The Jonsbo N4 NAS Case Review

Jonsbo N4 NAS Case Hardware Review – Technically ‘Jonsbo N2 and a Half’?

I think it would be fair to say that in the world of DIY NAS building, few brands have achieved a similar level of notoriety and acclaim as Jonsbo. This Chinese brand, once non-descript and relatively unknown, promises efficient and cool server enclosures, eventually getting their products front and center in the most prestigious communities for those building their very own server from scratch. At the start of 2024, we saw the release of the Jonsbo N4, a new desktop NAS chassis that seemingly wants to coexist between the profiles of the rest of the devices in their portfolio. Arriving slightly less scalable than that of the N3, yet offering more physical space than that of the N2, the Jonsbo N4 is, however, the first NAS enclosure by the brand to support M-ATX motherboards—an exceptionally long-requested feature! So, is this new Jonsbo enclosure a better purchase for you and your aspiring DIY NAS build? Does it deserve your data?

Note – You can watch my review of the Jonsbo N4 NAS Case HERE on YouTube

UPDATE – The Jonsbo N4 NAS Case is Now Available to Buy on AliExpress HERE

Jonsbo N4 NAS Case Hardware Review – Quick Conclusion

I like the Jonsbo N4 NAS Case, but there is no denying that for so many reasons the N3 is a superior NAS enclosure. Earlier this year when the N4 was first announced, we made a comparison guide on the N2, N3 and N4 (HERE) and reached the conclusion that the N4 was arguably the most niche unit of the series so far, making us wonder if perhaps Jonsbo had got these numbers in the wrong order! Fast forward to now and when we have spent some time with the N4 case and that opinion has not changed at all! The N4 IS a good NAS case, but in efforts to support MATX motherboard use, strange choices have been made in what to do with the increased dimensions afforded to the system. The arrangement of the SATA storage bays is weirdly inconsistent, the decision to go for 6x 3.5″ and 2x 2.5″ (instead of just going ‘route 1’ and just opt for 8x 8.5″ SATA) is a stance choice in 2024 (as the focus on SSDs rapidly shifts away from 2.5″ to M.2 NVMe, onboard MoBos). The funnelling on cables on the system is very clear, the PCIe card frequency is high and the physical design and aesthetic appeal are better on the N4 than any other Jonsbo NAS case. But the reduced motherboard cavity space and it’s impact on optional rear fans, smaller CPU coolers and half-height PCIe cards is going to be a hurdle for more enterprising users! For under $100 (without delivery!), Jonsbo is still going to be the ‘go-to’ NAS case manufacturer in 2024 onwards, but the Jonsbo N4 is still a little more niche a proposal in terms of its physical appeal to a lot of users. A good DiY NAS Case, but make sure that you look into the N2 and N3 case first, as you might find more to love there!

Model: N4 (Black / White)

Dimensions: 286mm (W) x 300mm (D) x 228mm (H) / Material: 0.7mm Steel + Wood, Weight: 3.75kg

Storage: 6x 3.5″ HDD slots + 2x 2.5″ SSD slots

Motherboard: ITX / Micro-ATX

Ports: 1x Type-C USB, 1x USB 3.0 Type-A

PSU: SFX (up to 125mm in length) / Maximum CPU Cooler Height: ≤70mm

PCI Expansion: x4 , Maximum Graphics Card Length: ≤230mm

Cooling: 1x 120mm fan (built-in)

Check AliExpress HERECheck Amazon HERE


Jonsbo N4 NAS Case Hardware Review – Packaging and Shipping Presentation

Arriving in a Jonsbo-branded case, much like other solutions by the brand, the N4 is currently only available on AliExpress. With a sub $100 price tag, it’s the delivery costs of around $40 to $50 that might surprise you. Eventually, this case will no doubt become more widely available across traditional e-commerce outlets, but at launch, this system seems to arrive at a comparative price point to the rest of the Jonsbo NAS enclosure family.

The page pretty much gives you all the information you’re going to need for an exclusively e-shop purchase. And, for something that most would largely assume would arrive in plain brown box packaging, the N4 retail package is actually surprisingly nice and provides a decent amount of detail.

The contents of the Jonsbo N4 retail package are pretty standard. The enclosure is encased in hard black foam, and the accessories are all included in a branded white accessory box. The unit I ordered online was unscathed, despite the shipping container having a few dents.

Emptying out the retail container and shipping box provides us with pretty much everything I expected. There is the unit itself, but also a fold-out A4 installation guide. There are numerous screws and cable ties for use during the installation.  And finally, there is the assortment of drive handles and rubber grommets. I will discuss these more later on, but that is pretty much everything you get with this system.

The system is not officially available for purchase pre-populated with a power supply, nor does it arrive with any SATA or Molex power cabling included and pre-attached. This is quite a bare-bones NAS enclosure, and alongside the obvious purchase of a motherboard, CPU, memory, and PSU, etc., don’t forget that you’re almost certainly going to need those SATA fan-out cables and possibly Molex power adapters.

Overall, I’m happy with what I’m getting here, and as long as you know that you’re getting a bare-bones NAS enclosure, there’s nothing to be unsatisfied with here. Let’s discuss the external design of the N4.

Jonsbo N4 NAS Case Hardware Review – Design

The Jonsbo N4 case is approximately the same height as the N2 but distinguishes itself by being the widest NAS enclosure from the brand, largely due to the support for the larger M-ATX motherboard cavity internally. Interestingly, this system manages to be nearly identical to most other eight-bay 3.5-inch SATA NAS cases, while technically being a six-bay case traditionally.

There is ample passive ventilation throughout the entire NAS enclosure. Each side of the casing features a ventilation strip positioned beside the motherboard once installed, and the top panel also has a large ventilated area in the metal top cavity to assist warm air in naturally rising out of the case.

The design also introduces a real wood front panel purely for aesthetic reasons, not unlike the AUDHEID 8-bay case. It is surprisingly high quality, even if it largely offers minimal technical or operational improvement to the enclosure. The N4 is available in both black and white metal enclosure options, and although I have the black version here, I would argue the white version looks quite unique with the wooden panel motif. The wooden panel, situated directly in front of the motherboard internally, should not present any heat concerns due to significant passive ventilation around it and ample pathways for the internal CPU cooler to circulate air throughout the system behind this panel.

The storage area of the N4 is located behind a magnetically attached and ventilated front panel at the base of the system. This panel, easily removable via two finger hooks on either side of the enclosure, reveals the individual SATA storage bays of the N4. This vented and mesh dust-protected front panel is of reasonable quality and addresses the inconvenient access to storage bays seen in previous models from the brand.

Overall, I’m quite pleased with the small aesthetic improvements made in the Jonsbo NAS system over the units that preceded it. Drive bay access has been simplified, the stylistic integration of wood and metal paneling looks appealing, passive ventilation is well-designed and plentiful, and overall, the case feels high quality and not at all cheaply constructed. Let’s discuss the storage potential of the Jonsbo N4, as this has been a topic of heated debate ever since the brand announced this new enclosure.

Jonsbo N4 NAS Case Hardware Review – Storage

Discussing the storage capabilities of the Jonsbo N4 has, in the month since its launch, drawn a lot of debate. The system arrives with two tiers of storage: 3.5-inch SATA media and 2.5-inch SATA media. Unlike previous releases by the brand in this enclosure series, all storage media bays are directly accessible via the front of the casing. The first-generation system was a two-drive system, the N2 was a five 3.5” drive system, and the N3 was an eight-drive system. The N4, however, scales things back and arrives with six 3.5-inch SATA storage media bays.

Alongside these, we find two 2.5-inch SATA drive media bays. With the total storage separated in a grid of 4 + 4, this is a peculiar choice, as the use of 2.5-inch SATA SSDs has notably decreased in recent years. There’s a clear division in most storage circles: 3.5-inch SATA storage is used for low-priced, high-capacity storage, and M.2 NVMe SSD storage is chosen for high performance but low capacity. Given that the majority of modern motherboards these days come with at least one M.2 NVMe slot, traditionally used for an operating system SSD, the necessity of 2.5-inch SATA SSD bays in a 2024 NAS enclosure is up for debate!

The debate regarding the storage bays of the system is further exacerbated when you learn that only four of these bays support hot-swapping. Slots one, two, three, and four are all attached with a SATA/SAS backplane located at the rear of the enclosure.

Whereas, the other two 3.5-inch SATA and two 2.5-inch SATA are just empty physical cavities that will require the user to directly connect SATA cables from the motherboard, as well as introduce individual SATA power for each drive. The convenience of hot swapping without getting too up close and personal with the system components on the fly is a peculiar choice of storage deployment in a system released hot on the heels of the Jonsbo N2 and N3.

With the scale of the system’s physical width increased for its support of M-ITX motherboards, the N4 is similarly sized to the majority of other eight-bay NAS systems in the market. Yet, practically all other eight-bay NAS enclosures opt for traditional SATA trays that directly load onto a single 8-port internal backplane. It is an odd choice by the brand to opt for this style of drive insertion.

This is further exacerbated by Jonsbo’s continued decision to forgo the use of traditional storage media trays and instead opt for rubber handles and individual grommet drive screws for each physical drive. Not only does this mean that the installation of 2.5-inch SATA media in these larger bays requires an additional physical adapter, but the installation of the Jonsbo storage media drives with these handles has always felt clunky and poorly served when drives are being moved in and out of the system.

In Jonsbo’s defense, this approach is somewhat of a house style for the brand in many of their previous releases, and they do reduce operational vibration and noise compared to the insertion of metal trays. However, this decrease in drive vibration is somewhat minimal and arguably even less useful when using larger capacity or enterprise drives that are simply too mechanical and jam-packed with hardware to be suitably muted in operation anyway.

All in all, I find these rubber handles for drives reminiscent of something from the early 2000s of entry-level home server devices and feel completely out of place with the rest of the system’s arguably modern aesthetic.

Jonsbo N4 NAS Case Hardware Review – Internal

The Jonsbo N4 features three removable panels for accessing the bulk of the internal system framework. Additionally, several internal cavities/pathways guide cables between the installed motherboard and individual components. Given the relatively compact framework of the system, efficient cable management is paramount to prevent blocking active airflow. Although a bit of a tight fit, Jonsbo mostly pulls it off, albeit with a few questionable choices along the way.

The single 120mm fan is secured with four screws at each corner, and once removed, it allows for easy maintenance of the active cooling fan.

I find myself missing the dual-fan arrangement featured on the N3 model, especially since, short of a substantial CPU cooler, this is the only fan that can be installed in the system. There are no additional placement holes for optional fans.

The system has a PSU cavity that supports an SFX power supply, up to 125mm in height. An empty space above the PSU area is used for funneling cables from the front panel slots five through eight.

The rear fan area reveals four individual SATA connectors that require funneling additional SATA cables from, via either a fan-out cable or individually, into your chosen motherboard. The backplane is powered by a single Molex female input.

The front-mounted USB Type-A and USB Type-C ports connect to three individual F-panel connector cables that run directly behind the wooden section of the enclosure. The system lacks audio sockets and does not feature LEDs for the individual storage bays, presenting an understated case overall.

Removing the top panel is straightforward, done by unscrewing some screws at the rear of the enclosure. This reveals the space available for installing your ITX or MATX motherboard.

Screw points for mounting your motherboard are clearly identified with the letters M, I, or M/I – the latter indicating a shared screw point for either motherboard installation. The guidance holes for PSU power and SATA cabling are clear; however, it’s highly recommended to route these cables in advance of installing your motherboard as doing so afterward will be challenging.

This brings us to another area of the system that’s somewhat divisive. The height of the motherboard installation cavity is quite low, supporting only low-profile CPU coolers. While there are many impressive half-height CPU coolers available, and modern SOC processors often come with slim 1 to 2cm fan-assisted heatsinks, this limitation is notable.

Users often choose NAS cases that support MATX motherboards for the purpose of using more powerful CPUs, alongside the benefits of larger PCIe slots and more DIMM slots. This all necessitates more cooling, making the N4’s limited capacity for CPU coolers a bit puzzling.

Regarding MATX benefits, the system has slots for up to four individual PCIe cards. Realistically, most users will install one to two double-width cards. The system’s lower motherboard cavity height also means it only supports half-height PCIe cards, which should be fine for network interface cards or compact M.2 NVMe upgrade cards. However, modern graphics cards and larger PCIe upgrade cards will not fit.

Realistically, the majority of users interested in the Jonsbo N4 are likely looking for a system suited to multimedia, low to mid-level VM and container deployment, or simply to enhance their home lab. A smaller segment seeking to expand into AI, high graphical demands, or aggressive VM deployment might find the reduced PCIe card capacity limiting.

Jonsbo N4 NAS Case Hardware Review – Conclusion and Verdict

I like the Jonsbo N4 NAS Case, but there is no denying that for so many reasons the N3 is a superior NAS enclosure. Earlier this year when the N4 was first announced, we made a comparison guide on the N2, N3 and N4 (HERE) and reached the conclusion that the N4 was arguably the most niche unit of the series so far, making us wonder if perhaps Jonsbo had got these numbers in the wrong order! Fast forward to now and when we have spent some time with the N4 case and that opinion has not changed at all! The N4 IS a good NAS case, but in efforts to support MATX motherboard use, strange choices have been made in what to do with the increased dimensions afforded to the system.

The arrangement of the SATA storage bays is weirdly inconsistent, the decision to go for 6x 3.5″ and 2x 2.5″ (instead of just going ‘route 1’ and just opt for 8x 8.5″ SATA) is a stance choice in 2024 (as the focus on SSDs rapidly shifts away from 2.5″ to M.2 NVMe, onboard MoBos). The funnelling on cables on the system is very clear, the PCIe card frequency is high and the physical design and aesthetic appeal are better on the N4 than any other Jonsbo NAS case. But the reduced motherboard cavity space and it’s impact on optional rear fans, smaller CPU coolers and half-height PCIe cards is going to be a hurdle for more enterprising users! For under $100 (without delivery!), Jonsbo are still going to be the ‘go-to’ NAS case manufacturer in 2024 onwards, but the Jonsbo N4 is still a little more niche a proposal in terms of its physical appeal to a lot of users. A good DiY NAS Case, but make sure that you look into the N2 and N3 case first, as you might find more to love there!

N2

Best for Low/Efficient NAS Deployment

Lowest Price Point

Smallest Physical Footprint

Smallest Storage Capacity

Only 1 PCIe Card Slot and Half Height

N3

Best for  a Power NAS Build + Bigger CPU Cooling

Largest Storage Capacity + Full Size PCIe Cards

Best Prosumer Deployment

BIG Size and oddly tall

Noisiest System of the Three

N4

Better MoBo Compatibility (MITX and MATX)

Best Size vs Storage Option + 4x PCIe Slots

Most Conventially Aesthetically Appealing

Most Expensive

PCIe Cards Must Be Half Height

======= Where To Buy? =======
$76 (Check Aliexpress HERE) $99.42 (Check Aliexpress HERE) $76.99 (Check Aliexpress HERE)
$149 (Check Amazon HERE) $170 (Check Amazon HERE) $199* (Check Amazon HERE)

 

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕

       
      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      ASK YOUR QUESTIONS HERE!

      74 thoughts on “The Jonsbo N4 NAS Case Review

      1. There’s a lot of people complaining a lot about this case, forgetting that not everyone *needs* 8 hot swappable drives and full height/length PCI-E cards. I just did a build in one of these, and it’s perfect for my needs. I’ve gone with a mid-range CPU (Ryzen 5 5600G), 4 drives, and a couple of 2.5Gbe NICs. It’s been happily running my Proxmox VMs and TrueNAS for weeks. If they made something as big as the N3, it wouldn’t fit in the space where I have the N4.

        Jonsbo probably can and should update the N3 in the same style for those who do need the extra power and storage. I think the N2 and N3 look a little cheap personally, but there’s room for them to make options for everyone here. I am really impressed with the quality overall. I do kind of agree with your comments on drive mounting, but swapping drives is a very rare occurrence for me, so I’m okay with it.

        I will add that I have two very minor complaints about the N4:
        – The stock 120mm fan is a little louder than I’d like – not uncomfortably loud, but I probably will replace it in the future.
        – The PSU placement is pretty bad. This is my first build with a SFX PSU, and I was caught out by the short 24-pin ATX connector. I had to buy an extension for it to reach. Something to be aware of for anyone doing a build with the N4.
        REPLY ON YOUTUBE

      2. This layout actually sucks. The backplane is going to make it very difficult to install an Icy Dock if you want to run SSD only. Otherwise you could install 12 SSD’s into those 3.5″ slots.
        REPLY ON YOUTUBE

      3. This should have 8 drive supports full 3.5 and full 170 mm cpu cooler support. Then it could also fit full size gpus and order pci-e cards. Pci-e is the future of storage cards and other types of cards. Jonsbo really did a swing and miss here. Maybe a n6 will come that will fix it all?
        REPLY ON YOUTUBE

      4. Will this support sfx-l or just sfx psu’s? I’ve bought the case in the ali holiday celebration at 98 quid with delivery (which I feel is worth it for my needs) and looking for a PSU to pair with it. I see a really nice deal on an sfx-l but worry about fitting length in.
        REPLY ON YOUTUBE

      5. I thing showing off a plain old linux (ubuntu, fedora or anything, of course server flavour) with Cockpit would be nice. (there’s addon for smb/nfs, zfs and podman)
        REPLY ON YOUTUBE

      6. A Chinese netizen named “曝躁老鸽” launched a computer case named “Treasure寶藏盒” a long time ago.
        However, this “Jonsbo N4” product clearly plagiarizes his work.
        REPLY ON YOUTUBE

      7. A Chinese netizen named “曝躁老鸽” launched a computer case named “Treasure寶藏盒” a long time ago.
        However, this “Jonsbo N4” product clearly plagiarizes his work.
        REPLY ON YOUTUBE

      8. A Chinese netizen named “曝躁老鸽” launched a computer case named “Treasure寶藏盒” a long time ago.
        However, this “Jonsbo N4” product clearly plagiarizes his work.
        REPLY ON YOUTUBE

      9. A Chinese netizen named “曝躁老鸽” launched a computer case named “Treasure寶藏盒” a long time ago.
        However, this “Jonsbo N4” product clearly plagiarizes his work.
        REPLY ON YOUTUBE

      10. A Chinese netizen named “曝躁老鸽” launched a computer case named “Treasure寶藏盒” a long time ago.
        However, this “Jonsbo N4” product clearly plagiarizes his work.
        REPLY ON YOUTUBE

      11. Hello there, Im looking to get into the homlab community and build my own server.
        After a bit of research I came across a very interesting case that barely anybody in the YT homelab / NAS realm seems to be aware of.

        Im talking about the Aerocool Cipher mid tower case. There are only 2 videos about it on whole YT, despite it having space for 12 sata hdd’s and costs only around 80€.
        Maybe you find the time to take a look at it.
        REPLY ON YOUTUBE

      12. Id be interested in seeing how higher quality fans would make a difference in the cooling capability, like replacing that stock 120mm fan with a Phanteks T30, and adding an 60 or 80mm Noctua as an intake in the top right 2 3.5in drive bays (since there’s no SATA/SAS backplane there anyway) that would give cool air to both the PSU and bottom of the motherboard.

        You could mod fans into the top cover as well but then you’d have to deal with the cables every time you open it, unless you add some thin pieces of metal to mount the fans to
        REPLY ON YOUTUBE

      13. I’m getting Fractal Design Terra vibes. Maybe they’re hoping to pair the two things together? Although why Fractal and others don’t do their own, I’ll never know. And in an ideal world, why not do the Terra in a mid sized version as well, and do things like case with built in or modular area for a NAS so we can stop having unnecessary additional boxes everywhere.
        REPLY ON YOUTUBE

      14. Jonsbo N4 Mini feels more like a case that tries to be cheaper and more available “System 76” cases – but more into a “SFF PC with some media” instead of “Home Nas”

        Tho… honestly making a slim Video editing case… with ERYING Mobile CPU mobos.. or Intel Core “T” chip + low profile A380… could be a interesting thing to try

        and since it has already places for storage.. instead of making it a NAS, use SSD for OS and the SAS area for RAID storage which this video editing machine would be based on
        REPLY ON YOUTUBE

      15. Вот отличная видеокарта для этого корпуса GIGABYTE GeForce RTX 4060 OC Low Profile [GV-N4060OC-8GL], а остальные отсеки без Горячей замены из-за блока питания. Т.ч. это компромиссы. Лично для меня этот корпус то что мне нужно.
        REPLY ON YOUTUBE

      16. 10:12 – you dont need a base/side level vent because you should install the PSU upside down, so that it also helps the two HDDs and SSDs with cooling by sucking the air from the front of the case, passing through the HDDs/SSDs and exhausting it via the back, just like the 120 fan is doing it for the other half of the case
        REPLY ON YOUTUBE

      17. N4 is a stopgap solution for Jonsbo, Because most of these manufacturers have at least one product line support: MATX + SFX PSU + 6 to 8 bay.

        Even its design is nothing new, that wooden panel and half height PCIE design was there 3 years ago, looks cool and the cooling is actually bad
        REPLY ON YOUTUBE

      18. IMO this was a downgrade in comparison to the N3 simply because the N3 is a smaller case for Minit-ITX mobos, but it can fit 8 3.5″ drives into a backplane. And it’s not like they couldn’t simply maintain the 8 drive structure from the N3 and add the extra two spaces for 2.5″ drives. You can comfortably fit 10 drives in there if they go vertical like they are in the N2 and N3.
        REPLY ON YOUTUBE

      19. 0:38: ???? Review of the latest Jonsbo N4 NAS case highlighting its aesthetic design and potential software options.
        2:39: ⚙️ Analysis of storage bays and interfaces in Jonsbo N4 NAS Case.
        4:44: ⚙️ Limitations of GPU and storage card compatibility in Jonsbo N4 NAS Case.
        7:42: ⚙️ Limitations in cooling capabilities of the M ATX case may hinder performance potential.
        9:43: ⚠️ Challenges with PSU placement and airflow in the Jonsbo N4 NAS Case.

        Timestamps by Tammy AI
        REPLY ON YOUTUBE

      20. While you’re points are valid, for most use cases it won’t matter. NAS only can be run by a dual core and a low height cooler. mATX typically has 2 nvme. You can add a dual or quad low height nvme card(s). If you are going to run it as more of a server then a NAS, all of that above still applies as most Homelab server builds are typically running the CPU at 50% or less most of the time. If you have an Intel chip, you can use the iGPU for transcoding. So, while this case could be improved, I wouldn’t let any of this stop you if you need mATX. Cooling for the drives may be an issue depending on your environment but you can put a fan or two above the PSU.
        REPLY ON YOUTUBE

      21. Some really sus design choices for an otherwise good case. Ideas for the eventual N5 case: Clone the left side of the hard drive compartment to the right, but make the second backplane an optional upsell if you’re that concerned about cost Jonsbo. Keep the Micro-Atx mobo compatibility but allow for full height/length add-on cards and use the required increase in compartment space to include a pair 120mm fan mounts on one side. Ditch the rubber bands for actual drive sleds (even stamped sheet metal would be an improvement). Because at $142.31 (shipping included and a 25% off base price discount) you’re approaching Silverstone territory (CS380 ($239.99)/CS382($249.99)) price-wise. As it stands with the N4 the juice (money saved vs SST) is not worth the squeeze.
        REPLY ON YOUTUBE

      22. I hope the 8 bay Ugreen works out. If they lock it down super hard between now and May so I’d be forced to use their shitty software, I think I can cancel the pledge.

        All Jonsbo needs to do is release a bigger Jonsbo N3 with 120/140mm rear fan(s), drive trays that don’t suck, 8 bays, etc.
        REPLY ON YOUTUBE

      23. You’re just set on it being some top of the line power system and the whole review is about how it’s not something else, including the rubbers that are great for a design ‘not too huge living room piece’ 🙂
        REPLY ON YOUTUBE

      24. This actually is great for my use case, but I just can’t justify spending about $200 for what amounts to just a case swap. I know most of that is just shipping to the states but still, it’s mostly just a (very nice) cosmetic upgrade to what I’m using now.
        REPLY ON YOUTUBE

      25. The N4 looks pretty but its performance is worse then N3 my favourite still is the N2 after modding you can install a thicker fun on the back and SSD cage on the side after removing the hex key.
        REPLY ON YOUTUBE

      26. This box design is quite schtewpid, innit ?

        I don’t see why would anyone choose this case over a N3. MATX support is useless if you can’t fit large cards, just stick with ITX.

        I think a Define R6 (or XL if you need more drives) is cheaper and you can slightly mod it to fit a SAS backplane with the proper SFF connectors.
        REPLY ON YOUTUBE

      27. Another great presentation on a NAS case, well done and thank you for all your videos. Personally, I would like to see an Unraid installation on this Jonsbo N4 case. I have watched many of your presentations and was seriously considering the Jonsbo N3 case for my NAS solution. However, delivery delays and the PSU being a 1U limitation meant that the SFX PSU I already had available could not be used. In the end I plumbed for a Silverstone CS380, with my Corsair 850 FSX PSU, ASUS micro ATX motherboard, 16 Gbyte DDR4, AMD Ryzen 5 5600G with on board graphics and a low profile Noctua cooling fan I had as a spare. Twin 2.5 G ethernet ports and a 8 port SATA card in the PCIe slots. I used Unraid as it was the only one to support different disc sizes in the storage pool and has ZFS, so storage wise 18 Tb parity disc, 18 Tb, 16 TB and two 6 TB HDD, two 2Tb NVMe drives, One 2TB SSD Cache pool, one 2TB SSD RAID 1 cache pool. So, I would love to see how this N4 setup compares with my CS380 NAS using using Unraid, different HDD sized discs in the storage pool with ZFS and maybe multiple cache pools with the NVMe slots. I will be intereseted to know what the cabling is like to get maximum use out of the available slots.
        REPLY ON YOUTUBE

      28. I just built mine with a Audheid K7 8 bay, cheap but I like the drive bays, and aesthetics. Sharp edges, light weight, cooling options could be improved, but over all, I liked the 1u flex power supply, as I purchased a eco bronze efficiency PS.
        As my other server is an older dual Xeon 600watt dual power sully, that can double as a space heater, even at idle.
        This one can run 24-7, at 75watts idle before the 8 drives spin down to standby.
        I was looking for an ATX option before deciding on the eco option.
        REPLY ON YOUTUBE

      29. I own this case. Some issues are: My 24-pin atx cable from my Corsair SF750 is slightly too short to make the run on the w680ace mobo. The aforementioned 4-bay hotswap instead of 6 is not the end of the world. Half-height cards aren’t the end of the world either. The good thing about this case is it looks amazing. 12600k CPU temps with the Noctua L12S (Low profile mode) are great, I have only seen it go to 44 degrees under load. 4 8 TB drives only stay around 41-44 degrees with Noctua fans at 840rpm. I’d say it’s a good chassis if you don’t mind the small footprint and only 4 hot swaps.
        REPLY ON YOUTUBE

      30. I’m almost positive I saw a a full NAS advertised that used that same case! I bet they made it for somebody and decided that since they had all the tooling set up they might as well release it under there own name.
        REPLY ON YOUTUBE

      31. They just copied another Chinese NAS case called the “Treasure Box”, which has eight 3.5inch bays and MATX motherboard.

        The Jonsbo NAS cases are really not that great, and not priced competitively. There is another case called the “Sagittarius”, also eight hotswap 3.5inch bays and MATX and retails for CN¥349 which is about US$48.
        REPLY ON YOUTUBE

      32. i watch other video and it has backplane on each 4 bays. you can search this video ” Finalizing my NAS build based on the 9-bay Chinese motherboard and case ”
        REPLY ON YOUTUBE

      33. i got so excited for a moment thinking that the n4 had space for more 3.5″ drives than the n3. I’ve been waiting for a bigger n3 for a while now and i’m so close to pulling the gun on a node 804 instead
        REPLY ON YOUTUBE

      34. Oh god, if I try to buy this case I’ll get it end of May…. And it’s 170 Dollars with the delivery to boot. It’s a beautiful case, but I’ll pass. Do try to make a OMV machine with it, should be fun.
        REPLY ON YOUTUBE

      35. Oo I love the smell of cooking components. 1 fan off centre for the hard disks and nothing for mobo or graphics card.. would be very interested to note temps on this…
        REPLY ON YOUTUBE