Synology DS Router 2.0 – Quick Review

Synology DS Router 2.0 Mobile App Review

Synology, as a brand, has always been remarkably keen to highlight its software more than its hardware. That isn’t to say that the brand does not have some great hardware in its portfolio, but they would rather be known as a ‘solution’ provider, as opposed to a ‘hardware’ provider. Their software development often extends much further than just the system and services that their hardware includes (e.g. DSM, SRM, Surveillance Station, etc) and alongside their onboard software, they have long been producing a wide range of client hardware tools that integrate with their solutions and allow much more convenient and tailored access to their systems. One such application that has seen a big update in 2022 is the mobile client application DS Router for iOS and Android, which is now available in version 2.0. The Synology router portfolio is a little smaller than the rest of their Diskstation, Rackstation and Surveillance focused solutions, but this has not seemingly dulled continued development on router software and DS Router 2.0 has arrived with promised improvements in its GUI, it’s range of supported services of your Synology router system and a greater degree of control possible via this highly convenient mobile app. So today I wanted to write a short review on this latest update to the app and find out if this app is as good as they say it is, whether this adds to a compelling reason to switch to their network ecosystem and ultimately if Synology Routers deserve your data. Let’s start.

DESIGN - 9/10
SECURITY - 9/10
CONTROL - 9/10
FEATURES - 8/10
EASY OF USE - 8/10


8.6
PROS
đŸ‘đŸ»Easy to use and follow controls
đŸ‘đŸ»Modern and Intuitive design
đŸ‘đŸ»Safe Access management on the fly is 10/10
đŸ‘đŸ»Wireless Management on the fly is also tip-top
đŸ‘đŸ»Device Monitoring and Management is fast and clear
đŸ‘đŸ»Very Responsive GUI
đŸ‘đŸ»Traffic/Activity Monitoring is very good (plus supports historical data)
CONS
đŸ‘ŽđŸ»The Settings Menu seems overly full and some items should be standalone/selectable on the bottom bar

Synology DS Router 2.0 Review – GUI and Navigation

The user interface of DS Router 2.0 is very clear and after you have entered your login credentials (as well as the 2-step authentication of course, that is fully supported too) you are taken to a very easy to follow and clean GUI. The initial screen is quite understated, with it highlighting the accessed system internet connectivity, a notification bell to highlight anything pressing that needs your attention and some basic level details that are by no means intimidating. This initial lite overview also allows you to share the access to this WiFi connection in 2 clicks with anyone in your vicinity via a bunch of methods native to your handset. If you are looking for more information on the control and customization of your Synology Router via the app, then you will need to click the settings tab and that shows a much more detailed breakdown of what the app has control over.

As user-friendly and clear as this all is in DS Router 2.0, I would definitely have preferred the network tools/controls to be their own option on the bottom row (alongside Device List and Safe Search) as most people using DS Router 2.0 with their router will be using it to manage and monitor their network on the fly and it seems a tiny bit odd to go to ‘settings’ on the app, compared against the PC/Mac desktop interface SRM that places these controls under ‘Network Center’ and has a separate ‘Control Panel’ for settings. All that said, the settings menu is pretty exhaustive and although it seems to have the controls for EVERYTHING, it does seem a little TOO general. Overall, you definitely cannot criticise the level of controls available in DS Router 2.0, but the layout could maybe be expanded a bit on the bottom control bar.

Synology DS Router 2.0 Review – Network Activity Monitoring

The DS Router 2.0 app allows you to monitor the activity of your Synology router on the fly, as well as access historical records (if you have enabled the system option to keep records). These records can be extended to track upload/download traffic into the router WAN, but you can also access details on the individual devices on the network and how much data (packets or MB/KB/etc) is being exchanged. Once again, this UI is incredibly straightforward and pretty intuitive.

This traffic and resource monitoring does not extend to monitoring the CPU/Memory usage (which CAN be checked in the ‘router information area), but it does show a list of the active processes and services running on the router and how much of a bite they are taking on the router and which are eating up the bandwidth more than others. It’s a fairly expected and non-ground-breaking tool, but the fact it can also include historical data whilst on the fly (accessible via a convenient mobile app) definitely rates it much higher than many other traffic/network monitoring mobile router tools out there.

Synology DS Router 2.0 Review – Mesh Controls

One of the most prominent features that have been highlighted in recent releases of the Synology Ruter series is the support of mesh router support. This is when a primary network can be wirelessly (or in some cases wired) expanded by a physical network of nodes that are dotted around your home or place of work. As useful as a desktop PC/Mac user interface is for navigating the SRM 1.3 software, adding nodes is always going to be much, MUCH easier to do if you are using a mobile. This is because of physically moving around to test signal strength and optimal connectivity via the primary router and the node(s). The Synology DS Router 2.0 application allows you to easily add nodes (including setup and signal improvement suggestions) and expand your wireless network easily.

Again, this is not something that is new to router mobile apps but it is worth highlighting, as when it comes to mobile control and management of a router, this can be a real killer to have to do on a static machine. Plus, it is provided easily and very straightforwardly.

Synology DS Router 2.0 Review – WiFi Controls

Controlling and monitoring your WiFi networks with DS Router 2.0 is also a great deal more detailed that you might expect. The latest Synology RT6600ax router supports upto x15 SSIDs on a network and the WiFi control of DS Router 2.0 not only allows you to change their basic individual settings (name, security protocols/encryption, passcode, etc), but it also allows you to do some more precise things. This includes the ability to connect an SSID to a specific 2.4/5Ghz band (or both), change the radio channel between 20-160Mhz to use the available frequency more efficiently, to black/white list Mac Addresses or IPs or even lock the WiFi to a schedule.

Alongside this, you have the option to take advantage of Smart connect, which runs in the background of your router’s WiFi to automatically move connected devices from the 5Ghz (faster by smaller range) connection to 2.4Ghz (slower, but much further reach) frequency as client hardware changes location. Finally, you have similar options available to create and edit your guest WiFi network as needed – all manageable from the DS Router application. I genuinely cannot fault this area of DS Router 2.0 and in fact, it was significantly faster/easier to navigate WiFi settings on mobile than on the desktop!

Synology DS Router 2.0 Review – Client Monitoring

Next, you have client monitoring and control tools. From the ‘Device List’ tab, you are able to see all the connected devices to your Synology router (as well as a history of previously connected or offline devices) that allows you to customize what level of access and priority those devices have on the overall bandwidth. The initial Device List GUI breaks the devices into wired/wireless, but also shows their level of network traffic, the frequency/band they are occupying and the SSID/LAN they are living on at that time.

Each of these client entries can be opened up into its own sub-menu that allows you to name the client hardware and apply an icon suitable to it (e. phone, tablet, printer, etc). More interestingly though, you can also make immediate changes to how that device is being handled by the router with some hardcoded options. These include the ability to move the device into a Low or Medium device group (to apply on-the-fly priority of service if you need a given client to have their connectivity at that second to be adjusted), as well as a single click slider option to temporarily pause internet access for a client device on the fly. This is all presented very clearly again and with as little tech jargon (outside of terms like IPs and MAC addresses) as possible.

Synology DS Router 2.0 Review – Safe Access

Almost certainly the ‘jewel in the crown’ of the Synology Router system is the ‘Safe Access’ feature that allows you to create a completely customized, dynamic and human-friendly control system for your entire network. It would be tremendously unfair to think of it as a simple ‘Parental Control’ system (which I should add several mid-high level router providers seemingly lock behind a subscription wall, disappointingly) as that would be like comparing a push-bike with Harley Davidson! In brief, Safe Access allows you to create user profiles for every member of your family/office/business and then connect their client devices to that profile (eg Mum, Dad, HR, Children, Printers, security cameras, etc). Once you have done that, you can then create easy to create, customize and control rules that will apply to a specific profile and filter down into all the devices underneath it (adding a user photo and router login credentials too if you choose). The range of rules and parameters that you can apply to a profile are both extensive AND very easy to understand. As new devices connect to the router, you can add these in 2 clicks to an existing Safe Access Profile OR in 3-4 clicks, create a brand new one.

Each profile can be adjusted to quite an impressive degree in DS Router 2.0 and there are several network monitoring tools available to see their current/historic network usage. Digging a little deeper into the profile creation shows that in DS Router 2.0 you have pretty much ALL the configuration and on-the-fly profile management controls that are available in Safe Access on the desktop SRM 1.3 platform. You can create internet access and time quote rules (time of date, day of the week and even number of hours that a user is allowed to connect, that can be spread across each of their devices to prevent overlap/abuse of access by hopping devices), as well as apply a rather dynamic web filter to a specific Safe Access profile. So, for example, you can choose to craft rules for a specific profile that means that all devices under ‘Daniel’ (in this case a teenager) share a 2-hour evening internet access (spread across their phone/home console), but only between 5-9pm and allows access to educational/homework-related sites, but not adult or social media sites. This same kind of profile rule logic can be applied to staff/employees when you need to provide internet for work, but need some sites restricted for SOME employees but not all (eg, ‘marketing’ team needs all social media outlets, but not the warehouse teams).

When it comes to that Web Filtering, the controls that are included in DS Router 2.0 are almost identical to those of the desktop web browser SRM 1.3 GUI – which (for when you need to make changes quickly on the fly whilst at work/off-site) is going to be fantastically useful. There are several preset profiles that can be switched between, or you can craft your own bespoke profile. You can also ‘force’ safe-search rules on a wide range of social networks and search engines which means that explicitly or inappropriate material is filtered out on these sites before they are viewed by the destinate client device. This safe search push will override any settings on that search engine by the user, even if they are logged in (eg Google Search and having your Gmail account logged in).

Overall, I cannot stress enough that alongside Synology Routers having Safe Access largely justifying the whole system, the controls of it that are available in DS Router are EXACTLY the level of ease-of-use and level of control that parents and employers are going to need access to at a moments notice. Plus, the level of creation and modification you can make with DS Router 2.0 to newly connected devices to the network is just as good. Massive thumbs up from me.

Synology DS Router 2.0 Review – Cross Service & USB

Before I end the review of DS Router 2.0 for iOS and Android, I wanted to talk about one of the often overlooked features of Synology Routers and mobile applications from the brand. All Synology routers feature 1-2 USB Ports and because Synology is a brand that is largely associated with NAS development (committing millions of hours of R&D into that industry) you will not be too surprised to know that connecting a USB drive to your Synology router will allow you to use a whole bunch of Synology NAS applications and services on your mobile phone. Now, I am not suggesting that the RT6600ax, RT2600ac or MR2200ac are suitable replacements for a NAS, however, I AM suggesting that the range of services available for a USB storage device in SRM 1.3 and DS Router 2.0 is surprisingly fleshed out. The DS File mobile application allows you to see the full file/folder structure, create customizable share links for the files (network or remote access), allows shared folder management, zip/extract collections of files, view several different types of files on the device and is pretty much exactly the same user experience that a Synology NAS user would have on in this app, but with just a USB drive.

Additionally, the DS File application in use with a Synology router also allows you to create an automatic photo backup from your mobile devices,directly to the USB storage connected to the router. I know this is not a DS Router application, but the fact this is something that is still possible was just too interesting not to mention. The phone photo backups can be set to only backup any/all photos taken (that are saved to certain directories, such as DCIM) from that point onwards, only backup all your existing photos upto that point, or the best of both and have a regular backup of all your photos on the fly from your handset to the router and to the USB. Its a very minor thing I know, but the idea that the Synology router allows you to create a pretty full proof live sync photo backup from your phone with any old USB is pretty cool.

My FULL review of the Synology DS Router application will be available on NASCompares shortly. You can find the video below:

Synology DS Router 2.0 Mobile App Review – Conclusion & Verdict

Overall, DS Router 2.0 is still a great application and the wider range of services and controls that have been added to this latest version definitely make it much more viable as a long term alternative to the desktop GUI/SRM 1.3 when managing your router. The GUI is still not the best it can be, with odd ‘everything else here’ vibes from the ‘settings’ menu, but it is incredibly clear, pretty intuitive and manages to make the navigation and management of your router to be much less intimidating than many would think. Some things are near impossible to simplify (port forwarding rules, for example) but even there, DS Router gives it a try. The controls of both Safe Access and Wireless Management are particular standouts of how the new version of the app has increased convenient control and although DS Router does not completely remove the need/necessity of a web browser and time in SRM to set up your router, it is pretty darn close!

 

PROs of the DS Router 2.0 CONs of DS Router 2.0
Easy to use and follow controls

Modern and Intuitive design

Safe Access management on the fly is 10/10

Wireless Management on the fly is also tip-top

Device Monitoring and Management is fast and clear

Very Responsive GUI

Traffic/Activity Monitoring is very good (plus supports historical data)

The Settings Menu seems overly full and some items should be standalone/selectable on the bottom bar

 

Synology Router Portfolio

RT6600ax

RT2600ac

MR2200ac

Class / band
compatible standards
AX6600 / Tri-band
IEEE 802.11ax / ac / a / b / g / n
AC2600 / dual band
IEEE 802.11ac / a / b / g / n
AC2200 / Tri-band
IEEE 802.11ac / a / b / g / n
Maximum communication speed
(5GHz band 1)
4800Mbps

(160Mhz)

1,733Mbps
(4str / 80MHz)
867Mbps
(2str / 80MHz)
Maximum communication speed
(5GHz band 2)
1200Mbps incompatible 867Mbps
(2str / 80MHz)
Maximum communication speed
(2.4GHz band)
600Mbps 800Mbps
(4str / 40MHz / 256QAM)
400Mbps
(2str / 40MHz / 256QAM)
WAN terminal 1000BASE-T x 1 1000BASE-T x 1 1000BASE-T x 1
LAN terminal 2.5GBASE-T x 1 * 1
1000BASE-T x 3
1000BASE-T x 4 * 2 1000BASE-T x 1
USB terminal USB 3.0 Standard-A x 1 USB 3.0 Standard-A x 1
USB 2.0 Standard-A x 1
USB 3.0 Standard-A x 1
CPU Qualcomm IPQ6018
Arm Cortex-A53 4-core 1.8GHz
Qualcomm IPQ8065
Qualcomm Krait 300 2 core 1.7GHz
Qualcomm IPQ4019
Arm Cortex-A7 4 core 717MHz
RAM 1GB DDR3 DDR3 512MB DDR3 256MB

 

You can watch the FULL review of the latest WiFi 6 Router from Synology, the RT6600ax, over on YouTube below:

Alternatively, you can watch my full review of Synology SRM 1.3 on this NAS in the video below:

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       

       

      locked content ko-fi subscribe
      Summary
      Review Date
      Reviewed Item
      Synology DS Router 2.0 - Quick Review
      Author Rating
      41star1star1star1stargray

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      Leave a Reply to Georgie HogmanCancel reply

      226 thoughts on “Synology DS Router 2.0 – Quick Review

      1. Mbps is not equivalent to MB/s (mega bits vs mega bytes). To convert you simply have to divide by 8, and you get 600Mbps -> 75MB/s, 4800Mbps -> 600MB/s, and 1200Mbps -> 150MB/s
        REPLY ON YOUTUBE

      2. hi, i hvae the 2600ac, don’t need wifi 6, but i really do need NAS, does 2600ac do NAS functions same as 6600 ? and also if i need NAS could i do so, if this 2600 is 2nd router, i guess an AP, after my cable router, connected LAN to LAN, thanks
        REPLY ON YOUTUBE

      3. I realize it would probably reduce performance on both fronts, but would any sort of USB hub / splitter be compatible, allowing you to use both a USB drive and mobile tethering or two USB drives?
        REPLY ON YOUTUBE

      4. to my surprise 1.3 SRM is still not an option when trying to upgrade the RT2600AC and MR2200AC using the automatic upgrade. However, if you go to the Synology download centre enter your current model number, and DSM version you can install the relevant PAT files manually. Long winded, but I now have 1.3 running on both devices.
        REPLY ON YOUTUBE

      5. Bought this off your recommendation and am a bit disappointed.. not being able to granularly set times for websites makes this unsatisfactory. This device is clearly capable of so much more

        REPLY ON YOUTUBE

      6. Hello… I have a concern about making ipv6 work on this router… I mention that the ISP assigned me a native address (the connection is made via PPPoE)…. I tried all the options to make it work and I didn’t succeed, but I still succeeded with 6to4, which doesn’t delight me. Is there any option to go in Native mode or is it a system problem? Thank you in advance.
        REPLY ON YOUTUBE

      7. So … I just got one for our small business.

        Long story: Our existing WiFi access point went out three years ago and it was situation critical to replace it. So I picked up the only cheap consumer AP they had at BestBuy and set it up. It worked. We used it the past 3 years. But lately I had difficulty adding clients as the AP was tapped out. So … I decided to give the RT6600ax a try based on my satisfaction with other Synology products.

        Short story: We love it. It was easy to set up and provides a lot of both security and control.
        REPLY ON YOUTUBE

      8. Trying to decide between this synolovy vs the ax86u/gt – ax6000…. Any comments? I can get the 86 for a 100 euros cheaper. I am rooting for the synolgogy given I have two syno NAS home with whome I been quite happy. I can get the 6000 for the same price as the synology.
        REPLY ON YOUTUBE

      9. Very helpful! Do I understand you correctly that I can create multiple wireless networks (say 1 private and 1 for guests) and then assign Schedule and Content filtering to only one of those wireless networks? I assume devices connected to one network cannot see the devices connected to the other? I’m trying to find basically that exact feature to have a guest network for foster children in the home. Could I even assign a separate DNS server to those networks to implement parental controls with something like OpenDNS?
        REPLY ON YOUTUBE

      10. Dude this is all old and familiar features and ways to use their router. Most already know this. I thought this was going to be a video to point out the differences of the 6600 over the 2600. This video is mainly restating of stuff we already know
        REPLY ON YOUTUBE

      11. Anyone have any idea on what you upgrade first? Have existing Mesh with 2600 and 2200 running SRM 1.2.

        Do I Upgrade the 2600 first or the 2200 please? Surely upgrading the 2600 to 1.3 would render the 2200 unable to connect and incompatible?

        Any help appreciated.. 🙂
        REPLY ON YOUTUBE

      12. They also removed features like wireless repeater mode and didn’t say nothing. That mode was one of the reasons I purchased the router and now you can’t go back to 1.2. Never again will I buy from Synology.
        REPLY ON YOUTUBE

      13. I think the MR2200’s connection issues are a 1.3 issue. Mine have been dropping off about once a week and I’m still on the 2600ac, not only that, but their light patterns have been behaving very strangely. Like they’re connected, but every now and then, the WiFi symbol will scroll the lights from bottom to top for 20min, and then go back to normal.
        REPLY ON YOUTUBE

      14. Hi Rob. Ive been a subscriber for many years, your videos have helped me
        to decide to buy many Synology nas units, my first being the ds212plus
        my latest the ds1821plus. Like you I`m from the uk so I`m hoping you
        can help me with a question I cant get my head around.

        My internet currently comes from Plusnet with an adsl connection/router
        that as you know comes down the standard phone line connector (via that splitter/filter).
        This router has a single Cat5e cable connected to my Q-Nap QSW-M408C, then around the house
        to all the pc`s nas etc with Cat5e or Cat6.

        Plusnet have just offered me FTTP so I`m hoping to upgrade in September. And after watching
        your video on the Synology RT6600ax with its Vlan feature I would love to buy this and setup
        two Vlans, one for all my devices and the second separate Vlan for my Kids stuff.
        (I do not want my Kids having access to my shared folders etc)

        What I do understand is that once FTTP is installed this new connection is just a standard
        Cat5 or Cat6 Cable that connects to the Wan socket on a router.

        But what i`m not clear on is this:

        Does the RT6600ax completely replace the Plusnet router?? and if your answer is yes, do I
        need to setup into the Synology RT6600ax settings some sort of the old Plusnet/Connection
        /account/username stuff like I had to with my Adsl router??

        I assume Plusnet will send me a pre configured FTTP router and my Best guess would be I do not use
        this Isp router at all. The Synology router will just connect to the internet in its place
        without the older Plusnet/Connection/account/username etc settings. And then just leave me to setup
        its DHCP, Lan, Vlan stuff myself?

        The above might sound like a silly question but after spending a lifetime buying my own Dialup modems
        (first modem was 9600, 14,4 then 28.8k) and then plenty of Netgear adsl routers over the years the one constant
        headache was trying to get the correct login settings to work, since most normal people just used the
        pre configured hardware.

        I will appreciate any ideas yourself any anybody else has. Many Thanks F S
        REPLY ON YOUTUBE

      15. Been using Asus routers for about a decade. Ordered this Synology rooter tonight to upgrade from my Asus Ac2900 and after watching this video I think I made a good choice.
        REPLY ON YOUTUBE

      16. Thanks for the comprehensive review. All the infomation I needed. I’d buy one in a heartbeat but until they support my exisitng Synolgy mesh I’ll have to wait.
        REPLY ON YOUTUBE

      17. Great video … as usual. Based on your previous review of Synology’s RT6600ax, I recently bought one (yeah… tough to locate one in Spain) and have been THOUROUGHLY impressed. So my comments are really directed at both reviews. As I work my way through all the rich features of SRM 1.3, this deep dive has been wonderful and helped me close down a few missed security holes.

        While the RT6600ax didn’t provide as good of a range boost over my ISP’s LiveBox 6+ as I hoped nor did it fix the intermittent service problems I have (which Orange tech support keeps claiming is how and where I have the router it installed), the control and security of SRM has more than made up for it. It is the proverbial light years ahead of what Orange offers in their residential router.

        I know this is a review and comparison channel and less a “how to”. However, I’d love to see a more in-depth connection/setup/security video as I did have a little trouble trying to connect and set up the RT6600ax. Not Synology’s fault but the limitations introduced by my ISP and their router limitations. Initially, I was hoping I could connect it directly to the ONT but it seems I don’t have the technical wherewithal to figure that out. I hoped the LiveBox could be set up as a bridge, but that option is not immediately available. I then tried connecting to the LiveBox router and setting up as an Access Point. That sort of worked but was pissed that I couldn’t use all the features of SRM. I then tried connecting to the ISP’s router using the Wireless Router operating mode but, as to be expected, ran into double NAT issues. I finally had to set up a DMZ on my LiveBox and pointed it to the RT6600ax. This seems to work as I have not had problems so far. However, I am not yet sure if opening a DMZ is an inherent risk (I would love feedback on this option). However, one would assume using a router with firewall rules enabled in a DMZ is probably one of the safer options.

        So my next comment is with regards to the Threat Prevention feature of SRM. To see the attacks and where your vulnerabilities lie is both a blessing and a curse. Of course, with my ISP’s router, there is nothing of this reporting. I guess the average person just assumes and accepts that they are safe behind the router provided the ISP… and maybe they are. However, when you can actually see the types of “Malicious Events” available in the Threat Prevention app (e.g. Network Trojans, Attempted Information Leaks), where they are coming from, and the intensity/frequency, I am left a little shell shocked and worried. It is like watching the news… the more bad things you see happening around you, the more anxiety and fear you feel. If I just play naive and ignore that there are bad elements out there, as happens with your ISPs router, I can just live happily in my little bubble and not worry about bad things until there is a problem. So, a more deep dive on how to handle the threat reporting in SRM and steps you can take to harden your system would be much appreciated.

        So again, great video and if anyone has references, advice and help for points raised above, I would love to hear about it.
        REPLY ON YOUTUBE

      18. My new rt6600ax refuses to go above 100Mbps download, and suggests (via popup in SRM) it may be the cable. My older router (which this one is supposed to replace) is getting nearly 500Mbps download on my 16″ macbook pro m1 ultra, and my synology NAS is showing around 940Mbps on ethernet (again, on the older router). But on the new 6600, my NAS via ethernet is maxing at around 94Mbps 🙁 Any ideas? Very frustrating.
        REPLY ON YOUTUBE

      19. Hi there,
        Thanks a lot. So after your review i bought the RT6600ax. So now i need to upgrade my home network to manage and separate my iot network (home assistant, cam, aquara, shelly, etc.) from my home / work network. Can you help on guiding me to choose a switch (i guess it will be managed) and give so hints on configuration (both the router & the switch). Maybe i should add that today y network is build on the RT2600 plus 2 MR2200 because of concrete.
        Philippe
        REPLY ON YOUTUBE

      20. Does the dns package support local network dns entries? I currently use ddwrt and have local dns records configured for a few server IPs
that way my desktop and mobile clients can connect to files and emails using those fqdn names locally
        REPLY ON YOUTUBE

      21. Does the dns package support local network dns entries? I currently use ddwrt and have local dns records configured for a few server IPs
that way my desktop and mobile clients can connect to files and emails using those fqdn names locally
        REPLY ON YOUTUBE

      22. The biggest flaw in synology product line – its not complete. No switches. No PoE. this router show again cheap plastic 4 port ethernet on the back. There is no way to build even small size home network with just router. They should add two 12/24 port switches, with/without PoE and SFP support running the same software. together with NAS they can have a good solution
        REPLY ON YOUTUBE

      23. The biggest flaw in synology product line – its not complete. No switches. No PoE. this router show again cheap plastic 4 port ethernet on the back. There is no way to build even small size home network with just router. They should add two 12/24 port switches, with/without PoE and SFP support running the same software. together with NAS they can have a good solution
        REPLY ON YOUTUBE

      24. The biggest flaw in synology product line – its not complete. No switches. No PoE. this router show again cheap plastic 4 port ethernet on the back. There is no way to build even small size home network with just router. They should add two 12/24 port switches, with/without PoE and SFP support running the same software. together with NAS they can have a good solution
        REPLY ON YOUTUBE

      25. Ill agree to a Great rewiew, and you have mentioned a lot of things which are really helpfull (not for me) but for other sure.
        What i want to comment on, is your surprise that the RT6600ax comes with the SRM 1.3 and the older devices are still SRM 1.2, well this is what synology was presenting from the “Day One” when the RT6600 was presented by end of 2021 so no surprise for me here, the SRM 1.3 for the RT2600 and MR2200 will be or according to synology should be in June so we need to wait for this one as well.
        What im glad and really glad that the support for the MR2200 and the mesh is there, and also with another RT6600, which you cannot do with a RT2600 so a huge step forward i like, AAAANND well if you do a MESH then you will have TWO USB ???? Ports, the question is if the can be used but i think this is an alternative for those who will be having a MESH network.
        REPLY ON YOUTUBE

      26. Ill agree to a Great rewiew, and you have mentioned a lot of things which are really helpfull (not for me) but for other sure.
        What i want to comment on, is your surprise that the RT6600ax comes with the SRM 1.3 and the older devices are still SRM 1.2, well this is what synology was presenting from the “Day One” when the RT6600 was presented by end of 2021 so no surprise for me here, the SRM 1.3 for the RT2600 and MR2200 will be or according to synology should be in June so we need to wait for this one as well.
        What im glad and really glad that the support for the MR2200 and the mesh is there, and also with another RT6600, which you cannot do with a RT2600 so a huge step forward i like, AAAANND well if you do a MESH then you will have TWO USB ???? Ports, the question is if the can be used but i think this is an alternative for those who will be having a MESH network.
        REPLY ON YOUTUBE

      27. Ill agree to a Great rewiew, and you have mentioned a lot of things which are really helpfull (not for me) but for other sure.
        What i want to comment on, is your surprise that the RT6600ax comes with the SRM 1.3 and the older devices are still SRM 1.2, well this is what synology was presenting from the “Day One” when the RT6600 was presented by end of 2021 so no surprise for me here, the SRM 1.3 for the RT2600 and MR2200 will be or according to synology should be in June so we need to wait for this one as well.
        What im glad and really glad that the support for the MR2200 and the mesh is there, and also with another RT6600, which you cannot do with a RT2600 so a huge step forward i like, AAAANND well if you do a MESH then you will have TWO USB ???? Ports, the question is if the can be used but i think this is an alternative for those who will be having a MESH network.
        REPLY ON YOUTUBE

      28. Amazing review. Thanks a lot for your effort. It’s almost like we’re dealing with a Nas Station here. In terms of user experience anyway. I think if they added Plex, a lot of basic users wouldn’t have bought a Nas Station anymore, so I think is is a selling strategy here. Anyway, great review, I am considering buying an unit after watching your video. Well done mate! Keep up the good work!
        REPLY ON YOUTUBE

      29. Amazing review. Thanks a lot for your effort. It’s almost like we’re dealing with a Nas Station here. In terms of user experience anyway. I think if they added Plex, a lot of basic users wouldn’t have bought a Nas Station anymore, so I think is is a selling strategy here. Anyway, great review, I am considering buying an unit after watching your video. Well done mate! Keep up the good work!
        REPLY ON YOUTUBE

      30. Amazing review. Thanks a lot for your effort. It’s almost like we’re dealing with a Nas Station here. In terms of user experience anyway. I think if they added Plex, a lot of basic users wouldn’t have bought a Nas Station anymore, so I think is is a selling strategy here. Anyway, great review, I am considering buying an unit after watching your video. Well done mate! Keep up the good work!
        REPLY ON YOUTUBE

      31. Looks fantastic. As mentioned previously, I am using a net gear R9000 which to be fair has been working brilliantly. I flashed it with DDWRT recently using my iPad Pro, it took an absolute age to login but finally it worked. I am registered as a blind person but enjoy fiddling around with technology. I am waiting for your video next week for The router shootout vid but, am quite taken with the RTÉ 6600.
        Thank you for all of your videos they are very helpful
        REPLY ON YOUTUBE

      32. Looks fantastic. As mentioned previously, I am using a net gear R9000 which to be fair has been working brilliantly. I flashed it with DDWRT recently using my iPad Pro, it took an absolute age to login but finally it worked. I am registered as a blind person but enjoy fiddling around with technology. I am waiting for your video next week for The router shootout vid but, am quite taken with the RTÉ 6600.
        Thank you for all of your videos they are very helpful
        REPLY ON YOUTUBE

      33. Looks fantastic. As mentioned previously, I am using a net gear R9000 which to be fair has been working brilliantly. I flashed it with DDWRT recently using my iPad Pro, it took an absolute age to login but finally it worked. I am registered as a blind person but enjoy fiddling around with technology. I am waiting for your video next week for The router shootout vid but, am quite taken with the RTÉ 6600.
        Thank you for all of your videos they are very helpful
        REPLY ON YOUTUBE

      34. Synology does produce nice devices but it’s all fine when you have warranty. When it’s over and your device will stop working, synology won’t repair it even if you could just pair for the repair. They just dont give a f**k. Think twice before you buy an synology router.
        REPLY ON YOUTUBE

      35. Synology does produce nice devices but it’s all fine when you have warranty. When it’s over and your device will stop working, synology won’t repair it even if you could just pair for the repair. They just dont give a f**k. Think twice before you buy an synology router.
        REPLY ON YOUTUBE

      36. Synology does produce nice devices but it’s all fine when you have warranty. When it’s over and your device will stop working, synology won’t repair it even if you could just pair for the repair. They just dont give a f**k. Think twice before you buy an synology router.
        REPLY ON YOUTUBE

      37. This looks like an unboxing, not an actual review. You’re holding a device that is capable of sophisticated beam-forming, but we don’t have any speed tests / comparisons / ping results for a typical wood-frame house for example. I like the new features, but I was really into that I’d just set up a pfSense box, or a UDM pro. Why would I buy this thing instead of a cheaper WiFi6 AP/router? Why would I buy it instead of a UDM pro + AP? I had an ac2200 before and I returned it, because SRM is a far cry from DSM, and here they are cramming features into a device with just 1GB of RAM. If you’re saying that it strikes the perfect balance, I’d like to see come figures proving that. Otherwise the video should be titled either “unboxing” or “first impressions”.
        REPLY ON YOUTUBE

      38. This looks like an unboxing, not an actual review. You’re holding a device that is capable of sophisticated beam-forming, but we don’t have any speed tests / comparisons / ping results for a typical wood-frame house for example. I like the new features, but I was really into that I’d just set up a pfSense box, or a UDM pro. Why would I buy this thing instead of a cheaper WiFi6 AP/router? Why would I buy it instead of a UDM pro + AP? I had an ac2200 before and I returned it, because SRM is a far cry from DSM, and here they are cramming features into a device with just 1GB of RAM. If you’re saying that it strikes the perfect balance, I’d like to see come figures proving that. Otherwise the video should be titled either “unboxing” or “first impressions”.
        REPLY ON YOUTUBE

      39. This looks like an unboxing, not an actual review. You’re holding a device that is capable of sophisticated beam-forming, but we don’t have any speed tests / comparisons / ping results for a typical wood-frame house for example. I like the new features, but I was really into that I’d just set up a pfSense box, or a UDM pro. Why would I buy this thing instead of a cheaper WiFi6 AP/router? Why would I buy it instead of a UDM pro + AP? I had an ac2200 before and I returned it, because SRM is a far cry from DSM, and here they are cramming features into a device with just 1GB of RAM. If you’re saying that it strikes the perfect balance, I’d like to see come figures proving that. Otherwise the video should be titled either “unboxing” or “first impressions”.
        REPLY ON YOUTUBE

      40. I just want to know if I connect a 2.5GB NAS to that 2.5GB LAN port of the Synology, I get speeds between the NAS and the client above 1GB over WIFI6E, thanks.
        REPLY ON YOUTUBE

      41. I just want to know if I connect a 2.5GB NAS to that 2.5GB LAN port of the Synology, I get speeds between the NAS and the client above 1GB over WIFI6E, thanks.
        REPLY ON YOUTUBE

      42. I just want to know if I connect a 2.5GB NAS to that 2.5GB LAN port of the Synology, I get speeds between the NAS and the client above 1GB over WIFI6E, thanks.
        REPLY ON YOUTUBE

      43. When the videos get this long ( which I do very much appreciate ), I head straight to the conclusion. If you conclusion is positive, I generally go back to the beginning. That’s what I’m doing here. Your opinion at the end is exactly what some of us need. I currently have an RT2600ac but now I will buy a new 6600 model and use the 2600 as an access point in the upstairs of my home. Many thanks for all of the time that you put into these reviews.
        REPLY ON YOUTUBE

      44. When the videos get this long ( which I do very much appreciate ), I head straight to the conclusion. If you conclusion is positive, I generally go back to the beginning. That’s what I’m doing here. Your opinion at the end is exactly what some of us need. I currently have an RT2600ac but now I will buy a new 6600 model and use the 2600 as an access point in the upstairs of my home. Many thanks for all of the time that you put into these reviews.
        REPLY ON YOUTUBE

      45. When the videos get this long ( which I do very much appreciate ), I head straight to the conclusion. If you conclusion is positive, I generally go back to the beginning. That’s what I’m doing here. Your opinion at the end is exactly what some of us need. I currently have an RT2600ac but now I will buy a new 6600 model and use the 2600 as an access point in the upstairs of my home. Many thanks for all of the time that you put into these reviews.
        REPLY ON YOUTUBE

      46. Is it possible to create “Web Filter” on a schedule? For example from 4PM to 8PM can be a “homework” time slot where only allowed whitelisted websites are available?
        REPLY ON YOUTUBE

      47. Is it possible to create “Web Filter” on a schedule? For example from 4PM to 8PM can be a “homework” time slot where only allowed whitelisted websites are available?
        REPLY ON YOUTUBE

      48. Is it possible to create “Web Filter” on a schedule? For example from 4PM to 8PM can be a “homework” time slot where only allowed whitelisted websites are available?
        REPLY ON YOUTUBE

      49. That’s for a great review. Worth watching it all. Look forward to future videos on this router.

        Three questions; Do you think Synology will release a WiFi 6 upgrade to the MR2200ac? Maybe an MR6600ax?

        Also, can devices be assigned a frequency? Orbi takes control of that an many times connects 5GHz devices (like FireTV) to 2.4GHz when only in the next room. ????????‍♂

        Lastly, I’m sure the answer is yes, but I didn’t see it covered, can you assign static IP’s or reserve IP’s for devices?

        Thanks again! I really love the ability to create a VLAN that merges with an SSID to isolate my IoT.
        REPLY ON YOUTUBE

      50. That’s for a great review. Worth watching it all. Look forward to future videos on this router.

        Three questions; Do you think Synology will release a WiFi 6 upgrade to the MR2200ac? Maybe an MR6600ax?

        Also, can devices be assigned a frequency? Orbi takes control of that an many times connects 5GHz devices (like FireTV) to 2.4GHz when only in the next room. ????????‍♂

        Lastly, I’m sure the answer is yes, but I didn’t see it covered, can you assign static IP’s or reserve IP’s for devices?

        Thanks again! I really love the ability to create a VLAN that merges with an SSID to isolate my IoT.
        REPLY ON YOUTUBE

      51. That’s for a great review. Worth watching it all. Look forward to future videos on this router.

        Three questions; Do you think Synology will release a WiFi 6 upgrade to the MR2200ac? Maybe an MR6600ax?

        Also, can devices be assigned a frequency? Orbi takes control of that an many times connects 5GHz devices (like FireTV) to 2.4GHz when only in the next room. ????????‍♂

        Lastly, I’m sure the answer is yes, but I didn’t see it covered, can you assign static IP’s or reserve IP’s for devices?

        Thanks again! I really love the ability to create a VLAN that merges with an SSID to isolate my IoT.
        REPLY ON YOUTUBE

      52. The usual lan limitation of all router you have only one 2.5gbe port. Now a router should have at least one 2.5 gbe (Better 5gbe as in Italy a phone company started to sell a FTTH 5gbe fiber connection at a good price in selected city) wan AND one 2.5 lan port (better 5gbe) and let a multi-g switch to manage the signal. Also it should manage analog phone otherwise we must pay for the router that provider offer
        REPLY ON YOUTUBE

      53. The usual lan limitation of all router you have only one 2.5gbe port. Now a router should have at least one 2.5 gbe (Better 5gbe as in Italy a phone company started to sell a FTTH 5gbe fiber connection at a good price in selected city) wan AND one 2.5 lan port (better 5gbe) and let a multi-g switch to manage the signal. Also it should manage analog phone otherwise we must pay for the router that provider offer
        REPLY ON YOUTUBE

      54. The usual lan limitation of all router you have only one 2.5gbe port. Now a router should have at least one 2.5 gbe (Better 5gbe as in Italy a phone company started to sell a FTTH 5gbe fiber connection at a good price in selected city) wan AND one 2.5 lan port (better 5gbe) and let a multi-g switch to manage the signal. Also it should manage analog phone otherwise we must pay for the router that provider offer
        REPLY ON YOUTUBE

      55. Very interesting review so thank you. You say you will be reviewing the Asus RT AX series….will you be doing this one?
        ASUS RT-AX89X 12-Stream AX6000 Dual Band Wi-Fi 6 802.11ax Router
        Cheers
        REPLY ON YOUTUBE

      56. Very interesting review so thank you. You say you will be reviewing the Asus RT AX series….will you be doing this one?
        ASUS RT-AX89X 12-Stream AX6000 Dual Band Wi-Fi 6 802.11ax Router
        Cheers
        REPLY ON YOUTUBE

      57. Very interesting review so thank you. You say you will be reviewing the Asus RT AX series….will you be doing this one?
        ASUS RT-AX89X 12-Stream AX6000 Dual Band Wi-Fi 6 802.11ax Router
        Cheers
        REPLY ON YOUTUBE

      58. Felicidades, es un buen ejemplo.
        250 sentadillas son unos 4.FO/L-J27g1 muchas y un buen ejercicio.
        5:25 Se deja ver que hay muy buenos resultados ????????

        Saludos desde la Cd.. de world ????????????
        los mortales abian apreciado tan hermosa mujer.
        REPLY ON YOUTUBE

      59. Felicidades, es un buen ejemplo.
        250 sentadillas son unos 4.FO/L-J27g1 muchas y un buen ejercicio.
        5:25 Se deja ver que hay muy buenos resultados ????????

        Saludos desde la Cd.. de world ????????????
        los mortales abian apreciado tan hermosa mujer.
        REPLY ON YOUTUBE

      60. Felicidades, es un buen ejemplo.
        250 sentadillas son unos 4.FO/L-J27g1 muchas y un buen ejercicio.
        5:25 Se deja ver que hay muy buenos resultados ????????

        Saludos desde la Cd.. de world ????????????
        los mortales abian apreciado tan hermosa mujer.
        REPLY ON YOUTUBE

      61. Hey
        Thanks so much for this very informative Video! 2 Questions though:
        1. Can you connect the router to a VPN, so your whole home internet traffic is secure? If so, what VPNs can be used?
        2. As some might know, wireguard is a very simple, fast and secure VPN solution. Is it possible to run wireguard as a server or as a client on this router? If there’s a option to install packages, really one should be able to potentially develop or manually install the option for wireguard as a client and perhaps even as a wireguard VPN server…..

        Many thanks!
        REPLY ON YOUTUBE

      62. Hey
        Thanks so much for this very informative Video! 2 Questions though:
        1. Can you connect the router to a VPN, so your whole home internet traffic is secure? If so, what VPNs can be used?
        2. As some might know, wireguard is a very simple, fast and secure VPN solution. Is it possible to run wireguard as a server or as a client on this router? If there’s a option to install packages, really one should be able to potentially develop or manually install the option for wireguard as a client and perhaps even as a wireguard VPN server…..

        Many thanks!
        REPLY ON YOUTUBE

      63. Hey
        Thanks so much for this very informative Video! 2 Questions though:
        1. Can you connect the router to a VPN, so your whole home internet traffic is secure? If so, what VPNs can be used?
        2. As some might know, wireguard is a very simple, fast and secure VPN solution. Is it possible to run wireguard as a server or as a client on this router? If there’s a option to install packages, really one should be able to potentially develop or manually install the option for wireguard as a client and perhaps even as a wireguard VPN server…..

        Many thanks!
        REPLY ON YOUTUBE

      64. Great review – thank you. Is there any way to limit the internet bandwidth available to a specific user / device or IP range? I usually allocate only 80% of the available internet bandwidth to make sure that no single user or device hogs all the bandwidth and that my downloads always have bandwidth available without impacting anyone else.
        REPLY ON YOUTUBE

      65. Great review – thank you. Is there any way to limit the internet bandwidth available to a specific user / device or IP range? I usually allocate only 80% of the available internet bandwidth to make sure that no single user or device hogs all the bandwidth and that my downloads always have bandwidth available without impacting anyone else.
        REPLY ON YOUTUBE

      66. Great review – thank you. Is there any way to limit the internet bandwidth available to a specific user / device or IP range? I usually allocate only 80% of the available internet bandwidth to make sure that no single user or device hogs all the bandwidth and that my downloads always have bandwidth available without impacting anyone else.
        REPLY ON YOUTUBE

      67. Loved my 2600ac and as a Parent it allowed me to easily be a truly evil bastard cutting off internet to all my sons devices when he was in trouble and at bedtime with a schedule 😉
        REPLY ON YOUTUBE

      68. Loved my 2600ac and as a Parent it allowed me to easily be a truly evil bastard cutting off internet to all my sons devices when he was in trouble and at bedtime with a schedule 😉
        REPLY ON YOUTUBE

      69. Loved my 2600ac and as a Parent it allowed me to easily be a truly evil bastard cutting off internet to all my sons devices when he was in trouble and at bedtime with a schedule 😉
        REPLY ON YOUTUBE

      70. Thank you for this review. I didn’t know that buying this one to replace RT2600 would render my 2200 MESH obsolete until SRM1.3 support. Just saved me a lot of money.
        REPLY ON YOUTUBE

      71. Thank you for this review. I didn’t know that buying this one to replace RT2600 would render my 2200 MESH obsolete until SRM1.3 support. Just saved me a lot of money.
        REPLY ON YOUTUBE

      72. About the USB port thing: while an extra cost, sure, is it possible to purchase a little USB hub, plug that in, and then plug multiple HDDs, a 4G dongle, etc.?
        REPLY ON YOUTUBE

      73. About the USB port thing: while an extra cost, sure, is it possible to purchase a little USB hub, plug that in, and then plug multiple HDDs, a 4G dongle, etc.?
        REPLY ON YOUTUBE

      74. I have a Net Gear r9000 x10, do you think this rt6600 would be a good upgrade? R9000 has started dropping Wi-Fi and kicking me out of plex, on paper they seem to have similar specs, although net gear have tried to kill the router with firmware numerous times.
        REPLY ON YOUTUBE

      75. I have a Net Gear r9000 x10, do you think this rt6600 would be a good upgrade? R9000 has started dropping Wi-Fi and kicking me out of plex, on paper they seem to have similar specs, although net gear have tried to kill the router with firmware numerous times.
        REPLY ON YOUTUBE

      76. Great video. Btw, note that 3G/4G dogles are at EOL support by SRM (as per the Synology Compatibility List) so I am not sure how viable alternative one has for a backup WAN connection.
        REPLY ON YOUTUBE

      77. Great video. Btw, note that 3G/4G dogles are at EOL support by SRM (as per the Synology Compatibility List) so I am not sure how viable alternative one has for a backup WAN connection.
        REPLY ON YOUTUBE

      78. Just wondering. The new software disabled support for 4G dongle. But I noticed in your video around minute 31.45 that there is a mobile network section in the settings.

        I hope I can use my SIM with dongle. Been wanting to switch to Synology router for the longest time but couldn’t due to the poor support for SIM card.
        REPLY ON YOUTUBE

      79. Just wondering. The new software disabled support for 4G dongle. But I noticed in your video around minute 31.45 that there is a mobile network section in the settings.

        I hope I can use my SIM with dongle. Been wanting to switch to Synology router for the longest time but couldn’t due to the poor support for SIM card.
        REPLY ON YOUTUBE

      80. Thanks for the thorough review but this is too little too late from Synology as an existing customer… I welcome SRM 1.3 VLAN and multiple SSID but these were promised and should have been out several years ago however they stalled SRM development to focus on DSM7. It has left a really sour taste in my mouth as I invested heavily with RT2600ac and 2x MR2200ac (along with multiple NAS) but have had to relegate the RT2600ac to just doing WiFi as an access point because of all bugs and the lack of development. I’m now using a PFsense router which is far more stable and has had better features, scalability and resilience for years. I’ll look at SRM 1.3 when it lands for my existing devices but when it is time to upgrade my mesh WiFi hardware I have no loyalty to Synology or confidence in their support for their network devices so i’ll be looking at other offerings.
        REPLY ON YOUTUBE

      81. Thanks for the thorough review but this is too little too late from Synology as an existing customer… I welcome SRM 1.3 VLAN and multiple SSID but these were promised and should have been out several years ago however they stalled SRM development to focus on DSM7. It has left a really sour taste in my mouth as I invested heavily with RT2600ac and 2x MR2200ac (along with multiple NAS) but have had to relegate the RT2600ac to just doing WiFi as an access point because of all bugs and the lack of development. I’m now using a PFsense router which is far more stable and has had better features, scalability and resilience for years. I’ll look at SRM 1.3 when it lands for my existing devices but when it is time to upgrade my mesh WiFi hardware I have no loyalty to Synology or confidence in their support for their network devices so i’ll be looking at other offerings.
        REPLY ON YOUTUBE