RAM upgrade for Qbap NAS TVS-682 ,TVS-882 , TVS-1282
These are official RAM sticks for x82series NAS. I will add compatible Crucial RAM bellow.
RAM-16GDR4-LD-2133 UK USA | DDR type: DDR4(288PIN)
Capacity: 16GB Spec: 1G x 8 Manufacturer: TRANSCEND Frequency: DDR4-2133 Form(PIN): 288PIN Manufacturer P/N: TS2GLH64V1B Power Supply: 1.2V Dram Organization: 2048M*64 Temperature: 0℃~85℃ Environmental Regulation: RoHS Note: IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory. |
RAM-4GDR4-LD-2133 UK USA | DDR type: DDR4(288PIN)
Capacity: 4GB Spec: 512M X 8 Manufacturer: TRANSCEND Frequency: DDR4-2133 Form(PIN): 288PIN Manufacturer P/N: TS512MLH64V1H Power Supply: 1.2V Dram Organization: 512M*64 Temperature: 0℃~85℃ Environmental Regulation: RoHS |
RAM-8GDR4-LD-2133 UK USA | DDR type: DDR4(288PIN)
Capacity: 8GB Spec: 512M X 8 Manufacturer: TRANSCEND Frequency: DDR4-2133 Form(PIN): 288PIN Manufacturer P/N: TS1GLH64V1H Power Supply: 1.2V Dram Organization: 1024M*64 Temperature: 0℃~85℃ Environmental Regulation: RoHS Note: IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory. |
Crucial RAM
Crucial 8GB DDR4-2666 UDIMM |
CT8G4DFS8266 |
Configuration ID: CT9497956 |
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 1024Meg x 64 • |
Crucial 8GB DDR4-2400 UDIMM |
CT8G4DFS824A |
Configuration ID: CT9497922 |
DDR4 PC4-19200 • CL=17 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • 1024Meg x 64 • |
Crucial 32GB Kit (2 x 16GB) DDR4-2666 UDIMM |
CT2K16G4DFD8266 |
Configuration ID: CT9497909 |
DDR4 PC4-21300 • CL=19 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • |
Crucial 16GB Kit (2 x 8GB) DDR4-2666 UDIMM |
CT2K8G4DFS8266 |
Configuration ID: CT9497921 |
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 1024Meg x 64 • |
Crucial 16GB DDR4-2666 UDIMM |
CT16G4DFD8266 |
Configuration ID: CT9497925 |
DDR4 PC4-21300 • CL=19 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • |
Crucial 16GB Kit (2 x 8GB) DDR4-2400 UDIMM |
CT2K8G4DFS824A |
Configuration ID: CT9497905 |
DDR4 PC4-19200 • CL=17 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • 1024Meg x 64 • |
Crucial 32GB Kit (2 x 16GB) DDR4-3200 UDIMM |
CT2K16G4DFD832A |
Configuration ID: CT14289015 |
DDR4 PC4-25600 • CL=22 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-3200 • 1.2V • |
Crucial 16GB DDR4-2400 UDIMM |
CT16G4DFD824A |
Configuration ID: CT9497914 |
DDR4 PC4-19200 • CL=17 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • |
Crucial 4GB DDR4-2400 UDIMM |
CT4G4DFS824A |
Configuration ID: CT9497910 |
DDR4 PC4-19200 • CL=17 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • 512Meg x 64 • |
Crucial 8GB Kit (2 x 4GB) DDR4-2400 UDIMM |
CT2K4G4DFS824A |
Configuration ID: CT9497937 |
DDR4 PC4-19200 • CL=17 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • |
Crucial 16GB DDR4-3200 UDIMM |
CT16G4DFD832A |
Configuration ID: CT14196486 |
DDR4 PC4-25600 • CL=22 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-3200 • 1.2V • |
Crucial 32GB Kit (2 x 16GB) DDR4-2400 UDIMM |
CT2K16G4DFD824A |
Configuration ID: CT9497943 |
DDR4 PC4-19200 • CL=17 • Dual Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2400 • 1.2V • |
Crucial 4GB DDR4-2666 UDIMM |
CT4G4DFS8266 |
Configuration ID: CT11944073 |
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 512Meg x 64 • |
Crucial 8GB Kit (2 x 4GB) DDR4-3200 UDIMM |
CT2K4G4DFS632A |
Configuration ID: CT14265850 |
DDR4 PC4-25600 • CL=22 • Single Ranked • x16 based • Unbuffered • NON-ECC • DDR4-3200 • 1.2V • 512Meg x 64 • |
Crucial 8GB Kit (2 x 4GB) DDR4-2666 UDIMM |
CT2K4G4DFS8266 |
Configuration ID: CT11947363 |
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • 512Meg x 64 • |
Crucial 4GB DDR4-3200 UDIMM |
CT4G4DFS632A |
Configuration ID: CT14167755 |
DDR4 PC4-25600 • CL=22 • Single Ranked • x16 based • Unbuffered • NON-ECC • DDR4-3200 • 1.2V • 512Meg x 64 • |
Crucial 8GB DDR4-3200 UDIMM |
CT8G4DFS832A |
Configuration ID: CT14185550 |
DDR4 PC4-25600 • CL=22 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-3200 • 1.2V • 1024Meg x 64 • |
Crucial 16GB Kit (2 x 8GB) DDR4-3200 UDIMM |
CT2K8G4DFS832A |
Configuration ID: CT14276109 |
DDR4 PC4-25600 • CL=22 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-3200 • 1.2V • 1024Meg x 64 • |
Crucial 32GB (2 x 16GB) DDR4-2666 UDIMM |
CT2K16G4DFS8266 |
Configuration ID: CT14350648 |
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • |
Crucial 16GB DDR4-2666 UDIMM |
CT16G4DFS8266 |
Configuration ID: CT14344701 |
DDR4 PC4-21300 • CL=19 • Single Ranked • x8 based • Unbuffered • NON-ECC • DDR4-2666 • 1.2V • |
Upgrade Memory on QNAP NAS (RAM Module Installation)
Warning:
The following instructions should only be performed by an authorized and trained
technician.
Strictly adhere to the instructions to install a RAM module on the NAS. Failure to do so
could result in injury to human body or death.
Before starting, please ensure that you turn off the NAS, disconnect the power
adaptor, network cable(s), and also remove any other device/cable that is attached to
the NAS.
Please ensure that you wear an antistatic wrist strap during the entire process to
prevent electrostatic discharge. The crocodile clip should be connected to the ground.
When installing two memory modules, it is recommended to use the same size and
ideally use the same type/model for both slots.
Follow these steps to install an extra memory module on the NAS.
1. Loosen the screws from the rear to remove the cover (TVS-682 series: 3 screws;
TVS-882 series: 6 screws; TVS-1282 series: 7 screws.)
The above figure is shown as demonstration only.
2. Remove the case cover of the NAS
3. Unplug the cable that is connected to the motherboard, loosen the screw on the fan
module, press down the hook and then pull out the module.
4. Pull the retention clips on each side so that the module can be removed. Remove the
installed memory modules.
Note: The maximum supported memory is 32GB combined.
5. Press down the memory module to the slot and until it clips into place. Ensure the
memory module sits properly with the clips in place. Install the upgraded module in
either the blue or black slots.
6. Reinstall the fan module and reconnect the cable to the motherboard, Close the case
cover and fasten the screws. Connect the power adaptor and cables back to the NAS.
7. To check that the memory module is recognized by the NAS, power up the NAS and log
into the web interface as an administrator. Go to “System Status” > “System
Information” and check the total memory in “Hardware Information”.
(Early Access) The Best DIY NAS Builds for Under $500
(Early Access) DIY NAS vs Lockerstor Gen 3 - IS IT WORTH $1299 ???
(Early Access) Lockerstor Gen 3 Series - SHOULD YOU BUY ONE?
(Early Access) Asustor ADM 5 Software Review - Should Synology Be Worried?
(Early Access) Best 8-Bay NAS of 2024
(Early Access) Best 4-Bay NAS of 2024
(Early Access) Best 2-Bay NAS of 2024
(Early Access) Best Value NAS of 2024 - SAVE SOME MONEY!
(Early Access) Lockerstor 4 Gen3 Review - GO HOME EVERYONE
(Early Access) eufyCam S3 Pro Review
(Early Access) Addlink G55 Gen5 SSD Review - Best DRAMLESS SSD EVER?
(Early Access) Terramaster T9-500 PRO Max NAS - Should You Buy (Review)
Access content via Patreon or KO-FI
DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE