How to create a new storage space volume on WSS NAS

How to create a new storage space volume on WSS NAS

Step 1: Creating a Storage Pool
Create a Storage Pool from SATA, USM, or USB Drives:

1. Make sure all physical disks needed for the pool are installed.
2. Go to Server Manager > File and Storage Services > Volumes > Storage Pools.
3. Right-click in the window and select “New Storage Pool”.

4. Click “Next”.
5. Type a name and description.
6. Choose the NAS.
7. Click “Next”.
8. Check the disks you want for the Pool.
9. Choose whether you want the drive to be automatically configured or designate it as a Hot Spare (to immediately replace a failed drive).
10. Click “Next”.
11. Select “Create”.
12. Your new Storage Pool should show in Server Manager.

Step 2: Create a Storage Space
Create a Storage Space (Virtual Drive) Using the Storage Pool:

1. Right-click on the Storage Pool you would like to use for the Virtual Disk and select New Virtual Disk.
2. Click “Next”.
3. Select the Storage Pool and click “Next”.

4. Type in a Name for the Volume and a Description.
5. Click “Next”.
6. Choose the Layout (Simple [Striped], Mirror, Parity [Similar to RAID-5]).
7. Click “Next”.
8. Choose Thin or Fixed provisioning.
   • Thin: Uses space, as needed, from the storage pool. Drives can be added to the storage pool and that space would be available for the thinly provisioned virtual disk.
   • Fixed: Choose a set amount of space from the pool for the volume. Data usage can’t go over that.
9. Click “Next”.

10. Choose the Size of the virtual disk.

• Note that for thin-provisioned drives, you can set the capacity to larger than you have in the pool at the moment.

11. Click “Next”.

12. Then select Create on the next screen.

Step 3: Create a Volume on the Virtual Drive
The New Volume Wizard Appears After Virtual Disk Creation:

1. Click “Next”.

2. Select the Server and the virtual disk, which will be using this partition, and click “Next”.
3. Choose the Size (capacity) and click “Next”.
4. Choose the Drive letter or folder and click “Next”.
5. Choose the File system settings, and click “Next”.
6. Select Create on the confirmation screen.