GeForce GTX1050 ti GPU on a Qnap

Last updated on 25 Sep 2018 📧 Subscribe

My Graphics Card and HD Station

I was looking everywhere for an answer to my Issue. I have a QNAP TVS-682 upgraded to 40GB RAM and intel i7-6700K and proper cooler. I recently purchased a GeForce GTX1050 ti 4GB and installed it with the driver from QNAP App-Store. on the Graphics Card Tap within the Hardware (Settings page) it shows the Graphics card but no Information on the temperature, ram used, or fan speed (when assigned to VS. But, we assigned to Container Station the information appears. Did many restarts and driver re-installation the issue remained.

The other issue (and am not sure if this is possible), how can I use it for the HD Station (directly connect the HDMI Cable to the TV from the GPU) within having to use the HD port on the NAS itself.

With a dedicated graphics card, you can choose rather GPU is added for virtualization or for HD station. You should be able to use this port then to play videos directly to your TV over HDMI 2.0 .

In the virtual station, there might be a chance that the driver does not work properly.

You can always send me a screenshot of the settings you see. This should help to investigate further.

Where to Buy a Product
			VISIT RETAILER ➤
			VISIT RETAILER ➤
			VISIT RETAILER ➤
			VISIT RETAILER ➤

If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE

☕ WE LOVE COFFEE ☕