Why are my PS5 fans so loud?

How do I fix the loud fan on my PS5?

If you have upgraded your PS5 with NVMe SSD and have no heatsink used, then you will likely experience internal fans to work louder. This is because NVMe generate enormous amount of heat, almost like CPU around 75C.  Here are some heat sinks for ps5

TOP 3 Recommended PS5 Storage Expansion Compatible Heatsinks
ELUTENG M.2 2280 Heatsink, Double-Sided	MHQJRH M.2 2280 SSD heatsink	EZDIY-FAB M.2 SSD heatsink 2280
FIND HERE  USA – UK – EU	FIND HERE	FIND HERE

QIVYNSRY M.2 heatsink 2280 SSD Double-Sided Heat Sink

• Designed for desktop computers, but works with PS5
• Aluminum body, Anodic Oxidation Surface Treatment;
• with 10°C – 30°C cooling effect;
• Compatible with Singel/Double sided M.2 NVME NGFF SSD;
• Easy to install, and not damage the hard disk.

Includes:

• 1* EZ NVMe Heatsink-Silver
• 2* Thermal pads
• 5* Screws.
• 1* Installation guide.

SUPER BUDGET OPTION – Akuoly M.2 SSD Heatsink 4 Pack Aluminum Heatsink Cooler Cooling

• To Save Your Device from Fail Prematurely–Reduce the risk of hardware failure due to overheating. The gap of these Akuoly heatsinks between the larger fins increases the area of the board and thus provides for greater heat transfer
• Made of High Quality Aluminum–Made of high quality aluminum, great thermal conductivity. An aluminum heatsink is a passive heat exchanger that efficiently transfers heat through electronic signal or mechanical signal with device, thus keeping a regulation of the temperature of the device at an optimal level
• Suitable for Various Devices–Suitable for heating elements on Wi-Fi routers, M.2 SSD, AC adapters, chargers, high power amplifier transistor semiconductor devices and so on
• Cheerful 4 Pack Heatsink & Thermal Pads– 4 pieces x aluminum heatsink Cooling Fin (each 70mm x 22mm x 6mm), large surface area and great fins; with 4 pieces of double-sided thermal tape whose thermal conductivity: about 1.3 W / (m·K).

• Material: Aluminum
• Size: 70mm (L) x 22mm (W) x 6mm (H)
• Package: 4 Pack x Aluminum Heatsink Cooling Fins
• 4 Pieces Double-sides Thermal Tape whose thermal conductivity: about 1.3 W / (m·K).

SGTKJSJS M.2 Heatsink SSD Cooler for PCIE NVME

Excellent little kit. Comes with: A screwdriver, a cleaning and drying towelette(not needed if the m.2 is new and/or not dusty) and it has two dark blue(.5mm) for the bottom(U bracket) and two light blue(1mm) for the top(heatsink) for 2 m.2 drives. There is a protective film on BOTH sides of each of the thermal tape pieces. Remove BOTH piece of film of EACH of the thermal tape pieces and apply them. Once the thermal tape is on both sides(1 blue-bottom, 1 light blue-heatsink) place the bottom of your m.2 drive into the U bracket/bottom of the thermal unit. Next make sure that the top piece(heatsink) has the open spot for the screw for your motherboard facing the back to leave space to attach . Next line up the holes and gently drop the top heatsink in to the U bracket/bottom.

Package list

– M.2 SSD heatSink  X2

– Silicone thermal pad   X4

– Fixing screw  X8

– screwdriver  X1

EZDIY-FAB M.2 2280 SSD heatsink

Double-Sided Heat Sink, High-Performance SSD Cooler for PCIE NVME M.2 SSD or SATA M.2 SSD- Red or Black 

• Designed for desktop computers, but works inside PS5
• Aluminum material for best heat dissipation and maximum performance.
• Compatible with Singel/Double sided M.2 2280 SSDs.
• Easy to install.
• Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.

Includes:

• 1* EZ NVMe Heatsink-Silver
• 2* Thermal pads
• 5* Screws.
• 1* Installation guide.

MHQJRH M.2 2280 SSD heatsink – SINGLE SIDE SSD USE ONLY – VERY TIGHT FIT!!

Double-Sided Heat Sink, Matching Thermal Silicone pad for PCIE NVME M.2 SSD or SATA M.2 SSD 

• Designed for Compact M.2 NVMe SSD Installation
• Aluminum body, Anodic Oxidation Surface Treatment.
• Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C – 30°C cooling effect.
• Compatible with Singel/Double-sided M.2 2280 SSDs.
• Easy to install, and not damage the SSD
• Advancing Gene thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD label.

Includes:

• M.2 SSD heatSink X1
• Silicone thermal pad X3
• Fixing screw X6
• Screwdriver X1

Ice Cold Ineo M.2 heatsink 2280 SSD

Thermal Silicone pad for M.2 PCIE NVMe SSD 

• The NVMe heatsink are able to support the NVMe SSD type 70x20mm
• Please place the silicone cooling pad between the heatsink and the SSD to prevent damage to the SSD and protect the particles of the SSD, which can effectively extend the life of your SSD.
• Package including: 1 NVMe Aluminum heatsink, 2 silicone thermal pad, 1 user manual, 1 screw driver , 1 guarantee card, 1 screw
• Each product has strict tested before We sent it to you and offer 1 Year Limited Warranty, Life-time free technical support by ineo.

Includes:

• 1 NVMe Aluminum heatsink
• 2 silicone thermal pad
• 1 user manual
• 1 screw driver
• 1 1 screw

WARSHIP Pro M.2 2280 SSD Heatsink

PCIE NVME or SATA m2 2280 SSD Double-Sided Heat Sink – Black 

• Suports PCIE NVME M.2 2280 size SSD or SATA M2 2280 size SSD
• Aluminium alloy, silver plating , anodic oxidation surface treatment
• Easy to install, NO damage to the SSD.
• Aluminum alloy-Groove design with 10°C – 30°C cooling effect

Includes:

• HeatSink X2
• Big Silicone thermal pad X 2
• Small Silicone thermal pad X 10
• Screws X 6
• Screwdriver X1

Best Budget Choice – Nankui SSD Heatsink Surround – SINGLE SIDE SSD USE ONLY – VERY TIGHT FIT!!

NVMe Heatsink for m.2 2280 SSD,Double-Sided Cooling 

• Originally designed for desktop computers, This M.2 SSD heatsink compatible with all single sided Type.
• Simple Lock design, easy to install
• Double Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 7°C – 30°C cooling effect (Varies depending on the environments), Ensure the high-speed and long-lasting performance of SSD, continuous high-speed reading and writing and long-term game performance are still strong
• Main body material: Aluminum alloy, anodic oxidation surface treatment. Dimensions: 76.5*24.*12mm , Nano Silicon Grease Material Dimensions：70*20*T.4 ，Thermal conductivity：3W/m-k

Includes:

• M.2 SSD heatSink X1
• Silicone thermal pad X3
• No Screws – Clicks Shut

Compatible heatsink for Seagate Firecuda 530 SSD on PS5

Compatible heatsink for SN850 SSD on PS5

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤
			VISIT RETAILER ➤
			VISIT RETAILER ➤
			VISIT RETAILER ➤

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US