Can anyone suggest a USB UPS that is compatible with the DS218+ for use in the USA and under $200?
Cheapest UPS (Uninterruptible Power Supply) For Synology and Qnap will be from CyberPower value series. They come with USB port which need to be connected to your NAS. Then within a NAS you can set the rules what happens wen electricity is gone. There is always Cheap, cheaper and cheapest UPS- what matters is the time it will last without power.
The cheapest UPS for Synology & Qnap NAS is CyberPower VALUE 600EILCD Value Series Uninteruptible Power Supply
|Item Weight||4.8 Kg|
|Product Dimensions||30 x 10 x 14 cm|
|Item model number||0R60007|
|Number of USB 2.0 Ports||1|
|Number of Serial Ports||1|
just to let you know the information. I just went and buy budget UPS PowerWalker VI 850 SHL and it works normally with my DS-418play. The NAS recognize it. Tested and it shows it can run around 57 min in battery mode. I have two disks curretnly in my NAS and Ubee router is also connected to same UPS.
To enable local UPS support on Synology:
- Connect the UPS device to a USB port of the Synology NAS.
- On the UPS tab, check the Enable UPS support checkbox.
- Select when the Synology NAS should enter Safe Mode after power failure occurs.
- Choose whether or not to send a shutdown signal to the UPS device when the system enters Safe Mode. Most UPS devices can automatically turn on when power is restored.
- Click Apply.
Standalone Mode – USB
To operate under USB standalone mode, follow the steps below:
|1.||Plug in the USB cable on the UPS to the NAS.|
|2.||Select the option “Enable UPS Support”.|
|3.||Choose between whether the NAS will shut down or enter auto-protection mode after the AC power fails. Specify the time in minutes that the NAS should wait before executing the option you have selected. After the NAS enters auto-protection mode, the NAS resumes the previous operation status when the power restores.|
|4.||Click “Apply All” to confirm.|