Site icon NAS Compares

Synology DS1621+ Power Consumption Test – How Much Does it Cost in Electricity?

How Much Electricity Does A Synology DS1621+ NAS Use and How Much Does it Cost to run 24×7?

“The Bigger the NAS, the BIGGER the electricity bill!” – THAT was what a fellow visitor of a trade show I attended back in 2019 said to me as I waxed lyrical about the hardware of a new Xeon Powered Synology solution that was being previewed at the time. I have never really forgotten about that. Not only because (at least, at the time) I thought that it was rather cynical, but also because, sadly, he was absolutely correct. As different NAS servers arrive, with bigger and better CPUs, greater and great bay numbers and larger and larger chassis – the more power they will end up consuming when in operation 24×7. Even in Standby/Idle, they are still acting away at your mains powers and ultimately adding small 0.0001s to your energy bill. Right now, in this energy-aware climate, it can be appreciated that a NAS drive (a 24×7 appliance) seemingly has its cost to the end user in terms of electricity as something of a vague number. With so many kinds of NAS available in the market, featuring a mix of CPUs, PSUs, Bays and utilities, PLUS the wide range of HDD/SSD drives in the market to choose from – there are just so many variables when trying to work out how much power your NAS drive is using and how much that is translating to in your monthly energy bill! So, today’s article is about working out how much electricity the popular Synology DS1621+ NAS and four WD Ultrastar 10TB HDDs will consume, as well as how much that equals to you in £, $ or € per day, month and year! We tested the popular 2020 generation desktop 6-Bay NAS system, connected them to an energy monitor and worked out how much power they used in full active use and in idle. Let’s begin.

The Synology DS1621+ NAS
Current Price/Availability on Amazon –$999+
The WD Ultrastar 10TB HDD (x5)
Current Price/Availability on Amazon –$259
AMD Ryzen V1500B CPU, 4-Core 2.2hz Celeron CPU
4GB 2400Mhz ECC Memory, 1GbE
10 Terabyte Capacity – SATA 3.5″ Form Factor
7200RPM – 256MB Cache – 6x Platters

NAS Power Use Test Setup

Choosing the appropriate NAS drive for these tests was always going to be tough. I DO intend on repeating these tests with several different NAS drives after this in some follow-up articles (the larger article that I will be adding to can be found HERE), but wanted these first few tests to be focused on one of the most POPULAR NAS setups (and the DS1621+ is still one of the most popular Synology NAS the brand has ever produced and the WD Ultrastar 10TB HDD has been popular for around a 4 years), as well as identifying the difference between using newer gen CPUs and Larger drives vs using older generation devices and smaller capacity media. This will involve 2x tests on each NAS+Media configuration. Here is a breakdown of the hardware configurations and test architectures:

The initial 24 hours (used for system initialization and RAID configuration) were NOT included in the power usage monitoring, as although they appear on the graph they are one-off single-event scenarios. Each test (Active vs Idle) was conducted for 24hrs and the overall electricity usage was displayed in kw (kilowatt). But what is the difference between Active and Idle activity? Why does it matter?

What is the Difference Between a NAS Drive ‘Active’ and in ‘IDLE / Standby’?

Although a NAS is designed to be in operation 24×7 and is consuming electricity when running, the actual reality of this and the extent to which it is consuming it is actually alot more nuanced. Most home users who have a NAS system will use the NAS directly for a significant;y smaller portion of time per day than it is actually powered on for. Perhaps to stream a movie or a couple of TV episodes, run a daily backup, have a couple of cameras in/outside their home that are sending recordings (or more likely just alerts and associated captures) to the NAS and that is about it. They will periodically do more than these, maybe a VM, more sophisticated backup or use some of the other services ad hoc, but the result is that in most domestic/bog standard home scenarios, a NAS will be switched internally to Idle/Standby after no pro-active use quite quickly and spend 80-90% of the time in low power modes. Business users might well be using the system 24×7 for sync’d tasks and on-going camera recording, but even then, this will be a lower %  of system resources in use. So, in order to find a comparable and relative means to study the electricity use of a NAS and it’s cost, I have conducted two tests per NAS+HDD configuration. The first, a 24 Hour Active test, with the system using a decent % of it’s CPU+Memory, a swell as the HDDs not being given the chance to switch to Idle/Standy (by constantly writing AND performing S.M.A.R.T tests hourly). The idle tests involve all of those apps, services and scheduled operations being cancelled and the network cable being disconnected from the NAS (for another 24hrs). From here we can work out the cost of an hour of power usage by either setup in high activity and near-zero activity. But how can we work out the COST of the electricity used by the NAS in that time period?

How Energy Costs in these NAS Tests were Calculated?

The results of the energy usage are then cross-referenced by ‘sust-it.net’ and calculations of the cost of the used electricity per day, month and year was calculated for the UK, U.S, Germany, Australia and Canada. Now, using a select energy tariff is much harder, as there are quite literally thousands of different energy providers globally, each with their own pricing on the cost of energy per ‘kWh’. So, I used the national average calculations that were provided by ‘sust-it’ for each of those areas. Some are clearly more up-to-date than others (i.e the United Kingdom Avg Energy cost tariff is dated October 2022, whereas the Canada’s average energy cost is from way back in March 2020), however, these will still provide a good basis for understanding what a NAS drive is going to cost you in electricity when it is in operation. The national tariff averages used in this article for each region are as follows:

UK: Energy Price (October 2022) electricity rate of 34.00 pence per kWh.

USA: Average (Feb 2022) electricity rate of 14.80 cents per kWh.

Germany: Average (June 2021) electricity rate of 31.93 Eurocents per kWh.

Australia: Average (March 2022) electricity rate of 23.59 cents per kWh.

Canada: Average (2020) electricity rate of 8.50 cents per kWh.

Source – https://www.sust-it.net

There are the rates that we will be using to calculate the running costs of the Synology NAS system (and more importantly its Drive setup and CPU usage).

Test – Synology DS1621+ NAS and 5x WD Ultrastar 10TB Drives

I set the Synology DS1621+ NAS and WD Ultrastar 4TB Hard drives up in the following configuration for the Active tests:

Then, 24hrs later, I disabled all these processes, disconnected the RJ45 LAN and let the NAS fall into idle/standby mode. The results were as follows:

The 0.80kW that was used in the initialization of both the NAS and the drives in the RAID was NOT included in the respective Actie/Idle tests.

Synology DS1621+ and WD Ultrastar 10TB HDD Test Results:

0.0479kW use per hour active and 0.0266kW use per hour idle = 

1hr Active Use (KW) UK Power Use £ U.S Power Use $ Germany Power Use € Australia AU$ Canada CA$
Per Hour 0.016 0.007 0.015 0.011 0.004
           
1hr Idle Use (KW) UK Power Use U.S Power Use Germany Power Use Australia Canada
Per Hour £0.01 0.003 0.008 0.006 0.002

1.15KW over 24 hours Active = 

24hr Active Use (KW) UK Power Use £ U.S Power Use $ Germany Power Use € Australia AU$ Canada CA$
Cost Per Day £0.38 0.168 0.36 0.264 0.096
Cost per Month 11.68 5.11 10.95 8.03 2.92
Cost Per Year 140.16 61.32 131.4 96.36 35.04

0.64KW over 24 hours idle = 

24hr Idle Use (KW) UK Power Use £ U.S Power Use $ Germany Power Use € Australia AU$ Canada CA$
Cost Per Day £0.22 0.072 0.192 0.144 0.048
Cost per Month 6.57 2.19 5.84 4.38 1.46
Cost Per Year 78.84 26.28 70.08 52.56 17.52

So, what about if you were to only use the NAS at active use for around 25% of the day (i.e 6hrs of active with backups, multimedia, etc) and 75% of the day as idle (i.e 18hrs unused):

25%/75% Active/Idle Use:

6hr Active Use / 18hr Idle UK Power Use £ U.S Power Use $ Germany Power Use € Australia AU$ Canada CA$
Cost Per Day £0.26 0.096 0.234 0.174 0.06
Cost per Month 7.8475 2.92 7.1175 5.2925 1.825
Cost Per Year 94.17 35.04 85.41 63.51 21.9

Now it is worth keeping in mind that the costs for each region have a notably different price per kW rate, so even after factoring in currency conversions between different units (eg Pounds vs Dollars), there is a significant degree of difference in the costs per day, month and year of the exact same NAS+HDD setup above. Stay tuned, check below to see if other NAS power tests have been published and recommended to you, or watch the video version of these tests (which goes into more detail on the current predicaments in the energy crisis facing many of us in 2022, 2023 and beyond.

 

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       
      Exit mobile version