Top Jonsbo N2 NAS Builds for £250, £500, £750 and £1000

Last updated on 07 Sep 2023 📧 Subscribe
Contents hide
1 Best Jonsbo Builds for $250 / $500 / $1000 (or Pounds, or Euros!)
1.1 Jonsbo N2 Build Disclaimers
2 Best Jonsbo N2 Build for Under/Around £250
3 Best Jonsbo N2 Build for Under £500
4 Best Jonsbo N2 Build for £750-1000
5 Need Advice on Data Storage from an Expert?

Best Jonsbo Builds for $250 / $500 / $1000 (or Pounds, or Euros!)

This is a guide on building your own Jonsbo N2 NAS for less than £250, £500 or £750-1000. With many of us feeling the pinch these days due to global financial issues affecting most of our wallets, it’s unsurprising to hear that many users looking to host their own private server are increasingly drawn to going full DIY. Despite the numerous alternatives out there in the market to build your own NAS drive from scratch, one brand has really built a great reputation for itself – Jonsbo, with its range of compact but exceptionally well-built NAS cases. One particular case that has drawn praise is the Jonsbo N2 case, a 5-6 Bay SATA enclosure that is very easy to build and of quite a high-quality standard, given the price tag. However, the case is only part of building your first NAS, and many users aren’t quite sure of the best components to choose and the best power-to-price ratio they need to consider. Your device may need to be on for days, weeks, months, and years at a time, so choosing the right components on day one is going to be crucial. Today, I want to go through three distinct but impressive Jonsbo N2 builds, that can be built for less than 250, 500, and 1000 pounds. Let’s go through some great Jonsbo N2 NAS builds.

Note – If you want to watch a FULL BUILD TUTORIAL of the Jonsbo N2 NAS with an Intel TopTon Mobo, you can watch our video HERE or use the detailed Step-by-Step Guide HERE.

Alternatively, you can find the video of this article, where we show each of the builds, plus commenting on possible alternatives – HERE on YouTube

Jonsbo N2 Build Disclaimers

  • $ / £ / Euro / etc – You probably already noticed that I have had to jump between currencies several times in this guide. This is because lots of users worldwide are going to read this guide. Additionally, many of the components might work out cheaper if purchased in your own region (eg Intel CPUs, especially 12th and 13th Gen are cheaper in the U.S than most of Europe). Additionally, currencies right now at the time of writing are getting closer and closer in value (thank you Global Recession…sigh). So, although the prices are going to differ from country to country, I have had to play a little fast and loose with $500 and £500. Please forgive this, but I am trying my best!

  • Does not include storage media – everyone’s storage needs are different. Some may want to fully populate the device on day one with a couple of drives for redundancy, while others might opt for a more conservative two-drive build in a mirrored array, and then add drives gradually over the years. Therefore, it’s practically impossible to include storage media in these build guides. However, if you are interested in choosing the best value storage media for your Jonsbo N2 NAS build, we recommend the Seagate IronWolf 4TB NAS hard drives ($81 at time of writing) and WD Red Plus 10 TB hard drives ($189 at NewEgg) for the best price per terabyte in the market. These two options in this 5x 3.5″ NAS Case would result in £405 for 20TB (16TB RAID5) and $949 FOR 50TB (40TB RAID5). Alternatively, you can use our price per terabyte deal calculator below, which daily checks the prices of hard drives across several retailers and helps you find the best price per terabyte for your needs:

Click Below to use our Price per TB Hard Drive Calculator:

  • Shipping and tax not included – We weren’t able to include the cost of delivery and tax in the following Jonsbo N2 NAS builds. Depending on where you live in the world, shipping and availability of the items described in these builds will differ significantly, so we can’t estimate shipping costs. Tax rates and amounts will also vary from country to country. So, while we’ve included tax in some component prices for export reasons, not all components listed below factor in tax.
  • NAS software not included – The allure of DIY is often the lower cost compared to turnkey solutions like those from Synology or QNAP. But this means you’ll need to find your own NAS software. While many free options are available, like TrueNAS and Open Media Vault, some are subscription-based, like UnRAID. For fairness, we haven’t included the cost of NAS software, as choices will vary among users.

Best Jonsbo N2 Build for Under/Around £250

This is often seen as the budget build for your Jonsbo N2 system. The list below provides a reasonably powerful Plex media server, the ability to run a compact and capable UnRAID server, a few robust container applications, and even lets you set up a combined NAS server and prosumer router using proxmox and pfSense, alongside your chosen open-source NAS software.

Jonsbo N2 + TopTon Intel n5105 Celeron / Pentium n6005 Build (+$35)
  • Jonsbo N2 Case ￡74.04 – Check Amazon HERE – Check AliExpress HERE
  • Topton N5105 + 128GB NVMe + 4GB RAM ￡193.48 – Check Amazon HERE – Check AliExpress HERE
  • SATA 6 Connector ￡4.19 – Check Amazon HERE – Check AliExpress HERE
  • 400W SFX PSU ￡24.36 – Check Amazon HERE – Check AliExpress HERE

￡264.64 (128GB M.2 NVMe + 4GB RAM + 400W PSU)

(Optional/Swap) If you want to save some money:

  • Topton N5105 (NO EXTRAS) ￡159.82 – Check Amazon HERE – Check AliExpress HERE
  • Cheaper 250W SFX PSU ￡13.15 – Check Amazon HERE – Check AliExpress HERE
  • (needed for cheaper PSU) SATA to Molex Adapter ￡0.78 – Check Amazon HERE – Check AliExpress HERE

￡247.47 (no M.2 NVMe and Cheap PSU)

Note, you need an SSD for TrueNAS OS (USB for UnRAID)

(Component Prices and eShops – 9 Images):

This build, just a bit over 250 pounds, offers a well-built base system, 4 GB of memory to start, and an included gen 3 NVMe SSD for your boot drive. Additionally, it has four individual 2.5G Ethernet ports that can either be solely dedicated to your NAS or divided between your chosen NAS OS and router OS. If you’re on a tight budget or wish to save for storage media later, consider downsizing the PSU to a more economical 250-watt PSU and buying the memory separately. These minor tweaks might save you as much as 40 to 45 pounds, depending on the adjustments you decide on.

Pros:

  • Exceptionally affordable
  • Simple build as many components arrive pre-attached
  • Low power consumption
  • Several avenues for cost-saving
  • Components aren’t overcrowded, reducing heat concerns
  • Compatible with virtually every NAS OS available
  • Flexibility for dual OS to cover both NAS storage and prosumer router needs

Cons:

  • Underpowered for TrueNAS’s full feature set
  • Limited PCI lanes
  • Reduced M.2 NVMe support compared to other builds on this list
  • Not suited for extensive use or demanding business apps

Best Jonsbo N2 Build for Under £500

At this price point, things get serious! Even if you exclude storage media costs and focus on the NAS hardware itself, $500 is substantial for DIY enthusiasts, especially when considering the time spent building the device and buying components from various brands. But if you’re willing to spend up to $500 on your custom-built NAS system with the Jonsbo N2 case, you’ll find a decent amount of flexibility. The subsequent build balances both internal and external performance against your budget. Moreover, the configuration below is priced around $450, allowing you some leeway in either saving extra cash, adding storage, or upgrading existing components (e.g., memory or network ports).

Jonsbo N2 + Intel Core i5 12th Gen + 16GB RAM + 10GbE Build
  • Jonsbo N2 Case ￡74.04 – Check Amazon HERE – Check AliExpress HERE
  • SATA 6 Connector ￡4.19 – Check Amazon HERE – Check AliExpress HERE
  • 400W SFX PSU ￡24.36 – Check Amazon HERE – Check AliExpress HERE
  • B660M ITX Motherboard £235.79 + Intel Core i5 12490F CPU + 16GB RAM – Check Amazon HERE – Check AliExpress HERE
  • ARGB CPU Radiator Fan (LGA1700) ￡13.38 – Check Amazon HERE – Check AliExpress HERE
  • (better option for CPU Fan) Noctua NH-L9x65 CPU Cooler £49 – Check Amazon HERE – Check AliExpress HERE
  • X540-T2 Intel Chipset PCIe x8 Dual Copper RJ45 10Gbps ￡39.34 – Check Amazon HERE – Check AliExpress HERE
  • Tbkoly Controller Card Motherboard Expansion Card 1 To 5 Port SATA £20.45 – Check Amazon HERE – Check AliExpress HERE
  • (Optional) 2x M.2 NVMe PCIe 4 X 8 Card GLOTRENDS Dual M.2 PCIe 4.0 – Check Amazon HERE – Check AliExpress HERE

Total 390.44 (i5 CPU + 16GB RAM + 2x10GbE + 400W PSU + Case + Cables)
Note, you need an SSD for TrueNAS OS (USB for UnRAID)

(Component Prices and eShops – 8 Images):

This design of this build is significantly more future-proof than its predecessor, but it comes with increased power consumption. The build takes advantage of newer generation PCIe lanes, boasts more cores than the previous design, and confidently supports adding top-tier NVMe SSDs to your storage system in the future. It’s essential to note that this build requires a more hands-on approach. The base network port will need an added network adapter card to expand ports or boost existing port bandwidth to 10G. Finding off-the-shelf motherboards in mITX form with numerous Ethernet and SATA ports that also support modern Intel Core processors can be challenging. Because this design demands an Intel i5 12th gen CPU, the motherboard only features four SATA connectors. The Jonsbo N2 case accommodates up to six SATA drives, so to maximize this on this motherboard, you’ll need a PCIe SATA card with two additional SATA ports. Another option is to buy a different motherboard that supports more SATA connectors but sacrifices network speed, CPU support, or other features.

Pros:

  • Lots of power for Plex and virtual machine use
  • Full support for all major NAS software platforms
  • Great for a medium or growing Plex media server
  • Support for 2x NVMe SSDs for cache, Plex metadata, and even a separate SSD volume
  • Option to upgrade to 10Gbe networking, depending on your future needs
  • Lots of room for RAM upgrades

Cons:

  • High power consumption and increased heat concerns
  • Requires an additional PCIe card to maximize SATA drives
  • Limited PCIe expansion due to the inclusion of a PCIe x1 and PCIe x4 slot
  • Reduced options for processor upgrades, given the choice of the motherboard

Best Jonsbo N2 Build for £750-1000

For those who want to build a NAS that rivals even the best off-the-shelf models available today, the following $1000 build offers some incredible performance. With this budget, you can get a truly formidable Plex media server, a robust virtual machine host, and even full surveillance with support for over 40 cameras (assuming you’re using an appropriate NAS software platform). The Jonsbo N2 NAS build is a powerhouse, providing enough capability for nearly any home or small business task.

Jonsbo N2 + Gen4/5 MoBo + Intel Core i5 12th Gen with Int Gfx + 32GB RAM + 10GbE Build
  • Jonsbo N2 Case ￡74.04 – Check Amazon HERE – Check AliExpress HERE
  • SATA 6 Connector ￡4.19 – Check Amazon HERE – Check AliExpress HERE
  • 600W SFX PSU ￡43.78 – Check Amazon HERE – Check AliExpress HERE
  • Asrock Z690M-ITX/AX gEN 4/5 Motherboard £171.20 – Check Amazon HERE – Check AliExpress HERE
  • Intel Core i5-12600K 12th Gen £239 – Check Amazon HERE – Check AliExpress HERE
  • Re: CPU, features: 1 x 2.5 Gigabit LAN
    802.11ax Wi-Fi 6E Module
    1 x PCIe Gen5x16 Slot*
    4 x SATA3 6.0 Gb/s Connectors
    1 x Hyper M.2 Socket (M2_1, Key M), supports type 2280
    PCIe Gen4x4 (64 Gb/s) mode*
    • 1 x Hyper M.2 Socket (M2_2, Key M), supports type 2280
    SATA3 6.0 Gb/s & PCIe Gen4x4 (64 Gb/s) modes*
    * Supports NVMe SSD as boot disks
    * Supports ASRock U.2 Kit
  • Corsair VENGEANCE LPX DDR4 RAM 32GB (2x16GB) £59.99 – Check Amazon HERE – Check AliExpress HERE
  • ARGB CPU Radiator Fan (LGA1700) ￡13.38 – Check Amazon HERE – Check AliExpress HERE
  • (better option for CPU Fan) Noctua NH-L9x65 CPU Cooler £49 – Check Amazon HERE – Check AliExpress HERE
  • X540-T2 Intel Chipset PCIe x8 Dual Copper RJ45 10Gbps ￡39.34 – Check Amazon HERE – Check AliExpress HERE
  • Tbkoly Controller Card Motherboard Expansion Card 1 To 5 Port SATA £20.45 – Check Amazon HERE – Check AliExpress HERE
  • (Optional) 2x M.2 NVMe PCIe 4 X 8 Card GLOTRENDS Dual M.2 PCIe 4.0 – Check Amazon HERE – Check AliExpress HERE

Total £586.63 (Amazon) + ￡123.51 (Aliexpress)
Note, you need an SSD for TrueNAS OS (USB for UnRAID)

(Component Prices and eShops – 9 Images):

At the core of this design is the Intel i7 12th gen CPU, boasting six cores and twelve threads. Complementing this, the motherboard has full support for up to 128GB DDR4 memory (with prices still fluctuating for such large kits). But even with 32GB or 64GB kits being relatively affordable, it provides an excellent base for this system. For networking, the base board has two 2.5GbE ports, with the option to upgrade to 10Gbe using a suitable PCIe network card. However, similar to the $500 build, you’ll need to make some compromises if you want to maximize SATA drive connectivity due to the limited SATA ports on the motherboard.

Pros:

  • Extremely powerful for almost any task you throw at it
  • Full support for major NAS software platforms and high-end features
  • Outstanding Plex media server performance
  • Abundant RAM support
  • Flexibility in networking, from 2.5Gbe up to 10Gbe

Cons:

  • High power consumption
  • Likely overkill for casual or home users
  • Requires additional PCIe card to maximize SATA drives
  • Significant heat production, making adequate cooling essential
  • Expensive

Conclusion:

Building a Jonsbo N2 NAS system is an exciting project, allowing you to tailor the system to your specific needs and budget. Whether you’re aiming for a budget-friendly media server or a high-powered machine for intensive tasks, the Jonsbo N2 case provides a solid foundation. Always remember that while building the hardware is crucial, choosing the right software and ensuring that it runs seamlessly is just as important. As the NAS market evolves, DIY solutions like the Jonsbo N2 builds will only become more prevalent, offering enthusiasts and professionals alike more flexibility and options. Happy building!

Jonsbo N2 NAS Build with TopTon Board Build (Complete Guide) – UnRAID/TrueNAS (click below)

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕
       
      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      ASK YOUR QUESTIONS HERE!

      393 thoughts on “Top Jonsbo N2 NAS Builds for £250, £500, £750 and £1000”

      4. I bought a Topton computer on Aliexpress and I was so angry with myself, it was a poor quality product, without technical support, it was money thrown away. If you want some advice from a friend, look for another brand.
        REPLY ON YOUTUBE

        Reply

      5. Loved your vid, TrueNAS is a bit sketchy to first setup but does it job after a while of tinkering. The 6 port sata controller based on the ASMedia 1166 chipset is the way to go? Works great with TN instead of the JMB585… Don’t cheap out on that one. I used a PCI x4 card, neater and cleaner with cables. And btw, for the money and quality of parts stop using the Ali bords and just buy an Asus N100 or something… Good bios, great hardware and you can support local or national companies
        REPLY ON YOUTUBE

        Reply

      12. 6:20 You have seen nothing. I once received a server power cable packed in a box which was larger then the case box on your desk. Bit shorter but much wider. It was also packed in all kinds of bubble wrap. A fricking standard power cable! ????
        REPLY ON YOUTUBE

        Reply

      16. It would have been nice to speak to what each build is capable of. I’m thinking about building a nas but I have no idea if I’m putting something together that would be overkill
        REPLY ON YOUTUBE

        Reply

      20. So you get the unraid license for free? So your nas cost hundred bucks more. And it is an Motherboard and a io shield.

        And proxmox is a hypervisor and has absolutely nothing to do with network attached storage.
        REPLY ON YOUTUBE

        Reply

      24. That’s a great review of the LincStation (I have been given a sample to test too) I wanted to comment about your speed tests with and without cache. My first thought is that I wouldn’t want to lose a slot to cache given that 8TB SSDs are still very expensive, and that would knock 4TB off the array I have setup too, so what about using a 1TB USB drive and assigning that to the cache? I have a Basic Unraid license so I am even wondering if this can be done purely for testing purposes, will have to try it tomorrow.
        REPLY ON YOUTUBE

        Reply

      33. Thank you. I’d love to see the next steps: actually connecting the box to the internet and your in-house network and configuring the system to function as intended. Good job!
        REPLY ON YOUTUBE

        Reply

      35. Unfortunate the Asrock Z690M-ITX/AX is not easy to find anymore (Amazon uk/de don’t ship to Denmark and .se have almost nothing to offer. And the price has gone up quite a bit on Ali Express unless your willing to take a chance at a used board. To me the Z790M-ITX Wifi seems to the be the same board, just with DDR5. Also supports 12gen Intel cpu’s. Perifials seem the same as the Z690-ITX/AX Should there be any problems going with this board ? ( I can buy this new in local stores at a little higher price as your initial listing for the Z690 from Amazon.
        REPLY ON YOUTUBE

        Reply

      37. Helpful hints:
        1) first boot the motherboard outside of the case. If it is dead you don’t want to be wasting time installing it and routing cables
        2) never use a cheap USB drive. Use a Samsung Fit or Bar USB Drive. You can do a search for the guy who tested them out and they beat out the rest. I am not sure but I think you can clone the USB. If so get two so when the first one dies you are not scambling looking for configurations.
        3) update the BIOS. If the board dies it can be RMA’ed.
        4) Use the Preclear tool in Unraid on the hard drives before using them. Side note, if you want a really nice NAS case SuperMirco offers a 4 bay one. It is not cheap but it will last and also keep your drives cool. best of luck.
        REPLY ON YOUTUBE

        Reply

      38. back when i build my nas , i buy a full atx lga 1150 with 2pcie 16x 2pci 6 drives 4dim , for 70eu , and got a celeron for 40 that i later upgrade with i5 , got a 10gb nic , and still got a free pcie for gpu or extra storage , and house everthing in old style case that had 8 drive slot , and 4dvd slots , yes is bit bigger and you may need more time to swap a drive , but is much more powerful and upgradable ,
        REPLY ON YOUTUBE

        Reply

      40. It’s really crazy how budget you can go! ATM I’m looking at a total budget of 200usd for a NAS with 16TBs of storage in a raid 6 config no idea how I did it but it’s an amazing thing crazy utility.
        REPLY ON YOUTUBE

        Reply

      42. you deserve a like and sub
        give this man a like
        ????????????????????????????????????????????
        it’s rare to find legend people nowadays
        Thanks man that was super helpful
        ❤
        REPLY ON YOUTUBE

        Reply

      44. Wow. another great video. Thanks so much for all the excellent content. I’ve been gearing up to replace my old Dell PowerEdge r510 12-HDD server. It’s such a noise generator and power hog. I wonder if you could maybe do a video that focuses on daisy-chaining servers for more space. I don’t want to manage multiple Unraid instances. What I’d like to do is set up one server and then attach multiple SANs as my library grows.
        REPLY ON YOUTUBE

        Reply

      45. Thaks a lot for this! It made building my N2 NAS a breeze. Different motherboard, different power supply, but this video is an excellent resource in any case.
        REPLY ON YOUTUBE

        Reply

      48. Great experiments! May I ask What’s the power consumption of this DIY NAS? Also if we don’t mind put the power block into the case, can I use my old pc regular power block to power up this DIY NAS? Many thanks!
        REPLY ON YOUTUBE

        Reply

      50. In the days of lore, way back, when Drobo first appeared and later all the little NAS boxen were born; I decided that they were too expensive and way under-powered. Then I found a way to build my own home lab NAS, one where I could host containers as well as serve shares, etc. This predates Unraid and TrueNAS. Many pros were building rackmount 4U servers but then came along some very well suited m-ITX server boards. Supermicro, Asrock, Gigabyte, etc. The first build utilized Joyent’s fork of OpenSolaris and their base image called SmartOS, providing ZFS, Zones, networking, etc. in a private cloud. Then Linux became capable of the same (Joyent was bought by Samsung and development slowed). I switched to Ubuntu Server with LXD to manage native containers and VM’s and Microk8s for Kubernetes. I was even able to import my zpool. But now I am thinking I may switch to TrueNAS Scale and build a 3rd generation NAS with a Jonsbo NAS case. Newer m-ITX boards have come a long way. The advent of those M.2 PCIe SATA adapters, will free up the 16x PCIe slot allowing for dual 10GbE network card. Ultimately, home builds can be built for less but if you put a bit more power into the build, you get a lot more out of it. However, you will end up being more expensive but your NAS will be more of a home lab server.
        REPLY ON YOUTUBE

        Reply

      54. I have the same NAS case, and I’m curious about your hard drives’ behavior. Mine are always active and noisy, even when not in use. Do you experience the same issue with your setup?
        REPLY ON YOUTUBE

        Reply

      56. Would you make an episode about what’s better? UnRAID or TrueNAS? What gives more possibilities? What is updated more often? And what, in general, will be a better solution?
        REPLY ON YOUTUBE

        Reply

      59. Thanks for the great info. 
        I have just built my home made NAS based on this tutorial with Unraid and it is spinning away happily on my table.
        I deviated slightly by going with the Node 304 case which I purchased locally from eBuyer for £74 delivered and the same board with 4 GB memory and the 128 GB NVME from Amazon for £151. With the saving I also added a 10 Gbe PCI card from Ali Express for £71 and a Hisource 4 port 2.5 Gbe + 2 10 Gbe uplink ports for for £29 from Ali Express
        I have to admit that getting the 10 Gbe link working with Unraid (!***!) was a bit stressful, but everything now works as it should.
        Onwards and upwards and thanks again.
        REPLY ON YOUTUBE

        Reply

      63. Thank you so much for this detailed video. I used it for my own Jonsbo N2 build and it was so helpful with the step-by-step instructions and guidance on the gotchas. It saved me so much time to pre-plan. Excellent video!
        REPLY ON YOUTUBE

        Reply

      67. Hey, as this vid is 4 months old, I just wanted to ask if the mobo is holding out good? I’ve been considering it myself, just wondering if theres anything you found out later that someone looking to buy one may want to know before making a decision. Cheers for the good vid ????
        REPLY ON YOUTUBE

        Reply

      71. HI, Great vid! I must have watched this a few times now, and am currently building my own. Currently unable to track down the pdf for the header pin layout. Did you ever add the link in for that?
        REPLY ON YOUTUBE

        Reply

      79. This video is really well done. I have been trying to give an answer to this question for four years now. The problem is summarized at the end of the video. My time costs much more than what I save by building it myself “from scratch”. But on the other hand I am too stingy , and I like to build things myself. Frustration.
        REPLY ON YOUTUBE

        Reply

      83. The price of the shipping from Aliexpress not only varies, but can make or break your budget so it should definitely not be left out. For example here are the prices as of Nov 2023:
        Jonsbo N2 (Aliexpress): $93 + $97 shipping to the US = $190
        Jonsbo N2 (Amazon): $150
        Jonsbo N2 (Newegg): $140

        Jonsbo N3 (Aliexpress): $117 + $99 shipping = $216
        Jonsbo N3 (Amazon): $170
        Jonsbo N3 (Newegg): $162

        As you can see, if you are in the US it’s a no-brainer to buy the case from Amazon/Newegg as Aliexpress offers an inferior shipping experience.
        REPLY ON YOUTUBE

        Reply

      89. Can you confirm that the Asrock mobo will allow 4x+4x+4x+4x lane bifurcation? I cannot confirm it, and the HyperCard requires lane bifurcation to work. An ixt board with two onboard nvme drives plus 4 drives through pcie would be a killer compact, all flash, low power, portable nas.
        REPLY ON YOUTUBE

        Reply

      92. I am using my DYI Unraid server serveral years now. And I love it. Additional I installed or rolled out several synology NAS to very small companies. I find the biggest advantage to Unraid is also its biggest disadvantage -> Freedom of choice. With Synology I just buy the device I need for e.g. SMB Share and Client (Windows 10) backup and 1-2 docker. With Unraid it starts with which case, which PSU, which CPU etc. – When you start researching what hardware to buy, you easily fall into the rabbit hole. After hours you still have no shopping list for the unraid server.
        REPLY ON YOUTUBE

        Reply

      95. Just a couple notes on this as I have the same case. First if you did NOT use the angled sata cables on the backplane they won’t warranty the case. Second I found a flat dual molex adapter that saved me even more room. Between the angled sata cables (same slim blue your using with 90 degree one end), and the molex adapter I was able to replace that loud inefficient 15mm fan with the standard 25mm one. Also replaced those grates on both side with basic wire grills. Both those things got me better air flow as well as less noise.
        REPLY ON YOUTUBE

        Reply

      99. i’m a bit disappointed, your title said you were gonna build a NAS, but you just assembled a NAS :/ (i was expecting electronic component tinkering, not computer parts tinkering…)
        REPLY ON YOUTUBE

        Reply

      100. I have just built a TopTon board (Same version) with a Jonsbo case. One note is you can actually fit that board out with 64Gb Mem so Truenas has plenty of spare capacity. I also spec’d out a lot better power supply just for the peace of mind. Wish you had done this review earlier as I would have gone with the case you had.
        REPLY ON YOUTUBE

        Reply

      106. I’m a little confused… Did you show the correct extra parts (Re: video ~35:00)? Of the four parts shown, it seems that I would need (1) of the parts shown (top & bottom right side parts), but nothing from the left top/bottom parts. Additionally, if I select either top or bottom right side parts then I now have (2) 20-pin connectors (one from the front panel USB and one from the adapter (top/bottom right side parts)) which now need to go to a 20-pin + 20-pin splitter (not shown on your display of parts). Unfortunately, my Topton MoBo has not arrived yet so I can’t reference what is there in order to understand what’s what with all the parts you showed. Can you provide any more clarity to this? Thank you so much and thanks, again, for making this very informative video!!!!
        REPLY ON YOUTUBE

        Reply

      107. Investing that much time and effort probably isn’t worth it unless you have time to waste or very specific possibly high-end applications.
        Also, you may want to got get a more current ITX board + CPU for more performance and RAM in this case.
        Honestly for a simple setup like that it probably is better connecting something like a TerraMaster D5-300C or ORICO-NS500RC3 to a Raspberry Pi.
        REPLY ON YOUTUBE

        Reply

      108. I dont think you save so much time going turn key as you have to learn the software. Easiest is take an old machine, install Nas software learn how it fits in your life. Then upgrade hardware later. As a person whos built many computers, the hardware part wasnt the issue. Learning the Truenas/Proxmox/Unraid interface probably didnt take longer than the Synology interface. Now I have a machine which can grow cheaply if needed.
        REPLY ON YOUTUBE

        Reply

      109. Those front USB connectors are standard, USB3 and USB3.1 for the Type A and Type C connector respectively, and are found on most modern motherboards. That Topton board is made as cheaply as possible, so it only has basic USB2 connectors, which is why they wouldn’t fit.
        REPLY ON YOUTUBE

        Reply

      111. Totally a great replacement for another orange channel. You explain everything that you had to go through and other options to tackle those issues. Great vid! It s subscribe for me bud!
        REPLY ON YOUTUBE

        Reply

      113. I’m coming back in to re-review my overall thoughts on the N2. This past week I updated my hardware so I could utilize NVME, 10gbe and the 8500T cpu I had laying around.

        My reports – This case is not enjoyable for heat when thinking about NVME. My initial thoughts was that everything would be great. I had a proper cpu cooler and then also a heat sink for the nvme. Upon firing up everything looked great…..but then I got warnings. My NVME was getting to temps of almost 60c!

        I quickly shut the system down and pulled the shell off to make sure the heat sink was alright. Everything seemed just fine but after further thought I have always had airflow over the basic heatsink which make a bit difference.

        So what do I do?

        Luckily I had either a 140mm or 120mm BeQuiet! Silent Wings 2 fan laying around and jerry rigged it to the top shell and decided to blast the entire mobo with the airflow. CPU is sub 35c and the NVME is now sub 34c.

        Users Wanting NVME beware and reminder you HAVE to have decent airflow. The N2 simply is not great for airflow with NVME or other pcie adapters that generate any kind of heat.
        REPLY ON YOUTUBE

        Reply

      117. according to Topton, the pin headers on their motherboards (N5xxx and N6xxx) is only USB 2.0, were you able to confirm/deny it? The blue ports on the mobo however are indeed 3.x
        REPLY ON YOUTUBE

        Reply

      123. your antiquated selection is crap in 2023.
        Fractal Design Node 804 – Black
        MSI PRO B550M-VC WiFi ProSeries Motherboard
        Ryzen 7 5700G 8-core, 16-Thread Processor
        Thermalright AXP120-X67 WHITE ARGB Low Profile CPU Air Cooler
        Corsair VENGEANCE LPX DDR4 RAM 32GB (2x16GB) 3200MHz
        WD_BLUE SN570 1TB M.2 2280 PCIe Gen3
        IBM M5015 Array Card, Megaraid 9260-8i SATA/SAS Controller RAID 6G PCI-E x8
        INTEL Original X540-T2 Ethernet Converged Network Adaptor X540T2BLK
        8×3.5 drives, + 8x 2.5 drives & small cage
        REPLY ON YOUTUBE

        Reply

      125. Congratulations on the 100K it is quite an accomplishment. Brilliant video. Fantastic presentation. I have a big unraid system featuring a Xeon E3 with 16 bays. but I do EVERTHIING on this. I have never regretted building my own NAS.
        REPLY ON YOUTUBE

        Reply

      135. Beautiful build, nicely done, and I love the “on the cheap” side of things (so much, must be the Scottish in me ????) Makes me want to do this rather than get another Synology. I have the skills, but Synology just made things so “easy” that I got lazy. Thanks for the video and congrats on 100K! Here’s to the next 900K ????
        REPLY ON YOUTUBE

        Reply

      147. I built one from used parts on eBay, for the magic price of about £187, 10 SAS 2tb drives i picked up for 80 quid, Dell H200 perc 24 quid( needed firmware changing to LSI SAS 9210-8i ), the motherboard (FM2 with 8gb of DDR 3 and 500w PSU) came to together from what someone was tipping, 64gb SSD OS disk i picked up for around 7 quid, eBay again, the only build that was new was the Mini SAS 36Pin SFF-8088 to 4 x 29Pin SFF-8482 SATA Power Cable 0.5m 20 quid, 2 x Molex to 4 SATA power cable 10 quid and a new ATX case from Amazon for around 30 quid, i manage to pick up 6 BEQUIET 120mm fans for 16 quid, i used TrueNas 12 at the time, now been updated to version13, it runs as my SMB and plex server, its on a 1Gb Lan of which i can use nearly all of the bandwidth maintaining 110MB all the time download(single user at a time), at the end of the day, i really enjoyed building it, it was fun, Im planning on building more, good stuff
        REPLY ON YOUTUBE

        Reply

      150. I can afford to buy a branded NAS, but I prefer to go through similar to what you see in this video, not because I want to appear tech savvy, but because of the drinking involved during and after the build. I especially relish the heavy drinking involved when it fails and I have no one to blame but myself. Cheers!
        ????????
        REPLY ON YOUTUBE

        Reply

      152. Hi. I built your big NAS build. I would have two questions:

        A) I use Samsung QVO 8 TB drives. Is there anything I have to do / setup because I use SSDs?
        B) Your amazon Link to the SATA-Port Replicator says “Tbkoly Controller Card”, if I use the link it leads to “SaiDian 1 x SATA-Port-Multiplier Controller Riser Card Adapter 6 Gbit/s 1 auf 5 Port SATA 3.0 Motherboard”, there is no Tbkoly Controller Card on Amazon. I couldn’t find one and used the replacement instead, but it didn’t work. It works perfect if only one drive is connected, the second drive does not appear. Any idea, or like a new link to a working port multiplier?
        REPLY ON YOUTUBE

        Reply

      157. I got the same mobo (justo with the intel N6005)… there’s an internal USB port… just sayin its safer tu put the usb in ther so no one “accidentally ” pulls it out… huge mistake I made with going with a pico PSU… changed it to a 400w… no working fine… thank you for your videos! ther really helped deciding what to get!… went also with unraid
        REPLY ON YOUTUBE

        Reply

      158. “Best Jonsbo N2 Build for Under/Around £250”
        You need a maths lesson, parts included in this comes to around £300 not £250 (based on your pricing shown)
        Also pricing is a lot higher than you stated form the sources you stated, and you use both £ and $ which is confusing /constructive criticism use one or the other
        REPLY ON YOUTUBE

        Reply

      159. 49:16 Well I personally usually chek that 127 other things in the BIOS to make sure I don’t have to reinstall the whole system just because I changed something like SecureBoot only after I installed the OS. 🙂
        REPLY ON YOUTUBE

        Reply

      161. Hey – nice job here. There is also the value of the learning that is in depth – you can also upgrade individual components to go with as you need. The cost of upgrading a turn key is quite a bit larger – you have about the same 2x factor I think. Interesting – worth the hour invested to watch here!
        And congratulations!
        REPLY ON YOUTUBE

        Reply

      162. I ordered the parts for the 1.000 £ built. Thank you very much! I would have used your amazon-links (I actually did) but Amazon does not want to deliver anything to me. When I ordered, they asked me for a read-access to my bank account till the end of the year. So I had to order elsewhere. I think, you would need an amazon-alternative that is not 4 weeks away from my location.

        But anyway, great built! Looking forward to an five ssd drive nas, with 5*8 TB SSDs ????
        REPLY ON YOUTUBE

        Reply

      164. I just built one for my friend, N6005 + 16 RAM + H6 case + 1 TB NVME SSD + 250W PSU + Unraid Plus, and spent nearly £330.

        Of course, I was building this while in China, so the shipping cost is way lower, but spent another £25 mailing it to UK.
        REPLY ON YOUTUBE

        Reply

      166. Hey, I’ve been looking for an alternative to my NAS as mine is currently my old gamingpc, which is complete overkill and higher than ideal power consumption.

        Can I as, why this wouldn’t be good to use with TrueNAS at it seemingly fits their hardware requirements.

        I’m a bit new to all this, so please excuse me if this is a dumb question.
        REPLY ON YOUTUBE

        Reply

      169. I *loved* this build video. So much detail, great explanation, and it is clearly a done with love for this topic. I’d be interested in a similar build video if you can find a low-cost build with drive trays rather than those off rubber-pull attachments.
        REPLY ON YOUTUBE

        Reply

      172. It’s not just about the time spent. It’s about how much your data is worth. If you’re not thinking about things like patrol reads and notifications on disk failures. Rebuild processes for the array. Those types of things… you can end up with bit rot or data loss when not noticing hardware failures.
        REPLY ON YOUTUBE

        Reply

      173. It’s so weird to me that JONSBO is a brand of NAS now, when fifteen years ago JONSBO was a line of table lamps at IKEA. (Rather nice ones, too!)

        (Unlike a lot of other IKEA product names, JONSBO does not appear to be a Swedish placename, but there was a 20th Century Norwegian artist named Kåre Mikkelsen Jonsborg so maybe that’s the etymology idk)
        REPLY ON YOUTUBE

        Reply

      177. Pretty Nice Video of this build! But the most important question i have is how high is the power consumption ? Is it the same like the Qnap / Synology or is the power consumption much higher because Qnap / Synology did some optimization of their used components ?
        REPLY ON YOUTUBE

        Reply

      179. “Sorry Captain Planet” you had a few clever comments. I have a Synology DS213 that I now realize is 10 years old but it’s all I need with 2 1TB WD Red drives in hybrid. If I had the need I’d be into building my own.
        REPLY ON YOUTUBE

        Reply

      180. New to your channel. NASCompares and you’ve never built a NAS from scratch before?! You can build one better than any QNAP, Synology, etc. for less. As for the USB connectors from the case. They match EXACTLY what they are since one is USB 3.0 and the other is USB-C 3.2. There is nothing non-standard about them. The issue is your motherboard only has USB 2.0.
        REPLY ON YOUTUBE

        Reply

      187. Brilliant video! This is the best tutorial and guide I’ve seen for building a fully-functional, do-it-yourself NAS. I especially appreciated the step-by-step details, and your objective, brand and device-specific recommendations, evaluations, and critiques of each of the components. The Unraid solution allowing the use of such an enormous variety and size of SATA disk drives is likewise amazing. You have motivated me to take this on myself. Thank you! Now subscribed.
        REPLY ON YOUTUBE

        Reply

      194. Been down both paths for 20+ years. If I want to impress my peers I build my own servers. If I want to impress my family get a Synology. Played with Unraid to make hardware pass through setups with Windows XP/98 systems and 3DFX and Creative EAX cards and its an ongoing project, fraught with many many issues. They are fun projects, but you will get to the stage that other hobbies call you and a Synology is the way to go. After all, we don’t live forever and the kids will inherit them, so they need something less IT knowledge base intensive.
        REPLY ON YOUTUBE

        Reply

      195. I’ve been looking to upgrade my Synology to a DS423+ or similar, that’s what brought me here.
        But, from what I could see, this build is just not worth the cost or hassle when I can get a pre-built unit with Synology’s DSM that is basically plug and play. Great if you want to build your own system for the hell of it, but personally I just can’t justify the time.
        REPLY ON YOUTUBE

        Reply

      196. One recomendation I would make is using a way better power supply like an FSP or Sparkle to enhance the reliability and stability of the build (start with a good foundation) and to turn the power supply around so the vents allow the power supply to suck in cool air and the rear to exit the heat. Most newer motherboard do use the USB3 connectors provided by Jonsbo. The rest of the video is great. Congratulations to your subscriptions! Dr. Dave
        REPLY ON YOUTUBE

        Reply

      199. Hmm way less money then i thought. Built my own stuff sense my early teens but never looked in to NAS. Now days whit all the data we have on our hands this might be a good time to start my first NAS project. Grats on 100k and thanks for the info.
        REPLY ON YOUTUBE

        Reply

      200. What a fantastic guide! I THANK YOU!
        I’ve assembled PC last time probably 35 years ago – not many things have changed since then I can see.
        Btw why did you go with 5105 rather than 6005? No big price difference there…

        You have kept the t-shirt but you have changed the watch between the recordings – even 2 times !!! 😉
        REPLY ON YOUTUBE

        Reply

      201. The choice is pretty amateurish. Inexpensive, power-saving and fast enough for Plex with AV1 support is the Asrock N100M
        https://www.asrock.com/mb/Intel/N100M/

        Reply

      202. Die Auswahl ist ziemlich laienhaft. Preiswert, stromsparend und schnell genug für Plex mit AV1-Support ist das Asrock N100M
        https://www.asrock.com/mb/Intel/N100M/

        Reply

      203. Great video as always. I was just curious about something in the £500 build with the F CPU. I’ve never used an F CPU but I always thought that it would not boot or display video without a discrete GPU or does motherboard you mentioned itself allow video output maybe through the onboard VGA/HDMI/DVI port? I apologise in advance if it was already answered in other comments or maybe the seagulls addressed it in the video!
        REPLY ON YOUTUBE

        Reply

      206. I bought synology for moments and photos to get away from Google photos after they brought in their caps.

        But overall it’s fairly disappointing, I was expecting more updates and features. I’m here watching this to work out whether to sell my synology and just go with unraid.
        REPLY ON YOUTUBE

        Reply

      211. some times i think this man live on a boat and has the greatest stabilization software on the planet because the seagulls use him ass a pit stop. good content, i have a asustor and im not fallowing the 123 or 321.
        REPLY ON YOUTUBE

        Reply

      212. No, thank you for the fantastic video. Hope you hit 200k soon you guys deserve it. Really appreciate the thorough details My one tip would be to invest in a build mat for that poor old scratched table, helps dampen noise, stops things rolling, can be anti static or have a brand logo.
        REPLY ON YOUTUBE

        Reply

      213. Maybe its where your from, but here in the states, I think most of us would go for a cheap, used Asrock Rack or Supermicro motherboard and cheap used CPU. Will have to jump to matx, as itx server boards are harder to find used. My truenas build is a $100 supermicro board, $35 Intel 7100, 32GB of cheap used ECC ram. Has 3 pcie slots, 1 m.2 and 8 sata ports, 2 onboard NICs and ipmi to play with. Mine is just a file server, so pretty minimal horsepower needed. Pushes 10Gbe easily. Might need something a little newer if running apps/VMs, like an 8th/9th gen Intel with more cores.
        REPLY ON YOUTUBE

        Reply

      214. Thks Robbie buts I likes your Sabrent DS-UCTB 10-Bay USB 3.2 Enclosure (~US$350) Review a lot better or maybes the cheaper Mediasonic Probox 8 bay USB 3.0 HDD Enclosure (~US$250) ;
        Hey, I heard more from that Sea-Gull than Eddie lately (?Where’s the old Eddie-nator at?)
        Oh, justs-likes the Eddie-nator, that Sea-Gull shows-is quite enlightening 😉
        REPLY ON YOUTUBE

        Reply

      217. When you do the N3 NAS build it would be interesting to find out if the Asrock H610M-HDV Motherboard will fit, it is an m-atx board but is only 19.7 cm x 18.8 cm so might fit and would allow use of both PCIe slots.
        REPLY ON YOUTUBE

        Reply

      218. Congrats on 100k! This was an interesting video… I look forward to seeing you put it through it’s paces. It’s a shame that the Jonesbo case only holds five 3.5″ drives, though… if it at least held the full 6 that motherboard and cable supported, it might be more of a contender for my next upgrade dollars, once my 4-bay Synology is no longer adequate. (Doesn’t seem worth the money to upgrade and add only a single drive)
        REPLY ON YOUTUBE

        Reply

      219. I do like these DIY Nas Video a lot. Thank you. Please more!
        How reliable is all that „crap“ from ali express anyway? I have serious doubts that the 500buck build mobo will post without a gpu. And why all that questionable stuff anyway, why not a Corsair psu and a ie msi motherboard?
        REPLY ON YOUTUBE

        Reply

      223. The SATA cables for the Jonsbo N series cases must have right-angle plugs on one side. Don’t forget that.

        Those Topton (and other names) motherboards seem to be riddled with bugs and weirdly high idle power consumption (still low, but could be lower). Much like their pfsense appliances, they seem cheap and they have the right hardware, in theory, but it seems they have weird behaviors all around.

        Name brand motherboards can be finicky enough. While the chinese ones are cheap, I would not put one of those in charge of my data.
        REPLY ON YOUTUBE

        Reply

      224. the fact that we can even think of building a DIY NAS for 250$ is great, though at that budget I would really consider buying used (which I understand it was not the scope of the video), in the end CPUs, RAM, SSDs and cases do not really age, sometimes I even buy used HDDs if they don’t have a lot of hours on them and I can pick them up personally
        REPLY ON YOUTUBE

        Reply

      226. Shame that if you live in Denmark the case costs a whopping 40 quid in shipping (same online shop as the one used in the video for the purchase) while it ships free to the UK, which in reality turns it into a 140 quid case for me = budget build is not really an option….
        REPLY ON YOUTUBE

        Reply

      229. General advice: do not cheap out on PSUs, to some it might look like a waste of money but consider that the machine you are building has to last many years and will most probably be on 24/7 or almost, the PSU is not only in charge of powering your system but also to protect it, a short circuit or a power loss in the house can harm/kill components or even effect their lifespan if the delivered voltage (by the PSU) is unstable. Also when it comes to cheap PSUs do not trust what the label says, it is normally best to check out what the community’s suggestion is before pulling the trigger.
        Its fine to buy a 25$ PSU, but please consider the downsides, in my view my HDDs and hardware (and arguably data) are worth and extra 20$ even for my low budget.

        The video war really helpful though, will there also be a video regarding the setup (software side)? I’m still hesitant to build my own NAS mostly because I’m not sure how difficult it is to replicate various services offered by synology and qnap (like Synology Drive easily available on PC and Smartphones) and how secure it would be on something like TrueNAS and others
        REPLY ON YOUTUBE

        Reply

      235. I watched this vid and got the Tipton, I can’t work out how to turn down the fan header which seems to run at full whack all the time which is annoying, I don’t see it in the bios only the cpu. Is there another way to control the fan header?
        REPLY ON YOUTUBE

        Reply

      236. For a future video, I would be interested to know how that Jonsbo N2 case handles the heat of a 13th gen i3 or i5 or i7. Does it throttle badly? Does it cook the drive underneath?
        REPLY ON YOUTUBE

        Reply

      241. I’ve built many computers over the years. For me, assembling the hardware is fairly easy, configuring the software/OS is what will be a challenge for me. I have two old synology NASes and they’re ok. I’m looking to upgrade, so having the option to build a new NAS is a good thing to have. Knowing me, I probably won’t build because the software seems like something I would have to invest time into learning (and I don’t have the time unfortunately). The detailed guide on the website is really good and I will be bookmarking it in case I change my mind.
        REPLY ON YOUTUBE

        Reply

      245. Congrats on 100k subs! I also built a NAS/HTPC (with TrueNAS) in this case recently. For the most part, I love it and would absolutely recommend it for DIY NAS/HTPC builds.

        Regarding the not-so-quiet case fan: if your motherboard has an extra fan header, connect the fan to that instead of the drive backplane. The backplane has no speed control and runs it at 100% speed 100% of the time. But hooked into the motherboard you can set the speed in the system’s BIOS. Mine now runs very quietly while still keeping the drives at 30-45°C (depending on load).

        My only gripes with the case are:
        1/ I wish the shank (the unthreaded part) of the bolts for the drive track grommets were longer so that they could be screwed in tightly.
        2/ Why is the dust-catching mesh only on the side grills of the motherboard section but not on the top grill? It should be the opposite since the top is where most air intake will be happening and the sides would be exhaust (or they could have put mesh on all the grills). I removed the mesh from the sides of the motherboard area and hot-glued a mesh to the top.
        3/ Too many different bolt types for the exterior. One part has Phillips thumbscrews, another has small hex flat head bolts, another has Phillips truss head bolts, and still another uses the standard Phillips hex head case bolts. If those hex flat head bolts were Phillips instead, the whole case could be managed with a single Phillips screwdriver. And the truss head bolts could have just been standard case bolts.
        REPLY ON YOUTUBE

        Reply

      248. Just to point out the metal thing you call “backplane” is actually called “i/o shield”. There’s a backplane on this case though and that’s the green board on the drive bay where you connect your drivers.

        TrueNAS would’ve worked, although it’d have complained about not enough memory. it would’ve probably been fine though.

        And congrats on 100k subscribers mate.
        REPLY ON YOUTUBE

        Reply

      250. Actually great to see this option being shown, between an off the shelf ready to go NAS and a rack mounted NAS (but not everyone has the space for 1U, 2U or even 4U racks). I might go down this route next time.
        If you can find one get the Intel N100 board instead, for a little more money (coz it’s newer) it’s way more powerful then the N5105, I’m running pfSense on the Intel N100 as my router, but I haven’t seen a board only version on Aliexpress yet although the search is terrible, it’s just what I’d do, especially if you wanna run lots of containers or CCTV recording, the N5105 can do that just fine, coz I’m doing it on my QNAP TS–464, just thinking more longer term.
        Robbie, one thing that might be worth testing is PSU orientation and temperatures, I see you put the fan facing inwards, would be interesting to see if temps on the motherboard and in fact drives were higher or lower if the PSU was facing out through the case vents, and thinking about after seeing Gamers Nexus test a Fractal Design mini ITX case, if there’s any sound difference the orientation.
        REPLY ON YOUTUBE

        Reply

      251. Robbie, how about a video where you give us a glimpse of your upcoming videos and open the comments to request videos. I watch a lot of your older videos as I tackle new projects and find that many are out of date due to software updates, many need clarification ( I need the Step By Step Guide For Complete Idiots type instruction), and asking questions generally gets no replies from anyone.
        REPLY ON YOUTUBE

        Reply

      252. Nice project but some improvements are possible. For example some cable management should be in order in the space behind your fan. As it is now the cables are obstructing the airflow to the Sata backplate. And the airflow is already disputable as it is with such constructions. And by the way: that “backplate” is also known as an i/o shield.
        REPLY ON YOUTUBE

        Reply

      254. Great video, exactly what I was looking for.
        I would like to point out a detail that was left out about the total cost, standard low budget PSUs normally have abysmal power efficiency under light load which means that the PSU could even pull double the required wattage from the wall (so, half goes to waste because of inefficiency), over a span of 5y this could add up to a substantial difference in the final price.
        (this is based on the fact that normally a NAS comes with a 12V power supply which is designed for that type of load while a standard PSU for PCs has 3V, 5V and 12V rails and the unit normally has its peak efficiency around 50-65% load)
        REPLY ON YOUTUBE

        Reply

      256. I’ve been thinking about building a NAS myself but conflicted with platform. I want storage but also the ability to run a plex server and a small vm or two for system monitoring and other random things.
        Would a topton N6005 board suffice for this or, do I need to go with a ryzen 5700G?
        REPLY ON YOUTUBE

        Reply

      261. Great video, and congrats on the 100K although I’m only just finding the channel now. Currently running 3x Buffalo Linkstation units on RAID 1 each and looking for something to increase my capacity/drive use efficiency and this has been a huge help. Any recommended 6x 3.5″ bay cases out there?
        REPLY ON YOUTUBE

        Reply

      263. Great Video. I got motivated to build my own NAS, but when I checked out current prices on the recommended parts, I ended up with a $500 shopping cart on Amazon. Bummer. I guess word got out. That’s generally what happens. Still looking to keep the cost to about $250 – $300 . . .
        REPLY ON YOUTUBE

        Reply

      264. Does any air actually flow out between the drives? I mean, that’s the point of that case fan right?

        Why would you run the OS from the USB stick? Wouldn’t it be considered better practice to use the nvme or the last sata for a small ssd?
        REPLY ON YOUTUBE

        Reply

      269. I may have missed it, but was there a power consumption figure mentioned for this? PSU efficiency is quite important when you’re leaving something running 24/7! I was tempted to build one with a pico itx psu but daisy chaining power connectors is very frowned upon to get the necessary molex/sata connections!
        REPLY ON YOUTUBE

        Reply

      273. Nice video, thankyou congratulations to 100k subs. I am horrified by the psu. This thing looks like fire hazard, I would not connect anything to it. Was probably the cheapest shit money could buy.
        REPLY ON YOUTUBE

        Reply

      274. Wouldn’t it be better to put the power supply the other way around, so the fan is drawing the air through it’s dedicated grill on the NAS side? Or there was a particular reason to not do that that I haven’t noticed?
        REPLY ON YOUTUBE

        Reply

      280. Fun! Wish I had build it like this myself last year, but that motherboard didn’t exist back then. Man, what a beautiful case. Mine is huge.

        Just as you’ve described, both NAS solutions have their ups and downs. I like both. My Asustor has been nice to me. The ones I built are used to back it up.
        REPLY ON YOUTUBE

        Reply

      289. Another great video, and congrats on the 100K subs.
        You’re gonna have to do A LOT more content with this new bad boy. Detailed setup, apps, containers etc. Can’t wait for more!!!
        REPLY ON YOUTUBE

        Reply

      302. Thank you so mutch @Robbie and eddy for the great videos and geting to 100K you both deserve this and more @NASCompares ps how about a DIY nas with a APU 8 or more cores and 32 gig of ram or 16 gig 6 m.2 0r 6 sata ssd`s and a nic 2.5 or 5 or 10 gig so on you get what i mean then plex test it with a vm and prox mox thanks as ever Kenny
        REPLY ON YOUTUBE

        Reply

      303. The sad thing is that buying a modular PSU and short cables, in order not to have to deal with cable management, would cost more than the entire build.

        I really would ike to see a standard to make PC builds as cable-less as possible. Think about HP and lenovo workstations, or the old Mac pro.

        Congrats on the 100K milestone.
        REPLY ON YOUTUBE

        Reply

      304. Great video! I’d love you to do a higher spec version of this video and see what you can put together on a £1000 budget. Even if it’s just a demo of what components you’d put together on that budget without the actual build! Would be great!
        REPLY ON YOUTUBE

        Reply

      305. It’s not the peace-of-mind that’s worth the difference in price between the home built unit and a, say, Synology unit. It’s the support you get on an off-the-shelf unit and, specifically with Synology, it’s the software suite; DSM and all the wonderful Synology packages.
        REPLY ON YOUTUBE

        Reply

      308. So the total cost in cash terms (but not time clearly) would be in the same order as say a TERRAMASTER F4-423 at around £450. So on that basis what does your DIY approach offer over the prebuilt solution? ????????‍♂
        REPLY ON YOUTUBE

        Reply

      311. Thanks for the video and congratulations on reaching 100k subs. Definitely a major landmark for any channel.

        I’d be very interested in how this compares to the Storaxa if that ever arrives.
        REPLY ON YOUTUBE

        Reply

      312. Congrats!
        You’ve read my thoughts with this DIY NAS. But I had some doubts about noise level of each part (PSU fan, motherboard fan, etc.), then got tired of reading reviews for each potential part of this build… Finaly, I’ve bought terramaster and cleaned up my shopping cart at Ali. )))
        REPLY ON YOUTUBE

        Reply

      315. Robbie, thanks a lot for doing this! I have a couple of questions: (#1) About 23:18 you stacked up all the PSU wires (of the DOA PSU) behind the fan intake guard. Are you concerned about the reduced airflow from the cabling obstruction, and if not, why not? (#2) The RMA PSU came without cables, how did you handle that? One last note, your closing comments on being time rich-money poor and the expertise needed to do all of this are GREAT! So many people just forget about all of that and it’s really important to remember. Thanks again for another very informative video.
        REPLY ON YOUTUBE

        Reply

      317. Thanks! After being retired for 8 years from IT at a fortune 50 company, I have spent the last 6 weeks watching network and nas videos on YouTube because I got a knee replacement and have lots of time. @Nascompares is one of the better channels and to celebrate thier 100k here’s a tip. If you can afford it, you can too!
        REPLY ON YOUTUBE

        Reply

      319. Yeah, Roll-your-own!… Here goes, DSM.7.2 with RedPill on Xeon E3-1226, 16GB Ram, 10 Sata ports (6 active now), two NVME drives) and a Four Port 2.5GB LAN. All for less than that NAS board plus its ram!. Oh, Container Manager in 7.2 is just brilliant!.
        REPLY ON YOUTUBE

        Reply

      320. Greetings from Germany. I also discovered your channel a few months ago and subscribed. Congratulations on 100k subscribers. I like to watch your channel and it has also helped me in the decision which NAS I buy and then landed on the Synology DS 920+. Self-build is no longer an option for me. I used to assemble my PC myself, but that’s long gone. The professionals can still better assemble a system than me and it’s enough for me if I then only perform the one or other upgrade.
        REPLY ON YOUTUBE

        Reply

      321. Congratulation for you 100k subscribers, well done.
        Just a stupid question. Why did you install the PSU with the fan pointing into the housing instead towards the housing? At least I would have installed it the other way around so that it could freely suck or blow air directly outside…
        REPLY ON YOUTUBE

        Reply

      327. I subscribed when there were only a couple thousand subs. I thought to myself that this channel would never break 10K because NAS is such a small market. But here you are, 100K. Congrats!
        REPLY ON YOUTUBE

        Reply

      330. Congratulations mate. I’m a recent subscriber, and I don’t watch every video (I mainly skip the ones on low-end NAS’s like the Synology 225X or whatever, as I know I’ll never get those), but you’ve provided great information and even when I feel I have a pretty different lean on a lot of things, I enjoy it nonetheless.

        And here I was expecting the 100K special would be Robbie embarking on The Great Seagull Massacre of 2023. Maybe an idea for 200K!
        REPLY ON YOUTUBE

        Reply

      337. Congrats! Pretty soon you can slap a shiny plaque behind you, or maybe make a NAS case out of it!. A channel I run needs just 8k to hit 100k. Man is it slow going once you start watching the subscriber count 😀
        REPLY ON YOUTUBE

        Reply

      338. This was fun…nice to see you build that in an hour ????

        Would have been nice to use a faster motherboard with more memory that can handle more complex VM duties… This seems like something you’d find in prebuilts
        REPLY ON YOUTUBE

        Reply

      339. Congrats on 100K subscribers.
        Yeah, I can easily see 10+ hours of build time which at any reasonable hourly rate would easily add $200 to $400 dollars unless one was doing it as a learning experience and was extremely cash poor and time abundant (a student or someone laid off in a severe recession). Reminds me of the old Heath Kits for radios and other electronic devices. Even if one would do it once, would one do it twice, let alone half a dozen times? I am still puzzled by the price disparity between a laptop and a NAS. If I go to my local Target department store I can see laptops from an i7 all the way down to a Celeron. A NAS doesn’t have a large screen or a keyboard why does it cost more to manufacture than a laptop? Or the disparity between a NAS and an Apple Mac Mini. A NAS is brain dead, but has lots of storage, while an Apple Mac Mini has lots of processing power, but little storage and needs a “Time Machine” (which Apple no longer manufactures) for backup. Perhaps there is a synergistic setup between an Apple Mac Mini and a NAS. But, unless there is a new Apple product announcement Docker X86 is crippled on Apple Mac Mini with Apple Silicon (M1, M2, etc) and one is dependent on a limited and aging supply of Apple Mac Minis (which are soon going to lack security upgrades).
        REPLY ON YOUTUBE

        Reply

      342. I get the budget objectives of this build but personally I’d want a more standardised components setup. Brand name PSU for sure (e.g. seasonic sgx-500 fully modular), a major brand ITX or matx mboard running a recent gen intel (for transcoding ability so no need for gpu) and a matching case to suit either a storage or performance server bias or both. Unraid has the flexibility for sure I have mine on a 12 year old system running backup for other devices as its main function. I was going to throw it out for ewaste otherwise but it got me thinking with the case it was in being about to hold 10 hdds. That’s often the first time you come across unraid when you wonder what do with old hardware after an upgrade.
        REPLY ON YOUTUBE

        Reply

      346. congrats on the subs! great video. How high are the heatsinks on the mobo? I have an ye olde HP microserver with nice pro-level drive caddies that I’ve been wondering about updgrading for a while. In the microserver the proprietary size HP Mobo has 30mm high heatsinks, and is squeezed in under the drive bays at the bottom. Do any of the BKHD mobo heatsinks/connectors stick up higher than that? Might work if I can urge the microserver case to develop a new hole for the backplane.
        REPLY ON YOUTUBE

        Reply

      365. I wish I would have know about Unraid before I bought my expensive qNap. Not shortly after I purchased, they had the issue with the software and many qNaps being bricked unless you paid to unlock. I did my research first on the NAS but never considered or thought about building my own from left over parts. I have had nothing but problems in which the company did not know why and them not wanting to replace. So now to ensure I have all my data, I off sync weekly to a cloud system till I am able build an Unraid System for myself. What irritated me most was how my network was a home private network that the qNAP allowed invaders now into my home. So then after, i watched more videos of how to keep my self protected; did what they asked and had issues with creating their containers for pfsense then to the qNap to be told, my model is too old or missing the necessary specs. Well, it turns out to be my specific qNap — that has the issues not specifically the model. The help is not there from qNAP if the warranty is gone. That to me made me realize its better to build your own know everything is possible. Now I am looking to turn my qNAP into an unRaid once i figure out how to do it. When I found about SpaceInvaderOne — I watched all his videos from the beginning to current and was amazed with the community that was there willing to help. But I enjoy the discussions! Thanks
        REPLY ON YOUTUBE

        Reply

      367. I think I can make a good comparison, since I am using 2 x qnap NAS one is TS473A with 32GB ram and 2 x NVME plus 4 x 4TB SSDs and the second one is only a 2 Bay 8GB ram 2 x 12 TB hdd, at the same time as a main home server I am using an Unraid with 3900x AMD 64GB ram 4 x 8TB U.2 zfs pool with a couple of NVMe caches without a reel Array, since an Array is too slow for me. I like really QTS especially QuTS Hero, because it is really very straight and easy to use. As a normal Nas just for file sharing using smb, qsync, hmb backup and a couple of small.comtainers it works very well, but sometimes I get crazy because it gets too slow since the compute power is really very bad. You pay 1000 bugs for only quite good nas like TS473A with 32 ram, then you get a terrible cpu which stocks if it needs to make parallel a couple of works. But in case unraid I can for same price much better hardware, besides that you can make thanks speceinvaders videos nearly everything what you need for a server and consumer pc.together. you can expand unlimited and use every app.docker or vm. Sometimes it is a little bit difficult to understand why it should be exactly that way, but this is really not a con. The TS473A is working with my unraid almost redundant, all shares are being synchronized immediately and the Ts231 is only for backup, which has no regular internet connection. Qnap has very good mobile apps, for example qsync is in my opinion one of the best in its class or qfile, since I am using still qfile if I am outside, instead unraid with vpn. The snapshots in QuTS are just fantastic compared in umraid, because in unraid it is not so easy and managable like in qts. Finally I recommend both unraid and a turnkey Solution, since a turnkey solution is good for backup and file-sharing, but who wants to make experiments on a home lab cheaper then they should try unraid but for unraid and co. You need o bring some linux knowledge
        REPLY ON YOUTUBE

        Reply

      370. I just watched this video from techone about how most modern raid systems don’t properly correct bit rot or parity errors. This was shocking to me. Seems like only ZFS provides the error checking and correction and all of these NAS systems are not protecting our data? Please provide your opinion on this problem.
        https://youtu.be/l55GfAwa8RI
        REPLY ON YOUTUBE

        Reply

      374. After more than 12 years of Synology (1621+ was the last one), I’ve been using an Unraid system for 4 months and don’t really look back to Synology. For users without interest to look under the surface, Turnkey is 100% the right choice. Unraid and similar systems require an interest in the system. In principle, you have to have a basic understanding of Linux. The more, the better 😉
        REPLY ON YOUTUBE

        Reply

      376. Great discussion. Ed’s the best.

        Both solutions definitely have their benefits depending on your need and desire for tinkering. I got started with Unraid on a old PC and it’s been great getting me started down the rabbit hole. Obviously, spaceinvader has been invaluable. I’ve since bought a DS923+ to get familiarized so it can eventually be set up for remote backup at the parent’s house. Definitely seemed to be the best solution to set up for them as something that they can also actually use. Honestly, I might keep a synology around in house just for Photos as it seems to be the best option for my needs that I’ve come across so far. Otherwise, the flexibility of unraid is just what I want for everything else. And, yes, it’s fun.
        REPLY ON YOUTUBE

        Reply

      378. Both paths have big plusses and minus to them and it comes down to what someone *really* wants when managing their data.

        The big differentiator for me though is usually when things don’t go right. For instance, sure you can buy an HP retail server to then install Unraid, or other, onto it. But the thing is when you are having issues what help and support will you get from HP when it goes wrong. In so many cases with mixed environments I’ve seen one provider point the finger at another. So one really has to be careful with what warranty one actually gets when you go off reservation. In a lot of cases 1st party manufacturers will require a specific software install to be present before they’ll even help you. Support costs actually make up a surprisingly large part of a unit’s overall cost.

        As for having to send your turnkey NAS in to the manufacturer for any sort of repair. Yes that’s entirely true and often for such small things. That said, for many of the Synology NAS devices you can get the extended warranty for something like $50. This not only give extra warranty but it also opens the door whats of greater value to me and that’s the expedited exchange service where once an RMA is agreed, Synology will send give you the option of having them send you out a replacement *BEFORE* you need to send in your RMA device. You then have 28 days to get the RMA device back to them. This is handled with Synology directly and not through your reseller/wholesaler.

        The other big differentiator is the ease at which you can get high system density. Yes, you can DIY yourself some very dense systems but the easiest way to get it is with turnkey. I don’t know about anyone else but my floor and shelf space costs money.

        PS My Synology RS1221+, 2 x DS620slims, RT6600ax wifi, Ubiquiti DM-SE and 24 PoE switch all operate in under 100W.
        REPLY ON YOUTUBE

        Reply

      379. I don’t think you should talk about winners here. Both solutions have a different approach to the same problem. I have a little experience with TrueNAS and I’ve been looking to move to unraid, but it required time investment to do the things I want, while a turnkey solution has them out of the box with little configuration. If someone who’s not tech savvy ask me for what NAS to get I would tell them a turnkey, but if it’s someone tech savvy I’ll definitely point them to any of the free solutions (and he probably has an old pc lying around to use). It almost feel like, do you want take out or do you want to learn to cook, one is easy the other takes time but in the long run is more rewarding. And also, when I was job hunting, putting in my curriculum that I know how to deploy a NAS, even if it was not relevant to the job, it gave me some talking time to at least show I can self teach me things and pretty much gave me the title of the tech guy (for better or worst).
        REPLY ON YOUTUBE

        Reply

      382. Excellent comparison video. Great high-level overview of each platform. Thanks!

        Just bought my first turnkey solution for ease of maintenance and low power consumption, but as a tinkerer, the UnRAID DIY environment speaks to my heart.
        REPLY ON YOUTUBE

        Reply

      383. I had Unraid before going to Synology DSM. The reason I switched was because I found installing apps/dockers on Unraid to be unnecessarily complicated. One really has to know their way around Linux to make it work. Synology DSM is just easy and I can install all the apps I need.
        REPLY ON YOUTUBE

        Reply

      384. Space invaders videos have helped me learn unraid and the videos have been invaluable. I love unraid! I tried truenas scale and I couldn’t get any apps or VMs to work, and OMV is kinda underpowered especially on a Pi4 (which is what started me down this road)

        If turnkey floats your boat, do it. If an old Pc as all you can afford, do it. I built a modern NAS using a fractal define R5 and a couple 8 terabyte ironwolfs
        REPLY ON YOUTUBE

        Reply

      386. awesome conversations with very smart people, both of you; as “turnkey” nas user (and very happy about it) i will continue using it, but i do understand the point of spaceinvaderone during the conversation.

        P.S. i found the turnkey nas, as fun as the builted from scratch ones; servers are awesome
        REPLY ON YOUTUBE

        Reply

      388. Great video. I’m on team turn key but I think we could add “hardware reliability”. Thanks to the fanless power brick and low heat emission we have an extra layer of durability and reliability.

        Although it was a great video to peek in to Unraid. Looks fun to play around on used parts.
        REPLY ON YOUTUBE

        Reply

      390. considering im buuilding a NAS tester box, this is a great vid for me to get ideas of alternates to my great Qnap box, i already know there are limitations of it, but i use the poor thing to its limits, and already need more storage as 32TB doesnt seem to be enough for my wife, holy crap she can fill that box up. (my ripping bluerays and stuffing the mildly compressed MKV’s dont help i guess.
        im glad i moved to a RAID box, i already had 1 scare where drive 3 had a super minor glitch and the raid took it offline for me to check, and rebuilt it back after i found there was nothing wrong and has been working flawlessly ever since, im sold on these types of solutions. oddly enough even being in the tech field since ’80’s i still never bothered with RAID even though i owned IDE raid card, i never even tried to use it beyond a simple IDE controller. well, im trying it now.
        it is my opinion, if you are buying a NAS settup and only plan on having a couple of terrabytes or loading it up with drives smaller than 10TB, do NOT waste your time with turnkey.
        i also dont like the idea of TK NAS boxes using chips old enough to be in my old dell netbook.
        i would like more info on using boxes like Qnap’s jbod boxes (ie: TL-D800C or TL-R1200S-RP) with unraid/TruNAS setups. (video please, yes ill check his site on this stuff too)
        REPLY ON YOUTUBE

        Reply

      392. Enjoyed the video thanks 🙂 I ordered the DS1522+ recently (got it used for $550 from Amazon and will have in a few days). Also acquired 3 x 14TB Seagate Exos HDD for $115 a piece from Ebay — will get those about the same time. The Synology can do a lot of neat things and I think I’ll use it for a while and perhaps also setup an Unraid or Truenas. I used to have an unraid system about 10 years ago but sold it after using it for a year because I needed the money at the time. Nice to know unraid supports virtual machines, containers, zfs, etc. now. I’ll probably setup a TrueNAS Scale system next and then perhaps an Unraid as well, just to learn them all for fun.

        But looking at what all Synology can do so easily it’s giving me a lot of good feelings inside lol. Much like Novell Netware 3.11 did back in 1991 🙂

        Part of my challenge for setting up a Truenas or Unraid system is finding something that is power efficient and also works with ECC memory. I was considering the Dell Precision 7820 but I read it uses like 130 watts idle. Bleh.
        REPLY ON YOUTUBE

        Reply