Synology Managed 10GbE PoE Network Switches Revealed – Synology PS Series

Last updated on 25 May 2025 📧 Subscribe
Contents hide
1 Synology (Finally) Reveals Managed PoE 10GbE Switches – The PS Series
1.1 Why is a Synology Switch so Highly Demanded? And Why is This Not Quite What Everyone Wanted?
1.2 Synology PS2600+ 26 Port L2+ Managed PoE Switch
1.3 Synology PS1000+ 10 Port L2+ Managed PoE Switch
1.4 Synology PS Series Switches, Conclusion and Verdict
2 Need Advice on Data Storage from an Expert?

Synology (Finally) Reveals Managed PoE 10GbE Switches – The PS Series

At Computex 2025, Synology formally unveiled its new PS Series of PoE switches—marking the company’s first venture into dedicated network switching hardware. Designed specifically for surveillance environments, these switches are not meant to replace general-purpose managed switches, but rather to complement Synology’s Surveillance Station ecosystem. The lineup includes three models: the high-capacity PS2600+, the compact PS1000+, and the entry-level PS500. Each model is tailored for powering PoE cameras and streamlining IP surveillance setups, with features like centralized control through Surveillance Station and fanless operation. While this launch addresses a long-standing gap in Synology’s ecosystem, it is clear that these devices are intended for a niche surveillance role rather than enterprise-wide or enthusiast-grade switching solutions.

Why is a Synology Switch so Highly Demanded? And Why is This Not Quite What Everyone Wanted?

For years, users of Synology’s NAS and surveillance solutions have speculated about the company expanding into networking hardware, particularly switches. Given Synology’s existing ecosystem of NAS units, cameras, routers, and software like Surveillance Station and SRM, a managed PoE switch seemed like the logical next step to unify its offerings under a single, tightly integrated platform. Many envisioned a Synology switch that could serve not just surveillance but also general-purpose networking, VLAN management, and broader SMB/enterprise deployments—effectively competing with established names like Ubiquiti, Netgear, or QNAP.

However, the PS Series unveiled at Computex 2025 diverges from that expectation. The PS2600+ and PS1000+ are exclusively intended for use with Synology’s Surveillance Station, lacking broader Layer 3 management tools outside of this context. Meanwhile, the PS500 is a basic, unmanaged unit aimed more at simple deployments than network optimization. There are no bundled camera licenses, limited software extensibility, and no SRM integration. As a result, while these switches will likely appeal to users looking for a seamless Synology surveillance setup, they fall short of the more versatile, all-encompassing switch that many long-time Synology users were hoping for.

Synology PS2600+ 26 Port L2+ Managed PoE Switch

The PS2600+ is the flagship switch in Synology’s new lineup, featuring 24 PoE+ ports and 2 additional 10GbE SFP+ uplink ports. Designed for rackmount or desktop use, the PS2600+ is completely fanless, making it suitable for noise-sensitive environments. It delivers a total PoE power budget of 185W, allowing it to power multiple IP cameras, particularly in larger surveillance setups. It is fully managed and integrates directly with Synology’s Surveillance Station for centralized control, including power management, port diagnostics, and network topology mapping.

In terms of network performance, the PS2600+ offers a switching bandwidth of 88 Gbps and a forwarding rate of 65.47 Mpps. It supports Layer 2+ features, including inter-VLAN routing and DHCP server capabilities, allowing it to segment and route traffic in more complex surveillance deployments. However, its software integration is limited exclusively to Surveillance Station, and it lacks any compatibility with Synology’s SRM (Router OS) or general-purpose network management tools. It is best suited for installations where the switch, NAS, and cameras are all part of a single, unified Synology surveillance environment.

Feature PS2600+
Ports (Total) 26
RJ45 1GbE Ports 24 (PoE+)
10GbE SFP+ Ports 2
Console Port Yes (RS-232 over RJ45)
Switching Bandwidth 88 Gbps
Forwarding Performance 65.47 Mpps
MAC Address Table 16K
Jumbo Frame Support 10,000 Bytes
Available PoE Power 185W
Extended Mode Yes
Power Supply Internal
Dimensions (H x W x D) 44 x 441 x 270 mm
Cooling Fanless
Mounting Rackmount / Desktop
L3 Features Static Routing, Inter-VLAN Routing, DHCP
Surveillance Integration Yes (via Surveillance Station CMS)

Synology PS500 5 Port Unmanaged PoE Switch

The PS500 is the most basic model in Synology’s PS Series and is designed primarily for entry-level surveillance setups. It offers a total of five ports, four of which support PoE+ for powering IP cameras or other devices. Unlike the other models, the PS500 is completely unmanaged—there is no software-based configuration, no VLAN support, and no integration with Surveillance Station CMS. It is intended for plug-and-play functionality, making it suitable for simple installations where centralized management is not required.

Despite its simplicity, the PS500 still delivers up to 60W of total PoE power and supports jumbo frames up to 9000 bytes. It is passively cooled and uses an external power supply, emphasizing its role as a compact, low-maintenance switch for desktop or wall-mounted deployments. While it doesn’t offer the flexibility or control of the PS2600+ or PS1000+, it fills a gap for users seeking a straightforward power delivery solution for small-scale IP camera installations.

Feature PS500
Ports (Total) 5
RJ45 1GbE Ports 5 (4 PoE+)
SFP Ports None
Console Port No
Switching Bandwidth 10 Gbps
Forwarding Performance 7.44 Mpps
MAC Address Table 2K
Jumbo Frame Support 9000 Bytes
Available PoE Power 60W
Extended Mode No
Power Supply External (72W)
Dimensions (H x W x D) 26 x 121 x 75 mm
Cooling Fanless
Mounting Desktop / Wall-mount
L3 Features None
Surveillance Integration No

Synology PS1000+ 10 Port L2+ Managed PoE Switch

The PS1000+ serves as the mid-range offering in Synology’s PS Series, targeting smaller surveillance deployments that still benefit from centralized management. It includes 8 PoE+ RJ45 ports and 2 standard 1GbE SFP ports for uplink or fiber connectivity. Like the PS2600+, this model is fanless and supports both rackmount and desktop installations. It offers a total PoE power budget of 65W, which is sufficient for a modest number of IP cameras or access points in home or SMB setups.

From a network performance standpoint, the PS1000+ provides 20 Gbps of switching bandwidth and a forwarding rate of 14.88 Mpps. It also supports VLANs, static routing, and DHCP services, and is managed entirely through Synology’s Surveillance Station interface. Its role is clearly focused—bridging NAS units and IP cameras under one platform, without offering broader Layer 3 functionality or third-party network integration. For users with Synology NAS-based NVR setups and fewer cameras, the PS1000+ provides a compact, low-noise, managed switch option.

Feature PS1000+
Ports (Total) 10
RJ45 1GbE Ports 8 (PoE+)
1GbE SFP Ports 2
Console Port Yes (RS-232 over RJ45)
Switching Bandwidth 20 Gbps
Forwarding Performance 14.88 Mpps
MAC Address Table Not Listed
Jumbo Frame Support 10,000 Bytes
Available PoE Power 65W
Extended Mode Yes
Power Supply Internal
Dimensions (H x W x D) 44 x 265 x 183 mm
Cooling Fanless
Mounting Rackmount / Desktop
L3 Features Static Routing, Inter-VLAN Routing, DHCP
Surveillance Integration Yes (via Surveillance Station CMS)

Synology PS Series Switches, Conclusion and Verdict

Synology’s entry into the network switch market with the PS Series marks a significant, though narrowly focused, expansion of its surveillance ecosystem. These switches are clearly designed with Surveillance Station users in mind, offering streamlined power and network management for PoE camera deployments. While the PS2600+ and PS1000+ provide useful managed features for larger and mid-sized surveillance environments, and the PS500 delivers a simple plug-and-play option, none of these models address general networking needs outside of Synology’s surveillance scope. For those seeking a unified Synology environment for NVR deployments, these switches may be a welcome addition—but broader adoption will likely remain limited until Synology delivers more versatile, multi-role networking solutions.

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕
       

      If you like this service, please consider supporting us.
      We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

      ☕ WE LOVE COFFEE ☕

      Or support us by using our affiliate links on Amazon UK and Amazon US
           

      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      Leave a Reply to Steve VuosoCancel reply

      80 thoughts on “Synology Managed 10GbE PoE Network Switches Revealed – Synology PS Series”

      2. 3:10 please tell them to stop using crowdfunding for these. If they want me to take them seriously as a company they need to grow up and start taking pre-orders like the big boys.
        REPLY ON YOUTUBE

        Reply

      5. So, in 2026 we will get the news that the Synology 10GB switches will only work with Synology’s certified cables, and that new Synology NAS systems will only work on a combo of those cables and Synology certified switches. When using normal network switches and cables, the new NAS systems will revert back to 100Mbps and will not allow making backups and it will disable some other random crucial stuff that they come up with… ???????????? Just a glimpse into the Synology future
        REPLY ON YOUTUBE

        Reply

      6. Clearly, Synology have been planning greater brand lock-in for some time. First, it was hard drives, now it looks as if switches may go the same route.

        Let me guess, they’re launching their own switch because others aren’t “verified” and tested to work with Synology products?

        Launching a switch only for Surveillance Station? I think someone at Synology has lost the plot. Does that mean that switch can only be used for Surveillance Station traffic and not between other nodes on a Surveillance Station enabled NAS?

        What’s the betting their switches will be 25 – 50% more expensive than third-party equivalents. Add to that, no included camera license and you can see the path Synology is choosing to take.
        REPLY ON YOUTUBE

        Reply

      17. Stop reviewing Synology, noise of HAT3310 series certified drives is a no go for home usage, even IronWolf Pro are a more quite drives, if compare with HAT3310. This brand makes sh_t drives, then certifies its devices to work only with NAS for 1.5 prices from ordinary disks and as a result you get noisy devices, not suitable for a quiet home office, you have to look for a closet where to hide them. #Synology_RIP.
        REPLY ON YOUTUBE

        Reply

      18. Stop reviewing Synology, noise of HAT3310 series certified drives is a no go for home usage, even IronWolf Pro are a more quite drives, if compare with HAT3310. This brand makes sh_t drives, then certifies its devices to work only with NAS for 1.5 prices from ordinary disks and as a result you get noisy devices, not suitable for a quiet home office, you have to look for a closet where to hide them. #Synology_RIP.
        REPLY ON YOUTUBE

        Reply

      19. Haha, I knew the Synology switches would get a bollocking in the comment section 😀
        Generally though I’m happy to see more companies developing 10GbE and SFP+ switches and routers. I’d prefer to go directly to 10Gb and skip 2.5Gb and 5Gb
        REPLY ON YOUTUBE

        Reply

      20. Haha, I knew the Synology switches would get a bollocking in the comment section 😀
        Generally though I’m happy to see more companies developing 10GbE and SFP+ switches and routers. I’d prefer to go directly to 10Gb and skip 2.5Gb and 5Gb
        REPLY ON YOUTUBE

        Reply

      37. Damn that UGREEN iDX6011 Pro looks good. First NAS I have seen with AV1 encode/decode in its codec block. Ill have to watch h a few more videos on this one. Are they easy to setup for Plex and good mobile apps?
        REPLY ON YOUTUBE

        Reply

      38. Damn that UGREEN iDX6011 Pro looks good. First NAS I have seen with AV1 encode/decode in its codec block. Ill have to watch h a few more videos on this one. Are they easy to setup for Plex and good mobile apps?
        REPLY ON YOUTUBE

        Reply

      40. A few things. The UGreen currently has an early pay a deposit scheme which will get you a cheaper price when the kickstarter happens.

        I’m so glad you covered the OWC stuff as I feel like they are often forgotten.

        The Pegasus looks very interesting and I hope you get that in to look into it more in the future.

        The UX-2 device looks like something that would fit nicely into some form of productivity rack.

        I hope you’re home and well now mate
        REPLY ON YOUTUBE

        Reply

      54. I went with the bog standard 423 using it for RAID and storage. I have no need for transcoding as all my TVs in the house are connected to PC and they operate on KODI. Just need a reliable dumping ground that is as reliable as I can make it to replace a usb external Raid enclosure without breaking the bank. Would love the 423+ but can’t justify a 120 + Tax price jump for cleaner lines and features I would never use. I did try Teramaster and my F4- 423 went DOA after less than 6 hours of use. Luckily i was just copying data so my source is still there. But its going back to amazon.
        REPLY ON YOUTUBE

        Reply

      55. I had problem about my synology nas
        And Steve Baker
        Technical Support Engineer write me about my problem that

        We are sorry to hear that your DS218 has to be reset. This is likely caused by an issue in the DSM operating-system.

        We understand that you are worried about losing your data. Please rest assured, your data should not be affected by the reset as the OS and data are stored in separate partitions on the drives. When re-installing the OS, the system should normally not touch the data-partitions of your drives.
        I beleived and i did what he said now all my data erased omg i shocked after sir Steve Baker dissepeared i am alone there is nothing in my hands
        Synology is regret bad nas choose qnap there isnt good support for problemss !!!
        There is no good service and support becarefullll!!!
        REPLY ON YOUTUBE

        Reply

      56. Pretty lost, just need something to stream my Plex from. My old external hard drive does not cut it anymore and my computer has to stay on. Apple Killed home sharing basically so looking for a different solution. Have no idea what is overkill and what is needed. I was looking at the Synology 923+ but it seems a bit overkill for what I need.
        REPLY ON YOUTUBE

        Reply

      59. I don’t know how your audience feels, but I am done with mechanical hard drives. They break, are noisy, slow. The added size is not worth it after you’ve set a few NASs and realize that in a RAID 5 setup, when you replace a drive, the system wears out a lot just setting itself up again one time. I want quiet, high endurance 2.5″ SSDs or NVMes. I don’t need speed, but I’m sick of delicate HDDs.
        All these systems seemed to be 3.5″ drives, although I fast forwarded through much.
        REPLY ON YOUTUBE

        Reply

      62. So, am I wasting my time looking at the DS923+ for £470 GBP? I should be looking at the DS423+ model instead? Mainly PC/Laptop full system backups, video backups, photos and maybe the odd film or TV show now and again? My DS215J is EOL and needs to be replaced.
        REPLY ON YOUTUBE

        Reply

      63. Still rocking my DS-918+ with 32GB of RAM. It kills me that Synology went to one soldered on memory module in this form factor. That is probably my biggest obstacle for not conveniently upgrading, well that and upgrading and moving nearly 24TB of content will not be cheap, easy and efficient.
        REPLY ON YOUTUBE

        Reply

      65. Which NAS will let me install an open source OS on it? Which NAS supports symbolic links? I want to link directories in Westerns to Clint Eastwood, John Wayne, etc. directories.
        REPLY ON YOUTUBE

        Reply

      67. Always, always, always great information!! Thank you.

        Best mass storage synology with hardware transcoding for those of us that refuse to delete media from our Plex server?

        Keep the great videos coming!!!
        REPLY ON YOUTUBE

        Reply

      70. i’ve been watching tons of ur videos in the past week trying to figure out what synology suits me… but the more I watch, the more I’m coming to the conclusion that synology just doesn’t make a good modern, or rather up-to-date, solution, their new ones have ryzen in them, but they put a 1600 in it instead of a cpu with an igpu in it… it just doesn’t make sense. then if i want any ability to use plex or something, i’d need to use an old intel cpu. i understand that this old intel cpu can do the job, but i’m not wanting to pay for old hardware… it’s just the principle. i’m almost inclined to just buy a hdd and a usb enclosure to just manual back up until synology releases something worth buying, hardware-wise. and then use an old pc to run plex. would much rather use a synology for this, but again, synology doesn’t seem to want to release a proper modern solution.
        REPLY ON YOUTUBE

        Reply

      72. 0:00: ???? Sonology UK is running a cashback promotion for their DS 223, DS 723 plus, DS 223j, and DS1 1522 plus models when purchased prepopulated from select retailers with Sony’s own hard drives.
        4:20: ???? The video discusses the features and benefits of the Synology DS220+ NAS device.
        8:33: ???? Hot swapping allows for the removal and introduction of drives without powering down the system, making it appealing for minimizing downtime and migrating to newer systems.
        12:54: ???? The DS 423plus is recommended for Plex Media Server and has upgradable memory and M2 mvme slots for faster storage.
        17:26: ???? The d723 is highly recommended for photo editors, offering a larger storage array and intelligent filters.
        21:48: ???? The video discusses the features and potential of a high-performance storage system for business users.
        26:29: ???? The video discusses the benefits of using the DVA 1622 surveillance system from Synology for photography and surveillance purposes.
        31:28: ???? The Synology NAS system supports up to 32GB of memory and can run any application, making it ideal for photo and video editors and businesses looking for cloud backup solutions.
        36:14: ???? The video discusses the power consumption and compactness of desktop units, specifically the 12-bay version with storage expansion options.
        40:41: ???? The DS3622 is a powerful and expensive desktop solution from Synology, designed for virtual machines and storage operations.
        45:23: ???? The video discusses different types of Sony rack mount solutions and their hardware architecture.
        Recap by Tammy AI
        REPLY ON YOUTUBE

        Reply

      74. I started out with a DS220j and dropped 2x18TB drives in it as my Drobo was on its last legs… The DS220j was no where near enough space even when in JBOD mode.
        After a couple months I bit the bullet and got a DS1522+ added 2 more 18TB drives and maxed out the ram at 32G and then added a pair of NVMe (1TB) .
        It took a little over a week to move all my data over to it and set up the *Video Station* *Audio Station* *VPN* and *SFTP*

        It is not bad all things considered….
        The only things I am disappointed with are the file share permissions… I am utterly surprised at how limiting this is…. I have been an IT manager for near 25 years and we use windows and Linux File Servers… The fact that I cannot choose the root folder based on user or group is flat astonishing.

        Also… The interfaces are completely unusable for my blind users. Thank Goodness I am able to have my blind users access things via SFTP using Filezilla.
        REPLY ON YOUTUBE

        Reply

      76. I’ve been mulling over a NAS for the couple of years now, mostly as a way to get my kids, my wife, and myself OFF of Apple’s Cloud service. Is this possible? Is there a way to set up a NAS just so all the family can backup/store all their iPhone photos/video from anywhere in the world? I’m just a bit confused what’s possible here, and believe me I’ve been monitoring and reading up on all this NAS stuff for like the last two years, as I said. Any suggestions?
        REPLY ON YOUTUBE

        Reply

      77. Awesome video and you confirmed my choices. Whew! I just installed a DS1522+ at home and couldn’t be happier. I added the 10GbE module since I edit. For the video business I have about 18 DS1821+ units. I upgrade RAM to 32GB and put in dual 10GbE NIC. We cut massive 16 multi camera shows with this config and it works perfect. I’ve had this work with up to 8 editors working at the same time.
        REPLY ON YOUTUBE

        Reply

      78. As far as I know, you can NOT upgrade a DS1821+ to become a DS1823xs+. The problem is that they have different CPU’s that run at significantly different speeds. Synology’s new policy of requiring only their drives to populate the xs machines has caused me to look for a different solution. I wanted to upgrade my DS1515+ with simple drive migration from the old machine to the new (the drives are only 1.5 years old – Ironwolf Pro). But Synology refuses to allow this anymore on xs machines. Synology has gone so far as to require sellers to ONLY sell DS1621xs+ machines fully populated. This is NOT the way to keep me recommending their products to my clients.
        REPLY ON YOUTUBE

        Reply

      79. Just be careful with this recommendation, if you intend to make ANY memory upgrades. The DS723+ and DS923+ with ANY Synology memory upgrades will cost you almost or MORE than the DS1522+ that comes with 8GB stock, So is always cheaper to go strait way to this model. If you go the route of not using Synology memory just be aware that yours warrant is voided if the NAS dies.
        REPLY ON YOUTUBE

        Reply