How to Install and Setup Tailscale on a QNAP NAS

How to Install Tailscale on a QNAP NAS

Keeping the data as secure as possible is probably one of the most paramount concerns of any NAS owner. Everyone wants to make sure that their data cannot be accessed by unauthorized individuals, but at the same time want to make sure that their hardware can communicate with their NAS for backups and general access as conveniently as possible. This is a balancing act that has always been difficult for NAS brands and owners to facilitate. Ensuring that access is as tight and secure as possible, whilst at the same time, giving users the flexibility in control to allow the most remote access they might need. Although most NAS brands, including QNAP, provide the means to set up remote access via the brand’s own service, a lot of users prefer to use their own established remote access tools they already use alongside sophisticated VPN services. This is where Tailscale and its recent official support on QNAP NAS is such a big deal. Widely regarded as one of the best remote access VPN tunnel services out there, as well as being remarkably user-friendly, Tailscale has grown in popularity quickly. This combined with growing security concerns around ransomware attacking your NAT system, means that setup for Tailscale on your QNAP NAS is both well-timed and extraordinarily desirable. In today’s article, I’m going to talk you through how to set up Tailscale with your QNAP NAS, as well as a few extra hints and tips on setting the device up perfectly for remote access across all of your client devices.

(Optional) – Create a Tailscale account and install the apps on your hardware

Before you go ahead and set up Tailscale on your QNAP NAS, you are going to need to create a Tailscale account and set up at least one client: PC/tablet/phone with Tailscale. You could do this later, but it will make things a little bit more complicated. Additionally, if you already have a Tailscale setup on your devices and already have an account, you can skip this step.

• Head over to tailscale.com and create a new user account. Tailscale is free for small-scale use and for low numbers of clients and volume use, though if you are going to utilize it in a much larger capacity of users, clients, and services, it is recommended to go for one of the paid subscription tiers.

• After you have created your Tailscale account, it is recommended that you have Tailscale installed on one of your home local client devices. In short, this needs to be a device that you are intending to communicate with the QNAP with via the encrypted tunnel of Tailscale. You can head over to the Tailscale download section and select the relevant client installer for your OS or platform.

• From here, you simply need to go ahead and install the downloaded installer to run the Tailscale client on your local hardware client. Then just log in with the credentials you created earlier. It is also recommended that you head over to tailscale.com via your web browser and approve this device to be added to your list of available machines.

• You are now ready to start using Tailscale, the encrypted tunnel between all of your devices in a singular directed encrypted network remotely. Next, we need to go ahead and install Tailscale on your QNAP NAS.

Setting up Tailscale with QNAP NAS

The first thing you’re going to need to do is head over to the QNAP app center and find the Tailscale application. Until recently, if you wanted to install Tailscale, you needed to use the unofficial app center QNAP club, or utilize container-based installation. However, now in the latest software and app center updates, you can find Tailscale easily and ready to install as a one-click installer.

• With the software fully installed, you can go ahead and open the application from the app center itself or from your normal range of listed applications on the QNAP NAS. Unlike a lot of other applications for NAS, when you run this application, it will open into a new window and simply have a single option to add this device to your list of Tailscale approved devices. If you went ahead and created your Tailscale login earlier, or already have one in place that is logged in by this web browser, clicking this button will immediately add the QNAP NAS to your Tailscale device network.

• Once you have added this device to your list of Tailscale approved devices, you are still going to need to verify and approve this device from the Tailscale side. In order to do this, you need to log back into Tailscale, select my devices, and then approve this device via the clear approval button.

• That’s it, you can now begin creating the network of devices, each with Tailscale, to have access to this NAS. It’s also worth remembering that depending on the setup and configuration of your QNAP NAS, you may need to add an extra bit of information to the login URL to precisely access the GUI by the web browser on your QNAP NAS. So, if this is the case for your setup, don’t forget to add the port. And do you include the slug to the end of the login details, like so:

How to use your QNAP NAS as the VPN gateway for all of your devices.

Much like most other VPN services that run on NAS platforms, there is also the option to use the NAS as a VPN server gateway for all of your devices to pass through. In brief, this means that all of the Tailscale devices in your network, rather than directly accessing the internet as normal, will access the internet via the QNAP NAS remotely and use the QNAP NAS as the main doorway. This is done by heading back into your Tailscale-installed QNAP NAS, and clicking the Tailscale application icon once again:

• Doing so will open a new tab and unlike before when you were invited during the installation to set up the tuner for the first time, this time you will be invited to set up the QNAP NAS as an exit node. This means that it can service as the gateway for your VPN traffic connected via Tailscale and through the QNAP NAS.

• You will know that it has worked, as your QNAP NAS will appear as an ‘exit node’ on the list of devices on your Tailscale account.

What to do if Tailscale disappears from your network adapters?

Once you have installed Tailscale on your local computer for accessing the QNAP NAS remotely via this secure VPN tunnel, a new network adapter choice will appear alongside your usual network connections in Windows or MacOS. Traditionally, that means that you’re going to see a wired network adapter, a wireless network adapter, and now a Tailscale adapter. This is what easily allows you to enable and disable Tailscale encryption on your transmission as and when you want it between your devices. However, some users have reported that when disabling the Tailscale network adapter, it can disappear from the list of available network adapters and prevent access to some Tailscale devices remotely.

In order to resolve this, it is recommended to head into the program manager of Windows (and equivalent in MacOS) and click on the Tailscale application. Doing so will open up a new window that offers you the option to uninstall the app or repair the application. Select repair and, after a few minutes and a slow-moving green bar, Tailscale should reappear on your list of network adapters. This resolves the issue, allowing you to continue using Tailscale to communicate between all of your encrypted tunnel devices.

I hope you found this guide useful, and if you still need further assistance and guidance on this, please use the video below where we’ve walked through how to install and set up Tailscale for the first time on a QNAP NAS:

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔

🔒 Join Inner Circle

This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

Need Advice on Data Storage from an Expert?

Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry. TRY CHAT Terms and Conditions   Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

☕ WE LOVE COFFEE ☕