TS-h3088XU-RP now official

Last updated on 24 Nov 2020 📧 Subscribe

TS-h3088XU-RP now official

 

TS-h3088XU-RP-W1270-64G

TS-h3088XU-RP-W1250-32G

 

processor Intel® Xeon® W-1270 8-core 3.4 GHz processor (boost up to 5.0 GHz)
Processor architecture 64-bit x86
Floating point arithmetic
Encryption engine  (AES-NI)
Hardware acceleration
System memory 64 GB UDIMM DDR4 ECC (4 x 16 GB)
Maximum memory 128 GB (4 x 32 GB)
Memory slot 4 Long-DIMM DDR4
For dual-DIMM configurations, you must use a pair of identical DDR4 modules.
Flash memory 5 GB (Dual boot operating system protection)
Number of hard drive slots Front: 24 x 2.5-inch SATA 6Gb/s, 3Gb/s
Rear: 6 x 2.5-inch SATA 6Gb/s, 3Gb/s
The hard disk is not included in the system shipment.
For a hard drive compatibility list, please visit https://www.qnap.com/compatibility/
Support hard drive type 2.5-inch bays:
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot plug support
SSD cache acceleration support
Gigabit Ethernet port (RJ45) 1 (for remote management)
2.5 Gigabit Ethernet port (2.5G/1G/100M) 4
5 Gigabit Ethernet port (5G/2.5G/1G/100M) Optional via an adapter
10 Gigabit Ethernet port Optional via an adapter
25 Gigabit Ethernet Port 2
Jumbo Frame
PCIe expansion slot 3
Slot 1: PCIe Gen3 x8 or x4
Slot 2: PCIe Gen3 x4
Slot 3: PCIe Gen3 x4
*Slot 1 is preinstalled with a 25GbE network adapter. Please reserve this slot for the 25GbE adapter for the best performance.
**Slot 1 provides the width of PCIe Gen3 x8 when Slot 2 is not in use, and provides the width of PCIe Gen3 x4 when Slot 2 is in use.
USB 3.2 Gen 2 (10Gbps) port 2 x Type-C
2 x Type-A
HDMI output 1, HDMI 1.4b (up to 4096 x 2160 @ 30Hz)
model Rack
LED indicator Hard disk, status, 10 GbE, network, storage expansion port status
Button Power, system reset
Dimensions (height x width x depth) 88.3 × 481.07 × 515.02 mm
Weight (net weight) 12.26 kg
Weight (gross weight) 17.87 kg
Operating temperature 0-40°C (32°F-104°F)
Relative humidity 5~95% RH (non-condensing), wet bulb: 27˚C (80.6˚F)
Power Supplier 550W (x2), 100-240V
Power consumption: hard drive sleep mode 129.57 W
Power consumption: operating mode, typical 261.81 W
Tested with drives fully populated.
fan 3 x 60mm, 12VDC
Noise value 53 db(A)
System alert buzzer


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!