Which 18TB/ 20TB Drives (HDD) supported and compatible with Synology

Synology Enterprise Verified Drive White List “vendor lock”

Apparently, I made Kevin and Connor at Storage Reviews mad, because I called them out for publishing an opinion piece (end of business on a Friday) about the future of Synology products, without contacting Synology for a comment on their future products. When I emailed Synology myself to fact check their article Reddit turned into a high school drama of pitch forks and called for boycotting Synology.

I contacted Synology myself from synology

Storage Reviews has already edited their opinion piece removing the content I quoted, I have a suspicion Synology reached out to them because I wasn’t the only individual to contact Synology support for clarification. Especially considering Synology sent them ~$13,000 MSRP in products for review including 16 of their special drives. Oops.
https://www.storagereview.com/review/synology-unverified-drive-experience?amp

They removed many of these fear mongering lines: “the Red Critical Fault Unverified Drive warnings are a scare tactic to purchase Synology drives…, Synology’s drive capacities stop at 16TB, where several 20TB options available for half the cost…, Synology drives are just a corporate cash grab…, Synology is going forward with the unverified drive restrictions could get worse in 2022 series NAS…, may impose more drive restrictions…, but ultimately Synology is wrong in its draconian approach.”

Later Kevin was upset I quoted his man Connor, apparently, they didn’t want to be quoted back to Synology support, and eventually posted Synology’s response proving the panic over Enterprise Verified Drive White List was a false alarm fear mongering the community days after their Friday article got the panicked attention of the community.

Official Statement from Synology on the HDD situation from synology

But now we finally have an official response on the future of Synology Enterprise Verified Drive White List. You can quote it without the unnecessary drama, now that the issue has been clarified by the source. For some reason Kevin didn’t actually list the name of the manager of Synology’s strategic comm’s group. I’ll assume you can fill in that blank or use this to get your own clarification from Synology on the future of their Enterprise Verified Drive White List.

Doesn’t even matter, several users have already copied the Hard Drive White List from the older DS2419 and DS3617 to the new models successfully.

 

 

Share HDD compatibility with NAS community! Get a notification when something new is added to the list!
WDUltrastar HC550WUH721818ALE6L418TBDS1821+
83%
SeagateExosEnterprise18TBSynology 420J
70%
HGSTHGSTHDN724040ALE6404 TBDS1821+
100%
ToshibaNearlineEnterprise18TBDS211
83%
SeagateIronWolf ProST20000NE00020TBSynology DS1520+
75%
WDUltrastar HC560WUH722020ALE6L420TBDS1522+
75%
SeagateIronWolf ProST20000NTZ0120TBDS1520+
75%
WDGoldWD181KRYZ18TBDS2419+
67%
WDGoldWD181KRYZ18TBDS1515+
57%
SeagateIronWolf ProST20000NTZ0120TBDS1520+
100%
western digitalWD120EDAZ-11F3RA05PJDMWBD12TBDS920+
100%
WDGoldWD181KRYZ18TBDS1821+
50%
WDGoldWD181KRYZ18TBDS916+
50%
western digitalWD120EDAZ-11F3RA05PJDMWBD12TBDS920+
WDWD120EMFZ-11A6JA0QGGKXMWT12TBDS920+
WDWD120EDAZ-11F3RA05PJDW5HD12TBDS920+
WDWD120EMFZ-11A6JA0QGGK2XMT12TBDS920+
seagateST16000NM001GN/A16ts-420

How to fix drive locking (not recognised) on Synology

 

WARNING: Follow these steps at your own risk.

 

Step 1

Enable SSH on the Synology and log in with your admin account, then type:

sudo -i

and type in your password.

 

Step 2

Navigate to the folder where the drive list is stored.

cd /var/lib/disk-compatibility

 

Step 3

edit *_host.db and *_host.db.new and add your drive. In our case we had to add this line to the DB rs2821rp+_host.db and rs2821rp+_host.db.new

{"model":"WD102KRYZ","firmware":"01.01H01","rec_intvl”:[1]},

 

 

Some drives in that file don’t have a firmware defined, so for you, you could try to copy that entry and add your model number of the drive. Another option is to look in the DB for the expansion unit for your drive, we found our config there. Just make sure “rec_intvl” is set to 1 if you copy the entry. Ours was standard 3 and that didn’t work.

 

Save and quit both files with :wq and then reboot the NAS, if everything is done correctly the NAS should say the disk status is normal.

 

https://linustechtips.com/topic/1371655-synology-dsm-7-drive-lock-bypass/

 

 



If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

Leave a Reply to EduardoCancel reply

One thought on “Which 18TB/ 20TB Drives (HDD) supported and compatible with Synology

  1. Hi, your site is great and your opinion always help us.. congrats !!

    I have a DS720+ with first Ironwolf PRO 16TB (firmware EN02), but I am interesting to put a second one mine, Ironwolf PRO 18TB but its firmware version EN01..
    I did contact Seagate Support to help me updating the firmware to EN02 but it was the same like a nothing.
    I had get look that EN02 provide more tools on Disk Mgm of DSM7…

    1- Could I do local firmware update on Ironwolf PRO 18TB or I can buy a new Ironwolf PRO 20TB shoud be latest EN02 firmware version?
    2- Is there some problem use different firmware versions?

    Thank you.. regards!!