Site icon NAS Compares

Seagate Ironwolf 525 vs WD Red SN700 NAS SSD Comparison

Comparing the WD Red SN700 vs Seagate Ironwolf 525 SSD – Which Should You Use in Your NAS?

Utilizing NVMe SSDs inside your Network Attached Storage (NAS) drive is the opulent and business-only option that it once was! Many new and existing users are looking at the performance benefits of populating dedicated available NVMe SSD bays on their NAS alongside a larger RAID array in order to use this small but high-performance area of media to bolster their entire storage system. Serving as a significantly more affordable option than fully populating your NAS completely with SSDs, it allows you to improve the speed of files being written to the NAS (write caching) and the responsiveness of the system to file requests and overall responsiveness (Read caching). Although the NVMe SSD market is heavily populated with options, Seagate and WD are keen to highlight their NAS targeting NVMe SSDs, the Ironwolf and Red SN700 respectively, as the perfect choice to populate the m.2 SSD bays on your NAS. Both of these SSDs were released in Autumn 2021 and although similarly built, are actually quite different in terms of price, capacity and flexibility of utilization. Today I want to take a close look at their official specifications, their architecture, perform some testing of my own and ultimately help you decide which one you should buy your NAS Drive in 2021/2022. Let’s begin.

It is worth remembering that the two SSDs in today’s comparison are m.2 NVMe in architecture and although PCIe Gen 4 is compatible with Gen 3 and old, they will not suitable for NAS drives with M.2 SATA connections. We have seen more modern NAS systems released in the last few years abandon m.2 SATA in favour of its PCIe counterpart, but both Seagate and WD both provide SATA alternatives in their Ironwolf and WD Red series. Examples of SATA SSDs for NAS can be found HERE on Amazon.

How do the Seagate Ironwolf 525 and WD Red SN700 SSD Compare on Specs?

Both WD and Seagate are well known for their wide ranges of hard drive and SSD media, as well as both being pioneers of NAS server focused SSDs for caching and flash storage. Although SSDs are all built to a similar ground-level architecture, they will often have their later development shifted in favour of a specific targetted use. This is not a big surprise and much like the cutlery in your kitchen draw, they might be similar but one tool is much better at some tasks than others – ever tried using a spreading butter with a meat-claver? Or stirring tea with a ladle? The Seagate Ironwolf 525 and WD Red SN700 SSD are NAS targetted and although the performance is good, the true stand out factor in this design is the durability of the drive. SSDs for use in NAS systems will in most cases be used for caching and that means a very frequent turnover (i.e. data wrote, updated, deleted, repeat) daily as the demands of client users and devices change. Both of these SSDs arrive with a high level of durability and workload rating, but the WD Red SN700 and Seagate Ironwolf 525 definitely have differing ideas of preliminary architecture and what that price tag is being spent on. Let’s look at the shared base-level SSD architecture of each SSD (available on every capacity):

Below Specifications are taken from official brand sources, data sheets and reputable sources (real-world tests we performed ourselves are a little lower in the article):

Specifications

Seagate IronWolf 525

Released September 2021

WD Red SN700

Released September 2021

Warranty 5yr + 3yr Rescue 5yr
MTBF/MTTF 1800000 1750000
PCIe Generation PCIe Gen 4×4 PCIe Gen 3×4
NVMe Rev NVMe 1.3 NVMe 1.3
NAND Kioxia BiCS 4 96L 3D TLC NAND Sandisk 3D TLC
Controller PS5016 SSD Controller WD NVMe Controller

As you might know, WD develops practically all of their SSDs ‘in-house’ and feature proprietary NVMe controllers, subsidiary company NAND (in this case Sandisk) and this allows them to be able to control availability and pricing in a way that most other SSD brands cannot. Seagate uses 3rd party controllers and NAND manufacturers for the most part in their ranges, but are still generally quite top tier providers. The release time difference between the WD Red SN700 and Seagate Ironwolf 525 makes an impressive difference here in terms of the hardware on offer on either SSD, with the more recently released Seagate Ironwolf 525 having notably superior connectivity, NAND quality and overall performance. The older WD Red SN700 SSD features 3years of forensic level data recovery services though (which caching NAS users might want to have in the event of ‘trapped data’ during write caching operations and a critical system failure/power-cut) which is very unique to the brand. However, overall the Seagate Ironwolf 525 has superior architecture here. Below is how the building blocks of the Seagate Ironwolf 525 and WD Red SN700 result in throughput, IOPS and Durability at each capacity tier (based on officially provided figures):

Model

Seagate IronWolf 525

Released September 2021

WD Red SN700

Released September 2021

240/250GB N/A WDS250G1R0C$55
Sequential Read (Max, MB/s), 128 KB N/A 3,100MB
Sequential Write (Max, MB/s), 128 KB N/A 1,600MB
480/500GB ZP500NM30002 – $99 WDS500G1R0C$79.99
Sequential Read (Max, MB/s), 128 KB 5000MB / 3400MB 3,430MB
Sequential Write (Max, MB/s), 128 KB 2500MB / 2500MB 2,600MB
960/1000GB ZP1000NM30002 – $179 WDS100G1R0C$152.99
Sequential Read (Max, MB/s), 128 KB 5000MB / 3400MB 3,430MB
Sequential Write (Max, MB/s), 128 KB 4400MB / 3200MB 3,000MB
1920/2000GB ZP2000NM30002 – $369 WDS200G1R0C$289.99
Sequential Read (Max, MB/s), 128 KB 5000MB / 3400MB 3,430MB
Sequential Write (Max, MB/s), 128 KB 4400MB / 3200MB 2,900MB
3840/4000GB N/A WDS400G1R0C$649.99
Sequential Read (Max, MB/s), 128 KB N/A 3,430MB
Sequential Write (Max, MB/s), 128 KB N/A 3,100MB
240/250GB N/A WDS250G1R0C$55
Random Read (Max, IOPS), 4 KB QD32 N/A 220K
Random Write (Max, IOPS), 4 KB QD32 N/A 180K
2480/500GB ZP500NM30002 – $99 WDS500G1R0C$79.99
Random Read (Max, IOPS), 4 KB QD32 420K / 420K 420K
Random Write (Max, IOPS), 4 KB QD32 630K / 550K 380K
960/1000GB ZP1000NM30002 – $179 WDS100G1R0C$152.99
Random Read (Max, IOPS), 4 KB QD32 760K / 640K 515K
Random Write (Max, IOPS), 4 KB QD32 700K / 565K 560K
1920/2000GB ZP2000NM30002 – $369 WDS200G1R0C$289.99
Random Read (Max, IOPS), 4 KB QD32 740K / 640K 480K
Random Write (Max, IOPS), 4 KB QD32 700K / 565K 540K
3840/4000GB N/A WDS400G1R0C$649.99
Random Read (Max, IOPS), 4 KB QD32 N/A 550K
Random Write (Max, IOPS), 4 KB QD32 N/A 520K
Heatsink Option No No
TBW Rating 700/1400/2800 3,430MB
DWPD Rating 0.7 DWPD 0.7-1.0 DWPD
Note – BLUE Text is the Seagate Ironwolf 525 on a PCIe Gen 3×4 Slot  

Overall, it should come as no surprise that the Seagate Ironwolf 525 SSD is the notable leader here in practically all official benchmarks over the slightly older WD Red SN700 SSD, thanks to that improved architecture. Most notably in write performance and IOPS in general, it had a clear lead even in the lowest available capacities. Of course, these are officially provided performance figures and represent maximums based on the highest available hardware at the time of release. Let’s take a look at how these two SSDs compare in our own tests.

How Did the WD Red SN700 and Seagate Ironwolf 525 SSD Compare in OUR Tests?

Moving away from the official performance stats provided by WD and Seagate, I wanted to see how the Seagate Ironwolf 525 and WD Red SN700 compared in my own tests. Testing of these two SSDs will be broken down into 3 main parts, a CrystalDisk Benchmark test, Atto Disk Benchmark Test and an AJA media test. In each test, the SSD was in the 2nd storage slot (i.e not the OS drive). Each test was conducted three times and the system was left for 1 minute between tests to allow the SSD time to stabilize. The specifications of the test machine are:

Test Machine:

CrystalDisk 1GB Test File – Read, Write, 70/30% Mixed and IOPS Performance

CrystalDisk is still highly regarded as one of the most reliable tools for measuring storage media performance. Though it does create somewhat high-end results that may not be truly indicative of your own real-world setup, it can be used to display maximum potential throughput and IOPs at each tier. The first test for the Seagate Ionwolf 510 and Seagate Ironwolf 525 was on a 1GB test file:

Overall Winner: The Seagate Ironwolf 525 Overall

CrystalDisk 4GB Test File – Read, Write, 70/30% Mixed and IOPS Performance

The next test was to perform the same parameters in CrystalDisk on the Seagate Ironwolf 525 and WD Red SN700, but this time with a 4GB test file (larger files may result in higher sequential performance, but lower comparative IOPS)

Overall Winner: The Seagate Ironwolf 525 Overall

ATTO DiskBenchmark 1GB Test File – Read, Write

Switching things up, I then moved testing the WD Red SN700 and Seagate Ironwolf 525 SSD over to ATTO disk benchmark. A far more detailed tool that spreads performance testing over different file and block sizes. I started with the smallest ‘full range’ test file of 1GB. Here is how each SSD compared:

Overall Winner: The Seagate Ironwolf 525 Overall

ATTO DiskBenchmark 4GB Test File – Read, Write

Sticking with ATTO DiskBenchmark, I then moved the testing of the Seagate Ironwolf 525 and WD Red SN700 onto a x16 bigger test file of 4GB. This would certainly shift where the peaks in performance would sit and hopefully produce a clearer disparity between these two SSDs:

Overall Winner: A Draw

AJA 1080i Media Test 1GB Test File – Read, Write

I then switched to AJA, a popular media testing tool for video formats. Most SSDs will suffer over-saturated Memory/DRAM/SDRAM as sustained large file tests go on. The 1GB file test of AJA on the Seagate Ironwolf 525 and WD Red SN700 is still a small enough value not to be a problem though and we chiefly focused on the disk playback/reads graph to see how they compared in peak performance and also throughout the transfer:

Seagate Ironwolf 525 SSD

WD Red SN700 SSD

Overall Winner: A Draw

AJA 1080i Media Test 16GB Test File – Read, Write

Then we used a much, MUCH heavier test in AJA of 16GB on the WD Red SN700 and Seagate Ironwolf 525 SSD. Unsurprisingly this can often overflow the SSD cache/memory on board and result in a dip in performance as the SSD bottlenecks internally. So, when conducting this test, we are looking at peak performance AND how long the SSD maintained that performance before a potential dip. Here is how these two SSD compared:

Overall Winner: The Seagate Ironwolf 525 Overall

 

Seagate Ironwolf 525 vs WD Red SN700 SSD – The Results

Both the Seagate Ironwolf 525 and the WD Red SN700 are great examples of NVMe SSDs that will be remarkably useful in your NAS. With both drives largely saturating a PCIe Gen 3×4 SSD connection, arriving with a high level of durability and Throughput+ IOP performance that will certainly see your hard drive storage pool improve in it’s transfers with clients, whichever one you choose is going to be a great fit. That said, it is impossible to ignore that the Seagate Ironwolf 525 is overall the better SSD choice in the majority of ways. With its support of PCIe 4 and PCIe 3, matching the same connectivity performance on the WD Red SN700, the Seagate Ironwolf pulls further ahead with higher IOPS performance and that inclusive forensic data recovery services included. That said, it is by no means a clean sweep by Seagate here, with the WD Red SN700 arriving in more capacities (adding a smaller 250GB and larger 4TB model to the series), as well as a better price point at every tier and the same/higher durability as the Seagate Ironwolf at all storage sizes. As mentioned, both of these SSDs are great examples of what users should look for in an SSD for their old/new NAS system in order to improve the performance of cheaper, larger but slower hard drives.

The Seagate Ironwolf 525 NVMe SSD Wins on:

  • Supports PCIe 4 and PCIe 3
  • Better Sustained Performance
  • Higher IOPS
  • Higher Write Performance on PCIe 3 and PCIe 4
  • Data Recovery Services included (3yrs)

The WD Red SN700 NVMe SSD Wins on:

  • Same or Higher Durability Across the Range
  • In house Development
  • Higher Read Performance on PCIe 3
  • Most NAS Drives are M.2 PCIe 3 Right Now

 

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       

       

      #RunWithIronWolf and #WDRedNAS . This unit was supplied by @seagate and @WesternDigitalCorporation .The review provided was free of bias and my own independent opinions

      Summary
      Review Date
      Reviewed Item
      Seagate Ironwolf 525 vs WD Red SN700 NAS SSD
      Author Rating
      5
      Exit mobile version