2.5 GbE USB adapter for Synology

Is there a 2.5 GbE USB adapter for Synology?

Before Aquantia based PCIe cards and adapters used to work. But Synology saw people using Qnap components inside Synology, so they blocked this chip. But realtek seems untouched still.

Yes, looks like bb-qq has made this possible. Also someone in Germany has put this into practice. I have added videos and links bellow from these. I will update you when I test this myself. And you will also see an article and video.

Here is what I found so far.

2.5GbE USB adapter for Synology

 

https://github.com/bb-qq/r8152

Realtek based USB3-2.5Gbps: https://github.com/bb-qq/r8152
Aquantia AQC11U based USB3-5Gbps (QNAP QNA-UC5G1T): https://github.com/bb-qq/aqc111

DSM driver for realtek RTL8152/RTL8153/RTL8156 based USB Ethernet adapters

This is a RTL8152/RTL8153/RTL8156 driver package for Synology NASes.

Supported NAS platform

  • DSM 6.2
  • apollolake based products
    • DS918+ (confirmed working)
    • DS620slim
    • DS1019+
    • DS718+
    • DS418play
    • DS218+

You can download drivers including other platforms from the Release page and determine a proper driver for your model from this page, but you might encounter some issues with unconfirmed platforms.

I very much appreciate if you report whether it works.

Supported RTL8156(2.5Gbps) based devices

Currently I only confirmed products marked “confirmed working”. If you got other products and they do not work, please create a issue with its vendor id.

  • ASUSTOR AS-U2.5G (Type-C, confirmed working)  USA   UK
  • Plannex USB-LAN2500R (Type-A, confirmed working, Japan only)   USA   UK
  • Buffalo LUA-U3-A2G (Type-A, confirmed working, Japan only)USA   UK
  • CLUB 3D CAC-1420 (Type-A) USA   UK
  • TUC-ET2G (Type-C)  USA   UK
  • CableCreation B07VNFLTLD (Type-A)USA   UK
  • Plugable 2.5G USB C and USB to Ethernet Adapter UK   USA 
  • StarTech.com USB 3.0 TYPE-A TO 2.5 GIGABIT  UK   USA 
  • Sabrent 2.5GbE USB Adapter NT-S25G  UK   USA

Aquantia AQC11U based adapters

  • USB 3.0 Type-C to 5GbE Adapter (QNA-UC5G1T) by QNAP

 

How to install

  1. Go to “Package Center”
  2. Press “Manual Install”
  3. Chose a driver package downloaded from the Release page.

Detailed instruction is here.

 



If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  

☕ WE LOVE COFFEE ☕

Or support us by using our affiliate links on Amazon UK and Amazon US
     

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

Leave a Reply to flyingeagleCancel reply

68 thoughts on “2.5 GbE USB adapter for Synology

  1. Thanks so much for this video. It was really easy to understand and follow. I did have some installation issues and had to install/un-install/re-install the driver software a couple of times (even after entering the additional commands via SSH), but it’s working great now. I’m using the CableCreation (Realtec 8156 chip) adapter I found on Amazon. No issues when restarting the NAS. My DS920+ running DSM 7.2 immediately goes to 2.5 Gbps. I’m getting 250-270 MB speeds. I have one of the DS920+ 1 Gbps ports plugged into my switch just in case I have a problem, but so far so good. Too bad Synology makes us jump through this hoop to get 2.5 Gbps Ethernet when every other NAS company has 2.5 Gbps Ethernet as standard

    Hey Synology, how about this. 1 Gbps on the J series, 2.5 Gbps on the value series, 2.5 Gbps (upgradable to 10 Gbps) module/PCI slot on the Plus series, and 10 Gbps on the XS series as a new standard to get you back in the game. Your DSM software is really good, but without quality hardware, you’re falling behind.
    REPLY ON YOUTUBE

  2. Does not work for DS920+ DSM 7.2.1. When I enter “sudo install -m 4755 -o root -D /var/packages/r8152/target/r8152/spk_su /opt/sbin/spk_su” into SSH, I get error: “cannot stat ‘/var/packages/r8152/target/r8152/spk_su’: No such file or directory”. Any suggestions?
    REPLY ON YOUTUBE

  3. I have a DS918+ with one 3.0 port at the rear and one at the front. I run my UPS usb cable into the rear and use the front port for backups. Could you make this work with a hub or something to run but the 2.5GbE adapter and the UPS cable into the one rear port?
    REPLY ON YOUTUBE

  4. Can I get 2.5gbps USB network dongle to function on a relatively new DS224+ so I can hook it to my 2.5gbps switch? (I have 2 Linux PCs, and soon a 3rd, connected to the switch @ 2.5, primarily for rsync backups of backups). I saw someplace, someone saying that DSM 7.2 blocks these… I hope not. My 224+ is running DSM 7.2.1-69057 Update 3.
    REPLY ON YOUTUBE

  5. Long-term update. I’ve been running 2.5 GBE with a CableCreation adapter ($35 US Amazon) on a DS920+ for about six months now with no unusual behavior, no hangs or reboot required. I keep one 1 GB port set up on a different IP address in case this one ever fails but so far no issues whatsoever and I get reliable 240-250 Mb/s via SMB without jumbo frames.
    REPLY ON YOUTUBE

  6. thank you for your video, I just have question, on GitHub they tell we can configure the Nic, with this two commands : ethtool –set-priv-flags eth2 “Thermal throttling” off // ethtool –set-priv-flags eth2 “Low Power 5G” on…. I ve typed in my terminal but don’t know really if it s ok, could you add and explain this in your video ?? thanks a lot
    REPLY ON YOUTUBE

  7. Thanks for the video, as usual the most informative. Accomplished the procedure on a 1621+ with 2.5Gbe usb adaptor and works like a charm. However, as usual, the speed is limited by the hard drive R/W speed, but surprisingly using SSD cache in read/write mode (even for the Plex server) did boost the transfer speed from 80Mb/s to 140Mb/s over web browser in Windows 11. I also disabled all “jumbo frames” which tends to slow down transfer speed for some reason.

    One problem I cannot get the solution for, Windows 11 doesn’t allow the SMB connection off the bat I did notice in your video that it did on your machine. Sure would be nice if you could provide a quick video on the fix for that because I am surely not the only one.
    On my MAC, SMB transfer is now up to 400Mb/s.
    REPLY ON YOUTUBE

  8. DS920+ I used the TRENDnet TUC-ET5G, TRENDnet TEG-S750 10G switch, Broadcom 57810S PCIe card, and Cat8 ethernet cables. $320 for everything plus a couple hours configuring. Runs rock solid 275 MB/s
    REPLY ON YOUTUBE

  9. Thanks for the video. Apparently the support for 923+ is not there yet from bb-qq. I tried installing r8152-r1000-2.17.1-1_7.2.spk for 2.5gbe twice but failed. If you come across anything, would be greatly appreciated.
    REPLY ON YOUTUBE

  10. I only have a single NIC (2.5Gbe) on my PC. Have connected it directly to my NAS and getting sustained read/write speeds of 283 MB/s which is great. I set the USB adapter in the NAS as 10.0.0.10 and it also has the internet connected to one of the supplied 1GBe ports on the NAS.

    How do I bridge the two, so that I can access the internet on my PC via the NAS? Or do I need two NICs in my PC?

  11. I have the QNAP 5 GBe adapter, a DS920+ running DSM 7.2 update 3. I’ve downloaded the DSM 7.2 driver from github for the gemini lake processor in this NAS. The isntall fails the first time but the command to fix the install cannot find the /var/packages/aqc111 directory. Can someone help me understand what I am doing wrong?
    REPLY ON YOUTUBE

  12. G/Day there m8 i have a ds420j synology nas and i am struggling to to install the USB Network drivers. i cant seem to located the correct file to install .. can you please help me
    REPLY ON YOUTUBE

  13. i would like to have know the performance of this 5gbe . most files are a minimum of 4gb i think changing the file size to make the benchmark look better is wrong .
    because if on large files you are only getting 150 to 200 its not worth buying the 5gbe Qnap . at 100 pounds . when you can get a 2.5 gbe and it do the same thing
    REPLY ON YOUTUBE

  14. Thanks, I managed to install the driver on a Synology 1813+ configured as SHR+2, with DSM 7.1.1-42962 Update 6. The connection with Trendnet 2.5 shows as 2500Mbps, then installed the volumes from the IP address of the new connector , but the maximum transfer speed is a little less than 1Gbps… Something could be missing?
    Partially it works but if the speed is less than 1 gigabit it doesn’t make sense. ????
    REPLY ON YOUTUBE

  15. I had hoped that enabling link aggregation of the existing dual 1GB NICs on my NAS would double my connection to 2.0GB but I’m learning that it only enable two different computers to talk to the NAS simultaneously at 1GB each. 🙁 Not sure I want to hack in a 2.5 GB USB NIC…. But the video is great if I ever change my mind.
    REPLY ON YOUTUBE

  16. Hello my friend, thank you for your video, I have a Synology DS223 with a ‘Realtek RTD1619B SoC’ processor. Is it possible to connect using this method? I dont see the driver on that web. 🙁
    REPLY ON YOUTUBE

  17. So to upgrade my DS920+ to 5gb . Am i right in thinking i need a 5 gb switch and a 5gb adapter ?
    Also will my asus rt-ax88u work ok with this? or do i need a 5gb port router ?
    This sounds expensive what brand would be most cost effective for this upgrade.
    REPLY ON YOUTUBE

  18. I inadvertently upgraded to DSM ver 7.2 … will this work on that version … oh yea the armada chip used by my nas has 2 7.1 version drivers ??? I don’t know why …thanks
    REPLY ON YOUTUBE

  19. Thanks, you saved me hours of debugging because the original GitHub installation was missing the information that we need to RUN the damn driver package before we can use it. And I feel so stupid that I forgot to do it on my own.
    REPLY ON YOUTUBE

  20. You’d think by now, you’d just be able to hook it up via USB directly without all this faffing about. Got my adapters ordered, hopefully see some improvement ????
    REPLY ON YOUTUBE

  21. Wonderful video. Worked great to get my old DS1513+ that I use for backups working on my 2.5GbE network! Used the Asus USB-C2500 adapter and it worked pretty much just as easily as you showed here.
    REPLY ON YOUTUBE

  22. Noob here. If my network speed is under a gig Is there a point to doing this upgrade? Do I need to put an adapter on my router or mesh system connected to my adapter on the Nas to get those speeds? Thanks
    REPLY ON YOUTUBE

  23. I did it exactly the way you suggested, the new LAN Connection is showing up under Network in DSM shows the full 5000 too, I set the LAN3 to DHCP and here is the problem, the Synology Assistent isn’t finding the new connection, it always shows me one only, the original one, any ideas?
    REPLY ON YOUTUBE

  24. Firstly – thanks for the video. After watching your reviews for some time I have now fully invested in to Synology hardware (both routers, access points and NASes), and I must say that it’s amazing decision. Thanks for that!

    A quick question – does similar method shown in this video is available to add an additional 2.5/5Gbit ethernet to the Synology WRX560 router?
    REPLY ON YOUTUBE

  25. Get QNAP QNA-UC5G1T its Marvell tech inside instead of Realtek, Linux ready and so its plug and play, only 5Gb is with Marvell, don’t get fooled by the 2,5 Version – its realtek and it will fail
    REPLY ON YOUTUBE

  26. PS: @9:42, it is strongly recommend to type “exit” in the command-line to logout the SSH session, not “just” closing the SSH Client software.
    As not all SSH clients will close the active SSH connection when you close the SSH Client.
    Security above all!
    REPLY ON YOUTUBE

  27. Thank you for the turotial.

    Worked fine with DS218+ and CableCreation‎ CD0673 (https://www.amazon.com.au/gp/product/B07VNFLTLD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1)

    However, I have one query and I probably know the answer.

    Is it possible to do Link Aggregation with DS218+ eth port and USB-eth port?

    I do not see any option in Control Panel – Network – Network Interface – Create

  28. Also worked with DS 1817+ Avaton core CPU with r8152-avoton-2.15.0-5.spk at Plannex USB-LAN2500R (Type-A, Japan only)