Plex vs Jellyfin vs Emby? Which Should You Choose?

Which is the Best NAS Media Server Tool – Plex, Emby or Jellyfin

Although modern Network Attached Storage (NAS) devices can be used for a multitude of purposes, there has always been a large percentage of users who buy a NAS from the likes of Synology, QNAP, Asustor and Terramaster (or go full DiY/Open Source and opt for TrueNAS) in order to host their own multimedia server. If you have been out of the loop this last decade or so, then you might not be aware that the standard of media server software and ease of use has evolved incredibly and when it comes to NAS drive multimedia streaming, there are THREE big players in this arena – Plex, Jellyin and Emby. These three platforms (alongside many others, including tools such as Video Station from the NAS brands themselves) have allowed users who own DECADES of digital media (Movies, TV Shows, Music, Photos, eBooks, Comics, etc) to not only access them conveniently remotely from the comfort of their soft/hotel room/commuter train/beach – but also do so with the slick graphical user interface that you would often associate with premium streaming services such as Netflix and Hulu. This is done thanks to massive only databases (such as TheMovieDatabase and IMDb) that mean that your years of multimedia is scanned, sorted, and arranged into searchable titles. It then adds boxart, movie posters, cast lists, trailers, synopsis, trailers, extra content and more. Suddenly your dull breadcrumb ‘file/folder’ pile of media takes on an insane quality level and you have your very own personal Netflix – BUT CRUCIALLY YOU OWN ALL THE MEDIA!! That is the appeal of media server software like Jellyfin, Plex and Emby!

Although all three are quite similar on the face of it, all three have appealing design, interface, cost and customization choices that will almost certainly make one of them more suitable for you than the others! All three are supported by the bulk of modern NAS platforms, with via an available app in the brand’s official app center, available via a 3rd party app center (see QNAPClub or Synocommunity for example) or allow you to create a container within the NAS software and run from there, but there are definitely distinctions between all three that you might want to know before taking the plunge on your new multimedia server setup! So, today I want to go through all of the differences between Plex, Emby and Jellyfin media servers and, hopefully, by the end help you decide which is best for you!

Note – A huge thank you to Protektor-Desura for his time breaking down these services and his permission to use his data. You can find out more about his ongoing project HERE.

Plex vs Jellyfin vs Emby on a NAS – What have they ALL got in Common?

Before we go any further, it is worth highlighting the things there are supported by all three of these media server applications. It needs to be underlined that regardless of your specific requirements, Plex, Jellyfin and Emby are all EXCELLENT media server applications and alongside a massive range of client applications to watch/listen/read your multimedia on your devices, they have all grown into platforms that rival most paid subscription streaming services like Prime, Netflix, Disney+, etc. Here is a quick snapshot of all the things that Jellyfin, Emby and Plex have in common:

Now, there are a whole bunch of other things that Plex, Emby and Jellfin have in common (the above list would easily be 10x longer if I names them all), so I stuck with the most requested/sought-after features. But what about the things that they don’t have in common? Or those things that are locked behind a subscription/one-off-fee? Let’s begin with the first difference that many users consider the biggest hurdle – the cost of Plex, Emby and Jellyfin.

Plex vs Jellyfin vs Emby on a NAS – Pricing

Now, for many users, the idea that the media server software that they want to use on their NAS costing them MORE money is REALLY annoying! The whole point for many users making the switch AWAY from streaming services (Netflix, HBO Max, etc) is because they wanted to spend that money on the hardware to watch the media they own, as well as ensure that it’s not changed/removed from one money to the next. Now, unfortunately, this is only half the story! The fact is that media platforms such as Jellyfin, Plex and Emby have REAL PEOPLE working o them, as well as continued development (and that is not even factoring in security/stability/feature improvements in the software’s life) that all needs to be subsidized. The NAS brands DO NOT financially support them, the Streaming services actively avoid/discourage them and although users can always donate – the user vs donation ratio is obviously is painfully uneven. Therefore unless these platforms embrace advertisements and/or 3rd party sponsorship (which is a slippery slop for many), the more ambitious platforms need to find ways to fundraise their services in a way that doesn’t hurt casual/low-end users, but pushes the heavier users to support the service.

Here is how Plex, Jellyfin and Emby breakdown their costs:

So, IMMEDIATELY Jellyfin looks appealing, RIGHT? It’s totally free for the server application, client tools and (remember the chart above showing what all three support) has most of the same features as Plex and Emby. Although all three have free-to-use options, the ability to use ALL services and client tools is where the subscription services appear. Of the three, Emby works out the tiniest bit more expensive, but actually (when you work it out at the per-user vs cost) it is largely identical to Plex in costs. The main reason that Emby works out the most expensive technically is that although the Emby Premiere subscription is optional, some of the client applications (eg iOS, Android, FireTV, etc) require you to either have an existing Premiere subscription OR pay a one-off fee. Plex allows you to install the app for free on most platforms, but limits the range of supported services that you can use (eg, hardware transcoding, share watch, etc) without a Plex Pass subscription in place. Next, let’s dig deeper into those available features and services available in Emby, Jellyfin and Plex to see what is available, what differs and what is free/paid-for!

Plex vs Jellyfin vs Emby on a NAS – Features, Functions and Supported Formats

Now, as mentioned in the introduction, Emby, Plex and Jellyfin all support a whole bunch of services and features to help you enjoy a wide range of multimedia, in a wide range of formats and on a wide range of devices! But there is definitely some disparity when you dig deeper. Let’s go through the range of supported features of these three applications and see where they start to separate:

Now, Jellyfin is the most open of the three (cough because it’s pure Open Source), and as good as that sounds, it is worth remembering that this does come with a downfall in platform development when compared to the platforms that get user-subsidy via subscription. Jellyfin is the less visually modern of the three (for those that care) and also throws alot of information at you on the server side, whilst not guiding the user as much. This results in a slightly steeper learning curve vs Plex and Emby. Emby also suffers from this a little, but also does a slightly better job of guiding the user through the experience. The main difference here is regarding the extent of open source! Of the three, PLEX is the one that is the closest to ‘the establishment’, it has long since shrugged off it’s free ‘indie’ type image, as it is the closest in design, appearance and presentation to subscription services. This is not necessarily a bad thing, as this results in a premium level of support, development and updates, connections with existing services and just generally a much better-presented platform overall (server-side and client-side) that is more user-friendly and intuitive – exactly what you would expect from the more premium presented/priced package in 2023/2024. However, this also results in the platform being alot more rigid, restricting optional add-ons and packages that are typically ‘unofficial’ (i.e. ones that Plex do not add to the service themselves). Equally, that Development vs Subsidy balance results in ALOT of the more exciting features being locked/restricted behind a Plex Pass subscription. This is initially understandable (again, see previous paragraph about supporting good work), but many users bulk at the idea of paying for a service, when they already paid for their hardware and said software will occasionally intentionally limit that hardware utility behind the subscription. Both Emby and Plex are guilty of this. Let’s talk about Hardware Transcoding!

Plex vs Jellyfin vs Emby on a NAS – Hardware Transcoding

What is Transcoding? Transcoding (also referred to as encoding, decoding and converting in similar means) is when a file is changed in order to be better suited to the destination client device that it will be enjoyed on. Here are some examples of when you might need to take advantage of transcoding:

• You might own media in a specific compression (the technique used by the media industry to make cinema screen blockbusters into at-home watchable content, among other reasons), such as HEVC/H.265, but not have a licence to play it on your client device, a NAS that supports HEVC or have sufficient client-side hardware/permission locally to convert it
• You might own 4K versions of your multimedia, but you want to watch it on a mobile device where a 480p or 720p version is much, MUCH more client power/hardware efficient to watch
• You are on a limited internet/cellular connection (morning commute, hotel, coffee shop, etc) and need a compressed version of a media file streamed
• Your media might be in an unsupported format (a hugely overlooked factor in audio formats) such as mp4a, FLAC, ACC, etc and needs changing

Transcoding can be done in advance (offline transcoding) or as/when the file is being accessed (known as on-the-fly transcoding) and that later one requires your NAS/Media Server to have sufficient hardware to change the file quickly enough to keep up with organic natural playback (i.e. it takes less than a second to convert/transcode a second of media). Now, you can use software transcoding (i.e the NAS will use raw CPU/System power to change the file, which is less efficient and less effective) or you can use hardware transcoding, which uses specifically available NAS system hardware (graphics card or CPU integrated graphics) to do the job, which is MUCH faster and MUCH MORE efficient. Where Plex and Emby hit a wall is that both platforms have put hardware transcoding support in their premium subscription services Plex Pass and Emby Premiere. This effectively means that the media server software is charging you to use the hardware in your NAS. This upsets quite a few people. Now, in their defence, hardware transcoding does require the software to be adaptive to different graphical hardware, requires time/energy invested in optimizing the software to take advantage of the hardware the best it can and is technically a more specialized media service/function that is not used by everyone – so in a way it makes sense tha this would be one of the optional settings to use as a means to subsidize development in their platform. However, the fact that Hardware Transcoding is available for free in Jellyfin is one of the strongest benefits that users that need this service will observe when comparing Jellyfin, Plex and Emby.

Plex vs Jellyfin vs Emby on a NAS – Supported NAS Hardware & Software Server Platforms

Although Plex, Jellyfin and Emby are all supported on the bulk of NAS platforms, the actual installation of them on NAS devices (from brands such as Synology ,QNAP, WD, Asustor and Terramster) or Custom built NAS servers that run on TrueNAS Core, TrueNAS Scale or UnRAID is not as straight forward from one media server app to the other. Here is how the three media server applications compare with it comes to installing the server-side application for Emby, Plex and Jellyfin:

Straight away, you can see that the installation of Plex and Emby on..well..EVERYTHING is supported. Once again, that optional paid subscription model has evidently paid off! Not only is Jellyfin not available as a standalone installer on a large number of platform, but in some cases it can only be installed as a custom-built container application (requiring a container hypervisor such as Docker) and although this is not hugely difficult, it will be dependant on the end user to create it right, as well as the efficiency of the NAS hardware in question to run the container as efficiently as possible. Overall, when it comes to the installation of the server-side application for these three multimedia server applications, Plex and Emby are winning the race! However, this is just the client-side application (i.e the one running the media server on your NAS), what about the support of the client applications for all your devices? Let’s take a look.

Plex vs Jellyfin vs Emby on a NAS – Supported Client Apps & Player Devices

The success of your multimedia server is going to be based on the smoothness of how well your NAS runs the server slide Plex, Emby or Jellyfin application – but also HUGELY dependant on the quality and extent of how well it is supported on the devices that you plan on accessing and enjoying your multimedia (referred to as clients or client-tools). Although all three applications can be accessed via the majority of web browsers (Chrome, Safari, Edge, Mozilla, Opera, etc), the bulk of users want to access their media via their phones, laptops, Smart TVs and streaming boxes such as FireTV and Roku. The range of supported clients and the means/extent of their use is possibly one of the biggest areas of difference between Emby, Plex and Jellyfin that you will find! Here is how they compare:

So, let’s break this down a little. In the case of Jellyfin, the application continues to be largely free and available on the bulk of currently used client hardware platforms. I say ‘largely’, because in some cases Jellyfin is not available as a direct client application for those platforms. You will need to use 3rd pary tools/plugins on some client hardware, some apps are glorified browser tabs with a lite GUI on top and some need to have a small fee to maintain their existence on certain app centers. Emby on the other hand is available on more platforms than Jellyfin, however, a large number of those platforms require you to either have an existing Emby Premiere subscription in place in order to download/use them or need you to pay a fee at the app center in order to use them. Finally, we have Plex, which is the one that seems to be the most freely available client application, widely available native installer client app and has much fewer instances of app-payment requirements than Emby.

Now there IS the argument that Emby and Plex need to subsidize these apps being hosted on these app centers, as their continued appearance there and patches being developed over time needs funding. But I do think the availability and potential pricing of these tools is something that is not advertised enough and something that many users do not realize until AFTER they have invested a bunch of time setting up their respective Emby/Plex Media server on their NAS. Jellyfin is clearly the one that is trying to keep itself Free/Open-Source as much as possible, but that comes with limitations on how far they can stretch themselves and the ease of installation on client devices in some cases.

Plex vs Jellyfin vs Emby on a NAS – Conclusion

Choosing between a Jellyfin, Emby and Plex Media Server NAS for your massive multimedia collection is one that going to be about the extent you are going to use it! If you are looking to create a simple media server that is largely accessible everywhere, but has lots of users, is user-friendly on both the server/client side, won’t need all the bells and whistles of a higher-end media enthusiast and you are just looking for a pretty way to enjoy your existing media that compares with premium subscription services – GO FOR PLEX!

If you are looking for a moderately customizable and featured multimedia server that gives you a good balance of control, usability and hardware support, but where the pricing can be a lot more flexible/ad-hoc (i.e one off payment per client of $5) and want the slick GUI, but also the option to customize it and take advantage of a few community add-ons – GO FOR EMBY!

Finally, if you are much more of a multimedia enthusiast, have a wide range of different media formats (i.e Audio, Video, literature and more), want to be able to link a large number of other services/tool and want to take advantage of the full extent of your NAS hardware (but are prepared for a slightly higher learning curve) – GO FOR JELLYFIN!

In summary, here are the pros and cons of each:

If you are thinking of buying a NAS, please use the links below as it results in us at NASCompares receiving an affiliate fee from Amazon:

Need More Help Choosing the right NAS?

Choosing the right data storage solution for your needs can be very intimidating and it’s never too late to ask for help. With options ranging from NAS to DAS, Thunderbolt to SAS and connecting everything up so you can access all your lovely data at the touch of a button can be a lot simpler than you think. If you want some tips, guidance or help with everything from compatibility to suitability of a solution for you, why not drop me a message below and I will get back to you as soon as possible with what you should go for, its suitability and the best place to get it. This service is designed without profit in mind and in order to help you with your data storage needs, so I will try to answer your questions as soon as possible.

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔

Δ

🔒 Join Inner Circle

Get an alert every time something gets added to this specific article!

NOTIFY ME

Want to follow specific category? Also Read...PLEX Playback Error: Please chHow to Install Plex Media ServHow to Install Plex Media ServPLEX TEST FILES - Video Files Buying a NAS for Plex Media SeCan you guys help me get SonSynology DS Video and Video StPlex Job Losses - Should You BPlex Job Losses - Should You BHow to Install Plex on a Synol 📧 Subscribe

You can also follow specific search terms:

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

Your Name (required)

Your Country (required)

Your Email (required)

Subject

Estimated Budget

Storage in GB/TB Required (if NAS, DAS or SAN)

Use case environment (Business/Home)

Your Message (900 char. Or use Fast Track)

By clicking SEND you accept this Privacy Policy
Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
🔒Private Fast Track Message (1-24Hours)

Δ

TRY CHAT Terms and Conditions

If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  

 

Or support us by using our affiliate links on Amazon UK and Amazon US

    

 

Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕

 

Summary

Reviewer

Robbie

Review Date

2023-06-30

Reviewed Item

Plex vs Jellyfin vs Emby? Which is BEST?

Author Rating

5