TS-873A RAM upgrade

RAM Updgrade for TS-873A

this video (https://www.youtube.com/watch?v=hyeZ_qcKF2I) is very helpfull for me.
I´m a beginner with QNAP and chose the TS-873A model.
Now I need help with the RAM upgrade.
What are the modules that should work with this model? 2x16GB and 2x32GB.
Thank you for your help!

 

We used these RAM sticks in our tests :

Crucial 16GB 2666Mhz DDR4 SODIMM Non-ECC CT16G4SFD8266

Kingston 32GB 2666Mhz DDR4 SODIMM Non-ECC KCP426SD8/32 

 

Official list:

RAM-16GDR4ECT0-SO-2666
RAM-16GDR4ECT0-SO-2666
DDR type: DDR4(260PIN)

Capacity: 16GB

Spec: 1G X 8

Frequency: DDR4-2666

Form(PIN): 260PIN

with ECC Supported: ECC

Power Supply: 1.2V

Dram Organization: 2048M*72

Temperature: 0℃~85℃

Environmental Regulation: RoHS

RAM-16GDR4T0-SO-2666
RAM-16GDR4T0-SO-2666
DDR type: DDR4(260PIN)

Capacity: 16GB

Spec: 1G X 8

Frequency: DDR4-2666

Form(PIN): 260PIN

Power Supply: 1.2V

Dram Organization: 1024M*64

Temperature: 0℃~85℃

Environmental Regulation: RoHS

RAM-32GDR4ECP0-SO-2666
RAM-32GDR4ECP0-SO-2666
DDR type: DDR4(260PIN)

Capacity: 32GB

Spec: 2G X 8

Frequency: DDR4-2666

Form(PIN): 260PIN

with ECC Supported: ECC

Power Supply: 1.2V

Dram Organization: 4G*72

Temperature: 0℃~85℃

Environmental Regulation: Halogen Free

RAM-32GDR4T0-SO-2666
RAM-32GDR4T0-SO-2666
DDR type: DDR4(260PIN)

Capacity: 32GB

Spec: 2G X 8

Frequency: DDR4-2666

Form(PIN): 260PIN

Power Supply: 1.2V

Dram Organization: 4G*64

Temperature: 0℃~85℃

Environmental Regulation: RoHS

RAM-4GDR4T1-SO-2666
RAM-4GDR4T1-SO-2666
DDR type: DDR4(260PIN)

Capacity: 4GB

Spec: 512M X 8

Frequency: TS512MSH64V6H

Form(PIN): DDR4-2666

with ECC Supported: 260PIN

Dram Organization: 1.2V

Temperature: 512M*64

RAM-8GDR4ECT0-SO-2666
RAM-8GDR4ECT0-SO-2666
DDR type: DDR4(260PIN)

Capacity: 8GB

Spec: 1G X 8

Frequency: DDR4-2666

Form(PIN): 260PIN

with ECC Supported: ECC

Power Supply: 1.2V

Dram Organization: 1024M*72

Temperature: 0℃~85℃

Environmental Regulation: RoHS

RAM-8GDR4T0-SO-2666
RAM-8GDR4T0-SO-2666
DDR type: DDR4(260PIN)

Capacity: 8GB

Spec: 1G X 8

Frequency: DDR4-2666

Form(PIN): 260PIN

Power Supply: 1.2V

Dram Organization: 1024M*64

Temperature: 0℃~85℃

Environmental Regulation: RoHS

Potential alternative for 32GB ECC RAM – not tested

Samsung 32GB DDR4 PC4-21300 2666Mhz 260-pin SODIMM ECC Unbuffered Memory RAM

 



If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!

10 thoughts on “TS-873A RAM upgrade

  1. Nice video, good info.
    Would you also have a link to something called “Everything you need to know about Upgrading NAS Memory” but …for QNAP? The video talks about QNAP but the link points to a page where Synology Memory Upgrades are explained…:-(
    REPLY ON YOUTUBE

  2. I have a QNAP 673a QUTS Hero and Raid 5 ZFS. At the moment there is Crucial 2x16GB SO-Dimm installed. Would you recommend to upgrade to 64GB just to be on teh safe side for future usage? – I assume DDR So-Dimm will phase out slowly too.
    REPLY ON YOUTUBE

  3. I have TS-664, which is a newer QNAP model. I initially updated with 2 stick of KRV26S19S6/8 (8GB DDR4 2666 from Kingston). They work perfectly for 6 months but now under heavy ram usage QNAP started to crash (turn off) and would not pass Power-On Self-Test. If I remove 1 stick and run memtest86, it would not detect any error. Should I buy 1 unit of 16GB to upgrade instead?
    REPLY ON YOUTUBE

  4. I checked QNAP’s website and it lists ECC memory as supported on the specifications page. Not sure if that was mentioned or added later but it seems like this is a great setup
    REPLY ON YOUTUBE

  5. That was a complete wate of time. No info on the ECC. Useless tests. No proof that ECC really is enabled. There must be some tool in the linux layer that can show this (e.g. dmidecode). Showing VMs RAM is no proof of anything. Could be handled as balloon device of the VM-layer. This is a complete shit-show!
    REPLY ON YOUTUBE