A Guide to Compatible M.2 Heatsinks for PS5 Internal Storage Upgrades

Compatible PS5 SSD Heatsinks – Stay Cool!

UPDATE  – The PS5 FULL/PUBLIC Software Update to enable SSD Upgrades on the PS5 Goes Live Globally on September 15th 2021

So, now that PS5 is in the process of enabling PS5 Storage Expansion slot for M.2 NVMe SSDs, many users who have got early access to the beta software update are wondering about heatsinks. For those that do not know, the super-fast type of storage that is used in the Playstation 5 storage upgrade slot is M.2 NVMe SSD (PCIe Gen 4×4). This type of SSD might be very fast, however, it also gets quite HOT! These SSD are traditionally purchased in bare PCB covered sticks (similar to memory or RAM) that has all of the cells (known as NAND) where all your data lives (as well as other chips for the controller, memory, etc). SSDs have no moving parts but electricity is passed through them to read the data directly from the cells and NAND exceptionally rapidly. This means that the M.2 NVMes can rise in temperature quite rapidly when in access and when they get too hot, they will drop in performance significantly. Alongside this the lifespan of an SSD may likely decrease as its operational temperature is consistently high. This is what Heatsinks are for – they draw the heat from the SSD into a solid chunk of ridged metal that allows the heat to be dissipated in the surrounding air. Sony clearly made provisions for this by allowing a bulk of space around the SSD area of the PS5 to install a heatsink. But what is the best kind of SSD heatsink for the PS5, are there ones to avoid, how big can you go, and which one should you buy? Let’s find out.

Find my FULL PS5 SSD Storage Upgrade Guide HERE , Or I have listed the Best M.2 NVMe SSDs for your PS5 Storage upgrade Below:

PS5 SSD Heatsinks – The Do’s and Don’ts

Most M.2 NVMe SSD that you might look at for your PS5 will NOT arrive with a heatsink. Some brands do include optional heatsinks for $20-40, but there will likely be PC-Grade gamer heatsinks and much, much too tall for the allocated PS5 Expansion storage slot for upgrades. Sony provided a handy upgrade guide for how big the NVMe SSD needs to be, alongside details of the type that is recommended. See below:

Now, there are ALOT of M.2 NVMe SSD Heatsinks on the market – THOUSANDS! So it is important to know which ones are compatible and which ones you should completely avoid. Heatsink AND SSD together should NOT exceed in millimeters 110mm (L) x 25mm (W) x 11.25mm (H) and in inches 4.33in (L) x 0.984 in (W) x 0.442in (H). Another big thing to remember is that some SSD heatsinks use rubber bands to hold the M.2 NVMe SSD and the HEATSINK together. I would strongly recommend avoiding these kinds of heatsinks as they have a tendency not to last vast amounts of time and the silicon rubber bands (if produced poorly) can wear away. I strongly recommend a met surrounding heatsink case/enclosure like the one below, as it has 2 layers of internal thermal padding, the metal surrounding the whole SSD (assisting heat dissipation) and is screwed in place.

Last point. The majority of NVMe M.2 PCIe Gen 4×4 SSDs right now are going to be 2280 (that is the length of the SSD), as this tier of SSD have only JUST been released in the last 6-9 months. However, they WILL get longer (to accommodate more storage cells and bigger capacity) so the fact the PS5 supports up to 22110 lengths SSDs is quite handy. If you are reading this guide much later in 2021/2022, then DO CHECK that the SSD  you are installing in your PS5 is 2280 or 22110, as the heatsink will also need to be this length too (as the screw holds an SSD Board mount need to match). This is much, MUCH less of a concern in 2021 however, so you can ignore this right now.

So,  there you have it, those are the do’s and don’ts for buying a heatsink for your PS5 SSD upgrade. Below are 5 great examples of M.2 NVMe SSD Heatsinks that will fit in your PS5 Expansion slot. They vary in price, design, height, colour and density. Take a look:

UPDATED – The Recommended Ones Below Keep Selling out, so I have added more!

Sabrent PS5 SSD Designed Heatsink – $19.99

• DESIGNED FOR PS5: Engineered to fit perfectly and easily into the PS5 SSD expansion slot. The installation has never been easier on the PS5
• REVOLUTIONARY COOLING: Made from High-Quality CNC’d aluminium, the Sabrent PS5 Heatsink was specifically designed to maximize cooling performance and simplify the installation
• UPGRADE YOUR PS5! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 cover. This allows for better cooling using the native fan as well as being a larger heatsink
• INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent’s “Sandwich Design” which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands
• CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation

ElecGear PS5 SSD Designed Heatsink – $34.99

• [PS5 NVMe Heatsink] – The patent-pending cooler is exclusively designed for PlayStation 5 internal NVMe SSD. It features a heat pipe and a huge solid aluminum heatsink. The high performance comes from the numerous cooling fins and the delicate utilization of air circulation sucked by PS5 main cooling fan. The streamlined profile is a snag fit with the middle frame of PS5 chassis. The heatsink is the ultimate cooling solution to the heat management of extreme Gen4 gaming SSD
• [Heat Pipe and Thermal Pads] – A 5mm heatpipe seamlessly embedded in the lower aluminum deck. The passive design with no cooling fan is aiming for being totally silent. The heat produced by SSD will be absorbed by the heat pipe and effectively conducted to the extensive aluminum fins. Two pieces pre-divided thermal pads are included for excellent heat connection. 0.8mm and 1.5mm thickness option adapts to any PCIe NVMe M.2 SSD
• [Improved Mounting Post] – It seems the leading maker Sony does not belong to M.2 SSD industry. We don’t think that the stock screws mount M.2 SSD appropriately in the memory compartment. ElecGear did it better with a re-designed fixing structure for your gaming SSD. The modified guide post, standard M.2 screw and even a copper washer to adjust the height of SSD are included in the box
• [Compatibility Note] – The cooler fits both PS5 Ultra HD and Digital editions. In terms of hardware, it’s compatible with any standard NVMe M.2 solid state drive. Fully tested with WD Black SN850, Samsung 980 Pro and Sabrent Rocket NVMe 4.0. It supports 2230, 2242, 2260, 2280 form factor and also works with 22110 in the future. Please be noticed: The SSD maker’s thin heatsink should be removed before installing, for example, Corsair-Force MP600 and ADATA XPG

PNY XLR8 Gaming PS5 SSD Designed Heatsink – $24.99

PNY XLR8 PS5 SSD Heatsink is designed for PS5, integrating the original PS5 SSD cover, PNY offers a brilliant design, combined the cover with heatsink which provides extreme cooling performance, taking your extra upgraded PS5 NVMe SSD to the extreme. Not only can you destroy the competition, and play more games, but your system can look good while doing so.

• Part No : M22110PSVHS-XR-RB
• Design to integrate PS5 SSD cover & heatsink
• Greatly improves cooling efficiency
• Included spare screws x1 + Thermal pads
• Compare to no heatsink, cools downs the SSD over 40%*
• Recommended SSD: XLR8 CS3140 Gen 4×4

INEO / GRAUGEAR PS5 SSD Designed Heatsink G-PS5HS01 – $34.99

The new GRAUGEAR/INEO heat pipe cooler G-PS5HS01 reduces the temperature of your M.2 NVMe SSDs in the PlayStation®5 by up to 50% and thus contributes to a longer lifetime of your SSDs. The performance of your M.2 NVMe SSDs is also positively influenced by the GRAUGEAR/INEO heat pipe cooler G-PS5HS01. The Ø7mm copper heat pipe and the copper fins and aluminium heat sink ensure maximum performance.

• Heat Pipe from Copper maximum performance
• The reduced temperature of M.2 NVMe SSD up to 50%
• Designed for PlayStation®5
• Compatible with Single/Double-sided M.2 2280 SSDs
• 1 x G-PS5HS01, 4 x Thermal Pads
• 1 x Screwdriver1 x SSD mounting screw
• 1x Screws, 1 x Manual, 1 x Warranty card

QIVYNSRY M.2 heatsink 2280 SSD Double-Sided Heat Sink

• Designed for desktop computers, but works with PS5
• Aluminum body, Anodic Oxidation Surface Treatment;
• with 10°C – 30°C cooling effect;
• Compatible with Singel/Double sided M.2 NVME NGFF SSD;
• Easy to install, and not damage the hard disk.

Includes:

• 1* EZ NVMe Heatsink-Silver
• 2* Thermal pads
• 5* Screws.
• 1* Installation guide.

SUPER BUDGET OPTION – Akuoly M.2 SSD Heatsink 4 Pack Aluminum Heatsink Cooler Cooling

• To Save Your Device from Fail Prematurely–Reduce the risk of hardware failure due to overheating. The gap of these Akuoly heatsinks between the larger fins increases the area of the board and thus provides for greater heat transfer
• Made of High Quality Aluminum–Made of high quality aluminum, great thermal conductivity. An aluminum heatsink is a passive heat exchanger that efficiently transfers heat through electronic signal or mechanical signal with device, thus keeping a regulation of the temperature of the device at an optimal level
• Suitable for Various Devices–Suitable for heating elements on Wi-Fi routers, M.2 SSD, AC adapters, chargers, high power amplifier transistor semiconductor devices and so on
• Cheerful 4 Pack Heatsink & Thermal Pads– 4 pieces x aluminum heatsink Cooling Fin (each 70mm x 22mm x 6mm), large surface area and great fins; with 4 pieces of double-sided thermal tape whose thermal conductivity: about 1.3 W / (m·K).

• Material: Aluminum
• Size: 70mm (L) x 22mm (W) x 6mm (H)
• Package: 4 Pack x Aluminum Heatsink Cooling Fins
• 4 Pieces Double-sides Thermal Tape whose thermal conductivity: about 1.3 W / (m·K).

SGTKJSJS M.2 Heatsink SSD Cooler for PCIE NVME

Excellent little kit. Comes with: A screwdriver, a cleaning and drying towelette(not needed if the m.2 is new and/or not dusty) and it has two dark blue(.5mm) for the bottom(U bracket) and two light blue(1mm) for the top(heatsink) for 2 m.2 drives. There is a protective film on BOTH sides of each of the thermal tape pieces. Remove BOTH piece of film of EACH of the thermal tape pieces and apply them. Once the thermal tape is on both sides(1 blue-bottom, 1 light blue-heatsink) place the bottom of your m.2 drive into the U bracket/bottom of the thermal unit. Next make sure that the top piece(heatsink) has the open spot for the screw for your motherboard facing the back to leave space to attach . Next line up the holes and gently drop the top heatsink in to the U bracket/bottom.

Package list

• M.2 SSD heatSink  X2

• Silicone thermal pad   X4

• Fixing screw  X8

• screwdriver  X1

EZDIY-FAB M.2 2280 SSD heatsink

Double-Sided Heat Sink, High-Performance SSD Cooler for PCIE NVME M.2 SSD or SATA M.2 SSD- Red or Black – $15

• Designed for desktop computers, but works inside PS5
• Aluminum material for best heat dissipation and maximum performance.
• Compatible with Singel/Double sided M.2 2280 SSDs.
• Easy to install.
• Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.

Includes:

• 1* EZ NVMe Heatsink-Silver
• 2* Thermal pads
• 5* Screws.
• 1* Installation guide.

MHQJRH M.2 2280 SSD heatsink – SINGLE SIDE SSD USE ONLY – VERY TIGHT FIT!!

Double-Sided Heat Sink, Matching Thermal Silicone pad for PCIE NVME M.2 SSD or SATA M.2 SSD – $9.99

• Designed for Compact M.2 NVMe SSD Installation
• Aluminum body, Anodic Oxidation Surface Treatment.
• Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C – 30°C cooling effect.
• Compatible with Singel/Double-sided M.2 2280 SSDs.
• Easy to install, and not damage the SSD
• Advancing Gene thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD label.

Includes:

• M.2 SSD heatSink X1
• Silicone thermal pad X3
• Fixing screw X6
• Screwdriver X1

Ice Cold Ineo M.2 heatsink 2280 SSD

Thermal Silicone pad for M.2 PCIE NVMe SSD – $10.99

• The NVMe heatsink are able to support the NVMe SSD type 70x20mm
• Please place the silicone cooling pad between the heatsink and the SSD to prevent damage to the SSD and protect the particles of the SSD, which can effectively extend the life of your SSD.
• Package including: 1 NVMe Aluminum heatsink, 2 silicone thermal pad, 1 user manual, 1 screw driver , 1 guarantee card, 1 screw
• Each product has strict tested before We sent it to you and offer 1 Year Limited Warranty, Life-time free technical support by ineo.

Includes:

• 1 NVMe Aluminum heatsink
• 2 silicone thermal pad
• 1 user manual
• 1 screw driver
• 1 1 screw

WARSHIP Pro M.2 2280 SSD Heatsink

PCIE NVME or SATA m2 2280 SSD Double-Sided Heat Sink – Black – $8.99

• Suports PCIE NVME M.2 2280 size SSD or SATA M2 2280 size SSD
• Aluminium alloy, silver plating , anodic oxidation surface treatment
• Easy to install, NO damage to the SSD.
• Aluminum alloy-Groove design with 10°C – 30°C cooling effect

Includes:

• HeatSink X2
• Big Silicone thermal pad X 2
• Small Silicone thermal pad X 10
• Screws X 6
• Screwdriver X1

Best Budget Choice – Nankui SSD Heatsink Surround – SINGLE SIDE SSD USE ONLY – VERY TIGHT FIT!!

NVMe Heatsink for m.2 2280 SSD,Double-Sided Cooling – $5.99

• Originally designed for desktop computers, This M.2 SSD heatsink compatible with all single sided Type.
• Simple Lock design, easy to install
• Double Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 7°C – 30°C cooling effect (Varies depending on the environments), Ensure the high-speed and long-lasting performance of SSD, continuous high-speed reading and writing and long-term game performance are still strong
• Main body material: Aluminum alloy, anodic oxidation surface treatment. Dimensions: 76.5*24.*12mm , Nano Silicon Grease Material Dimensions：70*20*T.4 ，Thermal conductivity：3W/m-k

Includes:

• M.2 SSD heatSink X1
• Silicone thermal pad X3
• No Screws – Clicks Shut

All PS5 Compatible SSDs in 2021/2022 – UPDATED

Although Sony enabled the Playstation 5 SSD expansion slot in Summer 2021, they have yet to issue a FULL compatibility list of ALL drives that can be used. I have been testing a huge number of M.2 NVMe SSDs with PS5 in the last 3 months in order to create a master list of all the drives that work (here on the blog, as well as over on YouTube in my PS5 SSD Test Series HERE). Below is a breakdown of all the currently available and supported SSDs that are compatible with PS5 (with help on Reddit, Twitter and others).

BLUE = COMPATIBLE

GREY = UNCONFIRMED

BRAND	MODEL ID	SIZES	CONTROLLER	NAND	R/W SPEED	CHECK AMAZON
Acer	Predator GM7000	512, 1TB, 2TB	Innogrit 1G5236	Micron3D TLC	7,400 / 6,700 MB/s
ADATA	XPG Gammix S70 Blade	1TB, 2TB	Innogrit IG5236	3D Nand	7.4K / 6.4K MB/s
ADATA	XPG Gammix S70	1TB, 2TB	Innogrit Rainer IG5236	Micron 3D TLC	7.4K / 6.4K MB/s
ADATA	XPG Gammix S50 Lite	1TB, 2TB	Silicon MotionSM22 67	Micron 3D TLC	3.9K / 3.2K MB/s
ADATA	XPG Gammix S50	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Addlink	A95	1TB, 2TB	Phison PS5018-E18	Micron3D TLC	7.1K /6.8K MB/s
Addlink	A92	1TB, 2TB, 4TB	Phison PS5016-E16	Micron QLC	4.9K / 3.6K MB/s
Addlink	A90	1TB, 2TB	N/A	3D TLC	5.0K / 4.4K MB/s
Addlink	H90 with heatsink	1TB, 2TB	N/A	3D TLC	5.0K / 4,4K MB/s
Addlink	S90 no heatsink	1TB, 2TB	N/A	3D TLC	5.0K / 4,4K MB/s
Apacer	AS2280Q4	500, 1TB, 2TB	Phison PS5016-E16	3D TLC	5.0K / 4.4K MB/s
Asgard	AN4	512, 1TB, 2TB	Innogrit IG5236	YNTC 3D TLC	7.5K / 5.5K MB/s
Corsair	MP600 Pro XT Hydro X	2TB, 4TB	Phison PS5018-E18	Micron3D TLC	7.1K / 6.8K MB/s
Corsair	MP600 Pro XT	1TB, 2TB, 4TB	Phison PS5018-E18	Micron3D TLC	7.1K / 6.8K MB/s
Corsair	MP600 Pro Hydro X	2TB	Phison PS5018-E18-41	3D TLC	7.0K / 6.55K MB/s
Corsair	MP600 Pro Standard	1TB, 2TB, 4TB	Phison PS5018-E18-41	Micron3D TLC	7.0K / 6.55K MB/s
Corsair	MP600 Core	1TB, 2TB, 4TB	Phison PS5016-E16	3D QLC	4.95K / 3.95K MB/s
Corsair	MP600	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	4.95K / 4.25K MB/s
Crucial	P5 Plus	500, 1TB, 2TB	Crucial NVMe	Micron TLC	6.6K / 5.0K MB/s
Galax	HOF Pro	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Gigabyte	Aorus 7000S	1TB, 2TB	Phison E18	Micron TLC	7.0K / 6.85K MB/s
Gigabyte	Aorus	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.0K MB/S
Goodram	IRDM Ultimate X	500, 1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0 / 4.5K MB/s
Inland	Performance Plus	1TB, 2TB	Phison PS5018-E18	Micron3D TLC	7.0 / 6.85 GB/s
Integral	Ultima Pro X3	500, 1TB, 2TB	N/A	3D TLC	5.0 / 4,4K MB/s
Intel	DC P5800X	400, 800, 1.6TB	Intel	InteL Optane 2nd Gen	7.4 GB/s / 7.4
Kingmax	PX4480	500, 1TB, 2TB	Phison PS5016-E16	3D Nand	5.0 / 4.4K MB/s
Klevv	CRAS C920	1TB, 2TB	Phison PS5018-E18	3D TLC	7.0K / 7.0K MB/s
Lexar	NM800	500, 1,000 GB	InnoGrit IG5236	3D TLC	5.8K / 7.4K MB/s
Micron	3400	512, 1TB, 2TB	Micron Based	Micron 3D TLC	N/A
Micron	2450	256, 512, 1TB	N/A	Micron 3D TLC	N/A
MSI	Spatium M480	500, 1TB, 2TB	PhisonPS5018-E18	Micron 3D TLC	7.0K /6.85K MB/s
MSI	Spatium M470	1TB, 2TB	Phison PS5016-E16	Kioxia 3D TLC	5.0K / 4.4K MB/s
Mushkin	Gamma	1TB, 2TB	Phison PS5018 E18	Micron 3D TLC	7.1 / 6.8 MB/s
Mushkin	Delta	1TB, 2TB, 4TB	Phison PS5016-E16	Micron 3D TLC	4.9 / 3.9 MB/s
Patriot	Viper VP4300	1TB, 2TB	Innogrit Rainier IG5236	Micron 3D TLC	7.4K / 6.8K MB/s
Patriot	Viper VP4100	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Plextor	M10P Series	512, 1TB, 2TB	Innogrit Rainier IG5236	Kioxia TLC	7.0K / 5.0K MB/s
PNY	XLR8 CS3140	1TB, 2TB	Phison PS5016-E18-41	Micron 3D TLC	7.5K / 6.85K MB/s
PNY	XLR8 CS3040	500GB, 1TB, 2TB	Phison PS5016-E16-32	Toshiba 3D TLC	5.6K / 4.3K MB/s
Sabrent	Rocket 4 Plus	500, 1TB, 2TB, 4TB	Phison PS5018-E18	Micron 3D TLC	7.2K / 6.9K MB/s
Sabrent	Rocket Q4	1TB, 2TB, 4TB	Phison PS5016-E16	Micron 96L QLC	4.9K / 6.85K MB/s
Sabrent	Rocket NVMe 4.0	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Samsung	PA9A1 (OEM)	250, 500, 1TB, 2TB	Samsung Elpis	Samsung 3D TLC	7.0K / 5.2K MB/s
Samsung	980 Pro	250, 500, 1TB, 2TB	Samsung Elpis	Samsung 3D TLC	7.0K / 5.0K MB/s
Seagate	FireCuda 530	500, 1TB, 2TB, 4TB	Phison PS5018-E18	Micron 3D TLC	7.0K / 6.9K MB/s
Seagate	FireCuda 520	1TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Seagate	FireCuda 520	500, 1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Silicon Power	US70	1TB, 2TB	Phison PS5016-E16	3D Nand	5.0K / 4.4K MB/s
Smartbuy	Stream E19T	500, 1TB	Phison PS5016-E19-35	Toshiba 3D TLC	3.3K / 3.0K MB/s
Smartbuy	Impact E16	500, 1TB, 2TB	Phison PS5016-E16	3D TLC	5.0K / 4.4K MB/s
Team Force	Cardea Z44Q	2TB, 4TB	Phison PS5012-E161	Micron 3D QLC	5.0K /4.0K MB/s
Team Force	T Create Classic	1TB, 2TB	Phison PS5016-E16	Kioxia 3D TLC	5.0K / 4.4K MB/s
Team Force	Cardea Ceramic A440	1TB, 2TB	Phison PS5086-E18	Micron TLC	7.0K / 6.9K MB/s
Team Force	Cardea Ceramic C440	1TB, 2TB	Phison PS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Team Force	Cardea Zero Z440	256, 512, 1TB	PhisonPS5016-E16	Toshiba 3D TLC	5.0K / 4.4K MB/s
Transcend	MTE240S	512, 1TB	N/A	3D TLC	3.8K / 3.2K MB/s
Western Digital	Black SN850	500, 1TB, 2TB	SanDisk 8-Channel	96L Bics4	7.0K / 5.1K MB/s

PS5 COMPATIBLE UPGRADE SSDs SEPT 2021

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔

Δ

🔒 Join Inner Circle

Get an alert every time something gets added to this specific article!

NOTIFY ME

Want to follow specific category? Also Read... 📧 Subscribe

You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

Your Name (required)

Your Country (required)

Your Email (required)

Subject

Estimated Budget

Storage in GB/TB Required (if NAS, DAS or SAN)

Use case environment (Business/Home)

Your Message (900 char. Or use Fast Track)

By clicking SEND you accept this Privacy Policy
Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
🔒Private Fast Track Message (1-24Hours)

Δ

TRY CHAT Terms and Conditions

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

 

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

Summary

Reviewer

Robbie

Review Date

2021-07-30

Reviewed Item

A Guide to Compatible M.2 Heatsinks for PS5 Internal Storage Upgrades

Author Rating

5