Qnap TS-264 NAS with 2.5GbE LAN, M.2 SSD cache and HDMI 2.0

Last updated on 26 Sep 2022 📧 Subscribe

Qnap TS-264 NAS with 2.5GbE LAN, M.2 SSD cache and HDMI 2.0

TS-264-8G

CPU Intel® Celeron® N5105/N5095 4-core/4-thread processor (up to 2.9 GHz)
CPU architecture 64-bit x86
graphics processor Intel® UHD Graphics
floating point operations
encryption engine (AES-NI)
hardware acceleration shift
system memory 8 GB built-in (not expandable)
maximum memory 8 GB
flash memory 4 GB (dual-boot OS protection)
Number of hard disk slots 2 x 3.5″ SATA 6Gb/s
System shipment does not include hard drives.
For a list of hard drive compatibility, visit https://www.qnap.com/compatibility/
Supported hard disk types 3.5″ SATA HDD2.5
” SATA HDD2.5
” SATA SSD
Hot-plug support
M.2 slot 2x M.2 2280 PCIe Gen 3 x1
SSD cache acceleration support
2.5 Gigabit Ethernet port (2.5G/1G/100M) 2 (2.5G/1G/100M/10M)
Wake on LAN (WOL)
giant frame
PCIe slot 1
Slot 1: PCIe Gen 3 x2
USB 2.0 port 2
USB 3.2 Gen 2 (10Gbps) port 2 Type-A
Infrared (IR) receiver (Optional QNAP RM-IR004 remote control)
HDMI output 1. HDMI 2.0
Appearance upright
LED indicator Power/Status, Network, USB, HDD 1-2
button Power, USB Copy, System Reset
Dimensions (HxWxD) 168 × 105 × 226 mm
Weight (net weight) 1.55kg
Weight (total weight) 2.68kg
operating temperature 0 – 40°C (32°F – 104°F)
Storage temperature -20 – 70°C (-4°F – 158°F)
Relative humidity 5-95% RH (non-condensing), wet bulb: 27˚C (80.6˚F)
Power Supplier 65W Transformer, 100-240V
Power consumption: HDD sleep mode 8.198W
Power consumption: operating mode, normal 12.448W
Pass the hard drive full load test.
fan 1 x 70mm, 12VDC
system alert buzzer
Kensington security slot
Maximum number of simultaneous connections (CIFS) – maximum memory 1500
Note: Please use only QNAP memory modules to maintain system performance and stability. If the NAS device has multiple memory modules, please use QNAP modules with the same specifications.
Warning: Using unsupported modules may reduce performance, cause errors, or make the operating system unbootable.
HDMI, HDMI High-Definition Multimedia Interface, HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustration only, actual products may vary. Due to screen display errors, the actual color of the product may be different from the one shown on the website.
QNAP Technology reserves the right to make changes at any time without prior notice.


If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

ASK YOUR QUESTIONS HERE!

3 thoughts on “Qnap TS-264 NAS with 2.5GbE LAN, M.2 SSD cache and HDMI 2.0”