DVA1622 specs released

Last updated on 18 May 2022 📧 Subscribe

DVA1622 specs released

model DVA1622 DVA3221
processor Processor model Intel Celeron J4125 Intel Atom C3538
processor architecture 64-bit 64-bit
processor clock 4-core 2.0 burst up to 2.7 GHz Quad Core 2.1 GHz
Hardware Encryption Engine (AES-NI)
GPU GPU model Intel UHD Graphics 600 NVIDIA GeForce GTX 1650
Remark – Display output is not supported.
Memory system memory 6 GB DDR4 non-ECC 8 GB DDR4
Pre-installed memory modules 6 GB (2 GB + 4 GB) 8 GB (4 GB x 2)
Total number of memory slots – 2
Maximum memory capacity – 32GB (16GB x 2)
Remark Synology reserves the right to replace memory components with the same or higher frequency depending on the supplier’s product availability. Its compatibility and stability have been tested by the same strict test, please rest assured to use.
  • Please purchase Synology original memory modules for the best compatibility and reliability. Synology will not be able to provide full product warranty or technical support if the memory capacity is not expanded using Synology memory modules.
  • Synology reserves the right to replace memory components with the same or higher frequency depending on the supplier’s product availability. Its compatibility and stability have been tested by the same strict test, please rest assured to use.
storage device number of disk slots 2 4
Maximum number of disk slots to install expansion units – 14 (DX517 x 2)
Compatible Disk Types* (See All Supported Disks) 3.5″ SATA HDD
  • 3.5″ SATA HDD
  • 2.5″ SATA HDD
  • 2.5″ SATA SSD
Disk hot-plug support
Remark Compatible disk type refers to the hard disk type confirmed to be compatible with the product after actual measurement, not the maximum speed limit of the hard disk slot.
External port RJ-45 1GbE port 1 4 (Support Link Aggregation / Failover)
USB 3.0 port 2 3
eSATA port – 2
COM Port – 1
Image output Image output HDMI X 1 –
Supported resolution 1080p 60Hz –
Exterior Size (HXWXD) 166mm x 106mm x 223mm 166mm x 250mm x 237mm
weight 1.51 kg 4.92 kg
other projects wake on lan
system fan 92mm x 92mm x 1pcs 120mm x 120mm x 1pcs
fan mode
  • low temperature mode
  • silent mode
  • full speed mode
  • low temperature mode
  • silent mode
  • full speed mode
Power auto-recovery
Noise value* 18.4 dB(A) 28.3 dB(A)
Timer switch
Power Supply / Transformer 60W 250W
AC input voltage 100 V to 240 V AC 100 V to 240 V AC
Current frequency 50/60 Hz, single frequency 50/60 Hz, single frequency
Power consumption power* 19.93 W (Access)
4.02 W (HDD Hibernation)		 43.92 W (Access)
28.43 W (HDD Hibernation)
British thermal unit 67.96 BTU/hr (Access)
13.71 BTU/hr (Hard Disk Sleep)		 149.86 BTU/hr (Access)
97.01 BTU/hr (HDD Hibernation)
Remark
  • For more information on how to measure power drawn by a power supply, please refer to this article .
  • Noise value test environment: Seagate 2TB ST2000VN000 hard drive in standby mode, with two GRAS Type 40AE microphones installed at a distance of 1 meter from the front and rear of the Synology NAS; background noise value: 16.49-17.51 ​​dB(A); temperature: Celsius 24.25-25.75 degrees; humidity: 58.2-61.8%.
temperature operating temperature 0°C to 40°C (32°F to 104°F) 0°C to 40°C (32°F to 104°F)
Storage temperature -20°C to 60°C (-5°F to 140°F) -20°C to 60°C (-5°F to 140°F)
Relative humidity 5% to 95% RH 5% to 95% RH
Certification body
  • FCC
  • CE
  • BSMI
  • VCCI
  • RCM
  • UKCA
  • EAC
  • KC
  • FCC
  • CE
  • BSMI
  • VCCI
  • RCM
  • EAC
  • KC
Warranty 3 years 3 years
Remark The warranty period begins on the date of purchase stated on the purchase receipt. (see more)
environment RoHS Compliant RoHS Compliant
package contents
  • Host X 1
  • Accessory Pack X 1
  • Transformer X 1
  • Power cord X 1
  • RJ-45 network cable X 1
  • Quick Installation Guide X 1
  • Host X 1
  • Accessory Pack X 1
  • Power cord X 1
  • RJ-45 network line X 2
  • Quick Installation Guide X 1
optional accessories
  • 3.5″ SATA HDD: HAT5300
  • VisualStation: VS360HD
  • Surveillance Device Authorization
  • DDR4 ECC SODIMM: D4ECSO-2666-16G
  • Expansion unit: DX517
  • 3.5″ SATA HDD: HAT5300
  • 2.5″ SATA SSD: SAT5210
  • VisualStation: VS360HD
  • Surveillance Device Authorization
Remark – To install an additional ECC memory module, be sure to remove the original non-ECC memory first. For more information, see here .
Download Center and Compatibility
level category brand series model firmware capacity characteristic Precautions
Enterprise 3.5″ SATA HDD Synology HAT5300 HAT5300-16T 1401 16TB
Enterprise 3.5″ SATA HDD Synology HAT5300 HAT5300-12T 1401 12TB
Enterprise 3.5″ SATA HDD Synology HAT5300 HAT5300-8T 1401 8TB
Enterprise 3.5″ SATA HDD Synology HAT5300 HAT5300-4T 1401 4TB
Enterprise 3.5″ SATA HDD Synology HAT5300 HAT5300-4T 1402 4TB


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!