10baseT connections for 10Gbe. Why then is this NAS equipped with 10BaseT copper 10Gbe and not SFP? Why not at least offer the option since the 10Gbe is obviously an add-in card?
    REPLY ON YOUTUBE

Comments are closed.