Synology DS723+ compatible RAM upgrade

Synology DS723+ compatible RAM upgrade

Official Synology memory upgrades

SODIMM

• DDR4 ECC Unbuffered SODIMM
• EAN: 4711174724383
• Capacity: 4GB

• DDR4 ECC Unbuffered SODIMM
• EAN: 4711174724390
• Capacity: 8GB

• DDR4 ECC Unbuffered SODIMM
• EAN: 4711174724406
• Capacity: 16GB

CHECK THIS PAGE BELOW:

Synology NAS compatible RAM

Our tests in studio:

Here are NAS community tests :

ECC MEMORY

Kingston Server Premier 16GB 2666MT/s DDR4 ECC CL19 SODIMM 2Rx8 Server Memory Hynix D – KSM26SED8/16HD – CHECK AMAZON 

Arch Memory https://archmemory.com/16gb-am-d4es01-16g-260-pin-ddr4-2666mhz-ecc-so-dimm-ram-memory-for-synology/

Samsung sticks

Samsung M471A2K43CB1    UK   USA

Crucial RAM alternatives:

Crucial 4GB DDR4-2666 SODIMM         UK     USA  
CT4G4SFS8266
Configuration ID: CT12553660
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 512Meg x 64 •

Crucial 8GB DDR4-2666 SODIMM         UK     USA  
CT8G4SFS8266
Configuration ID: CT12529382
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 1024Meg x 64 •

16GB CT16G4SFD8266.    UK     USA  

Crucial CT16G4SFD8266 16 GB (DDR4, 2666 MT/s, PC4-21300, Dual Rank x8, SODIMM, 260-Pin) 

Crucial 16GB DDR4-2666 SODIMM         UK     USA  
CT16G4SFD8266
Configuration ID: CT12529368
DDR4 PC4-21300 • CL=19 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 2048Meg x 64 •

Optional Synology memory modules are designed to expand the memory of your Synology NAS. Follow the steps below to install, check, or remove a memory module on your Synology NAS. The following table shows the memory configuration for best practice:

To remove the memory module

1. Shut down your Synology NAS. Disconnect all cables from your Synology NAS to prevent possible damage.

2. Remove the drive trays from the drive bays. The memory slots are located on the inner-right side of your Synology NAS. You will find a memory module that is pre-installed.

3. The memory slots are numbered as shown below.

4. Push the levers on both sides of the memory module outward. The memory module will be released from its slot.

5. Hold the memory module by its edges and remove it from the slot.

6. Insert the drive trays back into the drive bays.

7. Reconnect the cables removed in step 1, then press the power button to turn on your Synology NAS.

To install the memory module

1. Follow step 1 to 2 of the “To remove the memory module” section to shut down your Synology NAS, disconnect the cables and remove the drive trays.

2. Insert the new memory module into the empty slot:

a. Align the small gap between the gold connectors of the memory module with the notch on the empty slot. Insert the memory module into the slot. Make sure that the module is properly inserted.

b. Gently push down the memory module until you hear a click.

3. Insert the drive trays back into the drive bays.

4. Reconnect the cables removed in step 1, then press the power button to turn on your Synology NAS.

To make sure your Synology NAS recognizes the new memory capacity

1. Install DiskStation Manager (DSM). Please see “Install DSM on Synology NAS” for more information.

2. Sign in to DSM as admin or a user belonging to the administrators group.

3. Go to Control Panel > Info Center and check Total Physical Memory.

If your Synology NAS does not recognize the memory or does not start up successfully, please make sure that the memory module is installed correctly.