World Backup Day 2023 – Sensible Storage Deals & Bargains

World Backup Day – Get Your Data in Order!

ALERTThis is your reminder that it is World Backup Day and you should have your backups in order! It may seem like a slightly contrived event, but the motivations behind World Backup Day are arguably more generally positive than alot of manufacturer celebration days. World Backup Day’s origins are more than a decade old and started over on Reddit when a user wrote about losing their data via a defunct HDD and wishing someone had reminded them about how important it is to backup data (though there is also debate that it was started around a Maxtor ‘Backup Month‘). The campaign started in 2011, and every year brands, tech professionals and industry bigwigs will push the subject of backups as hard as possible, as well as many popular tech news outlets writing articles SPECIFICALLY about the importance of backing up data – THAT is World Backup Day. The day when the tech industry makes as much noise as possible about people needing to have their data backed up sufficiently. You do not necessarily need to actually buy/do anything – you just need to make sure that your backup routines and 3-2-1 backup policies are all running fine. If not, well, it’s easier to remedy that in times of calm than in times of crisis! In recent times, big data services/platforms such as MEGA, Amazon, Backblaze and GoDaddy have sponsored the annual event in order to increase the awareness of both the Day itself and the necessity of checking your backup routines are in order!

So, if you are reading this and your backup routines and policies are in order – you can stop right here! You are ok, go and treat yourself to another coffee and biscuit. But if you are reading this and you have unique, irreplaceable and/or mission-critical data without a backup (or just in a single other location), then maybe use this reminder as time to start bolstering those backups. Remember, the cost of the backup hardware should NOT measure the cost of a backup – it should be measured against the cost if that data is LOST! The data, the long-term damage to your workflow/business, the time spent attempting recovery and the potential cost of data recovery services. However, we have to be realistic. In alot of cases, the reason for a person/business not having sufficient backups in place can often come down to budget/cost. The more data you have, the more it is going to cost to purchase another whole new storage system to effectively clone that same amount of data. So, me and Eddie on NASCompares have been searching the popular eShops around the world and searching for the best possible deals right now in the following categories; NAS, HDDs, USB Drives, SSDs and Thunderbolt RAID Storage. It comes as no surprise that many storage brands and popular eShops will use World Backup day to highlight offers on their products (end of tax year for many, stat of the next, etc), so there are quite a few bargains to be had! But where do we at NASComapres come into this? Sure we are doing this to provide fundraising for the site, but t clarify things:

  1. We will NOT recommend any deal that we would not personally buy or a Product that we would not use. We have reviewed hundreds of storage products and hope that validates our opinion on these recommendations. Additionally, DO NOT SPEND beyond your means! 2023 is tough enough as it is!
  2. Sometimes buying a whole new storage system won’t solve your backup needs. For some users, making small changes to your workflow/setup that introduce passive and low-cost backup options is a better and more affordable option. Message us with your setup and we can offer alternative suggestions. You can contact us directly HERE with your setup for free advice
  3. Yes, many of the Deals and Offers below are via affiliate links. This results in me and Eddie at NASCompares getting a small % as a referral fee. This does not undermine the fact that the deal is an actual bargain, does not cost you anything extra, and this small referral fee goes directly back into helping us carry on with everything we do here at NASCompares. Ultimately, this allows you to get a real bargain and also to passively support us at the same time.

So, let’s start going through the offers that are available on World Backup Day that might be the missing piece of the puzzle for your robust and/or immutable backup long term.

Note for much more general offers, head to this page HERE.

IMPORTANT – Adding Offers and Deals as they appear over the next 24 Hours

NAS Storage Deals and Special Offers this World Backup Day

If you have a significant amount of data, then more often than not a NAS system is probably the best option for your needs. A NAS can serve as a synchronized bare-metal backup to your existing cloud storage (or visa versa), as a means to backup multiple devices to a single device or even to backup another NAS device (i.e “Two is One and One is None” – The Power of Backups & Redundancy). Brands like Synology and QNAP will always make a noise on World Backup Day, reflected on both their social media and as seasonal offers of their products. Remember, ALL the NAS brands provide software internally to create the perfect scheduled and multi-tiered backup workflow (NAS-to-NAS/Cloud/USB backup routines). Here are the best deals we found on NAS devices right now:

Synology DS120J NAS + 4TB – Down to $169.98

Terramaster F5-422 10GbE NAS – Down to £441.99

Terramaster F2-422 10GbE NAS – Down to £271.99

Synology DS423+ NAS – Down to £441.85

WD My Cloud Expert Series – Down to £249

Synology DS220J NAS + 8TB – Down to $329.97

Synology DS923+ NAS – Down to £515.89

Synology DS923+ NAS – Down to £568.99

Recommended Articles & Videos


Hard Drive Deals and Special Offers this World Backup Day

Regardless of whether you are bolstering your existing Backup solution by increasing that RAID Storage Pool’s Capacity and/or Redundancy, or just building a brand new backup target – you are going to need storage media! Much like the NAS brands mentioned above, Seagate and Western Digital are among two of the very loudest voices during world backup day! Even if you look past the obvious motivation for sales (cough I am aware of the irony in this post!), there is no avoiding that these two brands are the biggest in storage and they will ALWAYS have great HDD offers during World Backup Day. Here are the best of them:

Seagate Ironwolf 8TB HDD – Down to £159.99

Seagate Ironwolf Pro 20TB HDD – Down to £359.99

Recommended Articles & Videos


USB Storage Deals and Special Offers this World Backup Day

Many people who fail to back up regularly (or at all), often use forgetfulness and absent-mindedness as the main excuse. “We do want to have regular backups, but we always forget to backup at the end of the day.” But you don’t need to remind yourself daily to perform a backup in order to get this backup done. There are several products and online services available that can automatically perform this daily backup for you. You can choose a local backup to an external hard drive, many of which will often arrive with software to have a daily backup performed automatically at a set time locally on your client OS. Also, ALL the NAS brands have multi tiers backup software in place that includes the option to backup towards a locally connected USB (bi-directional, multi-version, filter policies, schedule, etc). Lastly, many of them also include inclusive subscription cloud back-up services for X years, such as Amazon Drive, Google Drive, DropBox or others. Lastly, many external USB drives now arrive with Data Recovery services such as Seagate Rescue, Acronis or RecoverIT. Here are the best external USB drive deals we found so far:

WD My Passport 4TB – Down to £52.99

WD 16TB Elements – Down to £249.98

WD My Passport 2TB – Down to £34.99

WD My Passport 1TB – Down to £27.99

Recommended Articles & Videos


SSD Storage Deals and Special Offers this World Backup Day

One of the growing recurring counterarguments that people make about not having a sufficient backup routine/workflow in place is not even the cost, but the TIME it takes for them to be conducted and it’s impact on day-to-day operations on their hardware. It is a growing issue that the larger the amount of data you produce daily, the longer it is going to take to back it up to each backup tier. Time that might well take you/your hardware out of your workflow (or at the very least, decrease its abilities during busy periods). Thanks to improvements in interfaces in storage media from SATA to M.2 NVMe, as well as the growing affordability of SSDs – many creative professionals weigh up the costs of SSDs over HDD, weigh it up against the time they will save with substantially increased speed of backups, and decide it is totally worth it! So, for those users, here are the best SSD deals I could find during World Backup Day.

WD Black SN850X 2TB PCIe4 SSD +3yr Data Recovery – Down to £149.99

SAMSUNG 870 QVO 8TB SATA SSD – Down to £469.99

Recommended Articles & Videos


Thunderbolt Storage Deals and Special Offers this World Backup Day

Carrying on with Creative professionals, we can look at those who have big, BIG data to backup! Speak to any YouTube content creator, photo/video editor or indeed anyone who works in media and they will wax lyrical about the TBs of data that their current project takes up. Whether it’s HOT DATA (i.e the data that is being worked on), WARM DATA (data that is frequently in use all the time on all projects) or COLD DATA (the archive that needs to be kept for years), it all adds up! For these users, whose career and reputation lives and dies by their portfolio/catalogue data, that is when we need to talk about Thunderbolt RAID storage. Largely adopted as the ‘connection of choice in the creative community’, thunderbolt reaches thousands of MB/s of connectivity and is the go-to choice for those looking to backup their RAW/4K/Desnse multimedia projects. Here are the best deals I could see for Thunderbolt storage this World Backup Day (not a huge number of them, admittedly):

SanDisk TB3 Professional 2TB Rugged Drive – Down to £379.99

SanDisk 1TB Extreme Drive – Down to £98.99

Recommended Articles & Videos


📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       

      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      Leave a Reply to Sven LimaCancel reply

      337 thoughts on “World Backup Day 2023 – Sensible Storage Deals & Bargains

      1. I’ll put this out there for anyone to answer – I contacted MSI to ask them and the reply was basically “No Idea – let us know how you get on”. I have an MSI Tomahawk Max II Mobo, running a 5600X and 32GB DDR4 3200mhz. Because I have a 4x Nvme 2TB boot, I only have 4 SATA drives available (I don’t bother with a DVD). I have added a 7 port USB 3.2 card. So I’m running about 72-76TB of drives. I want to expand that a lot. The internals are only 500GB – I want to take them to 18TB. Will my chipset support that? Even MSI said “Meh – Dunno”. Has anyone here done it? Its a very expensive experiment if it fails….
        REPLY ON YOUTUBE

      2. too long, waste of time and doesn’t answer the question
        what is it better? 2 units of ssd 2T or 1 unit of SSD 4T?
        of course when it comes to performance
        and of course same brand and type, like sandisk ultra 3D
        REPLY ON YOUTUBE

      3. I realize that bigger ‘pro’ drive would be more reliable, NAS class/designed to be better, that’s why their also more expensive to the identical desktop version… BUT to make these lager capacity cheaper, one way *would* be to make them in desktop class and loose that extra reliability you only pay on ‘pro’

        Plus, to limit higher capacity to RED drives etc, manufactures get more money, and users don;t have a choice if its not there.
        REPLY ON YOUTUBE

      4. Per gig is cheap now-a-days. However, i don’t think i should admit i still use Barracuda desktop drives in my NAS…

        Their cheap, compared to RED drives and IronWolf.. Besides,from past experiences, they ‘whine’ allot in idle mode… Could of just been bad drive, but i doubt. These were 4TB drives

        Also, power-saving can make up the difference between buying big drives… The presumption your making is NAS’s are designed to be on all the time and active all the time, which is not always true. There is always going sections of ‘idle’, time, (particularly after midnight),. If you have Scheduled backups going on a QNAP, your gonna allow a few hour either way before the next starts to prevent possible increased failure. In that time space, the dives will spin down after 30 mins (usually) thus saving power. If you work that over a given year, that’s still a bit of energy saved right there.
        REPLY ON YOUTUBE

      5. When I first got a NAS for mass storage I got a 4 bay NAS and filled it with 4TB drives, it was nearly full after 4 years and I upgraded the drives inside it with 4 10TB drives.
        I back up the most important data off on the NAS over the movies.
        REPLY ON YOUTUBE

      6. Honestly I just have a bunch of 4tb red drives (every seagate I have ever bought failed within a year.. all of them..) My reasoning is its easier to replace a 4tb drive than an 18tb drive. Both in cost and in time. If I fail on a rebuild then I only loose 4tb of data. (I use unraid) I only backup what I can’t get back (pictures, home movies, etc. I can always re rip my dvds and such. 3-2-1 can get expensive otherwise. Especially with larger drives.

        The little nas boxes seem pretty neat but frankly an old pc with an hba card is all you need. Buy unraid once (or use truenas, openmediavault, linux, whatever you prefer) works. I prefer unraid because of the way it works. Even if you fail on a rebuild you only loose whats on the failed drive. With raid you loose the whole pool. With nas boxes your upgrade path is kinda expensive. With other options you can just use your old pc when you upgrade.

        My 2 cents worth. A lot of options. Depends on risk, time, and finances. Everyone’s mileage will vary.
        REPLY ON YOUTUBE

      7. I enjoyed this video very much! Very informative!!! What I would have like to see is a graph that shows where the flipping point is to decide on more or larger drives, including the NAS itself.
        REPLY ON YOUTUBE

      8. Well, if you follow technology you would know that ceramic glass memory has been proven to be a much smaller, cooler and vastly larger in size capability that the current SSD and HDDs. The Ceramic Memory Drives will be integrating over the next 5-10 years and the HDD will be as useless as the VHS and 8track tapes. So… no need to currently buy anything bigger than 200% of your needs, as you will be replacing them before you fill them.
        REPLY ON YOUTUBE

      9. you start with saying smaller drives are cheaper, and while they are cheaper as singles, if I were to buy a skyhawk 4tb its 21.5 per tb, a 20tb is 17.2 per tb.
        an exos is bigger disparity, in favor of larger drives.
        REPLY ON YOUTUBE

      10. Be aware that if you order a T500 from Crucial they struggle with stock and will mess you around massively on delivery times. I ordered 26th Dec 23 and have only just been told that my royal mail 24 delivery will be delivered around the 29th jan 24 ???? waste of space and never again Crucial. Maybe look at Samsung people.
        REPLY ON YOUTUBE

      11. The answer is simple: the best is to have lots of big drives!
        Crib the storage perspective, of course, not the noise/power consumption.
        Of course, with larger drives one should be very sure of the backups. And preferably use 2-disk redundancy to boot. It may be also result in higher ram usage.
        REPLY ON YOUTUBE

      12. Select drives based on workload and never mix workloads.

        If you’re recording surveillance 24/7 don’t mix that with other data. The surveillance activity is going to wear out drives faster. Putting other data into that mix is putting that data a risk.

        So you might need bigger drives for surveillance and maybe smaller drives for your other stuff. Create separate arrays to separate the workloads and buy drives that make sense for each workload.
        REPLY ON YOUTUBE

      13. You talk about the possible more possible points of failure.. but you miss the big point with Raid 5 vs Raid 1… raid 1, if one drive dies.. you take it out.. order a new one.. re-raid it when you get it.. with raid 5.. when one fails.. you have to get another drive and rebuild it.. b ut while that is going on.. the entire raid is OFFLINE.. so I normally recommend.. if you RAID 5.. order a spare to minimize the downtime…
        REPLY ON YOUTUBE

      14. Here is how I do it: get the price divided by total capacity to get $/TB. That is the true cost of your storage. Then you can compare apple to apple on all of your drive options and pick the cheapest one.

        Just note that there is a trade off. The more drives you have, the more power it is going to draw and the more points of failures there are in your system.
        REPLY ON YOUTUBE

      15. I wait for special CPU with lots of PCIe lanes and very little CPU power consumption. They would need a verys special design, so i guess i will have to wait forever before i can get a Raspberry Pie like system with 128 PCIe lanes (remember, they don’t need to be active all at once, but you can’t reconnect them dynamically as they are point to point, not a bus).
        REPLY ON YOUTUBE

      16. I feel like power consumption… isn’t a factor. You’re going to consume more power. You should expect that.

        Also noise… isn’t a factor. HDDs make noise. If you don’t want noise, don’t get HDDs.

        Here are my take-aways:

        1. Don’t just get 2 drives. Because you’ll end up using one for parity only and waste the space you could use.

        2. Get 4-5 smaller drives at once so you can benefit from the performance boost. This also ensures you can have more useable space over all.

        Unless you have the cash to fill out 4-5 18TB drives in your NAS, just get smaller drives. Then you can have better performance and more redundancy.

        If you didn’t want high power consumption and lots of noise, you shouldn’t be buying a NAS and filling it full of HDDs.
        REPLY ON YOUTUBE

      17. 1:30 Your right a RAID is not a backup, but due to the functionality of how it’s implemented (ie. a nAS vs two external drives in sync), we call them different names, but the results are the same.

        eg.. If you have 2x RAID 1 Hard drives, and one fails, the other still has your data..
        If you have two external drives in sync (weather that be via software, or manually kept up to date),, if one of your external drives die, you STILL have your data safe on the other.

        So, the way we think of a RAID vs backup depends on the environment itself, but they both keep our data safe if one drive dies.. ie they both serve the same purpose. For eg.. I don’t do raid, because I don’t want to loose storage capacity but I do have external drives synced.. so to me, that is just as good.
        REPLY ON YOUTUBE

      18. You know what, I have been researching to having a solution for iCloud and Google One Drive because I am really struggling saving my image RAW files and videos. Then all on a sudden a photographer Tony Northrup brought the light of a NAS! I did not know what NAS is until couple of weeks ago! Then I started to do my own research and found you. I know you dont have smooth voice and attraction catching vocal gestures, but I find myself in you, I would want to express my research so that people can decide what’s best for them. I have found the same agony in you. You are like a tech big brother who wants to advice whats best for us instead biased brand marketing. I like your videos. Just wanted to pay my gratitude because I know, a small wish can boost up the moral energy a lot cause you have done so much research, night and day sleepless time. I know for the video but I know it’s for the people whom you want to help so desperately. Thank you so so much.
        REPLY ON YOUTUBE

      19. Regarding sata ssd’s, would there be any benefit to having a Sata III M.2 ssd connected through an adapter to the PCIE Gen 3 slot on the motherboard instead of having a Sata III ssd connected through the regular sata port/connector? Would the PCIE connection offer any less latency than the sata port connect? There seem to be hundreds of videos on youtube and thousands of articles on the internet about Sata SSD’s but I have not come across any addressing this question, not in the slightest. I am asking because I am considering options on an old computer also because this channel is viewed by a lot of very knowledgeable viewers not to mention the owner. Any suggestions? Please help. Thank you.
        REPLY ON YOUTUBE

      20. I have 2 mvme drives (samsung 970 evo) as read-only cache installed in my Qnap nas.
        One drive reported as failed and not working anymore.
        Now i want to use the good drive for something else in a Windows pc.
        I can not format both drives.
        In Windows-drive-management i can see 6 partitions and some unalocated space.
        I can remove all partitions so i have all space available. Then i can create a new simple volume.
        The drive will be formated automaticaly as NTFS.
        HOWEVER !!!! when ejecting the drive and plugging the drive in again all partitions are still present like nothing has been done.
        I did try this on both the good drive and the bad-reported drive but still all 6 partions still are there.

        Question: How can i format a cache-drive (mvme m2) from a Qnap-nas to a regular NTFS storage drive for Windows(10)?

        Thank you
        REPLY ON YOUTUBE

      21. Hi
        I want to buy a fast and longevity SSD so I saw on YouTube and some people say that NVMe is “short life” and sometimes “crash” your desktop. I am doubt , I don’t know what type of SSD to buy , i want only fast and longevity, I don’t care about prize ,i care only two things: lifespan, longevity and very fast .
        Thank you
        REPLY ON YOUTUBE

      22. hdd hum is something that drives me mad, I can stand the ticking etc but the hum goes right through me and i can hear it from one end of the house to the other.
        So for now I’m just doing manual backups and using local storage, no networking.( I really dont trust networking much when it comes to viruses etc ).
        REPLY ON YOUTUBE

      23. I went with a samsung 970 plus with dram 1tb for a little less than I could have a got a cheaper 2tb ssd for my laptop, I didnt really need 2tb but the longevity and better performance was what counted.
        No regrets , my laptop is now very responsive.
        I am considering getting a bigger drive for an external nvme enclosure ( I used my old 1tb drive in that for now as it still worked ok for that but was playing up in laptop ), I will probably just go for a cheap one there as I wont really use it that much.
        REPLY ON YOUTUBE

      24. excellent video!! you’ve got yourself a new sub. perfectly explained (at least for me). i came with no knowledge of nvme and now i have a pretty good insight of what to buy. thanks a lot. i will look for more in your channel.
        REPLY ON YOUTUBE

      25. Hello, i tried installing an NVME M.2 PCIE 4gen ssd of 4 to on my MSI motherboard and it didn’t work out, my bios don’t even open and my monitor show black screen when powering my pc on. Can you please help me with this ? thank you!
        REPLY ON YOUTUBE

      26. Cheaper more drives but what about power consumption? More watts consumed or is the same? Let’s say will last 6 years and had to pay more electricity ⚡️ during those 6 years that also impact
        REPLY ON YOUTUBE

      27. Would it be a good idea to have the redundancy drive twice as big as the primary drive so that when the primary drive fills up, the redundancy drive can become the primary drive and then get another redundancy drive twice as big as the new primarry drive and the original primary drive can be put in another location for storage?
        REPLY ON YOUTUBE

      28. Having not watched the video… both have their benefits and drawbacks.

        Benefits:
        More means higher throughput can be achieved and higher levels of redundancy can be gained making the setup more resilient when it comes to disk failure.
        Bigger means less power draw, less vibrations and less potential heat, less physical space used and more capacity.

        Drawbacks:
        More disks is more power draw, more vibrations more heat production and more physical space used. With the added redundancy comes less capacity as the redundancy means disks are there just to cover the situation where one or potentially more disks fail protecting you from data loss in those cases.
        Bigger disks means less options for redundancy as you have less individual disks, less theoretical throughput and often higher cost because even though the cost per GB drops the amount of GB’s per disk is significantly higher.

        In the end it does not matter much which one you pick as long as you first take some time and think about what your goal is with the setup maximum redundancy and not to concerned about max capacity well more disks is better. Maximum capacity and not to concerned about the data’s longevity less big disks is the best option. If your chosen NAS enclosure allows for more disks than you are currently using then less but bigger might also be a good option as it will allow you to grow the storage capacity over time.
        REPLY ON YOUTUBE

      29. OK Typed up a long post and then lost it all… So here is a short version.

        Check the manufacturers HCL (hardware compatibility list) before buying drives. And if you don’t find a drive of the capacity you want then consider if it’s worth the risk. RAID controllers can be real finicky about drives.

        You may feel SATA and SAS is mature tech and there should be no compatibility problems, but there are and there will be more. I’ve worked with (from memory) Adaptec, Areca, Raidcore, 3Ware and LSI. Sometimes the compatibility problems are blatantly obvious, but sometimes they are a creeping problem that takes time to develop, and they don’t get better with time. Sometimes a firmware upgrade of the drives or the controller can help, but there’s no guarantee that either is coming if you start out with incompatible hardware.

        Also stress test the arrays before your start using them. Run every storage test you can think of on them, and then try some more. Check the RAID logs and take note of any warnings. You don’t want warnings! Not even the non critical kind. Make sure there’s as little vibrations as possible. Vibrations can play havoc with RAID arrays even if they are not strong enough to cause a head crash.

        Also don’t use Shingled magnetic hard drives. They are a pain when used for RAID.

        Temperature! A interesting paper published by a storage company probably a decade ago showed that the ideal running temp for HDD’s seems to be between 35 and 45 °C. Higher or lower temperatures showed increased failure rate. But don’t take this as gospel. However we do know that high temperatures are bad in general, and 40°C is a quite easy target for HDD’s.
        REPLY ON YOUTUBE

      30. I don’t have that much data, so I end up just refreshing 2.5″ hdd every few years, and use the surviving older one as redundancy backup. as time goes on, newer drive will be cheaper with more tb, so if I don’t need those 16tb at once right now, I can just buy 4, 5, 5, 6 over the years whenever I need one. Currently have 500gb, 750gb, 1tb (dead), 2tb, 4tb, 4tb, 5tb, 1tb sata ssd, 2tb nvme

        Sure multiple points of failure, but at the same time it’s not all eggs in one basket. I did once have 1tb hdd when it was huge in 2009, backup all my files, then trip on the power cable, making the drive dead, with all the 1tb data I just sorted. So nowI list down list of file I have in an excel sheet in gdrive. so if one broke down, I know exactly what data it stored. Especially if I have 1 hdd for 1 tipe of stuff. that one is for x, this one for y, this one for z. so I won’t need to find z in x.

        Personal use 20tb should be more than suffice. which is probably 4x5tb or 5×4 tb. 450-500 usd probably. All my photos from 2010 is only around 400gb jpg. and since current hdds are 4-5tb or so, yea I can manage to save more copies in more drives.
        REPLY ON YOUTUBE

      31. If you have seriously important data don’t use a NAS use a SAN, lots of drives only generally gives a performance increase only for reading not writing, RAID on NAS devices usually has some restrictions based on implementation of the standards of the supplier vs on board raid provided by server manufacturers. NAS providers are great at vendor lock-in. Also make sure you buy drives compatible with the NAS as they don’t cover warranty issues otherwise. Generally pro series drives offer 5year warranty non pro are 2-3 years
        REPLY ON YOUTUBE

      32. huge enterprise drives can go 300mb/s sequential while a 4 or 6tb drive usually cant even hit 200mb/s especially if they’re 5400rpm so fewer disks can be as fast depending on the size difference. Also, the power use is substantial when using more disks. disk power usage can be more than the rest of the entire system combined when talking about 10+ disks
        REPLY ON YOUTUBE

      33. More mechanical parts are wearing down using smaller drives vs few less drives same as a car with three small gas engines vs one larger most likely one of three water pumps will fail before warranty
        REPLY ON YOUTUBE

      34. clip starts after 1 minute intro. In 1 minute I explain the easy facts 😉
        More drives: good for raid level 5 or higher. Where raid5 needs at least 3 disks. In case you need a specific raid level, you need the least amount of disks.
        More drives: eventually more cache if you use drive cache. Depends on drives.
        More drives: more performance if your controller is still not on its limit.
        More drives: can increase performance, if the blocks you need are on different drives.
        More TB: less power consumption compared to the same storage with more drives.
        More TB: higher density = faster access (compared 1 disk with 1 disk, not the raid in summary)
        More TB: overall costs could decrease (smaller NAS, maybe more TB per $$)
        REPLY ON YOUTUBE

      35. So here we are, almost 2 years later(after this vid got released that is).
        NAND and SSDs/NVMe’s have never been cheaper and faster.

        Samsungs 990Pro (utilizing the fresh NVMe 2.0 protocol) has set new standards as the fastest Gen4 NVMe drive, with the highest consistency and loadbearing,
        which makes it perfect for System, Program, Swapfile and heavy workload drives.
        Also it is massivly used in that Chia harddrive usage crypto stuff, where it gets hammered and keeps proving itself.

        Thats why, also coz data got to big and i ran out of space, ive replaced my 500gig 970Pro with a 2TB 990Pro and its a breeze to work with it, no matter what you throw at it.

        For more affordable 4TB drives for gaming and/or content creation, that still deliver good performance and dont cheap out on the quality and longevity, ive opted for the Lexar NM790.
        This is a beast for about 200bucks, that has no DRAM, but uses SLC caching alongside HMB,
        while maintaining really good speeds and IOPS (1million IOPS read and 900k write or 7.4GB/s and 6.5GB/s respectivly),
        rivaling and sometimes even beating the 980Pro for example and with a whopping 3 *PBW* and 5years Warranty its nothing to scoff at.
        (HMB = Host Memory Buffer, using part of your System memory, to speed things up and hold them more consistent, which means with my 32gigs of DDR4 3600CL16 RAM ive no problem with that.)

        I might have preferred the WD Black SN850X 4TB for gaming, but its atleast a hundred bucks more expensive than the Lexar NM790,
        which also beats the SN770 (and all the other cheap options, like the NV2 or P5plus) that on top of that only comes with 2TB max, so that wasnt an Option.
        As nothing, not even the 990pro beats the SN850X in gaming related workloads, while the 990pro beats em all and even the SN850X in every other field.

        And tbh: For other than in Enterprise, Gen.5 is a hot Joke, barely faster than a good Gen4, but hotter and pretty much twice as expensive, with for most *NO* advantage to speak of.
        REPLY ON YOUTUBE

      36. I use 8 x 8tb as standard in my 8 bay nas’s, JBOD. Reason is, I use a 2nd and 3rd nas as backups, and if a drive fails I just copy the data onto its replacement, that way I just keep 1 nas running, otherwise 2 would be on all the time, I do a backup using goodsync once or twice a month, I tried synolgys drive sync, too automatic. I like the control of goodsync.
        REPLY ON YOUTUBE

      37. Very short version… go for more drives. More smaller drives usually work faster AND they make less noise. My advise would be never to buy drive bigger than 8TB, larger drives come with a big drawback of noise. Also using more smaller drives and a drive failes its cheaper to replace and faster to rebuild.
        REPLY ON YOUTUBE

      38. To what extent can you mix and match drives in something like a Synology, QNAP or Asustor system? I have only WD Reds because my original NAS was a WD. I was wondering whether I can use Seagates if one fails. I was also wondering a switch to a bigger drive would work. Say I have four 8TB drives and I replace one with a 12 or a 14. Does that work? What impact is it likely to have on performance?
        REPLY ON YOUTUBE

      39. I had a slightly different experience from what is expressed here, though I’m not casting any doubt on the validity of the information. I have a Nimbustor 4, populated with 4x8TB, for 24TB of storage.

        I went for 8TB because, at the time, it represented the best bang-for-buck and gave me a total capacity (24TB in RAID 5) that I was unlikely to exceed for quite a while.

        The NAS itself represented the best box I could justify. Being four bay, it also gave me the opportunity to spread my expenses over a longer period.

        When I originally set it up, it had two drives in it. It was kind of noisy but no more than I expected. When I added a third drive, the noise and amount of disc access was much greater than it had been.

        Recently I upgraded to 8GB of RAM and added a fourth drive. The first thing I noticed was that the overall noise is far less than it was with three drives and almost certainly lower than it was with two drives. In fact, it’s got to the point where I rarely hear it.

        This probably won’t be most people’s experience but it seems to me that either by luck or design, I ended up in a sweet spot. I can’t explain it but I can hazard a guess that this is the kind of setup the designers envisioned…?
        REPLY ON YOUTUBE

      40. if my current motherboard has m.2 that can handle gen 3×4, and i buy gen 4×4 card, it will be limited in speed but when and if i get a new motherboard that can use gen 4×4 m.2’s than i can just move that card onto new motherboard right?
        REPLY ON YOUTUBE

      41. A bit hard to follow, but still good to know. What I’m really trying to determine is what to look for when searching to purchase an NVME SSD that is compatible with my synology 918+; ( are they all approved by Synology?) And will I see ant performance difference if using it in a home environment. (Basically is it worth even purchasing and installing) Can these SSD’s be swapped out into a new NAS if and when my old one becomes obsolete?
        REPLY ON YOUTUBE

      42. I have thumbed over about a hundred offerings on the Tube, knowing that all of them are gonna strech this old boomers brain completely out of proportion. (I do know that performance means heat. lol ).
        It was providence that made this the first one I’ve watched.
        It will give me a more clear understanding of these storages and speeds.
        This was so informative and concise that I no longer fear or dread delving into more.
        particularly vis a vis matching the device to my needs.
        Seems for me, less is gonna be more.
        Subbed immediately.
        REPLY ON YOUTUBE

      43. Your walkthrough videos are incredible provide a plethora of valuable info. It would be super helpful if you could timestamp sections. Understably it’s tricky as many of you video are long form.
        REPLY ON YOUTUBE

      44. I dont think we should only look at size vs number but also failure rate. I would rather go with a disk that doesn’t fail on me that often then the one i need to buy a new disk every few years and rebuild the RAID.
        REPLY ON YOUTUBE

      45. If you have two large capacity drives and one of them fails…that’s a HUGE SLOG to replace in one hit. If you have lots of small drives and one fails it’s not going to hit you as hard when you suddenly have to get the replacement.
        REPLY ON YOUTUBE

      46. currently my Media collection is currently under 3TB so I do not need a very big set up yet. Currently using 3 2TB reds in a raid 5. About to upgrade to 3 3TB drives in a raid 5 Then have a single 10TB HDD as a Back up.
        REPLY ON YOUTUBE

      47. not me doing a bit of research before buying an NVME ssd to upgrade ma boot drive… the motherboard website says PCie Gen3 is supported so One got just that, after over 16hrs of back and forth One finally saw that there is a current BIOS update out but its a beta so its a no go
        REPLY ON YOUTUBE

      48. I just built my own NAS after going through a 2-bay NAS and then added a 4-bay NAS. I built one with 18 HDs and it is much more expandable. I am using UNRAID and it has been great so far. It is much faster and I have so much more capacity. When I need more, I will replace some of my 6 TB drives for 12 TB drives.
        REPLY ON YOUTUBE

      49. one point , is when one of your drives will die , is easer and faster to recover one 4tb drive than a 12tb drive , and you don t lose all your data just lose a part of your data , and you can come up much easer with 70 euro than 300 when you get a surpize dive falure ,
        REPLY ON YOUTUBE

      50. Or, Dell T630 LFF server £350.
        Used 2GB cache RAID controller £110
        6x used 8TB HC520 drives, £70 each.

        Needed a server as well as a lot of storage, so leaving out CPU & SSD upgrades.
        REPLY ON YOUTUBE

      51. As an Arch Linux user, I was torn between buying an expensive (new) tiny RAID machine with 4 x new HDD’s or using an old (but free) monstrous 12 bay Supermicro server with 12 (free) smaller HDD’s.

        Decided to go the Supermicro route. Have to admit, I’m way in above my head on this and have been dragging my feet for nearly two years now. In the end, I’ve decided that any form of RAID like setup is not for me. Don’t want to pay electricity (UK prices) on a server running 24/7. The beast can sit in the corner and be booted up once a week, whereupon I’ll do identical rsync (ext4) backups to two of the four nodes. Then following month do the same to the other two nodes. If I have a week when something of critical importance is created, I’ll rsync immediately. Also like the idea of each backup being completely isolated from the others.

        I know my PC HDD will one day fail. However, given a choice between losing a few days of data or paying 24/7 electricity for RAID… I’m prepared to accept the former.

        Thing is, I’ve never heard of anyone doing this with a four node machine, so maybe there’s a good reason not to. I like the idea of the sever being extremely heavy, as it’s less likely a drug addled thief would be able to move it, or even realize the drive bays are removable. Always thought those tiny RAID machines were too easy to tuck under your arm and walk away with. In fact, I might even bolt the thing down, as right now it sits on a table.

        Could’ve gone with 4 x HDD’s and backing up via USB. However, that’s back to the hassle of pulling them out from a hiding place and connecting all those wires up. Plus, I’d need to buy large expensive HDD’s. Yep, I just like having four sets of backups.

        Yes, fire/flood is a possibility, but still have a cloud backup for all essential documents. Like I said, I ain’t no expert or computer geek. Maybe it’s a daft thing to even consider doing…
        REPLY ON YOUTUBE

      52. In 2004 I had 9 Seagate hard drives fail in a 2 week period and they were sequential serial numbers. When I contacted them about a possible issue with that batch they spewed out the corporate boiler plate response saying that wasn’t the case and that their hard drives were of very high quality blah blah blah. I asked for new replacements rather than refurbished ones but they wouldn’t do that either. I’ve never sold another Seagate drive since. I doubt the few thousand drives I’ve sold over the years that weren’t Seagate are missed by them but I also never recommend Seagate because of their piss poor customer service.
        REPLY ON YOUTUBE

      53. The time to rebuild an array with 1 of several smaller failed drives verses the time it takes to rebuild an array with 1 of two large drives is important to me as a home user.
        REPLY ON YOUTUBE

      54. I’ve had 7X 4TB Hitachi Ultrastar drives for my NAS since 2015, and still haven’t had one go bad on me. I’ve run it in both a RAID 6 and RAID 10 with a hot spare, and in both hardware and software (WSS) RAID modes, and recently bought another drive to make it 8 and did away with the hot spare, making it the storage for my backups. Still pretty reliable, but I wanted to replace it with SSDs. I’m a believer in minimum 6 drive arrays for NAS, for both performance and redundancy.
        REPLY ON YOUTUBE

      55. I built two TrueNAS (was FreeNAS) using six 4TB drives each (4+2 ZFS2), back in the days.
        I’ve been considering upgrading to six 8TB drives (4+2), but have also been thinking about four 16TB drives (2+2) instead.
        Both get me about the same usable space (~32TB). Note less than 2 parity drives is NOT an option.
        I’ve been thinking about it for a long time, but haven’t reached a conclusion. It’s a tough choice.
        REPLY ON YOUTUBE

      56. IF I “HAVE TO” BUY A BRANDED NAS BOX, I’d spend my money on the biggest NAS with the max # of BAYS possible. Cuz you can always buy cheap smaller drives at first, but if you get a small NAS and used up all your bays from the begining it won’t grow more bays in the future and expanding more capacity means you have to discard your smaller drives, and that is a drive doing nothing loosing it’s value as redundancy.

        The question of more hdd or Bigger hdd its a wrong question. Why? because the purpose of a hdd is to hold data. So data security always comes first.
        Product like 2 bays NAS are pointless, you can achieve that with any old computer or laptop laying around your house, hook it up to you network and you have a raid 1 (minimum) NAS, the rest is just SOFTWARE, heck if you like Synology that much you can use XPenology which is a hacked version DSM 6.2 and the new DSM 7.0 that can be installed in any computer. And if you think well my old computer consume a lot of WATT to be an Always on NAS, then find out the socket of your motherboard and buy the most efficient CPU on ebay. Like, I have an old i7 90W cpu, then get an i5 35W chip for $20 and it will be almost as fast as the fastest Synology box.

        Then what is the appropiate rule to build a NAS. It’s pretty simple actually… you build it with the capacity you’ll need. A good rule of thumb is aggregate all your current storage cap in your house and multiply by 2 (chances are it took you years to fill them up). Most people without NAS, they won’t reach 14TB.
        And this is how data centers are built, they buy by capacity and not expandability.
        Second thing you’ll need to do is calculate how many disk you are willing to distribuite those “14TB”, always remember the more the better, cuz you will have more redundancy.
        In my case I would go for used SAS drives on ebay, for one they are all 100% enterprise drives, and are 1/2 the price of SATA drives with the same Capacity, but that also means you need to build your NAS with a SAS backplane and a SAS HBA in mind. ie I bought 3 Dells R730 XD with 24 2.5″ bays, 24 cores, 256Gb ram ECC and it includes 24x 2.5″ inch 600GB 10k rpm sas drives. For only $900 ea. I bet you can get waaaay lower price if you go for r620
        Now you can also get a r730 same specs but with 12x 3.5″ bays, there is one that comes with 12x 3TBs SAS drives a total of 36TB for $1400. Synology 12 bays costs $3000 and it doesn’t come with disks. Booooo
        If you go to ebay, you can see SAS 3TB goes for as low as $15 ea and buy in bulk I found a 5x 3TB for $30 total LOL. Oh! and it’s free return, couple years more 6TB will be at the same price point.
        And almost forgot, you can switch to SATA drive when you like. Cuz SAS hba with SAS backplane can take SAS drives AND Sata drives. Unlike most Synology NAS only accept SATA drives.

        Of course power consumption is a problem but it’s like $25/mo I would gladly pay (cancelled Netflix and Disney Plus LoL), cuz you are dealing with a real server not only you learn new skills, and all the parts are super cheap. And you can always expand your server capabilities. Synology is moving to 2.5Gb and 10Gb as PREMIUM stuff… heck I’ve been running 10Gb like a decade ago. I moved to 100Gbps, not long ago, that’s 10GB/s!!! The cards costs like $150 ea and the switch costs around $600 for 32x ports of 100Gps, yes 32 ports. I moved all my nvme to boost the server storage, and all my terminals are all diskless because booting from network is almost as fast as having a local Gen3 nvme, and not to mention all the VMs and Dockers you can run.
        REPLY ON YOUTUBE

      57. What’s the best HardDrive for HomeUsers (for Data, Video, and Surveilance)? …maby a Seagate Exos x16 (with 14TB) in a QNAP Turbo Station TS-464 8GB …….what do you think?
        REPLY ON YOUTUBE

      58. i installed nvme cache so I could get higher performance on small files being transferred, it doesn’t do shit and these guides are all bullcrap. small files still running at 9MB/sec, large files 100MB/sec
        REPLY ON YOUTUBE

      59. Noise is really a bummer for me now. I went from 4x3TB red to 3x8TB iron wolf, and the noise is more than double, and far more annoying in character. Heat and power also way higher. For next upgrade I want 14TB plus disks, and they are all horribly loud. I want high capacity, but low noise, low speed, low energy, since I can have multi TB of NVMe cache.
        REPLY ON YOUTUBE

      60. Hello, thanks to you I was able to grab a Synology 220j VERY cheaply, Question could you do a video concerning hyper backup from Synology to remote Synology (NON TECH). Thanks for this video
        REPLY ON YOUTUBE

      61. Incredible video. I learned so much today. It would be good you could make a video explaining why nmve drives are not detected in some motherboards. Many motherboards provide up to 3 Nvme M2 onboard slots but you can’t populate them all because some PCIe slots get disabled on the motherboards and if there is a PCIe cards in those slots it prevents your nvme M2 drive from being detected. I watched many videos on this subject but there isn’t one that provide a rue of thumb on how to get to use all your Nvme M2 slots due to channels sharing and other. I suppose that every motherboard is unique and probably hard to provide a generic explanation. Thank you.
        REPLY ON YOUTUBE

      62. Very informative videos. You give info that is very relevant without beating around the bush. You make a good point about balancing out between the cost of NAS system and the actual storage. One option for anyone starting out could be to go for a smaller storage and then buy more/bigger HDD as the data grows and HDDs become more affordable in future, while investing in a NAS with more bays for future-proofing if really necessary. That also means hopefully sticking with the NAS with more bays for a longer time, given the initial cost.
        REPLY ON YOUTUBE

      63. 3 minutes in and i have already noted 2 incorrect bits of information. Sata is not as old as hard drives, not even remotely close. and PCIe is not as old as you imply even if saying decades is not technically incorrect both started development in the early 2000’s and came out in the mid-2000s My first several PCs had neither. My high school PCs I built had PCI for expansion cards and AGP for video cards and IDE dives. In fact, they both came out within a couple years of the first 64 bit CPU.
        REPLY ON YOUTUBE

      64. Thanks mate for the great info. I have a 5 yr. old TS-653A with 5 WD60EFRX and I’m stuck with 1gbps connectivity. I’d like to get at least 2.5gbps upgrade so I’m going to get another NAS with faster networking and use it as a staging NAS. I’ll add a 6th drive to my 653A and move it to my in-laws house and work out syncing between the 2 NAS.
        REPLY ON YOUTUBE

      65. I think the mistake people make with NAS and especially raid5/6 is they think its a backup and its not. Any important data still needs a backup, RAID5/6 yes can increase read/write speeds but its really about redundancy (meaning uptime), businesses need to maintain uptime but not home PC users unless Home users are hosting web, file, plex servers for others offsite to access.
        REPLY ON YOUTUBE

      66. I use an old 4 bay QNAP 421 Turbo NAS with 4x3TB WD Red drives bought in 2016. It was set up in RAID5 and worked flawlessly……until they didn’t.
        Drive 1 failed yesterday, then Drive 3 failed today during the rebuild. Fortunately my data was syncd to a USB WD Elements enclosure. I’m now going with 2 x RAID 1 Volumes instead of RAID 5.
        REPLY ON YOUTUBE

      67. I have adopted this rule now; Any HDD capacity less than 1.5x what you can get for $200 on the SSD side, is to be considered obsolete.

        Currently you can get 4TB SSDs for just north of $200, that means 6TB (1.5 x 4) drives are now the smallest HDD that is worth getting. 6TB HDDs are now $90, while 4TB HDDs are $60. Up to each and everyone to put their cutoffs though!
        REPLY ON YOUTUBE

      68. Still not clear which is best ????????, so I bought a QNAP TS-1232PXU-RP-4G 12bay ($1475) and put in 12 x 20TB drives (Ironwolf Pro $329 each). After RAID 6 have 185TB available ????????2 x 10gbe, 2 x 2.5gbe network connection. Bought 13 drives to have a spare. Total cost before tax: $5752.
        REPLY ON YOUTUBE

      69. Awesome content. I’m looking to upgrade my 240GB NVMe SSD to a 2 or 4TB version. The system it’s going in is a Dell Precision 7510 laptop, I wonder if there’s enough space to fit one with a heatsink though?!
        REPLY ON YOUTUBE

      70. I don’t buy Seagate – ever – crooks they are, different drives sold with the same SKU – some are from a modern Thailand factory, others are pieces of shit from an ancient Chinese plant…

        Hitachi, Kioxia are decent companies, making excellent products

        WD, well, Seagate bought them out – your mileage may vary, depending whatever they actually bother to ship you…
        REPLY ON YOUTUBE

      71. 16, 18, 20, 22TB>>>>Talk about putting your eggs in 1 basket!!!
        Sad this guy doesn’t even talk about the difference from smaller drives vs larger drives platter technology and the difference in drive life expectancy and likelihood of drive crash.
        REPLY ON YOUTUBE

      72. Smaller. Failed 2TB drive can take days to get the data back. Imagine the damage if you have to deal with big 12TB drive that failed. Don’t keep all your eggs in one basket. But if you can – get more and bigger drives. Spread the information around.
        REPLY ON YOUTUBE

      73. Surprisingly I never heard of world backup day. I guess I need to start taking action today! This was extremely informative! I am OCD about backup cuz I have overwritten videos I recorded in the past thinking I wouldn’t need them anymore and didn’t think twice about backup. Oh how I can kick myself for that! That’s why storage is one of my favorite technology subjects cuz I always want to learn more about it, hence why I subscribed to your Channel! Keep up the amazing work you do!????????
        REPLY ON YOUTUBE

      74. I picked up the Synology DS923+ today (well, at 12:10am pacific daylight time) when Amazon and B&H Photo both dropped the price so it was only $9 US more than the DS423+ (on B&H) or the DS420+ (on Amazon). Both also have the Seagate IronWolf drives on sale. I had to sit down and really look at my video collection to see if transcoding was an issue, and in reality I only have 4 videos in H.265, so I’ll just redo them in H.264 and the problem goes away.

        I will point out, on B&H, don’t buy the “backup day” sales package of the DS923+ with 4, 4tb seagate drives. Buy them separately to get the Hot Zone Flash deal on the DS923+.
        REPLY ON YOUTUBE

      75. Although I know a bit about IT and computing, the idea of a NAS as a Back up was well explained indeed here and has made a lot of sense to me. Thank You Very Much.
        REPLY ON YOUTUBE

      76. Something worth mentioning; When your RAID drive fails and you want to replace it with a new one, it’s important to keep in mind that during the replication process, all data from the entire drive will be read. This means that if there’s a fault anywhere on the drive, it may cause errors and failures during the replication process. Additionally, the replication process can put a heavy load on the drive, which may lead to a high risk of further failure and cause a catastrophic outcome.
        REPLY ON YOUTUBE

      77. 13:06 I’ve almost 2 dozen WD Elements drives. Cheapest offline storage/backup that I’ve found. Amazon(US) sold the 14TB for $200 this time last year. Best $/TB I’ve ever seen on them. Last month third party sellers on Newegg were around $205 for the 14TB, but they were all new sellers and I didn’t trust them. B&H and Adorama were selling the 14TB for $220 at the same time. Hopefully deals like these will be announced today. Big thank you to NASCompares for their video on USB Copy. Very helpful in learning how to backup directly to external drives. https://youtu.be/Gf23iNcg2KY
        REPLY ON YOUTUBE

      78. 13:06 I’ve almost 2 dozen WD Elements. Cheapest offline storage/backup that I’ve found. Amazon sold the 14TB for $200USD this time last year. Best $/TB I’ve ever seen on them. Last month third party sellers on Newegg were around $205 for the 14TB, but they were all new sellers and I didn’t trust them. B&H and Adorama were selling the 14TB for $220 at the same time. Biggest down side of these is speed. I started backing up my DS920+ last night. It has 39TB of data. Backup will take 3 full days.
        REPLY ON YOUTUBE

      79. Do you rekn there’s going to be more than 5TB capacity portable consumer USB HDDs in the future? or are USB type C SSDs going to take over from them for 6+ TB capacity’s?. A long wait for them to be affordable????
        REPLY ON YOUTUBE

      80. DANG, Glad you mentioned this, just found that my HSB3 sync (OneDrive) just deleted every thing earlier than 28th March 2023 and any thing new would continue to syncronise,
        Data was still in the cloud, just not in the QNAP.
        Wish there was a feature to test that the two are 100% identical. [TEST LOCAL vs REMOTE]. Button.
        And report inconsistances.
        Thanks for sharing. Keep up the searching. Nice work.
        REPLY ON YOUTUBE

      81. A year later and it’s not really true that gen 3 immediately bottlenecks a gen 4 drive. There’s cheaper gen 4 drives slower than fast gen 3 ones and anything requiring decompression like game data struggles to use more than 2xSATA bandwidth, even with Direct I/O. So fast gen 4 hasn’t delivered in practice. Mostly gen 4 has only real noticeable performance gains in niche usage.
        NVME M2 have thermal dissipating stickers, NAND likes some heat, it’s the controller that needs to cool. The high performance drives tend to have heatsinks, but a lower performance drive is often very power efficient and there’s no need for one the thermal sticker spreads sufficiently. That said an NVME under a GPU might benefit from the heat shield of a spreader, but the topic is debatable and testing is preferable to hand waving.
        In a well ventilated ATX case I have not seen any NVME heating issue, just slightly warmer than a mostly idle SATA 2.5″ SSD.
        Are many users self inflicting heat problems, using performance mode on CPU, turning all power saving off and aesthetic cases with bad thermals? OEM systems are notorious for heat, as are the high end Intel CPUs.
        Because the performance drives I have used have adequate heat sink included. It’s easy with a GPU to heat a case up above 50C and then suffer stutters due to bad configuration. I make sure to mix in fresh cool air with GPU exhaust AND have intake and exhaust fan responding to CPU & GPU sensor via open source package FanControl, that lets you recognise a system under load needs to push air.
        REPLY ON YOUTUBE

      82. A good trick if your PC has a PCIE 3.0 NVMe connector, is to put a PCIe 4.0 NVMe in it. Those drives are designed to run at the faster speeds so when you run them at the slower PCIe 3.0 speed, they don’t overheat. And the PCIe 4.0 drives have dropped so much in price that they are close to the same price as the 3.0 versions.
        REPLY ON YOUTUBE

      83. This is EXACTLY what i was looking for – thank you for explaining TBW and TLC QLC etc – this really explains everything the lay person should consider when buying an NVMe SSD
        REPLY ON YOUTUBE

      84. he speed difference between more drives or not is one I have debater. I have an 1819+ and a newer 920+. The 920 CPU is about 50% faster, but the 1819+ had 6x HDDs, and i used the other 2 bays to run normal SATA SSDs as a RAID 0 cache, since the add on card for the 1819+ is really pricey for what it is. I ran PLEX on both and initially it felt like the 920+ was slower and stuttered more with larger files, however now there doesnt seem to be much of a difference. Hardly a scientific test but this is an interesting question. Not sure how to test it scientifically.
        REPLY ON YOUTUBE

      85. I like this video but it never answered the question posted in the title. It laid out a lot of considerations, which is helpful, but never came to a conclusion. I still do not know if it is better to get a 2, 3 or 5-bay NAS. Near as I can tell it is a wash.
        REPLY ON YOUTUBE

      86. You missed one point. Kinda. It falls in line with the performance aspect. the larger the drive the longer the rebuild takes on a failed drive. So a 4 or 6TB drive, depending on how full the prior drive was may take 3-8 hours depending on the speed of your system / controller. But a 20TB drive could very well take 24+ hours which in turn leaves your array in a vulnerable state for a second failure. BTW this is why NO ONE should be using RAID5 anymore. The happy medium for me is somewhere between 10TB-16TB drives. They offer larger storage, but with a reasonable rebuild time.
        REPLY ON YOUTUBE

      87. Is it better to use HBS 3 for time machine versus the build in qnap method by adding a user and a shared folder with smb 3? I think the second method is more flexible since I can add a user per mac and specify quota and stuff like that
        REPLY ON YOUTUBE

      88. I can’t find your updated version of QNAP NAS Setup Guide 2021/2022 #1 promised in the current version of #1 (https://youtu.be/_kCS6e1ZoiQ?t=2223). Could you provide that URL? Would be nice to have that link in this video’s description area as well us the #1 video.
        REPLY ON YOUTUBE

      89. Another option is 8TB SSD drives. They are much faster, silent, don’t vibrate, use little power and are very reliable.
        I’m not up on linux file systems or RAID wrt redundancy, but maybe 2 x 8TB and a 4 for error correcting, giving you 16? Just accept the risk given the greater reliability?
        REPLY ON YOUTUBE

      90. Great information and I love the presentation. You are definitely not boring, even if some would say the subject isn’t the height of glamour. I bet you could be a stand up comedian too.

        A lot of the useful stuff I have learned about NAS technology is from your videos. Nice one, thanks!
        REPLY ON YOUTUBE

      91. I just bought WD Gold 20TB. Crazy fast Built-in NAND and transfer speed up to 500MB/s !!! and much less noise !! I always love larger drive than small one. Because you will save money to throw away small HDD.
        REPLY ON YOUTUBE

      92. I’ve deceided to get a NAS for home use as a media server. I’m checking out a lot of your videos to make up my mind what I actualy want and need, your videos are great, very detailed and very good explanations of the usage and for whom that particular NAS would be of interest. Kepp it up….
        REPLY ON YOUTUBE

      93. You don’t touch on the fact more drives you are using less data per drive at any write or read.

        If you have 2 large mirrored drives, 100% of the data is processed through each of the drives. If you were to have the same capacity over 8 drives, the actual throughput is divided by 1/8th per drive. If you look at data loads of 300tb per year with an MTBF of 1,000,000 hours, the raid with 8 drives will last 8x longer.
        REPLY ON YOUTUBE

      94. alot od the reason these get hot externally is lack of power none of the external cases for type A and C setups have external power to give the amps it needs which alsows the drive down and makes it work harder and heat up alot.. how ever thunderbolt cases that are non powered same problem but thunderbolt drives with extenral powersource run faster and cooler because they are getting the amps they need to run proplerly internal nvme drives run faster and cooler because insdie the computer they get all the amps they need as well as faster buss lines as well so they can peak out properly , the excessive heat slows your drives not so much as a protection feature its because they are throttleing due to over heat and they have to slow down because they are trying to draw the power they dont have access to and repeated times over overstressing them will fry them been there done that interal wise i have never once had any problems on light or heavey loads .. you did have some good info on there tho and its near impossible to every bit of info in one video that i know my self so over all pretty good job on the video
        REPLY ON YOUTUBE

      95. You should do a video on having multiple drives, vs bigger drives, and the energy costs overall, in difference.

        Energy costs factor alot into this too, especially today with electricity prices for people.

        Your right to do such a vid to point this stuff out, but you could of shown the energy differences also.
        REPLY ON YOUTUBE

      96. These videos are often your best, as so many people have so many varying ways to use hard disks, and there is so many differing options, its good to see a breakdown of what wd are doing.

        Shame, that they often change these things, and shame, they do not just stick to one system of colours and stick to that range, but its understandable that things change in hard disk market.

        Videos like this are often your best, as nas being hard drive based, hard disks, have so many variations, its always good to have people with knowledge on them breakdown what and where you use all the different ones.
        REPLY ON YOUTUBE

      97. I’ve calculated how many GB you get per dollar and looks like the larger sizes give you a much better bang for your buck (14-18TB drives):

        SG IW:
        1TB – $35 – 29 GB/$
        2TB – $65 – 31 GB/$
        4TB – $105 – 38 GB/$
        6TB – $158 – 38 GB/$
        8TB – $177 – 45 GB/$
        10TB – $224 – 45 GB/$
        12TB – $258 – 47 GB/$
        14TB – $271 – 52 GB/$
        16TB – $309 – 52 GB/$
        18TB – $389 – 46 GB/$

        WD RED PRO:
        4TB – $140 – 29 GB/$
        6TB – $173 – 35 GB/$
        8TB – $215 – 37 GB/$
        10TB – $245 – 41 GB/$
        12TB – $253 – 47 GB/$
        14TB – $270 – 52 GB/$
        16TB – $298 – 54 GB/$
        18TB – $349 – 52 GB/$
        20TB – $419 – 48 GB/$
        22TB – $551 – 40 GB/$
        REPLY ON YOUTUBE

      98. Actually, I think in most case It depends on how many IO is on your motherboard
        such as, if you have 4 SATA ports and you used 2, then you will soon realize if you buy too many low-volume hard disks, you will soon be out of IO to let you upgrade in the future
        REPLY ON YOUTUBE

      99. I’ve got this idea recently.. In theory, what about using classic non-NAS type 2,5″ SATA SSD’s? For example four 2TB SSD’s in RAID 5? I know, it’s more expensive. But it’s silent, less power consumption and if I would have money for it? Just for home using, not really too much transfering data and important data will be backed up to external drive too. Is it there some statistics or something? What’s yours opinions guys? I have few data SSD’s in pc for long long time using by daily basis and they are immortal.
        REPLY ON YOUTUBE

      100. Maybe I’m on drugs or something because no one else is commenting on this, but in regards to the first segement “More HDDs Can Be Cheaper…”, your math seems all wrong. If a 18TB costs $389 and 3 6TB cost $158 each the total is $474. The 1 18TB drive is substantially cheaper. It seems to always be cheaper to buy 1 large drive than it is to buy 2 or more smaller drives to reach the same capacity. The one exception seems to be the 22TB RED drive. While its true that the TB per dollar increases the smaller the drive is, it doesn’t do so nearly fast enough to make buying multiple smaller drives worth it.
        REPLY ON YOUTUBE

      101. For most home users, bottom-line .. use RAID 1. What you’re not telling the people is the difficulties in rebuilding a failed multi-disk RAID e.g. 5,6,10.

        Multi-disk RAID 5,6,10,etc is when you need large storage capacities exceeding a single disk capacity. For example, large storage banks of video, photography, workgroups, etc.
        REPLY ON YOUTUBE

      102. More drives is more performance is quicker to spin down is less power used. More competent nas can run server tasks or wake on lan or….using less power in total than a smaller nas can in your total setup.
        Large drives take to long to rebuild to be used in anything less then raid 6
        I rather have more points of failure then 2 drives that are the same type and age and then pray for 24 hours that the remaining drive works to rebuild the raid 1 set.
        And ofcourse raid isn’t backup, always make back ups because if it goes terrible wrong you can lose all your data no matter what setup you have. A fire or flood doesn’t care about your drive size.
        If you don’t put the nas in a place where noise isn’t a problem, use SSD if you use your nas constantly or time it so the drives sleep during the day.
        REPLY ON YOUTUBE

      103. I too am a novice here, and found this incredibly helpful. Thanks so much for this from sunny Sheffield in the UK 🙂 I know you like QNAP, my Hi-Fi specialist suggest QNAP, but judging by security concerns from another of your videos QNAP v Synology, I had cancelled a 2 drive QNAP on Amazon, to rethink, and possibly have a 4 drive Synology. My Hi-fi specialist will only support if I bought a QNAP….. now that is very a difficult decision..!! Oh, and stop using big words.. lol.. ie, nebulous..!!
        REPLY ON YOUTUBE

      104. the wd red pro and iron wolf are not enterprise drives. they are consumer nas rated drives. Ultrastars are Wd enterprise drives used to be Gold and Exos Drives are Seagates Enterprise hdd
        REPLY ON YOUTUBE

      105. It would clearly help to get a better grip of this topic and your conclusions, if you would visualize e.g. the performance, power consumption etc. of the different SSDs., This way everyone could easyly see the sweetspot of the price and the number of drives. We humans are visually predisposed ????
        REPLY ON YOUTUBE

      106. It is important to also consider rebuild and restore performance. With a larger number of drives running RAID 5 or 6 there is a significant difference in rebuild time compared to rebuilding a mirrored array. Also there is a difference yet again when you compare something like a RAID 10 to a pool of mirrors instead. In the case of RAID 5, 50, 6, 60 and 10 your backup will be of the entire array. In the event that data loss actually occurs and you must restore from backup you are talking about restoring the entire size of the array that was lost. However, when using pools instead you can elect to restore only the data from the underline RAID 1, 5 or 6 that you lost. These are all important factors to consider when selecting how you want to build out your storage array.

        Also I should mention that if you are going with a lot of drives it is also possible to hybrid nest the arrays in such a way as to maximize performance while also minimizing your restore from backup time and risk of inaccessible data. For example you could take two drives and place them in a RAID 0 then take two more drives and place them in a different RAID 0. Then you take those two RAID 0 arrays and Mirror them together. You create sets of 4 drives in this method that you then pool together. The obvious con to this is that you would ideally add sets of 4 drives at a time to your pool.
        REPLY ON YOUTUBE

      107. The biggest point you’ve missed is that the best way to shop us to first identify your risk tolerance, and then identify the workload needs, and buy either the largest drives you can afford that give you more redundancy than you think you, need or the fastest drives you can afford that give you more iops than you think you need. Your video also completely neglected iops, focusing on sequential io and capacity. Even just adding a small nvme mirrored cache device can turn a large disk pool into a virtualization and game storage powerhouse. Imagine what you could do with all-flash
        REPLY ON YOUTUBE

      108. If you are into data and/or storage then you can never have enough space.
        Cheaper long term to buy the biggest NAS with biggest hdd’s, Otherwise you will run out of space and cost you more to replace all those smaller hdd’s or smaller NAS.
        Not really worth it to buy the expansion unit only to fill it with more smaller drives.
        Made that mistake with my first NAS, 5 bay and only filled it with 3x8TB (1 for redundancy) drives adding another 2 later on.
        Thought I was being smart and saving money, Filled it after 3 years, I regret not going for 16TB drives at the start and would have lasted twice the time 6 or more years.
        REPLY ON YOUTUBE

      109. After an almost critical incident, hot spare makes more sense to me. If not go for dual drive fail safety in synology to stay safe. Avoid buying drives from the same batch, I went as far as buying drives from different stores and different months.
        REPLY ON YOUTUBE

      110. I always tend towards the higher end of drive sizes but normally stay a step or 2 below largest capacity so I can have a better price per TB and just know that I can get bigger for cheaper in the future I prefer having expansion bays in my system open as my storage needs grow as that always have and will continue to
        REPLY ON YOUTUBE

      111. One idea to consider is the difference in power for say 4 big drives (say 14TB each with 1 parity) versus 12 small drives (say 4TB each with 2 parity).

        The comparison of a small size storage ( smaller than 20 TB ) I think was the focus of the video and not larger size storage (35+ TB storage sizes.

        Overall the video hit the points I think are important.
        REPLY ON YOUTUBE

      112. Backing up 10 drives with several computers much faster. You also probably should not use 1 partition unless you want to wait 2 days to complete a back up.

        I have heard many never make backups, so imagine the panicked person thinking his hard drive is failing, then waiting two days to see if the new drive got it all?
        REPLY ON YOUTUBE

      113. Hey nice one for this KNOWLEDGE so much appreciated seriously thx fella now I’m informed to the max & really appreciate the effort with getting it to video top job !????????✅????
        REPLY ON YOUTUBE

      114. Thank you these great video’s, I highly appreciate them!
        If I may ask a request on a video. using QNAP NAS and running Qumagie. How do you backup meta data from Qumagie as they are stored in an Qumagie database and not in the photo or on a separate file.
        Ronny
        REPLY ON YOUTUBE

      115. The required amount of redundancy depends on how you plan to use the storage. If the NAS is the primary storage, then redundancy is very important. If the NAS is backing up primary storage on other computers, then RAID might be less critical for some people. The other consideration is point in time, or off-line, copies. If you have a fire or a ransomware attack, it might take out the whole NAS. Therefore, you need protected offline copies. That means maybe double or even more storage. How should we provide that? Does that remove the need for redundancy in the NAS?
        REPLY ON YOUTUBE

      116. Really interesting video, thanks. Here are a couple of ideas on presentation of the numbers: 1. Produce a line graph of price against drive size. That would make it clear that the price per terabyte drops a lot from 1TB to 20TB drives – $35 from to $21 per TB on pros. 2. Compare prices for some sample configurations with the same amount of usable storage.
        REPLY ON YOUTUBE

      117. Recently got an 8 bay QNAP, but getting disk combo nail is more challenging.
        Current stack of drives don’t give me what I’m ideal after
        3 x 3TB
        4 x 4TB
        2 x 12TB
        Will prob get rid of the 3 and 12TB drives for more 4TB
        The 12TB are HGST ultra star drives, as you say noisy too, but that’s not an issue.
        Got 2 X 32Gb for cache
        REPLY ON YOUTUBE

      118. This channel is so bad. Here in America I’m getting 12 TB Exos drives for $110 each, 6TB Hitachis are $45, and you can buy a motherboard, cpu, sas card, and a few drive cages for a lot less than the price of those pre-assembled and not expandable NAS cases
        REPLY ON YOUTUBE

      119. Appreciate your content but I do think you can benefit from shorter videos that get to the point a lot quicker. I find myself scanning and skipping through your videos a lot because I just don’t have half hour plus to dedicate to something, especially when I can Google and find an answer within 1 minute. Your content is mostly informational so getting to the point quicker is going to be much appreciated by everyone. Maybe start with the conclusion and then continue with the details as to how you reached your conclusion. ????
        REPLY ON YOUTUBE

      120. I think the bit you didn’t really focus on when comparing two 18TB drives vs 5 smaller drives was you dropped from a RAID Mirror to a RAID Array. That is often a big performance drop. Also replacing & rebuilding a RAID 1 mirror is faster. And if you lose both, and want to pay someone to do disk plater recovery, the probability of retrieving usage data, drops significantly when they need to reconstruct the data off multiple drives.
        When might you lose both RAID 1 drives simultaneously? Domestic: Voltage spike/lightning. Commercial: Some idiot unscrews the wrong thing & drops all disks on the floor.
        REPLY ON YOUTUBE

      121. Why not “more bigger hard drives?” When I bought my NAS I got four of the biggest HDD I could at the time. Now they make drives that are almost twice as large, so I’m jonesing for an unneeded upgrade.

        The noise is a legitimate concern, but I think for most people the best solution is to try and have a wiring closet / server room type setup and put it in there where you won’t really hear it. Of course, the problem with that is that the house basically needs wired for ethernet with a patch panel. I wish I had that.
        REPLY ON YOUTUBE

      122. There´s a interesting point to consider the multiple disk use. The SATA saturation (or other conector). If you are using the 10 Gb connector and/or VMs and docker applications.You can saturate the data bus with to much IO, exceding the SATA read/write capacity, and depending of biggest caches in SSD. And surprise, more probability of failure via hard/soft or energy. With multiple smaller disks more data can be read and write. The trick is what is the size of storage that you need and what size of NAS (slots) you have (including the extenders).
        REPLY ON YOUTUBE

      123. Quality content ,love it

        Currently got 8 PCS mg05 8TB which is super noisy when using in regular plastic Nas

        Moved into a node 804 they are way less noisy on ticking .
        Red 4TB non SMR is just fine, they are way silent compare to the mg05
        REPLY ON YOUTUBE

      124. Agree head spinning. (5400?) My current problem is ripped blu rays will not stream via Plex over my network to fire TV. Having to convert down hard. Is it my network speed? (How do I test) is it my internet speed? (Max 33mbs).
        REPLY ON YOUTUBE

      125. As a novice, this makes my head spin. I’m thinking about a NAS to put all my video, music, and photos in one place, with backup, and if I can afford it, allow it to be cloud storage for my kids. I have 25TB of external drives, and while it’s good for storage (I’m afraid of disk failure and data loss). I’m totally lost as what to do.
        REPLY ON YOUTUBE

      126. Having just replaced or added HDD’s to both my 4 bay Synology and my 4 bay QNAP, my next NAS purchase to replace one of these will be an 8 bay. And I’ll install 3 larger HDD’s in RAID 5 or Synology Hybrid RAID and add new and larger drives as the need arises and prices fall. The worst thing about smaller NAS is the cost of pulling out perfect good, decent sized HDD’s because you need to replace them with larger drives. This is especially problematic with QNAP as you need to have all drives be the same size. With Synology’s SHR, drive sizes can be mixed ( although even that is not perfect). The extra cost of an 8 bay vs a 4 bay is easily saved by the ability to continue to use my older, smaller HDD’s. Don’t be deterred by up front costs; look at longer term use and future purchases and redundancies.
        REPLY ON YOUTUBE

      127. If a drive in a RAID configuration fails, it takes longer to restore a large driver than a smallere. Thus it takes longer time before the redundancy is restored.
        We are talking time in the order of days. During that period another disk failure leads to full data loss
        REPLY ON YOUTUBE

      128. I would have divided the presentation between Consumer needs/suggestions and business needs/suggestions:
        in case of business you need IOPs and you do not care about noise because you have a datacenter (for small that it can be), so smaller disks in higher number give you better performance anche noise means Enterprse disks which have higher number of TB/year. at the same time as enterprise, for small that you can be, you should implement the 3-2-1 backup rules or at least having a backup site. the additional point is having a redundant power supply on your NAS.
        for the remaining part, what you said is perfect for a consumer site.
        REPLY ON YOUTUBE

      129. Thank you for the thorough video! Perhaps one other aspect to consider is the best way to increase space with a 4-bay NAS that has expansion capability. I have a 918+ with 4x4TB. Shall I replace the drives with 4x8TB drives, or shall I daisy-chain a second 4-bay NAS with another array of 4x4TB?
        REPLY ON YOUTUBE

      130. I’ve mentioned this before, but if you are shopping for Pro drives, the only way to go is enterprise (Exos, Ultrastar). Depending on region they are much cheaper and also better.
        REPLY ON YOUTUBE

      131. I have an 8 bay DS1821 with 4x 8TB. The rationalisation was that as my data needs grew I could either add more 8TB or on the basis that over time costs would come down start adding say 12TBs and through SHR move to an all 12TB RAID.
        So far so good.
        REPLY ON YOUTUBE

      132. Thanks Man! I know you since the days of my first NAS, a trusty old QNAP TS-269 Pro which is really a long time ago. And you are still passionate like day one about all things NAS and beyond, how is this even possible? Always great info, always on Top. Just Wow, yeah, just WOW and thanks for all the Seaguls. I would consider a video from you without “i hate seaguls” as beeing not authentic. yeah, i love this. ????All the best for 2023 and beyond! — Bernd
        REPLY ON YOUTUBE

      133. Can I use RAID at a software level (TrueNAS) with sata pcie expansion cards that are not RAID capable at a hardware level?

        I’m building my very first NAS with a PC I’m retiring in a couple of months, and my motherboard does not have enough sata for the number of HDDs I want, there are a lot of sata pcie expansion cards on amazon but many of them say they are non RAID cards, so I’m not sure if I should buy them, if TrueNAS will be able to set the HDDs connected through that card in a RAID configuration.
        REPLY ON YOUTUBE

      134. Appreciate the mention that if you buy a number of the same drive from the same vendor you are likely to get drives from the same lot which if that lot has a problem means your risk for trouble is increased.
        REPLY ON YOUTUBE

      135. In general, would it be better to go with a 2 Bay NAS with two 14TB WD Red Plus drives (larger capacity but still on the quieter side), or a 4 Bay with smaller drives? This is just for home use for storage and streaming videos.
        REPLY ON YOUTUBE

      136. It would be really interesting to me if you could make videos at regular intervals for things like When will the price of hard drive come down and when will we see bigger capacities in the small classes.
        REPLY ON YOUTUBE

      137. Nice video!
        I always calculate the price per TB. 😉
        As that way there is often a HD-size (and above) that the price per TB is higher than the smaller/previous-size one. (price per TB)
        We often opt for a wee bit smaller but more drives. As we always have 2x cold standby HD’s (thus unused!) near the NAS.
        But more drives also means more power-use as you already indicated and also more heat. (more cooling might be needed)
        Business-wide you should replace your HD’s every 3 years (5 years, max) but for the average user at home, you replace when really needed. (or after 10 years?)
        To reduce risks, we also opt for multiple NAS. As a NAS may fail (power-supply, firmware-upgrade, bricking)
        With larger drives the rebuilding of the RAID also may take longer., when something does go wrong.
        BTW, also worth noting, the weight of the NAS might become significantly higher when you are using more drives (noticeable after 8x drives IMHO)
        Generally speaking, the 6TB and lower are robusts as rocks (longevity), 8TB to 10TB are often the sweet-spot for pricing in my experiences.
        Word of advice: buy as many drives as can fit in your NAS as down the line by the time you want to buy additional drives, the manufacturer may have moved-on to newer models..
        REPLY ON YOUTUBE

      138. Factoring in that I had a stack of unused drives already, my first Synology was a 12 bay. I filled it with 1tb-6tb drives and was golden since that meant I didn’t need to buy drives until I needed more space(which happened, again and again ????)
        REPLY ON YOUTUBE

      139. I think it really depends where you are and what you can get. In some countries, it’s cheaper to get bigger drives and a two bay NAS, where other places, smaller hard drives and a four bay NAS ended up being the better option. I’ve always tackled it as a your-mileage-may-vary scenario.

        Although if you want maximum capacity, a bigger NAS is the way to go.
        REPLY ON YOUTUBE

      140. Hello, I followed you previous video and now I looking at this one. I see that now you have THREE more
        folders that where not there before. I see “home” “homes” and “Multimedia” can you explain where they came from? After a Drive failure and a NAS refusing to rebuild, I reset my NAS to default, formatting initializing everything, now I want my system working as it did before…..I am not seeing “default folders”
        REPLY ON YOUTUBE

      141. ???? Please could you site your pricing sources?

        I cannot find a WD Black SN850 2TB (not the X version) for anything less than £260. Yet you have the upper cost of an SN850 as £188 which I’m assuming you mean is the cost for a 2TB.

        Unless I’m reading the figures incorrectly?
        REPLY ON YOUTUBE

      142. Thank you for this very informative video.
        Here is the scenario: i want to buy one of those NVME pcie m.2 drives to use instead of the normal USB stick, so am also getting an enclosure with a usb type a, what i wanna do is partition this drive to 2 partitions and use one of them to install a linux os to take it with me, am not looking at something over 256GB.
        Question is: will this be a better drive over using a normal usb stick, since i will be using the nvme with a usb type a and connected directly to the MB to launch the OS?
        Thank you for your time.
        REPLY ON YOUTUBE

      143. FASTASTIC video as always!

        If you allow me one question please

        In the min 10:54 when you talked about backup the main NAS to a second NAS
        using Hyperbackup, you talked about doing it in the morning when the NAS is less use

        If i run the backup let say at 3am, my pc will be “sleeping”. Will Hyperbackup work even though the pc is “sleeping”?

        Thanks in advance
        Have a Productive and Healthy Day!
        REPLY ON YOUTUBE

      144. Let’s see if I have this right: QSync is going to “merge” changes made to a single file by multiple users? So it is a content management app? Just asking…
        REPLY ON YOUTUBE

      145. I have one hair follicle left after trying EVERYTHING to get a Qnap TS-212 to backup to a new TS-231P3. The ‘problem’ is that HBS is different on the old NAS and no matter what I do, I cannot get it to allow a backup. So, I worked around the problem by accessing the newer TS-231P3 using HBS 3 and telling that to ‘restore’ the folder of all my work, rather than backup. I’m at 5% and counting. Fingers are crossed.
        REPLY ON YOUTUBE

      146. Rarely make a comment but your videos are exceptionally good, seen many of your videos about NAS and the content is satisfying while you keep it simple and informative.
        I have a question regarding the heat and a NAS. Will a heatsink fit in for example a synology 920+? Is it even needed in a NAS?
        Wish you good luck and many subscribers
        REPLY ON YOUTUBE

      147. If you add a 00:00 time to the chapter list it will add the chapters to the scrubber (video progress bar), you can for example call it: 00:00 Intro

        Great videos, love the in depth explanation. It is easy to set up the NAS, but to really use it is hard, so thanks a lot!
        REPLY ON YOUTUBE

      148. Hi, thanks for the information and the explanations were exhaustive. Post Scriptum (PS.) We cannot write or speak English so we use the translator and we apologize if any word or phrase does not come out in the correct form … ????
        REPLY ON YOUTUBE

      149. I’ve got a GTek armour which is brilliant, but I’ve had the same issue with it as I’ve had with almost every other USB drive I’ve ever used, and that’s the connector. Over time, it gets loose, it gets worn, it causes issues. It’s a total P in the A and until we get HDDs that connect wirelessly at decent speeds without the need to have ANY connection, this is always going to be a problem
        REPLY ON YOUTUBE

      150. Bought an Asus ROG M.2 enclosure and a 1TB Crutial P2 to store my professional work on and I absolutely love it! Solid 1Gb/s read and write speeds (dont have a thunderbolt port). Massive upgrade from my old drive, not super expensive and I can swap out the drive whenever I want! 🙂
        REPLY ON YOUTUBE

      151. Great vid! Glad you brought up the subject. As a heads up guys, do NOT consider the Samsung “T” series drives (5 or 7).They are expensive and unreliable. I bought 2 and they ALL failed within 6 months. With a 2 yr wrnty Samsung would NOT support it because it was bought on Amazon, and Amazon put in the Manufacture vs Seller Loop. Going to check this out – Thank you sir.
        REPLY ON YOUTUBE

      152. Thank you very much for these helpful videos. I’ve got a TS-128A and a TS-230 to setup and I’ve only had experience with Synology and WD NASes previously. Seems like QNAP is more complex but more flexible at the same time with generally better hardware for the price.
        REPLY ON YOUTUBE

      153. Loving the videos! Thank you 🙂

        My QNAP arrives next week. I’m at about 36 mins in this video so far so if my question get’s answered then don’t worry… I’m currently using Dropbox to sync a folder we’re both working in on my computer and a colleague’s computer over the internet. How would I do this with QNAP?

        AND I send files to clients by right clicking and hitting “make transfer” with Dropbox. Can I do that with QNAP or do I have to use the web interface?
        REPLY ON YOUTUBE

      154. When I open Snapshot Replication app on DS7, it warns me that my volume is recording ‘last file access time’, and this may affect snapshot performance. It tells me I can disable this by going into Storage Manager, but that setting is nowhere to be seen. Any ideas?
        REPLY ON YOUTUBE

      155. Briefly explained! I am very thankful to you for making this video.
        SUGGESTION: Add chapters (Time lapse) in this video. It will also rank on their chapters keyword on Google which will increase your reach to your Targeted Audience. This video help me alot. Now I have knowledge about SSD I think it will help a lot of people who are struggling with SSD Differences. *Add chapters.
        REPLY ON YOUTUBE

      156. You also forgot to mention to check the cpu spec to see if it can handle the PCIe usage. The MB may have slots and lanes, but can the CPU support the config you want.
        REPLY ON YOUTUBE

      157. I believe you have omitted an important & easy to identify fact how it is very easy to identify if you have a M.2 SATA or a M.2 NVMe;
        The M.2 SATA always has a so-called M Key and a B Key (thus 2x gaps on the connector) whilst the NVMe only has the M Key (thus only 1x gap)
        Fun fact: you can sometimes use & insert a M2. SATA into a M.2 NVMe slot []-)
        REPLY ON YOUTUBE

      158. Too bad we didn’t hear anything about DRAM vs DRAM-less SSDs. The latter you really want to avoid if you look for performance. The market is full of cheaper SSDs without DRAM cache.
        REPLY ON YOUTUBE

      159. You’re misusing word “layer” for flash cell types. It’s “level” that stands for “L” in those abbreviations and it is related to the amount of charge levels (electrons trapped) that are distinguishable for a cell. SLC is either “there’s no charge” or “there’s a charge” representing 0/1. For QLC it is 2 to the power of 4 different charge levels = 16 states distinguished meaning such cell is capable of storing 4 bits of information. For MLC it is 4 states, TLC – 8 states. The more levels you try to distinguish the smaller difference between them and thus more error prone it becomes. Nevertheless it’s all about “levels”, not “layers”. As for “layers” – nowadays it’s typically refers to the amount of individual cells that are distinguished in a single 3D NAND cylindrical vertical element – which is the main way to scale NAND flash capacities lately vs. using good old “planar NAND”.
        REPLY ON YOUTUBE

      160. Need to replace my system nvme drive for windows – was and WD750 1TB, and I’ve got great performance out of it, but now I need something bigger and might as well go full Gen 4. Any recommendations for long term durability and overall performance? Considering the seagate 530, for the durability or the 980 pro, but I’m open to other suggestions. Looking for Gen 4 2TB drives.

        MB – x570 MSI creation board
        REPLY ON YOUTUBE

      161. I think you missed one more important point: Drives with DRAM cache vs DRAM-less drives. The latter is obviously much cheaper and offers lower performance and durability for most use cases. Both types of drives are still much much faster than any HDD, so if you are on a budget, a DRAM-less driver is still a good upgrade over an HDD.
        REPLY ON YOUTUBE

      162. You are my number 1 channel when it comes to hard drives of all kind. Thank you for taking your time teaching us how to understand this field and how to make the best decision when it comes to what we would need.
        REPLY ON YOUTUBE

      163. Can you help me with one question: I have MacBook Pro M1 and I also bought OWC Thunderbolt 4 Dock for giving my MacBook more ports with different PCIe controllers. And now I want to buy FireCuda 350 2 Tb NVME m.2 and an ACASIS USB4/Thunderbolt 3 enclosure. Can I reach something about 2500-3100 Gb/s with this gear on my MacBook Pro M1?
        REPLY ON YOUTUBE

      164. Great videos, what I would love for you to talk about. Is there a way to connect two qnap tvs-x72tv via thunderbolt cable (directly connected) this would be a huge benefit given the massive amounts of data these things hold and the slow transfer speeds of gigabit. Thunderbolt direct connect would be awesome. I have my two units daisy chained from my Mac. Mac has not issue seeing either. QBS wont use for backup
        REPLY ON YOUTUBE

      165. Recently I have discovered the OWC Thunderbay, that seems to fit my needs: basically, a single user for video editing on Mac, connected via thunderbolt or USB-c, and providing a fast storage with relatively lower price. I understand that the RAID management has to be done in the computer and on on the NAS/DAS. But I see no reference to the OWC Thunderbay on this channel, so I wonder if there are hidden problems. It would be so interesting to have your opinion.
        REPLY ON YOUTUBE

      166. Gouda explanation, very clear and easy to follow, was a bit Cheesy but I’ll take it because there’s stiltonnes of things I have to learn, but with this info my backups will be as robust as a Roquefort ???????? thanks as always
        REPLY ON YOUTUBE