High Availability (active-active dual controller) Expansion TL-R1620Sdc

Last updated on 21 May 2021 📧 Subscribe

High-availability dual-controller, supporting SAS 12Gb/s storage expansion solution for high-capacity daisy chain connection – TL-R1620Sdc

  • With the PCIe SAS interface card, the dual-controller NAS storage space can be expanded flexibly and economically, adding PB-level huge storage space.

  • Mini-SAS dual-channel redundant design and dual redundant power protection ensure the stable operation of the system.

  • QNAP dual-controller NAS will automatically detect the connection status of the expansion device, and the disconnection protection mode can prevent data corruption.

  • Supports Broadcom® SAS DataBolt™ line bandwidth optimization, and combines every 2 sets of 6Gb/s transmission into a single 12Gb/s data stream to achieve the high-speed transmission performance of SAS 12Gb/s.

  • QNAP NAS can flexibly manage the connected TL-R1620Sdc storage space through the Storage Manager.

  • The short chassis design can be easily installed in most small media cabinets or cabinets with a large number of lines, and the space saved can be reserved for line configuration or heat dissipation.

 

QNAP NAS model Dual-controller NAS (equipped with QES operating system)
The highest quantity that can be connected to TL-R1620Sdc 7
A single storage pool supports the maximum number of RAID groups 128
Maximum storage pool capacity 1 PB
A single dual-controller NAS supports the maximum number of storage pools 128
Maximum capacity of flexible volume 1 PB
iSCSI LUN maximum capacity 1 PB

 

TL-R1620Sdc

Number of hard drive slots 16 3.5-inch SAS 12Gb/s, SAS/SATA 6Gb/s
The hard disk is not included in the system shipment.
For a hard drive compatibility list, please visit https://www.qnap.com/compatibility/
Support hard disk type 3.5-inch slot:
3.5-inch SAS hard drive
2.5-inch SAS hard drive
2.5-inch SAS solid state drive
Hot plug support
Gigabit Ethernet port (RJ45) 1
For console access and CLI.
Form factor 3U rack mount
Host interface 3 x 12Gb/s SAS 3.0 wide ports (4-wide port) Mini-SAS HD (SFF-8644) for each controller
LED indicator HDD 1-16, Status, Power, Fan, Temperature, SAS connector status
Button Power, OLED
Dimensions (height x width x depth) 131.3 × 482.2 × 425.3 mm
Maximum number of supported hard drives/solid state drives 16
Hard Disk Type 3.5″ or 2.5″ SAS12Gb/s 6Gb/s drives
Operating temperature 0-40 °C (32°F-104°F)
Storage temperature -20-70°C (-4°F-158°F)
Relative humidity 5-95% RH (non-condensing), wet bulb: 27˚C (80.6˚F)
Power Supplier 550W (x2), 100-240V
fan 3 x 80mm, 12VDC
System alert buzzer
management Managed via NAS QES OS and JBOD Manager for Windows

 

 


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!