Seagate SSD Buyers Guide – Barracuda, FireCuda, Ironwolf and Nytro Difference

Choosing a Seagate SSD – Get it Right First Time

Making sure you buy the right storage media for your hardware is so very important. In the old days, when buying Hard Drives, it was so much simpler, as the technology was diverse but much easier to understand. With newer and faster flash media, the industry over the last 10-15 years has had to adapt to brand new yardsticks with which to measure their technology against in order to maintain both quality and price. Solid State Drive (SSD) technology is something that, though once considered out of the reach of the average consumer, is now very, very common. Considerably faster than the much older HDD technology, SSDs are now featured inside almost every commercial technology device that we use today in some large or small form. One of the biggest brands in the world of storage in 2020/2021 is Seagate Technology and unsurprisingly, they have an impressive selection of SSDs available to buy in their product portfolio. This combined with Seagate being a domineering force in the world of hard drives has resulted in their investment in SSDs and a wide range of solutions on offer being incredibly diverse and confusing. So, if you are in the market to buy a new SSD from Seagate, it can be awfully confusing and you can spend hours trying to narrow down the literal hundreds of SSDs on offer to the right one, losing hours along the way. Never fear, I have taken the time to break down the four key product families (Seagate Barracuda – FireCuda – Ironwolf – Nytro) and separated them into what each one is designed for, what each one can do, what it cannot and ultimately help you decide the best SSD for your storage needs. However, before we start, it is worth taking a moment to learn about the key buying factors that affect the performance and suitability of any SSD compared with another

Choosing the Right Seagate SSD – A Guide to the Terminology

SSDs and HDDs are different in so many ways and even if you have years of experience in the world of hard disks (with Platters, Actuators and RPMS), this all get’s shelved when you move into the world of SSDs. Before we discuss each of the Seagate Barracuda, Ironwolf, Nytro and Firecuda SSD family members, it is worth highlighting some of the most common buying factors that affect the performance and durability of an SSD. It is with these that you can measure the suitability of the SSD with your own personal/business needs. Often the higher the capacity of an SSD, the lower the durability (unless you go towards exceptionally high-end NAND), or the fact that the most expensive SSD does not always guarantee the highest IOPs, or negate the lower drive writes per day. Below are the key factors that you should keep an eye on when looking at the specifications and build of an SSD.

NAND Types (the Cells/Chips used in the SSD) –

• SLC: Single-level cell NAND flash supports 50,000 to 100,000 write cycles
• MLC: The 2-bit data multi-level cell (MLC) flash generally takes up to 3,000 write cycles. eMLC (enterprise MLC) sustains up to10,000 write cycles, and can reach 35,000 cycles on 3D NAND
• TLC: Triple-level cells (3-bit) NAND flash is low at 300-1000 write cycles, and can achieve 1500-3000 write cycles with 3D NAND
• QLC: Quad Layer Cells, featuring 4 Bit flash – Highest Capcity available at the lowest price, but lower durability overall. Requires improved controllers for stability
• 3D NAND Technique – Method of stacking/writing data vertically on chips, resulting in even faster retrieval and more efficient space utilization. Often featured with TLC and MLC NAND
• eXLC – Often featured as eMLC, eTLC, and eQLC, it is an enterprise-quality build and utilization of the existing MLC/TLC/QLCNAND usually featured for improved consistent speeds and more write cycles on balance

TCO – Total Cost of Ownership, In a TCO calculation, cost per gigabyte still has a role, but it’s only a very small part of a much bigger picture. Other metrics – such as IOPS per watt and capacity and performance per rack – also come into play. The truth is that TCO can’t be measured with any single metric; it’s a mix of several measures that should be weighted according to the unique workloads of the storage system.

IOPS – Input/output operations per second – (IOPS, pronounced eye-ops) is an input/output performance measurement used to characterize computer storage devices like hard disk drives (HDD), solid state drives (SSD), and storage area networks (SAN).

TBW – Terabytes Written – measures how much you can write cumulatively into the drive over its lifetime

DWPD – Drive Writes Per Day – specification of a drive to calculate the number of times that the user capacity of a drive can be written per day over the warranty period

TBW ÷ (warranty years × 365 days/year× Drive Capacity in GB) = # DWPD

MTBF – Mean Time Between Failures, is a popular measurement for HDDs but not as meaningful for SDDs.

ECC – (error correction code) software corrects random bit errors that are quite common in NAND flash, and helps to correct bit errors from wear. By correcting both types of errors, ECC lengthens the lifetime of a block.

TRIM – These commands are not typically error-checking tools, but do improve performance by immediately wiping deleted pages or blocks. Without TRIM, the SSD controller does not actually wipe deleted data until it is ready to write new data to the same location

Seagate BARRACUDA SSD Range – For Home, Domestic and Standalone Use

The Seagate Barracuda series of SSD is very much like the HDD series of the same name. We start with the BEST cost vs hardware SSD drive of all, the Seagate Barracuda SSD series. These are designed with day to day access and long term use in mind, as well as arriving in both a SATA and NVMe form. Once these would have been recommended for use for your operating system inside a non-mission-critical PC (general browsing etc), but now with the inexpensive of SSD even at 1TB and it becoming ideal for your operating system, start-up and primary apps, the Barracuda 120 SSD moved into being more than just a bog-standard SSD and is now an impressively scaled drive, with the Barracuda 510 NVMe SSD serving as a good commercial/SMB drive for PCIe equipped user devices.

NVMe and SATA Supported, PC, Laptop and Ultrabook Storage Upgrades

BarraCuda 120 SATA SSD Highlights

Marginally higher TBW, lower power consumption so lower TCO, 3D TLC NAND, 90K R/W IOPs, 560MB/s Read and 540MB/s Write, 5 Year Warranty, 250GB-2TB

SSD Family	Seagate BarraCuda
NAND Type	3D NAND TLC
Model	ZA250CM1A003
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	540MB
Random Read (Max, IOPS), 4 KB QD32	90,000
Random Write (Max, IOPS), 4 KB QD32	90,000
Total Terabytes Written (TBW)	150TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZA500CM1A003
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	540MB
Random Read (Max, IOPS), 4 KB QD32	90,000
Random Write (Max, IOPS), 4 KB QD32	90,000
Total Terabytes Written (TBW)	300TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZA1000CM1A003
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	540MB
Random Read (Max, IOPS), 4 KB QD32	90,000
Random Write (Max, IOPS), 4 KB QD32	90,000
Total Terabytes Written (TBW)	600TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZA2000CM1A003
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	540MB
Random Read (Max, IOPS), 4 KB QD32	90,000
Random Write (Max, IOPS), 4 KB QD32	90,000
Total Terabytes Written (TBW)	1170TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5

BarraCuda 510 NVMe SSD Highlights

3D TLC NAND and a PCIe Gen3 ×4, NVMe 1.3, Upto 600K R/W IOPs, Upto 3,000MB/s Read and 3000MB/s Write, 5 Year Warranty, 250GB- 1TB

SSD Family	BarraCuda 510
SSD NAND Type	3D NAND TLC
Model	ZP250CM3A001
Sequential Read (Max, MB/s), 128 KB	3100MB
Sequential Write (Max, MB/s), 128 KB	1200MB
Random Read (Max, IOPS), 4 KB QD32	210,000
Random Write (Max, IOPS), 4 KB QD32	280,000
Total Terabytes Written (TBW)	160TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZP500CM3A001
Sequential Read (Max, MB/s), 128 KB	3400MB
Sequential Write (Max, MB/s), 128 KB	2400MB
Random Read (Max, IOPS), 4 KB QD32	410,000
Random Write (Max, IOPS), 4 KB QD32	540,000
Total Terabytes Written (TBW)	320TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZP1000CM3A001
Sequential Read (Max, MB/s), 128 KB	3400MB
Sequential Write (Max, MB/s), 128 KB	3000MB
Random Read (Max, IOPS), 4 KB QD32	600,000
Random Write (Max, IOPS), 4 KB QD32	600,000
Total Terabytes Written (TBW)	640TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5

Seagate FIRECUDA SSD Range – For Gamer and High Speed, Solo Drive Requirements

If you are looking for one of the best solo-use SSD that Seagate have to offer, you have hit pay-dirt! Serving as the Performance and High Intensive access SSD choice, the Seagate Firecuda series has been circulation for a relatively shorter time compared with the NAS and Desktop SSD media over in both the SSD and HDD industry, as well as arriving at a steeper price point. However, this is largely down to the use of some hugely top-grade NAND, Controllers, choice of interface (one of the latest NVMe revisions you can get, though still compatible with older varients) and arrives in two versions in the 510 and 520 Series, with the latter supporting PCI Gen 4 and up to 5,000MB/s where needed.

Whether it is through the marketing around Seagate Firecuda when it was a hybrid media drive, in the thunderbolt 3 gaming dock or the history of the Seagate Firecuda range previously when Seagate first took steps into NVMe media, those with a background in PC building, PC Gaming and Photo Editing will be aware of this product family – as well as recently in the reveal of Box Series X and PS5 featuring NVMe SSD media and a Seagate Gaming expansion device in the works. Outperforming the majority of the Seagate SSD range, it also features much higher grade TLC NAND and a better controller on the 520 Firecuda, so both performance and durability are impressive, though the available capacities might seem a little lower at 2TB than what many would be used to for 4K projects in post-production – so use them for Live Editing, they are wasted on your archive – so keep them sharp! They are seen as the drive of choice of large scale media editors due to their balance of large capacity vs access speeds

FireCuda 510 NVMe SSD Highlights

3D TLC NAND and a PCIe Gen3 ×4, NVMe 1.3, Upto 600K R/W IOPs, Upto 3,200MB/s R/W, 5 Year Warranty, 500GB- 2TB

SSD Family	Seagate FireCuda 510
SSD NAND Type	3D NAND TLC
Model	ZP500GM3A001
Sequential Read (Max, MB/s), 128 KB	3450MB
Sequential Write (Max, MB/s), 128 KB	2500MB
Random Read (Max, IOPS), 4 KB QD32	420,000
Random Write (Max, IOPS), 4 KB QD32	600,000
Total Terabytes Written (TBW)	650TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZP1000GM30011
Sequential Read (Max, MB/s), 128 KB	3450MB
Sequential Write (Max, MB/s), 128 KB	3200MB
Random Read (Max, IOPS), 4 KB QD32	620,000
Random Write (Max, IOPS), 4 KB QD32	600,000
Total Terabytes Written (TBW)	1300TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZP2000GM30021
Sequential Read (Max, MB/s), 128 KB	3450MB
Sequential Write (Max, MB/s), 128 KB	3200MB
Random Read (Max, IOPS), 4 KB QD32	485,000
Random Write (Max, IOPS), 4 KB QD32	600,000
Total Terabytes Written (TBW)	2600TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5

FireCuda 520 NVMe SSD Highlights

Improved n E16 controller results in better performance, 3D TLC NAND and a PCIe Gen 4, NVMe 1.3, Upto 760K R/W IOPs, Upto 5,000MB/s and 4,400MB/s R/W, 5 Year Warranty, 500GB- 2TB

SSD Family	Seagate FireCuda 520
SSD NAND Type	3D NAND TLC
Model	ZP500GM3A002
Sequential Read (Max, MB/s), 128 KB	5000MB
Sequential Write (Max, MB/s), 128 KB	2500MB
Random Read (Max, IOPS), 4 KB QD32	430,000
Random Write (Max, IOPS), 4 KB QD32	630,000
Total Terabytes Written (TBW)	850TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZP1000GM3A002
Sequential Read (Max, MB/s), 128 KB	5000MB
Sequential Write (Max, MB/s), 128 KB	4400MB
Random Read (Max, IOPS), 4 KB QD32	760,000
Random Write (Max, IOPS), 4 KB QD32	700,000
Total Terabytes Written (TBW)	1800TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5
Model	ZP2000GM3A002
Sequential Read (Max, MB/s), 128 KB	5000MB
Sequential Write (Max, MB/s), 128 KB	4400MB
Random Read (Max, IOPS), 4 KB QD32	750,000
Random Write (Max, IOPS), 4 KB QD32	700,000
Total Terabytes Written (TBW)	3600TB
Mean Time Between Failures (MTBF, hours)	1,800,000
Warranty, Limited (years)	5

Seagate IRONWOLF SSD Range – For NAS Caching and Fast Server Access Requirements

The use of solid-state media in NAS drives is something that is fast becoming a booming industry for the storage media brands and Seagate is no exception. Possibly the most well know Seagate drive in 2019-2020, we will talk about today, Seagate Ironwolf is the Drive you need for your NAS Server. If you are looking at buying a brand new Synology NAS for your home or a beefed-up QNAP NAS for your business, then it is paramount you get media that is designed to not only be ready for sporadic and irregular read and write (as your access to the NAS Server will differ constantly) but also media that is designed to be on 24 hours a day, 7 days a week. Alongside the popularity of Seagate Ironwolf in the work of NAS, Seagate has invested heavily in SSD technology and presented an SSD that is tailored for use in NAS drives, both as a means of adding caching to improve performance in/outside of your system, as well as for raw data access over connections like 10Gbe and Thunderbolt 3 NAS. In this environment, a regular SSD is just no longer suited and though will perfect the job, will do so much slower in Read/Write MB/s, have a lower endurance rating, less than ideal TBW and worse of all have a lower IOPs rating than you need – which for caching, can be critical. Lastly, Seagate have featured an NVMe SSD for NAS too, with the Ironwolf 110 being a SATA based drive and the Ironwolf 510 being an NVMe Highspeed drive, designed for use in NAS drive manufacturers products involving the faster NVMe SSD cache systems (Synology DS1621XS+, QNAP TVS-872XT and Asustor LockerStor 10 Pro to name just a few). These NAS drives will take huge advantages in the utilization of the NVMe present in the ironwolf 510, as well as the end-user being able to capitalize on the 1.0 DWPD and impressively high TBW over their lifespan. Finally, the Seagate Ironwolf SSD series (both SATA and NVMe Gen 3×4) arrive with the Durawrite technology to keep the IOPs high and the durability too, but also features 2 years of free forensic level data recovery alongside the 5-year manufacturer warranty – a very, VERY impressive SSD family indeed.

Ironwolf 110 SATA SSD Highlights

3D TLC NAND,1.0 DWPD and SATA 6Gb/s, Upto 90K and 20K R/W IOPs, Upto 560MB/s R/W, 5 Year Warranty, 500GB- 2TB

SSD Family	IronWolf 110 SSD
SSD NAND Type	3D NAND TLC
Model	ZA240NM10011
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	345MB
Random Read (Max, IOPS), 4 KB QD32	55,000
Random R70R (IOPS) Sustained. 4KB QD32	30,000
Random Write (Max, IOPS), 4 KB QD32	30,000
Total Terabytes Written (TBW)	435TB
Mean Time Between Failures (MTBF, hours)	2,000,000
Warranty, Limited (years)	5
Model	ZA480NM10011
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	535MB
Random Read (Max, IOPS), 4 KB QD32	75,000
Random R70R (IOPS) Sustained. 4KB QD32	40,000
Random Write (Max, IOPS), 4 KB QD32	50,000
Total Terabytes Written (TBW)	875TB
Mean Time Between Failures (MTBF, hours)	2,000,000
Warranty, Limited (years)	5
Model	ZA960NM10011
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	535MB
Random Read (Max, IOPS), 4 KB QD32	90,000
Random R70R (IOPS) Sustained. 4KB QD32	50,000
Random Write (Max, IOPS), 4 KB QD32	55,000
Total Terabytes Written (TBW)	1750TB
Mean Time Between Failures (MTBF, hours)	2,000,000
Warranty, Limited (years)	5
Model	ZA1920NM10011
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	535MB
Random Read (Max, IOPS), 4 KB QD32	90,000
Random R70R (IOPS) Sustained. 4KB QD32	65,000
Random Write (Max, IOPS), 4 KB QD32	50,000
Total Terabytes Written (TBW)	3500TB
Mean Time Between Failures (MTBF, hours)	2,000,000
Warranty, Limited (years)	5
Model	ZA3840NM10011
Sequential Read (Max, MB/s), 128 KB	560MB
Sequential Write (Max, MB/s), 128 KB	535MB
Random Read (Max, IOPS), 4 KB QD32	85,000
Random R70R (IOPS) Sustained. 4KB QD32	60,000
Random Write (Max, IOPS), 4 KB QD32	45,000
Total Terabytes Written (TBW)	7000TB
Mean Time Between Failures (MTBF, hours)	2,000,000
Warranty, Limited (years)	5

Ironwolf 510 NVMe SSD Highlights

1.0 DWPD, 3D TLC NAND, PCIe Gen3 ×4, NVMe 1.3, Upto 345K and 28K R/W IOPs, Upto 3,000MB/s and 1,000MB/s R/W, 5 Year Warranty, 500GB- 2TB

SSD Family	IronWolf 510 NVMe
SSD NAND Type	3D NAND TLC
Model	ZP240NM30011
Sequential Read (Max, MB/s), 128 KB	2450 MBps
Sequential Write (Max, MB/s), 128 KB	290 MBps
Random Read (Max, IOPS), 4 KB QD32	100K
Random Write (Max, IOPS), 4 KB QD32	13K
Total Terabytes Written (TBW)	435
Mean Time Between Failures (MTBF, hours)	1,800000
Warranty, Limited (years)	5
Model	ZP480NM30011
Sequential Read (Max, MB/s), 128 KB	2650 MBps
Sequential Write (Max, MB/s), 128 KB	600 MBps
Random Read (Max, IOPS), 4 KB QD32	199K
Random Write (Max, IOPS), 4 KB QD32	21K
Total Terabytes Written (TBW)	875
Mean Time Between Failures (MTBF, hours)	1,800000
Warranty, Limited (years)	5
Model	ZP960NM30011
Sequential Read (Max, MB/s), 128 KB	3150 MBps
Sequential Write (Max, MB/s), 128 KB	1000 MBps
Random Read (Max, IOPS), 4 KB QD32	380K
Random Write (Max, IOPS), 4 KB QD32	29K
Total Terabytes Written (TBW)	1750
Mean Time Between Failures (MTBF, hours)	1,800000
Warranty, Limited (years)	5
Model	ZP1920NM30011
Sequential Read (Max, MB/s), 128 KB	3150 MBps
Sequential Write (Max, MB/s), 128 KB	850 MBps
Random Read (Max, IOPS), 4 KB QD32	290K
Random Write (Max, IOPS), 4 KB QD32	27K
Total Terabytes Written (TBW)	3500
Mean Time Between Failures (MTBF, hours)	1,800000
Warranty, Limited (years)	5

Seagate NYTRO SSD Range – For High-End Flash, Enterprise and Hyper Scale Server Use

And now we reach the very top of the pyramid as far as the Seagate SSD family goes. If you are looking for a business class SAS interface drive, or an NVMe equipped flash server equipped SSD, or even a fraction more legacy but incredibly still functional SATA based SSD for your Synology or QNAP 2.5″ equipped flash server – the Seagate Nytro range is the once for you. Covering a multitude of model numbers and multi-faceted utilization, it is also one of the most intimidating SSD ranges to browse through. Often the choice of Industry and Enterprise Level Applications, as well as modern grade Flash and HyperScale Environments, the Seagate Nytro SSD range, with its utilization of PCIe NVMe, dual 12Gb SAS or SATA is almost certainly the one you need to be looking for if your data is mission-critical and on a much LARGER scale. With the Seagate Nytro 1000 series being designed for SATA, 3000 for SAS and 5000 for NVMe – it all starts to get very complex from there after. Which each sub-range are configuration options that are industry-led, support features such as Secure Data Erasing featured, Self Encryption (SED) and FIPS level encryption (government-grade) on the table, the Seagate Nytro SSD range is by FAR their best performing SSD as far as IOPS, DWPD and TBW come in (once again, thanks to Durawrite on a number of the drives featured), and if you are looking for a data center SSD in 2020/2021 without the fuss, then look no further! Just remember that this is top end and as such, arrives with an eye-watering price tag. Additionally, you need to factor in that despite the 1.0-3.0 Drive writes per day and data writes are factoring into Petabytes, these are still drives designed for hyper intensive operations and therefore are built with periodic replacement at the end of each warranty/write cycle period – so remember this is a long term commitment drive.

Seagate Nytro 1000 Series Highlights

SATA 6 Gb/s – up to 3.8 TB, – 2.5-in,  -3D TLC NAND, 1.0 DWPD, up to 564 MB/s R/W, up to 94K IOPS (Up to 23K IOPS Write)

Seagate Nytro 1000	Nytro 1551 SSD	Nytro 1351 SSD
Interface	SATA	SATA
Capacities	3.8 TB, 1.9 TB, 960 GB, 480 GB, 240 GB	3.8 TB, 1.9 TB, 960 GB, 480 GB, 240 GB
DWPD	3 DWPD	1 DWPD
Sequential Read	564 MB/s	564 MB/s
Sequential Write	536 MB/s	536 MB/s
Random Read IOPS	94K IOPS	94K IOPS
Random Write IOPS	61K IOPS	61K IOPS
Years Warranty	5 Years	5 Years
User
Databases, virtual desktop infrastructure, cloud services	✔
Tiered storage analytics, web server, read-intensive		✔

Seagate Nytro 5000 Series Highlights

PCIe Gen3 x4, NVMe 1.2a (or M.2 22110 NVMe) – 400GB, 1.9 TB, 3D cMLC, 1.5 DWPD – 2.5-in, M.2 – up to 2 GB/s (2000MB/s) Performance – up to 245K IOPS (Up to 67K IOPS Write), SED Models Available, 5yr Warranty

Seagate Nytro 5000	Nytro 5000 2.5”	Nytro 5000 M.2 22110
Interface	PCIe Gen3 x4, NVMe 1.2a	PCIe Gen3 x4, NVMe 1.2a
Capacities	1.9TB, 1.6TB, 960GB, 800GB	1.9TB, 1.6TB, 960GB, 800GB, 480GB, 400GB
DWPD	3 DWPD	1.5 DWPD
Sequential Read	2,000 MB/s	2,000 MB/s
Sequential Write	1,200 MB/s	1,200 MB/s
Random Read IOPS	245K IOPS	245K IOPS
Random Write IOPS	67K IOPS	67K IOPS
Years Warranty	5 Years	5 Years
User
High-density data centres, public & private cloud,DAS,
caching, tiering + environments	✔	✔

Seagate Nytro 3000 Series Highlights

Dual 12Gb/s SAS (so potential 24Gb/s),  400GB – 15 TB – 2.5-in, 3D Emlc (3D eTLC in bigger drives),  1.0-1.5 DWPD, up to 2.2 GB/s (2200MB/s), up to 240K IOPS (Up to 67K IOPS Write), 10.0 DWPD, SED and FIPS Models Available, 5yr Warranty

Seagate Nytro 3000	Nytro 3731	Nytro 3531	Nytro 3331	Nytro 3131	Nytro 3530	Nytro 3330
Interface	12 Gb/s SAS Dual-port	12 Gb/s SAS Dual-port	12 Gb/s SAS Dual-port	12 Gb/s SAS Dual-port	12 Gb/s SAS Dual-port	12 Gb/s SAS Dual-port
Capacities	3.2 TB, 1.6 TB, 800 GB, 400 GB	6.4 TB, 3.2 TB, 1.6 TB, 800 GB	7.6 TB, 3.8 TB, 1.9 TB, 960 GB	15.3 TB, 7.6 TB, 3.8 TB	3.2 TB, 1.6 TB, 800 GB, 400 GB	15 TB, 7.6 TB, 3.8 TB, 1.9 TB, 960 GB
DWPD	10 DWPD	3 DWPD	1 DWPD	up to 0.8 DWPD	3 DWPD	1 DWPD
Sequential Read	2,200 MB/s	2,200 MB/s	2,200 MB/s	2,100 MB/s	2,100 MB/s	2,100 MB/s
Sequential Write	1,550 MB/s	1,550 MB/s	1,550 MB/s	1,550 MB/s	1,400 MB/s	1,200 MB/s
Random Read IOPS	230K	230K IOPS	230K IOPS	230K IOPS	240K IOPS	240K IOPS
Random Write IOPS	180K	120K IOPS	80K IOPS	50K IOPS	80K IOPS	55K IOPS
Years Warranty	5 Years	5 Years	5 Years	5 Years	5 Years	5 Years
User
Server virtualisation, OLTP databases, cache	✔	✔
Software-defined Store, tiering, all-flash arrays			✔	✔
Server virtualisation, OLTP databases, caching, tiering					✔	✔

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔

🔒 Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

  This description contains links to Amazon. These links will take you to some of the products mentioned in today’s video. As an Amazon Associate, I earn from qualifying purchases