UniFi UNAS 2 Review

The UniFi UNAS 2 NAS Review – Value vs Scale

Note, the UNAS Pro 2 is NOW LIVE on the UniFi Store . The UNAS 4, UNAS Pro 4 and UNAS Pro 8 are now in the site, but are not available till October / Q4 2025

The UniFi UNAS 2 is a compact, entry-level two-bay desktop NAS introduced as part of Ubiquiti’s second phase of NAS development, following the debut of the UNAS Pro in 2024. That earlier seven-bay rackmount system was notable for its low $499 price and integrated 10GbE connectivity, but it had an unconventional design, limited fan control, and no support for USB expansion. By contrast, the UNAS 2 shifts away from rackmount hardware and into the desktop market, adopting a much smaller form factor and prioritising simplicity over raw performance. Measuring 13.5 x 12.9 x 22.37 cm and weighing only 1.3 kg, it is one of the smallest systems in the UniFi NAS range and is constructed from polycarbonate rather than steel, reinforcing its role as an affordable, lightweight device.

The hardware is designed primarily for modest storage requirements, supporting two 3.5-inch hard drives with a maximum combined power budget of 52W and an overall consumption ceiling of 60W. The device operates on a single 2.5 GbE RJ45 interface, which also functions as a PoE++ input, removing the need for a conventional power supply unit but requiring either a compatible PoE++ switch or the included 60W injector. This approach marks a clear departure from the UNAS Pro, which included a standard power connector and optional redundancy through additional PSU modules. In practice, the reliance on a single port for both power and data streamlines installation within UniFi networks, but it also introduces a single point of failure and reduces flexibility compared with larger systems.

UniFi UNAS 2 Review – Quick Conclusion

The UniFi UNAS 2 is a compact, entry-level NAS that prioritises simplicity and integration within the UniFi ecosystem over flexibility or raw performance. Its use of PoE++ for both power and connectivity makes installation straightforward in environments with compatible UniFi switches, but it introduces reliance on a single port and limits deployment outside that infrastructure, even with the included injector in the retail kit. The system supports two 3.5-inch drives in a shared non–hot-swappable tray, with RAID 0, RAID 1, or single-disk setups available, but there is no option for expansion or NVMe caching. Hardware consists of a quad-core ARM Cortex-A55 processor with fixed 4 GB of LPDDR4 memory, which is efficient but imposes clear limits on throughput and application scope. Performance testing produced read speeds up to 260 MB/s and writes in the 160–180 MB/s range, sufficient for the 2.5 GbE interface but reflective of the modest hardware and thermal constraints, with CPU temperatures often approaching 80°C under load. Software provides a clean interface with snapshots, RAID tools, backups to other UniFi NAS or cloud services, and user management tied to UniFi identity, but features such as iSCSI, encryption, and granular backup rules are absent. As a result, the UNAS 2 is best suited as a secondary or edge storage device, particularly for UniFi users seeking easy integration, but it lacks the scalability and depth of established NAS platforms needed for primary or enterprise deployments.

BUILD QUALITY - 9/10

HARDWARE - 7/10

PERFORMANCE - 7/10

PRICE - 10/10

VALUE - 9/10

8.4

PROS

👍🏻Benefits from almost a year of development of the UNAS Pro by UniFi, resulting in a much more complete solution in both hardware and software
👍🏻Exceptionally appealing price point
👍🏻Extremely low impact (power use, noise level, physical scale all great)
👍🏻Introduction of USB C 5Gb/s Connectivity is very welcome
👍🏻Supports complete network/local access if preferred, as well as full remote connectivity with the UI.com account and site manager services
👍🏻Wide Hard Drives and SATA SSD Support (UniFi branded drives and those from 3rd parties such as Seagate Ironwolf, WD Red and Toshiba N300)
👍🏻Comprehensive network storage software in UniFi NAS OS and Drive.
👍🏻Latest OS updates have included fan control, flexible RAID configurations, encrypted drive creation, customizable snapshots, more backup client choices/targets
👍🏻\'Single Pane of Glass\' management and monitoring screen is very well presented!
👍🏻One of the fastest to deploy turnkey NAS solutions I have ever personally used!

CONS

👎🏻Single network port, though not a dealbreaker (as this is still just 2x SATA throughput), is not great in terms of a network failover or in deployment of SATA SSDs
👎🏻Choice of PoE deployment unusual and limits some deployments
👎🏻USB C connectivity does not support network adapters, NAS expansions or 3rd party UPS devices
👎🏻Very modest base hardware, but understandable relative to the price
👎🏻HDD injection is very unique, but it prevents hot swapping
👎🏻Still a lack of client applications native to the NAS services for Windows, Mac, Android and Linux

You can buy the UniFi UNAS 2 NAS via the link below – doing so will result in a small commission coming to me and Eddie at NASCompares, and allows us to keep doing what we do! 

UniFi UNAS 2 Review – Design

The UNAS 2 adopts a small desktop form factor, measuring 135 x 129 x 223.7 mm and weighing 1.3 kg. Its enclosure is constructed from polycarbonate, which makes it lighter and less industrial than the steel-based rackmount models in UniFi’s NAS range. The compact build is suited for environments where space is limited, and it operates within an ambient temperature range of -5 to 40°C and a humidity tolerance of 10–90% non-condensing. With only two drive bays, the UNAS 2 positions itself as an edge device for simple storage and backup, rather than a primary data management system.

Drive installation is handled through a single removable cage that holds both 3.5-inch drives. Each drive clips into place using a shared tray design, with both units inserted in opposite orientations to align with the SATA connectors. While this arrangement is functional, it has some limitations.

There is no support for hot swapping, meaning the system must be powered down before drives can be replaced. Additionally, the shared cage design requires both drives to be handled together, which increases the risk of disturbing a healthy drive when removing or replacing a failed one.

Cooling is managed by a small fan located at the rear, supported by passive ventilation channels at the base of the unit. Air is drawn in from underneath and expelled from the top section, ensuring airflow across the drives and the system board. Thermal tests recorded CPU temperatures in the range of 75–80°C during higher utilisation, with the chassis surface reaching around 39–50°C depending on workload.

The fan is adjustable via UniFi’s management interface, offering a choice between balanced operation and higher cooling at the expense of noise.

Noise levels ranged from 31–32 dBA in idle to 35–38 dBA under load, influenced heavily by the vibration of installed drives.

At the front of the unit, UniFi has integrated a 1.47-inch colour LCM display for system information. This provides basic details such as network status, storage health, and system alerts, but it is not touchscreen and cannot be used for configuration.

The lack of interactive control means that most management tasks still need to be handled through the UniFi OS console. LED indicators are also present for system status, and a physical locking mechanism is built into the drive cage, preventing accidental removal.

From a storage perspective, the UNAS 2 supports standard RAID configurations for two drives, namely RAID 0 and RAID 1, in addition to single-disk setups. Given the limitations of two-bay devices, RAID 1 is the most practical option, prioritising data protection over capacity.

The system officially supports large-capacity HDDs, with tests confirming compatibility up to 30 TB drives. However, there is no expansion capability through additional enclosures, and the single USB-C port on the front is limited to attaching external drives for storage or backups. This means users are confined to the internal two-bay maximum, making long-term planning important for deployment.

UniFi UNAS 2 Review – Internal Hardware

The UNAS 2 is built around a quad-core ARM Cortex-A55 processor clocked at 1.7 GHz. This CPU architecture is designed for efficiency rather than high computational output, which makes it suitable for low-power storage operations, but less capable for advanced workloads such as virtualisation, heavy encryption, or on-the-fly media transcoding.

During testing, CPU temperatures generally remained in the 75–80°C range under sustained use, dropping closer to 50–60°C when idle or under light activity. While these figures fall within operating limits, they reflect the modest cooling design of the enclosure and the limited thermal headroom of the ARM-based hardware.

The device includes 4 GB of LPDDR4 memory, which is soldered to the board and cannot be expanded. This fixed allocation is sufficient for handling RAID 1 synchronisation, snapshots, and standard multi-user file operations, but it sets a ceiling on the system’s multitasking capability.

Unlike larger UniFi NAS models that feature 16 GB of memory, the UNAS 2’s hardware is intended only for light to moderate workloads. Memory use during testing reached high utilisation during RAID synchronisation but did not exceed available capacity, suggesting that UniFi has provisioned enough for the intended use case, while keeping the system constrained to its role as an entry-level solution.

The operating system is stored internally and runs independently of the installed drives, leaving both bays available for data. This separation ensures that the system can still boot even if both drives are removed or replaced. Storage management is limited to the basic RAID levels supported by two-bay systems, and no M.2 NVMe slots are included for caching or tiered storage, a feature reserved for larger UniFi NAS models. As such, the internal hardware of the UNAS 2 reflects its role as a secondary or edge device, designed primarily for straightforward storage and backup within a UniFi-managed network.

UniFi UNAS 2 Review – Connectivity & Performance

The UNAS 2 relies on a single 2.5 GbE RJ45 port for both data and power, with PoE++ providing up to 60W of combined budget. This integration reduces cabling and eliminates the need for an external power brick, but it introduces a single point of failure. That said, the UNAS 2 retail kit DOES include a PoE mains adapter, so ultimately the end user does have the option of deploying in a traditional manner (though power and network connectivity are still funnelled into the same connector).

If the cable or port fails, both power and connectivity are lost. A 60W PoE++ injector is included in the package for users without a compatible PoE++ switch, but this approach remains less flexible than traditional dual-port NAS designs. There is no secondary network interface, Wi-Fi connectivity (rare in a system of this scale, but would allow for failover if it was), support of a USB network adapter or option for link aggregation, which makes the system dependent on one connection for all network and power needs.

In addition to the Ethernet port, the front of the device includes a USB-C interface rated at 5 Gbps. This provides the ability to attach external storage devices, enabling data import, backups, or temporary storage expansion. However, the USB port is limited to storage and does not support network adapters, UPS integration, or official expansion enclosures. While the addition of USB-C addresses one omission from the UNAS Pro, its functionality is constrained and focused solely on external drive access.

Network throughput reflects the limitations of a dual-drive ARM-based NAS. In testing with two 8TB HDDs in RAID 1, sequential read speeds reached around 260 MB/s, while write speeds varied between 160–180 MB/s depending on workload. Benchmarks such as AJA and CrystalDiskMark confirmed this pattern, with read performance consistently higher than write due to the processor’s handling of RAID and data caching. These figures make effective use of the 2.5 GbE interface but leave no capacity to challenge higher multi-gigabit standards.

Power consumption aligns with UniFi’s published specifications, averaging 16–17W in idle, 18–20W during light activity, and 23–24W under heavier use. Peak usage during sustained transfers with RAID synchronisation reached approximately 25W, well below the 60W ceiling. Thermal monitoring showed the CPU rising toward 79–80°C under stress, though the chassis fan helped bring temperatures back into the 50–60°C range once load reduced. These results indicate that while the system operates within its defined limits, sustained workloads push the ARM processor and cooling system close to their maximum operating range.

Noise levels were modest, with idle operation producing around 31–32 dBA and workloads raising this to 35–38 dBA. The shared dual-drive cage design contributed to additional vibration, particularly when placed on a hard surface. Rubberised feet help dampen this effect, but vibration noise was noticeably reduced when the device was placed on softer material such as foam. Overall, while the system remains relatively quiet, its acoustic profile is closely tied to the drives selected and the surface it rests on.

• Network Interface: 1 x 2.5 GbE RJ45 (PoE++)

• USB Ports: 1 x USB-C (5 Gbps, storage only)

• PoE Power Budget: 60W (52W available for drives)

• Power Supply: 60W PoE++ injector included

• Max Consumption: 60W (typical 16–25W during use)

• Tested Performance: ~260 MB/s reads, 160–180 MB/s writes (RAID 1, HDDs)

• Noise Levels: 31–32 dBA idle, up to 38 dBA under load

• Temperature Range (Observed): 75–80°C CPU under stress, 50–60°C idle/light use

UniFi UNAS 2 Review – Software and Services

The UNAS 2 runs on UniFi’s NAS management platform, which follows the same single-pane-of-glass interface design seen in the UNAS Pro and UNAS Pro 8. Administration is carried out via a web browser or through a ui.com account, with the option to disable cloud access and operate the system entirely on a local network.

The interface consolidates system status, storage health, user accounts, and backup management into one dashboard. While straightforward to use, it does not provide the same level of customisation or feature depth offered by longer-established NAS operating systems such as Synology DSM or QNAP QTS.

Storage management is limited by the two-bay architecture. Users can create RAID 0 or RAID 1 volumes, or operate drives independently. Drive health monitoring, temperature reporting, and snapshot scheduling are all included, allowing basic resilience and file recovery options.

Snapshots can be created and managed at the folder level, with the ability to lock snapshots to prevent deletion. Encryption, however, does not appear to be available on the UNAS 2, in contrast to larger UniFi NAS models where encrypted volumes are supported.

Backup functionality includes both system configuration and file-level options. Configuration backups can be stored locally or uploaded to a ui.com account, allowing the system to be restored quickly if reset or replaced. File-level backups extend to other UniFi NAS systems and selected cloud services, including Google Drive, with scheduling available for automation.

Local LAN backups to other storage devices via SMB are also supported, though filtering and exclusion rules are limited. The system is therefore capable of basic backup routines but lacks the more granular tools available on competing platforms.

User and access management is integrated into the UniFi ecosystem. Administrators can create local accounts or bind accounts to UniFi’s identity services, with two-factor authentication supported via the UniFi Verify app.

Permissions can be set at the folder level, and users can be restricted to LAN-only access if required. Supported protocols include SMB and NFS, but there is no iSCSI target functionality, limiting its application in virtualisation or editing workflows.

The software also includes fan control and system monitoring tools, but resource reporting is basic, with only CPU and memory utilisation graphs available.

Overall, the software reflects UniFi’s effort to balance simplicity with integration, but it remains less comprehensive than that of established NAS vendors.

UniFi UNAS 2 Review – Verdict and Conclusion

The UniFi UNAS 2 is presented as a compact and affordable two-bay NAS designed for straightforward storage and backup tasks, particularly within environments already using UniFi networking hardware. Its PoE++ design is distinctive, allowing both power and connectivity to be delivered over a single cable, simplifying installation where compatible PoE switches are available. This approach aligns with UniFi’s strategy of reducing external hardware requirements, though it also means that a failed port or damaged cable will disable both power and network access simultaneously. For non-UniFi users, the reliance on PoE++ creates an additional barrier, as adoption requires either compatible infrastructure or the included 60W injector. The shared dual-drive tray, lack of hot-swap support, and absence of expansion options further reinforce the system’s role as a fixed-capacity solution, best suited to smaller or secondary deployments. With a maximum drive budget of 52W and overall consumption limited to 60W, the device is power-efficient, but its architecture prioritises simplicity over flexibility.

On the software side, the UNAS 2 provides a user-friendly interface with access to snapshots, RAID configuration, system backups, and integration into the UniFi identity ecosystem. However, the limited hardware constrains the range of features available, and certain tools seen in UniFi’s larger NAS models are absent, such as encrypted volumes or extended network protocol support. Performance testing showed sequential read speeds up to 260 MB/s and write speeds around 160–180 MB/s, which make full use of the 2.5 GbE interface but leave little headroom for more demanding tasks. Thermals during extended use regularly pushed the CPU into the high 70s Celsius, and although fan management can be adjusted, sustained workloads highlight the limits of the system’s cooling design. The software’s omission of iSCSI and advanced backup filters also narrows its role, making it less competitive against established vendors in professional or virtualisation scenarios.

Ultimately, the UNAS 2 is most appropriately positioned as an edge or secondary NAS, providing basic networked storage for existing UniFi users who value plug-and-play deployment and ecosystem consistency, but it is not equipped to serve as a primary system in larger or more demanding environments (VMs, Containers, etc). A great and unique NAS that will nbe at it’s most appealing if you are already invested in the UniFi ecosystem, or have a NAS already that needs a network backup.

You can buy the UniFi UNAS 2 NAS via the link below – doing so will result in a small commission coming to me and Eddie at NASCompares, and allows us to keep doing what we do! 

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

TRY CHAT

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

☕ WE LOVE COFFEE ☕