Qnap QSW-M2106PR-2S2T Half-width Rackmount 10GbE and 2.5GbE PoE++ Layer 2 Web Managed Switch

Qnap QSW-M2106PR-2S2T Half-width Rackmount 10GbE and 2.5GbE PoE++ Layer 2 Web Managed Switch


Management Type Web Managed
Number of Ports 10
10GbE SFP+ 2
10GbE BASE-T (RJ45) 2
2.5GbE (RJ45) 6
Total PoE Ports 8
PoE++ PSE (802.3bt, 90W) Port 1-8 (90W)
PoE Power Output Port 1-8 (90W)
Total PoE Power Budget 310W
Power Supply Description Internal Power Supply Unit
Max. Power Consumption 350W
Input Power Type AC
Input Voltage Range 100-240VAC, 50/60 Hz
MAC Address Table 16K
Total Non-Blocking Throughput 55Gbps
Switching Capacity 110Gbps
Management Interface Web
Console RJ45
Energy Efficient Ethernet (IEEE 802.3az complaint)
Fan PWM VAPO Bearing fan x 2
Supported Standards IEEE 802.3 Ethernet
IEEE 802.3u 100BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-SX/LX
IEEE 802.3an 10G BASE-T
IEEE 802.3ae 10G Fiber
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1Q VLAN Tagging
IEEE 802.3ad LACP
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3af/at/bt Power-over-Ethernet (PoE)
Form Factor Rackmount
LED Indicators Per Port: Speed/Link/Activity
Per System: Status/PoE/Fan
Buttons Reset button
Dimensions (HxWxD) 43.3 x 207 x 248.8 mm
Weight (Net) 3.9 lbs
Weight (Gross) 5.6 lbs
Operating Temperature 0˚C to 40°C (32°F to 104°F)
Relative Humidity 5~95% Non-condensing
Certifications CE, FCC, VCCI, BSMI
Electromagnetic Compliance CLASS A
Jumbo Frames 9K
Warranty 2 Years
Standards Compliance
  1. IEEE 802.3 Ethernet
  2. IEEE 802.3u 100BASE-T
  3. IEEE 802.3ab 1000BASE-T
  4. IEEE 802.3bz 2.5G/5GBase-T

Show more…

Port Management
  1. Port status
  2. Port statistics
  3. Port configuration
  4. Jumbo frame support

Show more…

  1. Port-based QoS
  2. IEEE 802.1p CoS
  3. IPv4 DSCP-based QoS
  4. IPv4 ToS-based QoS
  1. VLAN configuration
  2. IEEE 802.1Q-based VLAN
Layer 2 Features
  1. LACP
  2. IGMP snooping v2
Security Access Control Lists (ACL): ACL by IP address, ACL by MAC
Firmware management
  1. Firmware Live Update
  2. Firmware Manual Update
Other Features
  1. Link Layer Discovery Protocol (LLDP): LLDP remote device
  2. Interface: Web UI
  3. SNTP, DNS, DHCP client
RSTP IEEE802.1w Rapid Spanning Tree






Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

If you like this service, please consider supporting us.
We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you. Anything you purchase on the day you click on our links will generate a small commission which is used to run the website. Here is a link for Amazon and B&H. You can also get me a ☕ Ko-fi or old school Paypal. Thanks! To find out more about how to support this advice service check HERE   If you need to fix or configure a NAS, check Fiver   Have you thought about helping others with your knowledge? Find Instructions Here  


Or support us by using our affiliate links on Amazon UK and Amazon US

locked content ko-fi subscribe

DISCUSS with others your opinion about this subject.
ASK questions to NAS community
SHARE more details what you have found on this subject
CONTRIBUTE with your own article or review. Click HERE
IMPROVE this niche ecosystem, let us know what to change/fix on this site
EARN KO-FI Share your knowledge with others and get paid for it! Click HERE