Big Hard Drives vs More Hard Drives – Which Is Better?

Should You Use Fewer Larger HDDs or More Smaller HDDs?

The technology behind hard drives has evolved RAPIDLY! In just the last few years we have seen HDDs hit over 20 terabytes, seen the number of platters being squeezed into a single hard drive casing reach more than 10 and the performance and durability of these drives somehow continue to improve too! Still, one area that we have seen very little change in over the years is the price per terabyte of most HDDs. Despite the range of capacities available from most HDD brands (Seagate, WD, Toshiba, etc), the cost of the latest and largest HDDs still maintains a hefty price tag, whilst the smaller capacity drives (still broadly keeping their lower price point) are more readily available, occasionally on offer and this leads alot of data storage buyers to ask themselves – Is it better to buy a small number of MASSIVE hard drives or a larger number of SMALLER HDDs? Thanks to modern development and efficient evolution of RAID (redundant array of independent disk) management in NAS and DAS systems*, alongside storage enclosures now ranging from as little as 2 Bay desktop case scale all the way upto 24-60 Bay rackmounts, it is actually quite easy to achieve the same amount of capacity of a handful of ‘max capacity’ drives with a smaller cluster of more affordable smaller drives. So, today I want to look into the benefits/downfalls of either setup and hopefully help you decide whether you need to opt for bigger or smaller hard drives in your data storage setup in 2023 onwards.

Note – If you are looking for the Best Price per Terabyte of any Hard Drive from WD or Seagate, you can use our HDD comparison tool that will provide you with the best hard drive for your needs if you want to use X number of drives, have at least X amount of storage, using X type of RAID and/or spend X amount of money. Find out more about the tool and how to use it HERE – https://nascompares.com/2022/12/28/how-to-choose-the-best-value-hard-drive-and-best-price-per-tb-get-it-right-first-time

*NAS = Network Attached Storage, always featuring RAID management onboard. DAS = Direct Attached Storage, with them either having on-board/hardware-RAID or will be JBOD (Just a Bunch of Drives) that needs your host computer to set up and maintain the RAID

Why Should You Use A Larger Quantity of Smaller Capacity Hard Drives

So, first up, lets discuss the advantages of opting for a larger number of smaller capacity hard drives in a RAID in your NAS/DAS system. It is worth remembering that when I am discussing smaller capacity HDDs, that (in order to keep things simple to differentiate) I am classing any HDD 1-10TB as ‘smaller’ capacity and 12-22TB (with 24TB and 26TB arriving quite soon) as ‘large’ capacity. So, lets discuss why you might want to go high volume, low capacity!

More HDDs Can Cost less than fewer larger HDDs in the right RAID Configuration

A massively overlooked advantage when it comes to choosing a larger number of smaller capacity HDDs is that, thanks to the development of RAID technology, you can often save a good 10-15% of the cost of your data storage media by choosing a RAID 5 configuration of smaller HDDs, rather than a RAID 1 with smaller drives. Larger HDDs (which already cost significantly more, but are similar in price per TB broadly) provide you with a HUGE amount of storage space. However, because of the importance of your data (home or business), you are going to need to factor in things like backups and redundancy*. If you are buying at least 1x MASSIVE 20TB or 22TB hard drive, then you have to accept that you are going to buy AT LEAST 1 more (to act as a backup or for redundancy in a RAID 1). Below is a breakdown of the pricing of WD Red Pro and Seagate Ironwolf Regular NAS Hard Drives (enterprise/pro drives have a higher build standard, faster, longer warranty and ultimate around £30-50 more than their non-pro alternatives):

Cost of NAS Hard Drives in Jan 2023 (5/1/23)
Seagate Ironwolf HDDs (Regular) WD Red Pro HDDs (Pro Series)
1TB – $35
2TB – $65
4TB – $105
6TB – $158
8TB – $177
10TB – $224
12TB – $258
14TB – $271
16TB – $309
18TB – $389
4TB – $140
6TB – $173
8TB – $215
10TB – $245
12TB – $253
14TB – $270
16TB – $298
18TB – $349
20TB – $419
22TB – $551

In most cases, the price per terabyte on both sides will remain largely consistent at each capacity. HOWEVER, when you start putting these drives into a NAS/DAS enclosure and acting in the RAID configuration, it soon becomes apparent that the ben efits in Drive #s in a RAID 1 vs a RAID 5 immediately show a saving in almost every single capacity the smaller you go! Below are two examples of achieving 12TB in a NAS enclosure using RAID 1 vs using RAID 5 (so, still maintaining 1 disk drive failure protection and having 12TB of storage to use):

12TB Storage in a RAID 1 MIRROR 12TB Storage in a RAID 5

So, often, it can work out cheaper to purchase multiple smaller hard drives rather than fewer larger HDDs in order to hit certain capacity levels, whilst still maintaining an identical level of redundancy. This does mean you will need to choose a NAS of a larger bay number/size, ut more on that later.

*Backups and redundancy should not be confused as the same thing! Backups are a complete copy of the same data in a different location (physically, ideally). Redundancy can be thought of as a safety net. In a RAID (in most cases) you will have to supply enough media/space to facilitate the system keep your data intact in the event of a mechanical drive failure. Redundancy is NOT a backup, because it is in the same physical computer location and intertwined with the primary storage – so lose/break the NAS/DAS and redundancy is useless!

Bigger HDDs Can result in ‘all eggs in one basket’ issue

Possibly one of the early benefits of RAID (aside from benefits in larger storage in general) was to ensure that your storage had that safety net in place to withstand a drive failure. HDDs are like any other kind of mechanical technology and as soon as you introduce moving parts, pressure, workloads over years and electricity to run, you are immediately going to have to accept that they are open to one day breaking down. However, larger capacity HDDs (in particular larger capacity drives used in smaller RAID/deployment configurations) introduce the ‘all eggs in one basket’ principle. If you have a HUGE amount of data in one single container, that means that just that 1 container has to fail to lose EVERYTHING! There are arguments for and against having this single-layer failure point vs the statistics of a multi-point of failure setup (will touch on that later), but bigger hard drives and the immediate necessity to double that capacity in RAID/Backups can be daunting enough for some more cost aware users to cut corners in their data storage setup (perhaps being a bit casual in their data storage retention and depth policies). Opting for multiple drives in smaller capacities means that although you have multiple drives instead of one, that your data is a little more spread out. There IS a counterargument to this but I will touch on that later.

Smaller Capacity HDDs are more regularly on SALE

This one is a little more obvious than the differences in RAIDD configs and capacity we have already covered. Smaller capacity HDDs have a higher chance to be on offer at retailers than larger capacity drives (by quite a noticeable margin!). This is down to three main reasons:

  • Smaller capacity HDDs have been available for a longer amount of time in the market and can therefore extend to more creative pricing
  • Smaller capacity HDDs, because of their longer amount of time since release, have larger stock available post-manufacture and that means the buy/sell demand is a little more favourable to the buyer
  • Smaller capacity HDDs often require less hardware resources in their production than larger capacity HDDs with their more enterprise/pro design in line with improved R&D

Ultimately, this means that smaller-capacity HDDs are more regularly on offer than their larger-capacity alternatives. In particular, 4TB, 6TB and 8TB HDDs are often found on promotion at the majority of retailers and when you fact that in with the benefits of RAID 5 vs RAID 1 in your configuration, this can all add up to real savings. Here are a few examples from very recently:

Larger capacity HDDs are occasionally on offer, however, these are far, far less frequent and rarely see the price drops found in the smaller capacities (outside of big, BIG sales such as Black Friday)

More HDDs in a RAID (almost) Always results in Higher Performance

Another big, big benefit of using multiple smaller HDDs in a larger RAID config compared with larger HDDs in a smaller RAID is to do with performance. Depending on the number of drives in the RAID, you can see some fantastic improvements in performance. Years ago, RAID configurations such as RAID 5 and RAID 6 were seen to have a performance penalty because of the extra work being done by the CPU/Resources of the NAS keeping them running smoothly and safely. However, in recent years thanks to the improvements in NAS CPUs being used and the software that is running on them, RAID 5/6 doesn’t have anywhere near the performance loss it once did. In fact, RAID 5 and RAID  6 can grant you some great benefits. This is thanks to a RAID allowing read and write activity being spread across multiple disks at once (as opposed to a single drive being accessed in a normal 1 drive setup). Different RAID configurations result in different benefits (with a RAID 0 being the fastest, but utterly lacking any kind of redundancy/safety-net):

So, for example, using Seagate Ironwolf HDDs at the prices above, if we were to compare 2x 16TB HDDs in a RAID 1 ($618) vs 3x 8TB HDDs in a RAID 5 ($541) vs 5x 4TB HDDs in a RAID 5 ($525), the result is that although all three RAID configurations will provide 16TB of available capacity and protection, the LOWEST PRICED 5x4TB RAID 5 Setup will actually give the HIGHEST PERFORMANCE as it is the most drives being read/written with at any given time.

Bigger Capacities are more often ‘PRO’ or ‘Enterprise’ ONLY

This is something of a growing trend, but because of the development of larger HDD capacities requiring modern storage technology to improve in big ways (to increase that storage cap, but also remain stable and maintain performance), we are starting to see more and more HDD brand release big, BIG capacities, but limit them to ONLY the PRO or Enterprise tiers of their portfolios. Seagate doesn’t do this too much on their NAS series, but WD Red has been involved in this kind of range division for a few years now, with their WD Red Plus series capping at 14TB, but their WD Red Pro range now available in upto 22TB (with 24TB around the corner). See below from the official WD HDD site:

So, if you DO want larger capacity HDDs, do not be surprised if it means you are forced to opt for more industrious HDDs in Pro or Enterprise ranges. This does mean longer warranties and slightly higher individual performance, but also means higher power use and one other big issue that main smaller/home/SMB NAS/DAS users complain about when in closer proximity to larger HDD arrays. Namely noise…

Enterprise and PRO HDDs make more click-and-access noise

Yep, Noise. It shouldn’t come as a big surprise, but when you cram as much hardware into a single 3.5″ HDD casing, then those moving/mechanical parts are going to have to work harder! In the case of larger HDDs that are forced into the Pro/Enterprise ranges due to their hardware development, the result is that these drives make noticeably more noise when they are spinning up, being accessed and especially during high-volume access. This is because larger capacity HDDs have more platters (the circles inside that your data lives on) and the actuator/arm (the bit that is constantly moving across the platters to read/write data all over those disks) is constantly having to move in/out/up/down. This is particularly noticeable with even a single larger capacity HDD and when you have multiple running in a single RAID, the noise is especially noticeable (often louder than the NAS that they are inside!). Here is the noise of 4x WD Red Pro 20TB HDDs in a 4-Bay Synology DS920 NAS during high access:

Now, this is not going to be a problem for everyone. If you plan on running your NAS far away or in a part of your home/office that is suitably noise cancelled, then the noise of larger HDDs is not really going to be a factor for you. However, those of you who are going to be in close proximity to your NAS, you will definitely notice the industrial quality of larger capacity HDDs!

WD Red Pro Noise WD Red Plus Noise

Why You Should Use a Smaller Quantity of Larger Hard Drives

There are two sides to every coin! As good as the points above are that highlight the benefits of smaller HDDs in larger quantities – there are also a whole bunch of advantages to opting for larger HDDs instead. Let’s go through them now.

Using Bigger Capacity HDDs Can Mean You Can Use a Smaller/Cheaper NAS

Yep, despite my highlighting that the using multiple smaller HDDs in the right RAID can result in a lower price per TB (after redundancy) vs larger HDDs – using MORE hard drives will mean that you need to use a larger NAS/DAS system. Larger NAS/DAS systems are always more expensive, as they need to have more physical space, resource use in production and power/PSU sizes to run the larger enclosure. Add to this, thanks to memory shortages right now, that smaller scale NAS systems are starting to arrive with more memory by default (as 2-4GB is becoming less cost-effective to produce with chip shortages) and often with little/no increase in the base price. For example, below is the TS-264 and TS-464 NAS. Same CPU, design and ports – however the 2-Bay system has 8GB memory by default AND IS STILL $134 cheaper!

So, this can often mean that you can save money on smaller quantities of larger capacity HDDs becuase the enclosure they are going in is cheaper over all.

Using More HDDs in a RAID Means Increase Points of Failure

Yes, this might seem a little counterintuitive, given my comments earlier about single containers vs multiple and failure. However, using more HDDs in a single RAID array opens the door to more points of failure (i.e more drives, more chance of a drive failure). Now, on the face of it, this kinda balances against big drives anyway, but there are some users who want to have as fewer points of failure in their system as possible, as then they have fewer areas to monitor. This is further exacerbated when you factor in things like an unexpected power failure during heavy write operations breaking multiple drives at once and/or potential bad-batches at the factor level. Ultimately more/less HDDs is going to be something of a percentages game and although I personally do not really subscribe to this as a reason to avoid smaller HDDs in larger quantities, I know there are some users who would disagree!

More HDDs mean increased Power use/Electricity cost

This is a smaller factor, but one that (in these very energy cost aware and climate-concerned times) is growing in importance for many users. Most HDDs (big or small) use a nearly identical amount of power and you cannot really see the running power use difference between, eg. a 2TB and 20TB HDD, unless you have multiple drives running at once. However, if it DOES add up and its is further compounded by the increased power use of larger NAS/DAS systems that have more bays. Larger RAID configurations will also increase CPU usage a pinch too and once you add all these factors in 24×7 systems like those of NAS rackmounts and large-scale desktop tower systems. Below is how the power use of the WD Red Pro series compares across all the capacities:

Not much between them! Using fewer HDDs (i.e larger capacities) in a smaller NAS/DAS enclosure with an easier-to-manage RAID configuration will always result in a smaller power consumption overall (whether you are concerned with energy use environmentally or the electric bill at the end of the month – though for the latter, you will need to factor in the cost of the larger drives, remember!). Of course, we are talking about very small margins here, but for those running on limited or low power capacity situations/environments, these small differences can have BIG impacts!

More HDDs mean an increase in drive noise in drive spin-and-vibration

NOISE! It’s back again, as although the larger HDDs make more noise in clicks, access and spin noise in the larger capacity HDDs, it is also worth keeping in mind that if you decide to go for a larger collection of smaller capacity HDDs that you will encounter a different kind of noise issue sometimes. Namely, vibration (a persistent humm) noise in the larger NAS/DAS systems with more drives inside. Although this is nowhere near as annoying as the clicks and whirs of the larger capacity drives (in my opinion at least), it CAN be very annoying for those working close to the NAS/DAS and are sensitive to persistent humming. Additionally, larger capacity NAS/DAS systems (in 6-Bays and above ) that you will need to support a larger RAID array of smaller capacity HDDs arrive in mostly metal NAS enclosures (2-4 Bay NAS are normally 60/40 plastic outside and aluminium inside). These metal chassis amplify that vibration hum too! Then there s the larger NAS enclosures needing improved cooling and ventilation systems to maintain cool operational noise over 24×7 use – at least 2 fans, with multiple smaller fans sometimes for the PSU and CPU respectively. It all adds up and are factors of noise that users considering larger RAID arrays of smaller HDDs should consider!

Larger Capacity HDDs Benefit from modern build techniques and development

This is certainly something of a double-edged sword (and one that will come down to you, the end user, and how you feel about ‘new tech’ at launch) but when HDD manufacturers like WD and Seagate invest heavily in developing new techniques to improve the level of capacity, durability and performance in their drives – they almost always apply these new techniques to just the larger capacities! Most of the time, these will never be extended to the smaller capacities, as either the margins are too thin, the benefits are not needed on these established lines or they are looking to get as larger a return on investment (ROI) as possible by targeting new and exciting larger capacities that trend well. So, in the last two years we have seen exciting techniques being developed to increase storage capacity massively, such as Heat Assisted Magnetic Recording (HAMR), Energy Assisted Magnetic Recording (EAMR), OptiNAND for leveraging flash storage for drive I/O space adding to drives to free up traditional storage space and this will soon be moving forward into Microwave Assisted recording (which is what will be opening the doors all the way to 50TB and 100TB HDDs by the end of the decade). Then you have developments such as Mach 2 from Seagate that will allow twice the read/write activity of HDDs that make the jump from 250-270MB/s over SATA all the way upto 440-450MB/s. Practically all of these developments will be extended to the largest capacities and not suitable/available for the smaller ones. HDD technology develops FAST (see the video below that details the development of WD Red HDDs in the last 10 years for more of an idea how much has changed):

Of course, there are some users who will happily avoid the newest, largest and most expensive HDDs as they enter the market – instead wanting to see them out in the field for a whilst to ‘work out the kinks’ before they choose to invest their money. There are arguments on both sides.


More HDDs vs BIG HDDs – Conclusion & Verdict

There are plenty of reasons why you should opt for smaller or larger Hard drives that extend to alot more than ‘which one costs less’, with factors such as power consumption, performance, noise and durability being the main factors for business users and home users alike! On balance, larger-scale HDDs are always going to be designed, presented and released with business in mind. If you are a home user, you are much better off getting smaller-capacity HDDs, grabbing a few good bargains along the way, and get yourself a much more capable and usable NAS/DAS system to populate. Business users, who tend to produce the most data, use the HDDs for longer sustained periods and need assurances of the drive withstanding this larger usage are much more in position to take advantage of larger HDDs (longer warranties, more space, higher workload rates, etc). These are NOT iron rules and your own personal setup might well differ. To summarize though:

Reasons to Buy Larger Quantities of Smaller HDDs Reasons to Buy Larger HDDs in Smaller Quantities
Higher RAID Performance when you have more HDDs

Better Price per TB in the right RAID of smaller HDDs vs Big

More Regular Offers/Sales on Smaller Cap HDDs

Larger HDDs make more running noise individually

Larger HDDs are often Noisier in Access

More HDDs opens the door to 2 drive Failure Protection

Smaller Capacities have more proven success in operation than new larger drives

Longer Default Warranties when drives are PRO/Ent only at high Cap (3yr vs 5yr)

Higher Individual Drive Performance

Access to Modern HDD R&D + Techniques

Lower Power Consumption in smaller #s and smaller NAS’

Smaller NAS/DAS systems = Lower NAS/DAS Cost to Buy

Fewer Points of Failure

Larger Bay NAS = More Vibration NAS Noise and Fan Noise

If you are thinking of buying New Hard Drives (and you found this guide helpful), please use the links below to take you to Amazon, as it will not cost you anything extra and will result in a small % in commission from ANYTHING you buy being sent through to us at NASCompares (just me and Eddie) which goes directly back into making more videos and articles. Thanks!
Alternatively, you can visit one of the retailers below, which will also help us make further content too! Thanks for being awesome!




Amazon usa USA £125.99 [LINK]
Amazon usa USA $139.99 [LINK]

 



📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       
      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      Leave a Reply to Nick RobertsCancel reply

      247 thoughts on “Big Hard Drives vs More Hard Drives – Which Is Better?

      1. I’ll put this out there for anyone to answer – I contacted MSI to ask them and the reply was basically “No Idea – let us know how you get on”. I have an MSI Tomahawk Max II Mobo, running a 5600X and 32GB DDR4 3200mhz. Because I have a 4x Nvme 2TB boot, I only have 4 SATA drives available (I don’t bother with a DVD). I have added a 7 port USB 3.2 card. So I’m running about 72-76TB of drives. I want to expand that a lot. The internals are only 500GB – I want to take them to 18TB. Will my chipset support that? Even MSI said “Meh – Dunno”. Has anyone here done it? Its a very expensive experiment if it fails….
        REPLY ON YOUTUBE

      2. This calculator is USELESS. The “Best” it shows me is actually more expensive than the items I already have in my Amazon cart. 14TB drives for $180, NAS-only or not. I have some $100 Non-NAS drives 14TB & some NAS ones for $120. There’s no reason for that
        REPLY ON YOUTUBE

      3. too long, waste of time and doesn’t answer the question
        what is it better? 2 units of ssd 2T or 1 unit of SSD 4T?
        of course when it comes to performance
        and of course same brand and type, like sandisk ultra 3D
        REPLY ON YOUTUBE

      4. I realize that bigger ‘pro’ drive would be more reliable, NAS class/designed to be better, that’s why their also more expensive to the identical desktop version… BUT to make these lager capacity cheaper, one way *would* be to make them in desktop class and loose that extra reliability you only pay on ‘pro’

        Plus, to limit higher capacity to RED drives etc, manufactures get more money, and users don;t have a choice if its not there.
        REPLY ON YOUTUBE

      5. Per gig is cheap now-a-days. However, i don’t think i should admit i still use Barracuda desktop drives in my NAS…

        Their cheap, compared to RED drives and IronWolf.. Besides,from past experiences, they ‘whine’ allot in idle mode… Could of just been bad drive, but i doubt. These were 4TB drives

        Also, power-saving can make up the difference between buying big drives… The presumption your making is NAS’s are designed to be on all the time and active all the time, which is not always true. There is always going sections of ‘idle’, time, (particularly after midnight),. If you have Scheduled backups going on a QNAP, your gonna allow a few hour either way before the next starts to prevent possible increased failure. In that time space, the dives will spin down after 30 mins (usually) thus saving power. If you work that over a given year, that’s still a bit of energy saved right there.
        REPLY ON YOUTUBE

      6. When I first got a NAS for mass storage I got a 4 bay NAS and filled it with 4TB drives, it was nearly full after 4 years and I upgraded the drives inside it with 4 10TB drives.
        I back up the most important data off on the NAS over the movies.
        REPLY ON YOUTUBE

      7. Honestly I just have a bunch of 4tb red drives (every seagate I have ever bought failed within a year.. all of them..) My reasoning is its easier to replace a 4tb drive than an 18tb drive. Both in cost and in time. If I fail on a rebuild then I only loose 4tb of data. (I use unraid) I only backup what I can’t get back (pictures, home movies, etc. I can always re rip my dvds and such. 3-2-1 can get expensive otherwise. Especially with larger drives.

        The little nas boxes seem pretty neat but frankly an old pc with an hba card is all you need. Buy unraid once (or use truenas, openmediavault, linux, whatever you prefer) works. I prefer unraid because of the way it works. Even if you fail on a rebuild you only loose whats on the failed drive. With raid you loose the whole pool. With nas boxes your upgrade path is kinda expensive. With other options you can just use your old pc when you upgrade.

        My 2 cents worth. A lot of options. Depends on risk, time, and finances. Everyone’s mileage will vary.
        REPLY ON YOUTUBE

      8. I enjoyed this video very much! Very informative!!! What I would have like to see is a graph that shows where the flipping point is to decide on more or larger drives, including the NAS itself.
        REPLY ON YOUTUBE

      9. Well, if you follow technology you would know that ceramic glass memory has been proven to be a much smaller, cooler and vastly larger in size capability that the current SSD and HDDs. The Ceramic Memory Drives will be integrating over the next 5-10 years and the HDD will be as useless as the VHS and 8track tapes. So… no need to currently buy anything bigger than 200% of your needs, as you will be replacing them before you fill them.
        REPLY ON YOUTUBE

      10. you start with saying smaller drives are cheaper, and while they are cheaper as singles, if I were to buy a skyhawk 4tb its 21.5 per tb, a 20tb is 17.2 per tb.
        an exos is bigger disparity, in favor of larger drives.
        REPLY ON YOUTUBE

      11. The answer is simple: the best is to have lots of big drives!
        Crib the storage perspective, of course, not the noise/power consumption.
        Of course, with larger drives one should be very sure of the backups. And preferably use 2-disk redundancy to boot. It may be also result in higher ram usage.
        REPLY ON YOUTUBE

      12. Select drives based on workload and never mix workloads.

        If you’re recording surveillance 24/7 don’t mix that with other data. The surveillance activity is going to wear out drives faster. Putting other data into that mix is putting that data a risk.

        So you might need bigger drives for surveillance and maybe smaller drives for your other stuff. Create separate arrays to separate the workloads and buy drives that make sense for each workload.
        REPLY ON YOUTUBE

      13. You talk about the possible more possible points of failure.. but you miss the big point with Raid 5 vs Raid 1… raid 1, if one drive dies.. you take it out.. order a new one.. re-raid it when you get it.. with raid 5.. when one fails.. you have to get another drive and rebuild it.. b ut while that is going on.. the entire raid is OFFLINE.. so I normally recommend.. if you RAID 5.. order a spare to minimize the downtime…
        REPLY ON YOUTUBE

      14. Here is how I do it: get the price divided by total capacity to get $/TB. That is the true cost of your storage. Then you can compare apple to apple on all of your drive options and pick the cheapest one.

        Just note that there is a trade off. The more drives you have, the more power it is going to draw and the more points of failures there are in your system.
        REPLY ON YOUTUBE

      15. I wait for special CPU with lots of PCIe lanes and very little CPU power consumption. They would need a verys special design, so i guess i will have to wait forever before i can get a Raspberry Pie like system with 128 PCIe lanes (remember, they don’t need to be active all at once, but you can’t reconnect them dynamically as they are point to point, not a bus).
        REPLY ON YOUTUBE

      16. I feel like power consumption… isn’t a factor. You’re going to consume more power. You should expect that.

        Also noise… isn’t a factor. HDDs make noise. If you don’t want noise, don’t get HDDs.

        Here are my take-aways:

        1. Don’t just get 2 drives. Because you’ll end up using one for parity only and waste the space you could use.

        2. Get 4-5 smaller drives at once so you can benefit from the performance boost. This also ensures you can have more useable space over all.

        Unless you have the cash to fill out 4-5 18TB drives in your NAS, just get smaller drives. Then you can have better performance and more redundancy.

        If you didn’t want high power consumption and lots of noise, you shouldn’t be buying a NAS and filling it full of HDDs.
        REPLY ON YOUTUBE

      17. You know what, I have been researching to having a solution for iCloud and Google One Drive because I am really struggling saving my image RAW files and videos. Then all on a sudden a photographer Tony Northrup brought the light of a NAS! I did not know what NAS is until couple of weeks ago! Then I started to do my own research and found you. I know you dont have smooth voice and attraction catching vocal gestures, but I find myself in you, I would want to express my research so that people can decide what’s best for them. I have found the same agony in you. You are like a tech big brother who wants to advice whats best for us instead biased brand marketing. I like your videos. Just wanted to pay my gratitude because I know, a small wish can boost up the moral energy a lot cause you have done so much research, night and day sleepless time. I know for the video but I know it’s for the people whom you want to help so desperately. Thank you so so much.
        REPLY ON YOUTUBE

      18. hdd hum is something that drives me mad, I can stand the ticking etc but the hum goes right through me and i can hear it from one end of the house to the other.
        So for now I’m just doing manual backups and using local storage, no networking.( I really dont trust networking much when it comes to viruses etc ).
        REPLY ON YOUTUBE

      19. The clicking sounds are absolutely terrible on these drives even though I have the low RPM variant, and I’m thinking of returning them. I have 4TB barracudas in my other PC that I can hardly even hear, but they are SMR drives and I wanted an upgrade.
        REPLY ON YOUTUBE

      20. Cheaper more drives but what about power consumption? More watts consumed or is the same? Let’s say will last 6 years and had to pay more electricity ⚡️ during those 6 years that also impact
        REPLY ON YOUTUBE

      21. Would it be a good idea to have the redundancy drive twice as big as the primary drive so that when the primary drive fills up, the redundancy drive can become the primary drive and then get another redundancy drive twice as big as the new primarry drive and the original primary drive can be put in another location for storage?
        REPLY ON YOUTUBE

      22. Having not watched the video… both have their benefits and drawbacks.

        Benefits:
        More means higher throughput can be achieved and higher levels of redundancy can be gained making the setup more resilient when it comes to disk failure.
        Bigger means less power draw, less vibrations and less potential heat, less physical space used and more capacity.

        Drawbacks:
        More disks is more power draw, more vibrations more heat production and more physical space used. With the added redundancy comes less capacity as the redundancy means disks are there just to cover the situation where one or potentially more disks fail protecting you from data loss in those cases.
        Bigger disks means less options for redundancy as you have less individual disks, less theoretical throughput and often higher cost because even though the cost per GB drops the amount of GB’s per disk is significantly higher.

        In the end it does not matter much which one you pick as long as you first take some time and think about what your goal is with the setup maximum redundancy and not to concerned about max capacity well more disks is better. Maximum capacity and not to concerned about the data’s longevity less big disks is the best option. If your chosen NAS enclosure allows for more disks than you are currently using then less but bigger might also be a good option as it will allow you to grow the storage capacity over time.
        REPLY ON YOUTUBE

      23. OK Typed up a long post and then lost it all… So here is a short version.

        Check the manufacturers HCL (hardware compatibility list) before buying drives. And if you don’t find a drive of the capacity you want then consider if it’s worth the risk. RAID controllers can be real finicky about drives.

        You may feel SATA and SAS is mature tech and there should be no compatibility problems, but there are and there will be more. I’ve worked with (from memory) Adaptec, Areca, Raidcore, 3Ware and LSI. Sometimes the compatibility problems are blatantly obvious, but sometimes they are a creeping problem that takes time to develop, and they don’t get better with time. Sometimes a firmware upgrade of the drives or the controller can help, but there’s no guarantee that either is coming if you start out with incompatible hardware.

        Also stress test the arrays before your start using them. Run every storage test you can think of on them, and then try some more. Check the RAID logs and take note of any warnings. You don’t want warnings! Not even the non critical kind. Make sure there’s as little vibrations as possible. Vibrations can play havoc with RAID arrays even if they are not strong enough to cause a head crash.

        Also don’t use Shingled magnetic hard drives. They are a pain when used for RAID.

        Temperature! A interesting paper published by a storage company probably a decade ago showed that the ideal running temp for HDD’s seems to be between 35 and 45 °C. Higher or lower temperatures showed increased failure rate. But don’t take this as gospel. However we do know that high temperatures are bad in general, and 40°C is a quite easy target for HDD’s.
        REPLY ON YOUTUBE

      24. I don’t have that much data, so I end up just refreshing 2.5″ hdd every few years, and use the surviving older one as redundancy backup. as time goes on, newer drive will be cheaper with more tb, so if I don’t need those 16tb at once right now, I can just buy 4, 5, 5, 6 over the years whenever I need one. Currently have 500gb, 750gb, 1tb (dead), 2tb, 4tb, 4tb, 5tb, 1tb sata ssd, 2tb nvme

        Sure multiple points of failure, but at the same time it’s not all eggs in one basket. I did once have 1tb hdd when it was huge in 2009, backup all my files, then trip on the power cable, making the drive dead, with all the 1tb data I just sorted. So nowI list down list of file I have in an excel sheet in gdrive. so if one broke down, I know exactly what data it stored. Especially if I have 1 hdd for 1 tipe of stuff. that one is for x, this one for y, this one for z. so I won’t need to find z in x.

        Personal use 20tb should be more than suffice. which is probably 4x5tb or 5×4 tb. 450-500 usd probably. All my photos from 2010 is only around 400gb jpg. and since current hdds are 4-5tb or so, yea I can manage to save more copies in more drives.
        REPLY ON YOUTUBE

      25. If you have seriously important data don’t use a NAS use a SAN, lots of drives only generally gives a performance increase only for reading not writing, RAID on NAS devices usually has some restrictions based on implementation of the standards of the supplier vs on board raid provided by server manufacturers. NAS providers are great at vendor lock-in. Also make sure you buy drives compatible with the NAS as they don’t cover warranty issues otherwise. Generally pro series drives offer 5year warranty non pro are 2-3 years
        REPLY ON YOUTUBE

      26. huge enterprise drives can go 300mb/s sequential while a 4 or 6tb drive usually cant even hit 200mb/s especially if they’re 5400rpm so fewer disks can be as fast depending on the size difference. Also, the power use is substantial when using more disks. disk power usage can be more than the rest of the entire system combined when talking about 10+ disks
        REPLY ON YOUTUBE

      27. More mechanical parts are wearing down using smaller drives vs few less drives same as a car with three small gas engines vs one larger most likely one of three water pumps will fail before warranty
        REPLY ON YOUTUBE

      28. clip starts after 1 minute intro. In 1 minute I explain the easy facts 😉
        More drives: good for raid level 5 or higher. Where raid5 needs at least 3 disks. In case you need a specific raid level, you need the least amount of disks.
        More drives: eventually more cache if you use drive cache. Depends on drives.
        More drives: more performance if your controller is still not on its limit.
        More drives: can increase performance, if the blocks you need are on different drives.
        More TB: less power consumption compared to the same storage with more drives.
        More TB: higher density = faster access (compared 1 disk with 1 disk, not the raid in summary)
        More TB: overall costs could decrease (smaller NAS, maybe more TB per $$)
        REPLY ON YOUTUBE

      29. I use 8 x 8tb as standard in my 8 bay nas’s, JBOD. Reason is, I use a 2nd and 3rd nas as backups, and if a drive fails I just copy the data onto its replacement, that way I just keep 1 nas running, otherwise 2 would be on all the time, I do a backup using goodsync once or twice a month, I tried synolgys drive sync, too automatic. I like the control of goodsync.
        REPLY ON YOUTUBE

      30. Very short version… go for more drives. More smaller drives usually work faster AND they make less noise. My advise would be never to buy drive bigger than 8TB, larger drives come with a big drawback of noise. Also using more smaller drives and a drive failes its cheaper to replace and faster to rebuild.
        REPLY ON YOUTUBE

      31. To what extent can you mix and match drives in something like a Synology, QNAP or Asustor system? I have only WD Reds because my original NAS was a WD. I was wondering whether I can use Seagates if one fails. I was also wondering a switch to a bigger drive would work. Say I have four 8TB drives and I replace one with a 12 or a 14. Does that work? What impact is it likely to have on performance?
        REPLY ON YOUTUBE

      32. I had a slightly different experience from what is expressed here, though I’m not casting any doubt on the validity of the information. I have a Nimbustor 4, populated with 4x8TB, for 24TB of storage.

        I went for 8TB because, at the time, it represented the best bang-for-buck and gave me a total capacity (24TB in RAID 5) that I was unlikely to exceed for quite a while.

        The NAS itself represented the best box I could justify. Being four bay, it also gave me the opportunity to spread my expenses over a longer period.

        When I originally set it up, it had two drives in it. It was kind of noisy but no more than I expected. When I added a third drive, the noise and amount of disc access was much greater than it had been.

        Recently I upgraded to 8GB of RAM and added a fourth drive. The first thing I noticed was that the overall noise is far less than it was with three drives and almost certainly lower than it was with two drives. In fact, it’s got to the point where I rarely hear it.

        This probably won’t be most people’s experience but it seems to me that either by luck or design, I ended up in a sweet spot. I can’t explain it but I can hazard a guess that this is the kind of setup the designers envisioned…?
        REPLY ON YOUTUBE

      33. Can somebody please help me.
        I have a QNAP NAS with 4 x 10TB SG IronWolf + a 500GB M.2 (cache) in a raid 6.
        Sometimes drive performance seems to be quite slow (< 30MBytes per sec) If I add 1 or 2 HDDs (nas max is 6 HDDs + 2 M.2s) will it improve, reduce or not effect performance? Thanks <3
        REPLY ON YOUTUBE

      34. I dont think we should only look at size vs number but also failure rate. I would rather go with a disk that doesn’t fail on me that often then the one i need to buy a new disk every few years and rebuild the RAID.
        REPLY ON YOUTUBE

      35. If you have two large capacity drives and one of them fails…that’s a HUGE SLOG to replace in one hit. If you have lots of small drives and one fails it’s not going to hit you as hard when you suddenly have to get the replacement.
        REPLY ON YOUTUBE

      36. currently my Media collection is currently under 3TB so I do not need a very big set up yet. Currently using 3 2TB reds in a raid 5. About to upgrade to 3 3TB drives in a raid 5 Then have a single 10TB HDD as a Back up.
        REPLY ON YOUTUBE

      37. If you really wanted the best price of course you would buy used. But I get that there is no affiliate income in that suggestion. So I’ll just say it here.
        REPLY ON YOUTUBE

      38. I just built my own NAS after going through a 2-bay NAS and then added a 4-bay NAS. I built one with 18 HDs and it is much more expandable. I am using UNRAID and it has been great so far. It is much faster and I have so much more capacity. When I need more, I will replace some of my 6 TB drives for 12 TB drives.
        REPLY ON YOUTUBE

      39. one point , is when one of your drives will die , is easer and faster to recover one 4tb drive than a 12tb drive , and you don t lose all your data just lose a part of your data , and you can come up much easer with 70 euro than 300 when you get a surpize dive falure ,
        REPLY ON YOUTUBE

      40. Or, Dell T630 LFF server £350.
        Used 2GB cache RAID controller £110
        6x used 8TB HC520 drives, £70 each.

        Needed a server as well as a lot of storage, so leaving out CPU & SSD upgrades.
        REPLY ON YOUTUBE

      41. As an Arch Linux user, I was torn between buying an expensive (new) tiny RAID machine with 4 x new HDD’s or using an old (but free) monstrous 12 bay Supermicro server with 12 (free) smaller HDD’s.

        Decided to go the Supermicro route. Have to admit, I’m way in above my head on this and have been dragging my feet for nearly two years now. In the end, I’ve decided that any form of RAID like setup is not for me. Don’t want to pay electricity (UK prices) on a server running 24/7. The beast can sit in the corner and be booted up once a week, whereupon I’ll do identical rsync (ext4) backups to two of the four nodes. Then following month do the same to the other two nodes. If I have a week when something of critical importance is created, I’ll rsync immediately. Also like the idea of each backup being completely isolated from the others.

        I know my PC HDD will one day fail. However, given a choice between losing a few days of data or paying 24/7 electricity for RAID… I’m prepared to accept the former.

        Thing is, I’ve never heard of anyone doing this with a four node machine, so maybe there’s a good reason not to. I like the idea of the sever being extremely heavy, as it’s less likely a drug addled thief would be able to move it, or even realize the drive bays are removable. Always thought those tiny RAID machines were too easy to tuck under your arm and walk away with. In fact, I might even bolt the thing down, as right now it sits on a table.

        Could’ve gone with 4 x HDD’s and backing up via USB. However, that’s back to the hassle of pulling them out from a hiding place and connecting all those wires up. Plus, I’d need to buy large expensive HDD’s. Yep, I just like having four sets of backups.

        Yes, fire/flood is a possibility, but still have a cloud backup for all essential documents. Like I said, I ain’t no expert or computer geek. Maybe it’s a daft thing to even consider doing…
        REPLY ON YOUTUBE

      42. In 2004 I had 9 Seagate hard drives fail in a 2 week period and they were sequential serial numbers. When I contacted them about a possible issue with that batch they spewed out the corporate boiler plate response saying that wasn’t the case and that their hard drives were of very high quality blah blah blah. I asked for new replacements rather than refurbished ones but they wouldn’t do that either. I’ve never sold another Seagate drive since. I doubt the few thousand drives I’ve sold over the years that weren’t Seagate are missed by them but I also never recommend Seagate because of their piss poor customer service.
        REPLY ON YOUTUBE

      43. The time to rebuild an array with 1 of several smaller failed drives verses the time it takes to rebuild an array with 1 of two large drives is important to me as a home user.
        REPLY ON YOUTUBE

      44. I’ve had 7X 4TB Hitachi Ultrastar drives for my NAS since 2015, and still haven’t had one go bad on me. I’ve run it in both a RAID 6 and RAID 10 with a hot spare, and in both hardware and software (WSS) RAID modes, and recently bought another drive to make it 8 and did away with the hot spare, making it the storage for my backups. Still pretty reliable, but I wanted to replace it with SSDs. I’m a believer in minimum 6 drive arrays for NAS, for both performance and redundancy.
        REPLY ON YOUTUBE

      45. I built two TrueNAS (was FreeNAS) using six 4TB drives each (4+2 ZFS2), back in the days.
        I’ve been considering upgrading to six 8TB drives (4+2), but have also been thinking about four 16TB drives (2+2) instead.
        Both get me about the same usable space (~32TB). Note less than 2 parity drives is NOT an option.
        I’ve been thinking about it for a long time, but haven’t reached a conclusion. It’s a tough choice.
        REPLY ON YOUTUBE

      46. IF I “HAVE TO” BUY A BRANDED NAS BOX, I’d spend my money on the biggest NAS with the max # of BAYS possible. Cuz you can always buy cheap smaller drives at first, but if you get a small NAS and used up all your bays from the begining it won’t grow more bays in the future and expanding more capacity means you have to discard your smaller drives, and that is a drive doing nothing loosing it’s value as redundancy.

        The question of more hdd or Bigger hdd its a wrong question. Why? because the purpose of a hdd is to hold data. So data security always comes first.
        Product like 2 bays NAS are pointless, you can achieve that with any old computer or laptop laying around your house, hook it up to you network and you have a raid 1 (minimum) NAS, the rest is just SOFTWARE, heck if you like Synology that much you can use XPenology which is a hacked version DSM 6.2 and the new DSM 7.0 that can be installed in any computer. And if you think well my old computer consume a lot of WATT to be an Always on NAS, then find out the socket of your motherboard and buy the most efficient CPU on ebay. Like, I have an old i7 90W cpu, then get an i5 35W chip for $20 and it will be almost as fast as the fastest Synology box.

        Then what is the appropiate rule to build a NAS. It’s pretty simple actually… you build it with the capacity you’ll need. A good rule of thumb is aggregate all your current storage cap in your house and multiply by 2 (chances are it took you years to fill them up). Most people without NAS, they won’t reach 14TB.
        And this is how data centers are built, they buy by capacity and not expandability.
        Second thing you’ll need to do is calculate how many disk you are willing to distribuite those “14TB”, always remember the more the better, cuz you will have more redundancy.
        In my case I would go for used SAS drives on ebay, for one they are all 100% enterprise drives, and are 1/2 the price of SATA drives with the same Capacity, but that also means you need to build your NAS with a SAS backplane and a SAS HBA in mind. ie I bought 3 Dells R730 XD with 24 2.5″ bays, 24 cores, 256Gb ram ECC and it includes 24x 2.5″ inch 600GB 10k rpm sas drives. For only $900 ea. I bet you can get waaaay lower price if you go for r620
        Now you can also get a r730 same specs but with 12x 3.5″ bays, there is one that comes with 12x 3TBs SAS drives a total of 36TB for $1400. Synology 12 bays costs $3000 and it doesn’t come with disks. Booooo
        If you go to ebay, you can see SAS 3TB goes for as low as $15 ea and buy in bulk I found a 5x 3TB for $30 total LOL. Oh! and it’s free return, couple years more 6TB will be at the same price point.
        And almost forgot, you can switch to SATA drive when you like. Cuz SAS hba with SAS backplane can take SAS drives AND Sata drives. Unlike most Synology NAS only accept SATA drives.

        Of course power consumption is a problem but it’s like $25/mo I would gladly pay (cancelled Netflix and Disney Plus LoL), cuz you are dealing with a real server not only you learn new skills, and all the parts are super cheap. And you can always expand your server capabilities. Synology is moving to 2.5Gb and 10Gb as PREMIUM stuff… heck I’ve been running 10Gb like a decade ago. I moved to 100Gbps, not long ago, that’s 10GB/s!!! The cards costs like $150 ea and the switch costs around $600 for 32x ports of 100Gps, yes 32 ports. I moved all my nvme to boost the server storage, and all my terminals are all diskless because booting from network is almost as fast as having a local Gen3 nvme, and not to mention all the VMs and Dockers you can run.
        REPLY ON YOUTUBE

      47. What’s the best HardDrive for HomeUsers (for Data, Video, and Surveilance)? …maby a Seagate Exos x16 (with 14TB) in a QNAP Turbo Station TS-464 8GB …….what do you think?
        REPLY ON YOUTUBE

      48. Noise is really a bummer for me now. I went from 4x3TB red to 3x8TB iron wolf, and the noise is more than double, and far more annoying in character. Heat and power also way higher. For next upgrade I want 14TB plus disks, and they are all horribly loud. I want high capacity, but low noise, low speed, low energy, since I can have multi TB of NVMe cache.
        REPLY ON YOUTUBE

      49. Very informative videos. You give info that is very relevant without beating around the bush. You make a good point about balancing out between the cost of NAS system and the actual storage. One option for anyone starting out could be to go for a smaller storage and then buy more/bigger HDD as the data grows and HDDs become more affordable in future, while investing in a NAS with more bays for future-proofing if really necessary. That also means hopefully sticking with the NAS with more bays for a longer time, given the initial cost.
        REPLY ON YOUTUBE

      50. Thanks mate for the great info. I have a 5 yr. old TS-653A with 5 WD60EFRX and I’m stuck with 1gbps connectivity. I’d like to get at least 2.5gbps upgrade so I’m going to get another NAS with faster networking and use it as a staging NAS. I’ll add a 6th drive to my 653A and move it to my in-laws house and work out syncing between the 2 NAS.
        REPLY ON YOUTUBE

      51. I think the mistake people make with NAS and especially raid5/6 is they think its a backup and its not. Any important data still needs a backup, RAID5/6 yes can increase read/write speeds but its really about redundancy (meaning uptime), businesses need to maintain uptime but not home PC users unless Home users are hosting web, file, plex servers for others offsite to access.
        REPLY ON YOUTUBE

      52. I have adopted this rule now; Any HDD capacity less than 1.5x what you can get for $200 on the SSD side, is to be considered obsolete.

        Currently you can get 4TB SSDs for just north of $200, that means 6TB (1.5 x 4) drives are now the smallest HDD that is worth getting. 6TB HDDs are now $90, while 4TB HDDs are $60. Up to each and everyone to put their cutoffs though!
        REPLY ON YOUTUBE

      53. Still not clear which is best ????????, so I bought a QNAP TS-1232PXU-RP-4G 12bay ($1475) and put in 12 x 20TB drives (Ironwolf Pro $329 each). After RAID 6 have 185TB available ????????2 x 10gbe, 2 x 2.5gbe network connection. Bought 13 drives to have a spare. Total cost before tax: $5752.
        REPLY ON YOUTUBE

      54. I don’t buy Seagate – ever – crooks they are, different drives sold with the same SKU – some are from a modern Thailand factory, others are pieces of shit from an ancient Chinese plant…

        Hitachi, Kioxia are decent companies, making excellent products

        WD, well, Seagate bought them out – your mileage may vary, depending whatever they actually bother to ship you…
        REPLY ON YOUTUBE

      55. Hi Robbie, why my WD HDD purple 2TB on the TS 262c keeps generating noise when idled without any active usage of access, like ‘da da da da da’ … which is non stop. Any thing I can do to stop or reduce it? Pls help????????
        REPLY ON YOUTUBE

      56. 16, 18, 20, 22TB>>>>Talk about putting your eggs in 1 basket!!!
        Sad this guy doesn’t even talk about the difference from smaller drives vs larger drives platter technology and the difference in drive life expectancy and likelihood of drive crash.
        REPLY ON YOUTUBE

      57. Smaller. Failed 2TB drive can take days to get the data back. Imagine the damage if you have to deal with big 12TB drive that failed. Don’t keep all your eggs in one basket. But if you can – get more and bigger drives. Spread the information around.
        REPLY ON YOUTUBE

      58. he speed difference between more drives or not is one I have debater. I have an 1819+ and a newer 920+. The 920 CPU is about 50% faster, but the 1819+ had 6x HDDs, and i used the other 2 bays to run normal SATA SSDs as a RAID 0 cache, since the add on card for the 1819+ is really pricey for what it is. I ran PLEX on both and initially it felt like the 920+ was slower and stuttered more with larger files, however now there doesnt seem to be much of a difference. Hardly a scientific test but this is an interesting question. Not sure how to test it scientifically.
        REPLY ON YOUTUBE

      59. I like this video but it never answered the question posted in the title. It laid out a lot of considerations, which is helpful, but never came to a conclusion. I still do not know if it is better to get a 2, 3 or 5-bay NAS. Near as I can tell it is a wash.
        REPLY ON YOUTUBE

      60. You missed one point. Kinda. It falls in line with the performance aspect. the larger the drive the longer the rebuild takes on a failed drive. So a 4 or 6TB drive, depending on how full the prior drive was may take 3-8 hours depending on the speed of your system / controller. But a 20TB drive could very well take 24+ hours which in turn leaves your array in a vulnerable state for a second failure. BTW this is why NO ONE should be using RAID5 anymore. The happy medium for me is somewhere between 10TB-16TB drives. They offer larger storage, but with a reasonable rebuild time.
        REPLY ON YOUTUBE

      61. Another option is 8TB SSD drives. They are much faster, silent, don’t vibrate, use little power and are very reliable.
        I’m not up on linux file systems or RAID wrt redundancy, but maybe 2 x 8TB and a 4 for error correcting, giving you 16? Just accept the risk given the greater reliability?
        REPLY ON YOUTUBE

      62. Great information and I love the presentation. You are definitely not boring, even if some would say the subject isn’t the height of glamour. I bet you could be a stand up comedian too.

        A lot of the useful stuff I have learned about NAS technology is from your videos. Nice one, thanks!
        REPLY ON YOUTUBE

      63. I just bought WD Gold 20TB. Crazy fast Built-in NAND and transfer speed up to 500MB/s !!! and much less noise !! I always love larger drive than small one. Because you will save money to throw away small HDD.
        REPLY ON YOUTUBE

      64. I’ve deceided to get a NAS for home use as a media server. I’m checking out a lot of your videos to make up my mind what I actualy want and need, your videos are great, very detailed and very good explanations of the usage and for whom that particular NAS would be of interest. Kepp it up….
        REPLY ON YOUTUBE

      65. You don’t touch on the fact more drives you are using less data per drive at any write or read.

        If you have 2 large mirrored drives, 100% of the data is processed through each of the drives. If you were to have the same capacity over 8 drives, the actual throughput is divided by 1/8th per drive. If you look at data loads of 300tb per year with an MTBF of 1,000,000 hours, the raid with 8 drives will last 8x longer.
        REPLY ON YOUTUBE

      66. So basically the NAS itself is very quite, even when running standard HDDs. Datacenter HDDs are a big step up in noise. Is that true for all high capacity drives in your experience? Do you know any large (~20TB) HDDs that are on the quieter side?
        REPLY ON YOUTUBE

      67. You should do a video on having multiple drives, vs bigger drives, and the energy costs overall, in difference.

        Energy costs factor alot into this too, especially today with electricity prices for people.

        Your right to do such a vid to point this stuff out, but you could of shown the energy differences also.
        REPLY ON YOUTUBE

      68. I’ve calculated how many GB you get per dollar and looks like the larger sizes give you a much better bang for your buck (14-18TB drives):

        SG IW:
        1TB – $35 – 29 GB/$
        2TB – $65 – 31 GB/$
        4TB – $105 – 38 GB/$
        6TB – $158 – 38 GB/$
        8TB – $177 – 45 GB/$
        10TB – $224 – 45 GB/$
        12TB – $258 – 47 GB/$
        14TB – $271 – 52 GB/$
        16TB – $309 – 52 GB/$
        18TB – $389 – 46 GB/$

        WD RED PRO:
        4TB – $140 – 29 GB/$
        6TB – $173 – 35 GB/$
        8TB – $215 – 37 GB/$
        10TB – $245 – 41 GB/$
        12TB – $253 – 47 GB/$
        14TB – $270 – 52 GB/$
        16TB – $298 – 54 GB/$
        18TB – $349 – 52 GB/$
        20TB – $419 – 48 GB/$
        22TB – $551 – 40 GB/$
        REPLY ON YOUTUBE

      69. Actually, I think in most case It depends on how many IO is on your motherboard
        such as, if you have 4 SATA ports and you used 2, then you will soon realize if you buy too many low-volume hard disks, you will soon be out of IO to let you upgrade in the future
        REPLY ON YOUTUBE

      70. I’ve got this idea recently.. In theory, what about using classic non-NAS type 2,5″ SATA SSD’s? For example four 2TB SSD’s in RAID 5? I know, it’s more expensive. But it’s silent, less power consumption and if I would have money for it? Just for home using, not really too much transfering data and important data will be backed up to external drive too. Is it there some statistics or something? What’s yours opinions guys? I have few data SSD’s in pc for long long time using by daily basis and they are immortal.
        REPLY ON YOUTUBE

      71. Maybe I’m on drugs or something because no one else is commenting on this, but in regards to the first segement “More HDDs Can Be Cheaper…”, your math seems all wrong. If a 18TB costs $389 and 3 6TB cost $158 each the total is $474. The 1 18TB drive is substantially cheaper. It seems to always be cheaper to buy 1 large drive than it is to buy 2 or more smaller drives to reach the same capacity. The one exception seems to be the 22TB RED drive. While its true that the TB per dollar increases the smaller the drive is, it doesn’t do so nearly fast enough to make buying multiple smaller drives worth it.
        REPLY ON YOUTUBE

      72. For most home users, bottom-line .. use RAID 1. What you’re not telling the people is the difficulties in rebuilding a failed multi-disk RAID e.g. 5,6,10.

        Multi-disk RAID 5,6,10,etc is when you need large storage capacities exceeding a single disk capacity. For example, large storage banks of video, photography, workgroups, etc.
        REPLY ON YOUTUBE

      73. More drives is more performance is quicker to spin down is less power used. More competent nas can run server tasks or wake on lan or….using less power in total than a smaller nas can in your total setup.
        Large drives take to long to rebuild to be used in anything less then raid 6
        I rather have more points of failure then 2 drives that are the same type and age and then pray for 24 hours that the remaining drive works to rebuild the raid 1 set.
        And ofcourse raid isn’t backup, always make back ups because if it goes terrible wrong you can lose all your data no matter what setup you have. A fire or flood doesn’t care about your drive size.
        If you don’t put the nas in a place where noise isn’t a problem, use SSD if you use your nas constantly or time it so the drives sleep during the day.
        REPLY ON YOUTUBE

      74. I too am a novice here, and found this incredibly helpful. Thanks so much for this from sunny Sheffield in the UK 🙂 I know you like QNAP, my Hi-Fi specialist suggest QNAP, but judging by security concerns from another of your videos QNAP v Synology, I had cancelled a 2 drive QNAP on Amazon, to rethink, and possibly have a 4 drive Synology. My Hi-fi specialist will only support if I bought a QNAP….. now that is very a difficult decision..!! Oh, and stop using big words.. lol.. ie, nebulous..!!
        REPLY ON YOUTUBE

      75. the wd red pro and iron wolf are not enterprise drives. they are consumer nas rated drives. Ultrastars are Wd enterprise drives used to be Gold and Exos Drives are Seagates Enterprise hdd
        REPLY ON YOUTUBE

      76. It would clearly help to get a better grip of this topic and your conclusions, if you would visualize e.g. the performance, power consumption etc. of the different SSDs., This way everyone could easyly see the sweetspot of the price and the number of drives. We humans are visually predisposed ????
        REPLY ON YOUTUBE

      77. Hi, very good investigation. Does something speaks against mixing HDD brands in the same NAS? I mean 2x 12TB Seagate Ironwolf and 2x 12TB WD Red?
        Thank You
        Freddy

      78. It is important to also consider rebuild and restore performance. With a larger number of drives running RAID 5 or 6 there is a significant difference in rebuild time compared to rebuilding a mirrored array. Also there is a difference yet again when you compare something like a RAID 10 to a pool of mirrors instead. In the case of RAID 5, 50, 6, 60 and 10 your backup will be of the entire array. In the event that data loss actually occurs and you must restore from backup you are talking about restoring the entire size of the array that was lost. However, when using pools instead you can elect to restore only the data from the underline RAID 1, 5 or 6 that you lost. These are all important factors to consider when selecting how you want to build out your storage array.

        Also I should mention that if you are going with a lot of drives it is also possible to hybrid nest the arrays in such a way as to maximize performance while also minimizing your restore from backup time and risk of inaccessible data. For example you could take two drives and place them in a RAID 0 then take two more drives and place them in a different RAID 0. Then you take those two RAID 0 arrays and Mirror them together. You create sets of 4 drives in this method that you then pool together. The obvious con to this is that you would ideally add sets of 4 drives at a time to your pool.
        REPLY ON YOUTUBE

      79. The biggest point you’ve missed is that the best way to shop us to first identify your risk tolerance, and then identify the workload needs, and buy either the largest drives you can afford that give you more redundancy than you think you, need or the fastest drives you can afford that give you more iops than you think you need. Your video also completely neglected iops, focusing on sequential io and capacity. Even just adding a small nvme mirrored cache device can turn a large disk pool into a virtualization and game storage powerhouse. Imagine what you could do with all-flash
        REPLY ON YOUTUBE

      80. I think your videos and reviews are excellent, and the hard drive pricing comparison tool looks very useful (thank you), BUT, I was staggered when I visited the nascompares website and opened the Vendor Preferences section of the cookies permissions…more than 1500 (yes, one thousand five hundred !!!) “Legitimate Interest” and other cookie permissions which seemingly can only be turned off (or activated, if that’s what the website visitor wants to do) MANUALLY. Yes, it took a looong time. Please, just provide a simple and all-encompassing “Reject All” option in cookie preferences. Cookies should be (IMO) opt-in. not ‘gotcha’.
        REPLY ON YOUTUBE

      81. First: extremely useful video, thanks! My application is 2 drives in a file server in my living room, so noise is important, especially when idle. What I notice with this WD Red Plus vs. the IronWolf 14TB is a low frequency bass note. My suspicion is that will reverberate around my case and cause vibrations. The Seagate might win for me, I think.
        REPLY ON YOUTUBE

      82. If you are into data and/or storage then you can never have enough space.
        Cheaper long term to buy the biggest NAS with biggest hdd’s, Otherwise you will run out of space and cost you more to replace all those smaller hdd’s or smaller NAS.
        Not really worth it to buy the expansion unit only to fill it with more smaller drives.
        Made that mistake with my first NAS, 5 bay and only filled it with 3x8TB (1 for redundancy) drives adding another 2 later on.
        Thought I was being smart and saving money, Filled it after 3 years, I regret not going for 16TB drives at the start and would have lasted twice the time 6 or more years.
        REPLY ON YOUTUBE

      83. After an almost critical incident, hot spare makes more sense to me. If not go for dual drive fail safety in synology to stay safe. Avoid buying drives from the same batch, I went as far as buying drives from different stores and different months.
        REPLY ON YOUTUBE

      84. I always tend towards the higher end of drive sizes but normally stay a step or 2 below largest capacity so I can have a better price per TB and just know that I can get bigger for cheaper in the future I prefer having expansion bays in my system open as my storage needs grow as that always have and will continue to
        REPLY ON YOUTUBE

      85. One idea to consider is the difference in power for say 4 big drives (say 14TB each with 1 parity) versus 12 small drives (say 4TB each with 2 parity).

        The comparison of a small size storage ( smaller than 20 TB ) I think was the focus of the video and not larger size storage (35+ TB storage sizes.

        Overall the video hit the points I think are important.
        REPLY ON YOUTUBE

      86. Do you have a video on different ways to migrate to a new NAS with same/different bays. Maybe you could add to the tool a migration option that can calculate the least number of drives / steps required e.g. go from raid 5 to raid 1 larger drives and then reuse the raid 5 drives once migrated. Hopefully this makes sense. What do people do with old working drives?
        REPLY ON YOUTUBE

      87. Backing up 10 drives with several computers much faster. You also probably should not use 1 partition unless you want to wait 2 days to complete a back up.

        I have heard many never make backups, so imagine the panicked person thinking his hard drive is failing, then waiting two days to see if the new drive got it all?
        REPLY ON YOUTUBE

      88. @NASCompares
        I hope you will be able and willing to answer my question. I have a DS218+ with 2 8TB seagate iron wolf harddrives. I want to have an upgrade so I’m buying a DS420+ nas and 2 18TB seagate iron wolf harddrives. My plan is to replace my 2bay synology to the new 4bay synology and I want to know if I can just put the 2 8TB drives into the new synology and then also add the 2 new 18TB drive in bay 3 and 4..

        I want all of them to be configured with SHR and the 2 8TB drives are already in SHR. According to the synology website (the nas RAID calculater) it tells me that with my setup (2x 8Tb and 2x 18TB) I should get 32TB available space and 16TB Protection.

        So.. can I just take the 2 older 8TB drives (in SHR) out of my 2bay synology and put them together with the 2 18Tb drives into the new 4 bay synology without losing my data or without having to figure out a way to transfer the data off the drives first.. I do not have the external drive space to temporary store 8Tb worth of data. I don’t really care all that much about any settings from my old nas, all I want is to keep all my own data safe when transferring to the new nas.
        REPLY ON YOUTUBE

      89. Looks a bit messy on iPad. Be nice to have a mobile version of the tool so it’s easier to use. Maybe you could follow in Money Saving Expert footsteps and creat a dedicated app for your site
        REPLY ON YOUTUBE

      90. Didn’t quite think things through enough when I ordered drives for my first NAS. Had to decide between Synology IronWolf, and WD Red (not Pro or Plus). Ended up going with the standard Red based on some reviews that weren’t quite… complete. So now I have a drive that isn’t officially supported and for a reason I still don’t quite understand is just worse in the long run than the IronWolf. All of this because I wanted to save 15€
        REPLY ON YOUTUBE

      91. No offense to the work you’ve put in on this tool, but none of your calculators have ever worked for me. Disabling ad blocker and different browsers, just doesn’t work. Not sure what I’m doing wrong. ????????‍♂
        REPLY ON YOUTUBE

      92. Thank you guys!!! Anestis from Greece here, just got my first NAS, a Qnap 464, thanks to your recommendations for 4bay Nas and now trying to decide what kind of hard drives to buy. I need a lot of space (50tb to 60tb) usable space in RAID5 and the cost is very high. Do you think that Ultrastar series is suitable for my case? I’m going to use my NAS for multimedia library and PC backup mainly. THANKS AGAIN for your great articles and useful videos!!!
        REPLY ON YOUTUBE

      93. It would be great if you did the same for shucked drives. Many Synology users use them. Frankly, I have one server with (7) 14TB drives and another with (6) and not a peep about them for over two years so far. Still healthy. ????
        REPLY ON YOUTUBE

      94. Ty for this. I have a ext4 shr2 raid in synology, and am considering getting a newer model and using that to switch from ext4 to btrfs… I wish there was an easy way to switch between ext4 and btrfs without new drives… but I may just expand my drive sizes at the same time as transitioning from ext4.
        REPLY ON YOUTUBE

      95. Thank you these great video’s, I highly appreciate them!
        If I may ask a request on a video. using QNAP NAS and running Qumagie. How do you backup meta data from Qumagie as they are stored in an Qumagie database and not in the photo or on a separate file.
        Ronny
        REPLY ON YOUTUBE

      96. The required amount of redundancy depends on how you plan to use the storage. If the NAS is the primary storage, then redundancy is very important. If the NAS is backing up primary storage on other computers, then RAID might be less critical for some people. The other consideration is point in time, or off-line, copies. If you have a fire or a ransomware attack, it might take out the whole NAS. Therefore, you need protected offline copies. That means maybe double or even more storage. How should we provide that? Does that remove the need for redundancy in the NAS?
        REPLY ON YOUTUBE

      97. Really interesting video, thanks. Here are a couple of ideas on presentation of the numbers: 1. Produce a line graph of price against drive size. That would make it clear that the price per terabyte drops a lot from 1TB to 20TB drives – $35 from to $21 per TB on pros. 2. Compare prices for some sample configurations with the same amount of usable storage.
        REPLY ON YOUTUBE

      98. Recently got an 8 bay QNAP, but getting disk combo nail is more challenging.
        Current stack of drives don’t give me what I’m ideal after
        3 x 3TB
        4 x 4TB
        2 x 12TB
        Will prob get rid of the 3 and 12TB drives for more 4TB
        The 12TB are HGST ultra star drives, as you say noisy too, but that’s not an issue.
        Got 2 X 32Gb for cache
        REPLY ON YOUTUBE

      99. This channel is so bad. Here in America I’m getting 12 TB Exos drives for $110 each, 6TB Hitachis are $45, and you can buy a motherboard, cpu, sas card, and a few drive cages for a lot less than the price of those pre-assembled and not expandable NAS cases
        REPLY ON YOUTUBE

      100. Appreciate your content but I do think you can benefit from shorter videos that get to the point a lot quicker. I find myself scanning and skipping through your videos a lot because I just don’t have half hour plus to dedicate to something, especially when I can Google and find an answer within 1 minute. Your content is mostly informational so getting to the point quicker is going to be much appreciated by everyone. Maybe start with the conclusion and then continue with the details as to how you reached your conclusion. ????
        REPLY ON YOUTUBE

      101. I think the bit you didn’t really focus on when comparing two 18TB drives vs 5 smaller drives was you dropped from a RAID Mirror to a RAID Array. That is often a big performance drop. Also replacing & rebuilding a RAID 1 mirror is faster. And if you lose both, and want to pay someone to do disk plater recovery, the probability of retrieving usage data, drops significantly when they need to reconstruct the data off multiple drives.
        When might you lose both RAID 1 drives simultaneously? Domestic: Voltage spike/lightning. Commercial: Some idiot unscrews the wrong thing & drops all disks on the floor.
        REPLY ON YOUTUBE

      102. Why not “more bigger hard drives?” When I bought my NAS I got four of the biggest HDD I could at the time. Now they make drives that are almost twice as large, so I’m jonesing for an unneeded upgrade.

        The noise is a legitimate concern, but I think for most people the best solution is to try and have a wiring closet / server room type setup and put it in there where you won’t really hear it. Of course, the problem with that is that the house basically needs wired for ethernet with a patch panel. I wish I had that.
        REPLY ON YOUTUBE

      103. There´s a interesting point to consider the multiple disk use. The SATA saturation (or other conector). If you are using the 10 Gb connector and/or VMs and docker applications.You can saturate the data bus with to much IO, exceding the SATA read/write capacity, and depending of biggest caches in SSD. And surprise, more probability of failure via hard/soft or energy. With multiple smaller disks more data can be read and write. The trick is what is the size of storage that you need and what size of NAS (slots) you have (including the extenders).
        REPLY ON YOUTUBE

      104. Quality content ,love it

        Currently got 8 PCS mg05 8TB which is super noisy when using in regular plastic Nas

        Moved into a node 804 they are way less noisy on ticking .
        Red 4TB non SMR is just fine, they are way silent compare to the mg05
        REPLY ON YOUTUBE

      105. Agree head spinning. (5400?) My current problem is ripped blu rays will not stream via Plex over my network to fire TV. Having to convert down hard. Is it my network speed? (How do I test) is it my internet speed? (Max 33mbs).
        REPLY ON YOUTUBE

      106. As a novice, this makes my head spin. I’m thinking about a NAS to put all my video, music, and photos in one place, with backup, and if I can afford it, allow it to be cloud storage for my kids. I have 25TB of external drives, and while it’s good for storage (I’m afraid of disk failure and data loss). I’m totally lost as what to do.
        REPLY ON YOUTUBE

      107. Having just replaced or added HDD’s to both my 4 bay Synology and my 4 bay QNAP, my next NAS purchase to replace one of these will be an 8 bay. And I’ll install 3 larger HDD’s in RAID 5 or Synology Hybrid RAID and add new and larger drives as the need arises and prices fall. The worst thing about smaller NAS is the cost of pulling out perfect good, decent sized HDD’s because you need to replace them with larger drives. This is especially problematic with QNAP as you need to have all drives be the same size. With Synology’s SHR, drive sizes can be mixed ( although even that is not perfect). The extra cost of an 8 bay vs a 4 bay is easily saved by the ability to continue to use my older, smaller HDD’s. Don’t be deterred by up front costs; look at longer term use and future purchases and redundancies.
        REPLY ON YOUTUBE

      108. If a drive in a RAID configuration fails, it takes longer to restore a large driver than a smallere. Thus it takes longer time before the redundancy is restored.
        We are talking time in the order of days. During that period another disk failure leads to full data loss
        REPLY ON YOUTUBE

      109. I would have divided the presentation between Consumer needs/suggestions and business needs/suggestions:
        in case of business you need IOPs and you do not care about noise because you have a datacenter (for small that it can be), so smaller disks in higher number give you better performance anche noise means Enterprse disks which have higher number of TB/year. at the same time as enterprise, for small that you can be, you should implement the 3-2-1 backup rules or at least having a backup site. the additional point is having a redundant power supply on your NAS.
        for the remaining part, what you said is perfect for a consumer site.
        REPLY ON YOUTUBE

      110. Thank you for the thorough video! Perhaps one other aspect to consider is the best way to increase space with a 4-bay NAS that has expansion capability. I have a 918+ with 4x4TB. Shall I replace the drives with 4x8TB drives, or shall I daisy-chain a second 4-bay NAS with another array of 4x4TB?
        REPLY ON YOUTUBE

      111. I’ve mentioned this before, but if you are shopping for Pro drives, the only way to go is enterprise (Exos, Ultrastar). Depending on region they are much cheaper and also better.
        REPLY ON YOUTUBE

      112. I have an 8 bay DS1821 with 4x 8TB. The rationalisation was that as my data needs grew I could either add more 8TB or on the basis that over time costs would come down start adding say 12TBs and through SHR move to an all 12TB RAID.
        So far so good.
        REPLY ON YOUTUBE

      113. Thanks Man! I know you since the days of my first NAS, a trusty old QNAP TS-269 Pro which is really a long time ago. And you are still passionate like day one about all things NAS and beyond, how is this even possible? Always great info, always on Top. Just Wow, yeah, just WOW and thanks for all the Seaguls. I would consider a video from you without “i hate seaguls” as beeing not authentic. yeah, i love this. ????All the best for 2023 and beyond! — Bernd
        REPLY ON YOUTUBE

      114. Can I use RAID at a software level (TrueNAS) with sata pcie expansion cards that are not RAID capable at a hardware level?

        I’m building my very first NAS with a PC I’m retiring in a couple of months, and my motherboard does not have enough sata for the number of HDDs I want, there are a lot of sata pcie expansion cards on amazon but many of them say they are non RAID cards, so I’m not sure if I should buy them, if TrueNAS will be able to set the HDDs connected through that card in a RAID configuration.
        REPLY ON YOUTUBE

      115. Appreciate the mention that if you buy a number of the same drive from the same vendor you are likely to get drives from the same lot which if that lot has a problem means your risk for trouble is increased.
        REPLY ON YOUTUBE

      116. In general, would it be better to go with a 2 Bay NAS with two 14TB WD Red Plus drives (larger capacity but still on the quieter side), or a 4 Bay with smaller drives? This is just for home use for storage and streaming videos.
        REPLY ON YOUTUBE

      117. It would be really interesting to me if you could make videos at regular intervals for things like When will the price of hard drive come down and when will we see bigger capacities in the small classes.
        REPLY ON YOUTUBE

      118. Nice video!
        I always calculate the price per TB. 😉
        As that way there is often a HD-size (and above) that the price per TB is higher than the smaller/previous-size one. (price per TB)
        We often opt for a wee bit smaller but more drives. As we always have 2x cold standby HD’s (thus unused!) near the NAS.
        But more drives also means more power-use as you already indicated and also more heat. (more cooling might be needed)
        Business-wide you should replace your HD’s every 3 years (5 years, max) but for the average user at home, you replace when really needed. (or after 10 years?)
        To reduce risks, we also opt for multiple NAS. As a NAS may fail (power-supply, firmware-upgrade, bricking)
        With larger drives the rebuilding of the RAID also may take longer., when something does go wrong.
        BTW, also worth noting, the weight of the NAS might become significantly higher when you are using more drives (noticeable after 8x drives IMHO)
        Generally speaking, the 6TB and lower are robusts as rocks (longevity), 8TB to 10TB are often the sweet-spot for pricing in my experiences.
        Word of advice: buy as many drives as can fit in your NAS as down the line by the time you want to buy additional drives, the manufacturer may have moved-on to newer models..
        REPLY ON YOUTUBE

      119. Factoring in that I had a stack of unused drives already, my first Synology was a 12 bay. I filled it with 1tb-6tb drives and was golden since that meant I didn’t need to buy drives until I needed more space(which happened, again and again ????)
        REPLY ON YOUTUBE

      120. I think it really depends where you are and what you can get. In some countries, it’s cheaper to get bigger drives and a two bay NAS, where other places, smaller hard drives and a four bay NAS ended up being the better option. I’ve always tackled it as a your-mileage-may-vary scenario.

        Although if you want maximum capacity, a bigger NAS is the way to go.
        REPLY ON YOUTUBE

      121. I bought a 14 tb red plus and there’s a high pitch noise that runs all the time while the drive is on. It’s quiet in terms of clicking and other typical HDD noises but the high pitch noise is driving me insane
        REPLY ON YOUTUBE

      122. Lost 3 wd red drives in the last 5 years ( 2 x 3TB and a 4TB ), all under warranty, but cost £50.00 to get 4TB replacement before I shipped back the faulty one, so I could repair my nas before sending drive back.
        Won’t be buying any more WD red.
        Not lost any other manufacturers drives in that time.
        REPLY ON YOUTUBE

      123. I’m wondering what, if anything, WD (and Seagate) is doing about Synology scaling back support for 3rd party drives in their products. It’s got to impact bottom lines in some way.
        REPLY ON YOUTUBE

      124. I know you did mention this problem in an older video but Western Digital did a dirty and I still have a few of the drives on a redundant NAS. The CMR v.s. SMR scandal. I swore by WD till this came out and I did not know why my array was so slow to rebuild on test or failure. One SMR drive in an array would slow the rebuild to about a week instead of a day. This gives a much larger chance of another failure that could trash the array. I now no longer depend only on WD .
        REPLY ON YOUTUBE

      125. Thanks for doing these tests and making this video, but. It may have been more useful if you did the tests and then recorded your audio separately afterwards. Also taking that 25db off the meter means that we have to mentally try to add 25 onto a moving meter to work out how loud things actually are. Most people, will be mentally thinking about 30-40-50db, but see 12 and have to add 25 in their head to see how loud it is. We never actually heard the sound of the drive. If you hadn’t done your audio at the same time, you could have boosted the mic on the drive so we can hear what kinds of sounds it was making (whine, hum, clicks etc). The type of sound matters, not just the levels. Some people say the WD make a more high pitched sound compared to Seagate for example. Some say WD sound is more annoying, but also easier to dampen down in a case.
        REPLY ON YOUTUBE

      126. I got a WD Mybook 16TB — its SOOO NOISY it sounds like starting up a windows 1995 computer! is that normal? (i heard they use Reds.. just not the pro ones…. in these mybooks and its only 1 day old so dont fancy opening it and not able to get return/replacement!)
        REPLY ON YOUTUBE

      127. I have an old Qnap 6 bay nas. It has x2, 92mm fans in it. The noise is ridiculous from it. Yes it’s old and yes it isn’t how it was when it was brand new I’m sure BUT…..I made two mods to make it work much much better. I swapped out the 92mm cheap and terrible fans for some Noctua NF’s and I also used my dremmel and removed some of the grill that obstructs the spinning fan blades as I felt it would increase the CF value.

        Would you please consider a video dedicated to this? Get something old….at least 5 years old and measure the noise using the original chassis fans….then swap the fans for a pair of Noctua or Be Quiet! fans and compare and contrast? The value for money is astonishingly good value. My NAS is orders of magnitude quieter now and I can not even hear it unless it’s under load. Before, just on tick over, it was just too loud!
        REPLY ON YOUTUBE

      128. Please just focus on all NAS manufacures to make 5gbe or at least 10gbe the minimum. 1gbe or even 2.5gbe is like 10 year old tech… Who seriously give a shit about a noise test when the lame ass nas is running at 10 year old speeds.
        REPLY ON YOUTUBE

      129. My two 16TB Toshiba MG08 make quite a lot of noise inside of my QNAP TS-364. After moving the QNAP OS to a SSD RAID1 at least they go to sleep when not in use (if you’re doing any kind of virtualization, containers. plex they will never spin down), but damn as soon as you start writing/reading you can hear them work. Sure, they are amazing for the price but I still need to find a way to make them more living room, or in my case BEDROOM compatible. I’ve already added some velcro tape to the sides which significantly reduced the vibrations which are being amplified by the plastic NAS housing. Any ideas? The fan is my least concern, I even have a spare Noctua I could swap it for.
        REPLY ON YOUTUBE

      130. Insightful video, couldn’t hear much sound difference between drives!? Please could you do a similar comparison for regular NAS tasks. I’m really looking to know if SSDs are worth using. Would be forever grateful ????
        REPLY ON YOUTUBE

      131. Your test is not correct. You calibrated your “sound meter” down to 6-10 dB which is impossible in a normal environment. You will be hard pressed to find an environment thats under 20 dB. You talking shows ~30-40 dB which is not correct, its more like 45-60 dB. Its not exactly wrong, one can add ~+20 dB to your results and get a real picture of how much SPL is there since the ratio is still correct. In any case, do not equate “silence” to your ears to 0 dB, it is not. We cant really hear under 10 dB so if you have “dead silence” in a room you are probably in the range of 10-20 dB SPL depending on the frequency.

        Im an environmental protection engineer and i specialize in noise measurements.
        REPLY ON YOUTUBE

      132. I am not really sure how calibration of any amount is going to make any difference. The drive noise will still be relative to the background level, which in your room very likely was 20dB on that meter. The calibration would have just calibrated ALL the readings down by the same amount…… Also, noise inside an enclosure, including any resonance, is important.
        With that said, I have found the WD Red Plus drives to be fairly quiet when compared to the Pro drives when used in real world installs in Synology NAS devices. The spin-up generally is quite reasonable, but the noise from the steppers driving the heads is quite loud on Pro level drives I have used when compared to the Plus.
        REPLY ON YOUTUBE

      133. Thanks for this video, i was worried about my 16tb wd red, it’s in a fractal brand computer case and the drive ebay is a bit loose so it makes a lot of rattling noise each time it wakes up from sleep mode, the drive is steady secure screwed in the sliding tray but the tray vibrates in the drive bay slot and makes a lot of metal noise.
        REPLY ON YOUTUBE

      134. bought a WD Red pro 16tb for my Zapitti…..not too bad when i play my SD tv shows….. prob is when i play my larger 4k movie files….. knocking noise can be heard across the room>>.,,,, getting most annoying???….
        REPLY ON YOUTUBE