Optimizing QNAP TVS-h1288X for Efficient Editing of Red Raw Files: Tips and Solutions for Enhanced Performance

I am using a QNAP TVS-h1288X to edit Red Raw files. The files are slow to open and I am unable to edit them. Can someone there help? I am willing to pay for hands on assistance. Please let me know.


If you’re experiencing slow performance when working with Red Raw files on your QNAP TVS-h1288X, there could be a bottleneck affecting the overall performance. Let’s explore some potential solutions to address this issue.

Firstly, ensure that you are using a 10 Gigabit Ethernet (10GbE) connection between your NAS and PC. This connection speed can significantly enhance data transfer rates. Confirm that both your NAS and PC are equipped with 10GbE network interfaces, and if necessary, use a compatible switch to establish a direct connection.

Next, consider the storage media you are using. Traditional hard disk drive (HDD) RAID configurations may limit performance due to slower read and write speeds. To improve performance, you can explore alternative storage options. One option is to create a volume using NVMe SSDs, which offer significantly faster data access speeds. Alternatively, utilizing SATA SSDs in a dedicated volume can also boost performance compared to HDD-based configurations.

In addition, verify that both your NAS and PC are configured to utilize jumbo frames with an MTU (Maximum Transmission Unit) size of 9000. Enabling jumbo frames allows for larger data packets to be transferred, reducing network overhead and potentially improving performance. Ensure that jumbo frames are enabled on both the NAS and your PC’s network interface settings.

By optimizing your network connection, utilizing faster storage options, and enabling jumbo frames, you should see an improvement in the performance of opening and editing Red Raw files on your QNAP TVS-h1288X NAS. If you require further assistance with hands-on troubleshooting or configuration, consider consulting with a professional technician or reaching out to QNAP support.

If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  


Or support us by using our affiliate links on Amazon UK and Amazon US

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE