Add Annke i91bf POE to Synology Surveillance station

Last updated on 13 Jun 2022 📧 Subscribe

Add Annke i91bf POE to Synology Surveillance station

 

  1. Connect via POE/injector/ LAN
  2. Get IP address of the camera
  3. enable ONVIF (Network/Advanced settings/Integration Protocol/ Enable
  4. add ONVIF user
  5. Open Synology Admin panel/ Open (Install) Surveillance Station
  6. Open IP Camera app / Click add
  7. Select a camera and click Next
  8. Click authenticate and add credentials

 

 

You can download any IP scanner app to find out your camera’s IP. You can then open your internet browser and type in the IP address which will open the camera Admin panel.

 

 

 


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!