FULL List Of PS5 Compatible SSDs & Heatsinks In 2022

FULL Current PS5 Compatible SSDs to Upgrade Your Storage

Please find below the full list of SSDs that have been tested/mid-testing for PS5. If the official/inclusive heatsink from the brand (eg the WD Black SN850 and its in-house SSD heatsink) fit inside the PS5 SSD expansion slot comfortably, it will be highlighted as such. Additionally, the nature of the driveā€™s current confirmation of support will be updated below as appropriate. Since this PS5 SSD Storage update beta was released by Sony, many of the well known SSDs have gone out of stock but will be restocked shortly. Additionally, I strongly recommend using the links in the table to check stock availability. You donā€™t have to buy them, but it will give you a better understanding of what SSDs are available, pre-order or even on offer. Links are affiliated and any purchases made will result in a small commission heading back to this site. Letā€™s take a look below to see which SSDs are compatible with PS5 right now. If you are considering a particular SSD brand for your PS5 SSD upgrade and want to see video testing of that SSD in the PS5 system on my YouTube channel, click one of the logos below to be taken to the full list of video tests (currently spanning over 30 top tier games, as well as numerous direct SSD comparisons and Heatink tests):

SSD Tests on YouTube

(Click the Brand Logo to see the full Video Testing)

All PS5 Compatible SSDs in 2021/2022 ā€“ UPDATED

Although Sony enabled the Playstation 5 SSD expansion slot in Summer 2021, they have yet to issue a FULL compatibility list of ALL drives that can be used. I have been testing a huge number of M.2 NVMe SSDs with PS5 in the last 6 months in order to create a master list of all the drives that work (here on the blog, as well as over on YouTube in my PS5 SSD Test Series HERE). Below is a breakdown of all the currently available and supported SSDs that are compatible with PS5 (with help on Reddit, Twitter and others).

BLUE = COMPATIBLE

GREY = UNCONFIRMED

BRAND MODEL ID SIZES CONTROLLER NAND R/W SPEED CHECK AMAZON
Acer Predator GM7000 512, 1TB, 2TB Innogrit 1G5236 Micron3D TLC 7,400 / 6,700 MB/s
ADATA XPG Gammix S70 Blade 1TB, 2TB Innogrit IG5236 3D Nand 7.4K / 6.4K MB/s
ADATA XPG Gammix S70 1TB, 2TB Innogrit Rainer IG5236 Micron 3D TLC 7.4K / 6.4K MB/s
ADATA XPG Gammix S50 Lite 1TB, 2TB Silicon MotionSM22 67 Micron 3D TLC 3.9K / 3.2K MB/s
ADATA XPG Gammix S50 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Addlink A95 1TB, 2TB Phison PS5018-E18 Micron3D TLC 7.1K /6.8K MB/s
Addlink A92 1TB, 2TB, 4TB Phison PS5016-E16 Micron QLC 4.9K / 3.6K MB/s
Addlink A90 1TB, 2TB N/A 3D TLC 5.0K / 4.4K MB/s
Addlink H90 with heatsink 1TB, 2TB N/AĀ  3D TLC 5.0K / 4,4K MB/s
Addlink S90 no heatsink 1TB, 2TB N/A 3D TLC 5.0K / 4,4K MB/s
Apacer AS2280Q4 500, 1TB, 2TB Phison PS5016-E16 3D TLC 5.0K / 4.4K MB/s
Asgard AN4 512, 1TB, 2TB Innogrit IG5236 YNTC 3D TLC 7.5K / 5.5K MB/s
Corsair MP600 Pro XT Hydro X 2TB, 4TB Phison PS5018-E18 Micron3D TLC 7.1K / 6.8K MB/s
Corsair MP600 Pro XT 1TB, 2TB, 4TB Phison PS5018-E18 Micron3D TLC 7.1K / 6.8K MB/s
Corsair MP600 Pro Hydro X 2TB Phison PS5018-E18-41 3D TLC 7.0K / 6.55K MB/s
Corsair MP600 Pro Standard 1TB, 2TB, 4TB Phison PS5018-E18-41 Micron3D TLC 7.0K / 6.55K MB/s
Corsair MP600 Core 1TB, 2TB, 4TB Phison PS5016-E16 3D QLC 4.95K / 3.95K MB/s
Corsair MP600 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 4.95K / 4.25K MB/s
Crucial P5 Plus 500, 1TB, 2TB Crucial NVMe Micron TLC 6.6K / 5.0K MB/s
Galax HOF Pro 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Gigabyte Aorus 7000S 1TB, 2TB Phison E18 Micron TLC 7.0K / 6.85K MB/s
Gigabyte Aorus 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.0K MB/S
Goodram IRDM Ultimate X 500, 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0 / 4.5K MB/s
Inland Performance Plus 1TB, 2TB Phison PS5018-E18 Micron3D TLC 7.0 / 6.85 GB/s
Integral Ultima Pro X3 500, 1TB, 2TB N/AĀ  3D TLC 5.0 / 4,4K MB/s
Intel DC P5800X 400, 800, 1.6TB Intel InteL Optane 2nd Gen 7.4 GB/s / 7.4
Kingmax PX4480 500, 1TB, 2TB Phison PS5016-E16 3D Nand 5.0 / 4.4K MB/s
Klevv CRAS C920 1TB, 2TB Phison PS5018-E18 3D TLC 7.0K / 7.0K MB/s
Lexar NM800 500, 1,000 GB InnoGrit IG5236 3D TLC 5.8K / 7.4K MB/s
Micron 3400 512, 1TB, 2TB Micron Based Micron 3D TLC N/AĀ 
Micron 2450 256, 512, 1TB N/A Micron 3D TLC N/AĀ 
MSI Spatium M480 500, 1TB, 2TB PhisonPS5018-E18 Micron 3D TLC 7.0K /6.85K MB/s
MSI Spatium M470 1TB, 2TB Phison PS5016-E16 Kioxia 3D TLC 5.0K / 4.4K MB/s
Mushkin Gamma 1TB, 2TB Phison PS5018 E18 Micron 3D TLC 7.1 / 6.8 MB/s
Mushkin Delta 1TB, 2TB, 4TB Phison PS5016-E16 Micron 3D TLC 4.9 / 3.9 MB/s
Patriot Viper VP4300 1TB, 2TB Innogrit Rainier IG5236 Micron 3D TLC 7.4K / 6.8K MB/s
Patriot Viper VP4100 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Plextor M10P Series 512, 1TB, 2TB Innogrit Rainier IG5236 Kioxia TLC 7.0K / 5.0K MB/s
PNY XLR8 CS3140 1TB, 2TB Phison PS5016-E18-41 Micron 3D TLC 7.5K / 6.85K MB/s
PNY XLR8 CS3040 500GB, 1TB, 2TB Phison PS5016-E16-32 Toshiba 3D TLC 5.6K / 4.3K MB/s
Sabrent Rocket 4 Plus 500, 1TB, 2TB, 4TB Phison PS5018-E18 Micron 3D TLC 7.2K / 6.9K MB/s
Sabrent Rocket Q4 1TB, 2TB, 4TB Phison PS5016-E16 Micron 96L QLC 4.9K / 6.85K MB/s
Sabrent Rocket NVMe 4.0 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Samsung PA9A1 (OEM) 250, 500, 1TB, 2TB Samsung Elpis Samsung 3D TLC 7.0K / 5.2K MB/s
Samsung 980 Pro 250, 500, 1TB, 2TB Samsung Elpis Samsung 3D TLC 7.0K / 5.0K MB/s
Seagate FireCuda 530 500, 1TB, 2TB, 4TB Phison PS5018-E18 Micron 3D TLC 7.0K / 6.9K MB/s
Seagate FireCuda 520
1TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Seagate FireCuda 520 500, 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Silicon Power US70 1TB, 2TB Phison PS5016-E16 3D Nand 5.0K / 4.4K MB/s
Smartbuy Stream E19T 500, 1TB Phison PS5016-E19-35 Toshiba 3D TLC 3.3K / 3.0K MB/s
Smartbuy Impact E16 500, 1TB, 2TB Phison PS5016-E16 3D TLC 5.0K / 4.4K MB/s
Team Force Cardea Z44Q 2TB, 4TB Phison PS5012-E161 Micron 3D QLC 5.0K /4.0K MB/s
Team Force T Create Classic 1TB, 2TB Phison PS5016-E16 Kioxia 3D TLC 5.0K / 4.4K MB/s
Team Force Cardea Ceramic A440 1TB, 2TB Phison PS5086-E18 Micron TLC 7.0K / 6.9K MB/s
Team Force Cardea Ceramic C440 1TB, 2TB Phison PS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Team Force Cardea Zero Z440 256, 512, 1TB PhisonPS5016-E16 Toshiba 3D TLC 5.0K / 4.4K MB/s
Transcend MTE240S 512, 1TB N/A 3D TLC 3.8K / 3.2K MB/s
Western Digital Black SN850 500, 1TB, 2TB SanDisk 8-Channel 96L Bics4 7.0K / 5.1K MB/s

 

What is the Best PS5 SSD Heatsink ā€“Ā The Doā€™s and Donā€™ts

Most M.2 NVMe SSD that you might look at for your PS5 will NOT arrive with a heatsink. Some brands do include optional heatsinks for $20-40, but there will likely be PC-Grade gamer heatsinks and much, much too tall for the allocated PS5 Expansion storage slot for upgrades. Sony provided a handy upgrade guide for how big the NVMe SSD needs to be, alongside details of the type that is recommended.

Now, there are ALOT of M.2 NVMe SSD Heatsinks on the market ā€“ THOUSANDS! So it is important to know which ones are compatible and which ones you should completely avoid. Heatsink AND SSD together should NOT exceed in millimeters 110mm (L) x 25mm (W) x 11.25mm (H) and in inches 4.33in (L) x 0.984 in (W) x 0.442in (H). Another big thing to remember is that some SSD heatsinks use rubber bands to hold the M.2 NVMe SSD and the HEATSINK together. I would strongly recommend avoiding these kinds of heatsinks as they have a tendency not to last vast amounts of time and the silicon rubber bands (if produced poorly) can wear away. I strongly recommend a met surrounding heatsink case/enclosure like the one below, as it has 2 layers of internal thermal padding, the metal surrounding the whole SSD (assisting heat dissipation) and is screwed in place. Last point. The majority of NVMe M.2 PCIe Gen 4Ɨ4 SSDs right now are going to be 2280 (that is the length of the SSD), as this tier of SSD have only JUST been released in the last 6-9 months. However, they WILL get longer (to accommodate more storage cells and bigger capacity) so the fact the PS5 supports up to 22110 lengths SSDs is quite handy. If you are reading this guide much later in 2021/2022, then DO CHECK that the SSDĀ  you are installing in your PS5 is 2280 or 22110, as the heatsink will also need to be this length too (as the screw holds an SSD Board mount need to match). This is much, MUCH less of a concern in 2021 however, so you can ignore this right now. So,Ā  there you have it, those are the doā€™s and donā€™ts for buying a heatsink for your PS5 SSD upgrade. Below are 5 great examples of M.2 NVMe SSD Heatsinks that will fit in your PS5 Expansion slot. They vary in price, design, height, colour and density. Take a look:

 

 

UPDATED ā€“ The Recommended Ones Below Keep Selling out, so I have added more!

Sabrent PS5 SSD Designed Heatsink ā€“ $19.99

  • DESIGNED FOR PS5: Engineered to fit perfectly and easily into the PS5 SSD expansion slot. The installation has never been easier on the PS5
  • REVOLUTIONARY COOLING: Made from High-Quality CNCā€™d aluminium, the Sabrent PS5 Heatsink was specifically designed to maximize cooling performance and simplify the installation
  • UPGRADE YOUR PS5! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 cover. This allows for better cooling using the native fan as well as being a larger heatsink
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrentā€™s ā€œSandwich Designā€ which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation

ElecGear PS5 SSD Designed Heatsink ā€“ $34.99

  • [PS5 NVMe Heatsink] ā€“ The patent-pending cooler is exclusively designed for PlayStation 5 internal NVMe SSD. It features a heat pipe and a huge solid aluminum heatsink. The high performance comes from the numerous cooling fins and the delicate utilization of air circulation sucked by PS5 main cooling fan. The streamlined profile is a snag fit with the middle frame of PS5 chassis. The heatsink is the ultimate cooling solution to the heat management of extreme Gen4 gaming SSD
  • [Heat Pipe and Thermal Pads] ā€“ A 5mm heatpipe seamlessly embedded in the lower aluminum deck. The passive design with no cooling fan is aiming for being totally silent. The heat produced by SSD will be absorbed by the heat pipe and effectively conducted to the extensive aluminum fins. Two pieces pre-divided thermal pads are included for excellent heat connection. 0.8mm and 1.5mm thickness option adapts to any PCIe NVMe M.2 SSD
  • [Improved Mounting Post] ā€“ It seems the leading maker Sony does not belong to M.2 SSD industry. We donā€™t think that the stock screws mount M.2 SSD appropriately in the memory compartment. ElecGear did it better with a re-designed fixing structure for your gaming SSD. The modified guide post, standard M.2 screw and even a copper washer to adjust the height of SSD are included in the box
  • [Compatibility Note] ā€“ The cooler fits both PS5 Ultra HD and Digital editions. In terms of hardware, itā€™s compatible with any standard NVMe M.2 solid state drive. Fully tested with WD Black SN850, Samsung 980 Pro and Sabrent Rocket NVMe 4.0. It supports 2230, 2242, 2260, 2280 form factor and also works with 22110 in the future. Please be noticed: The SSD makerā€™s thin heatsink should be removed before installing, for example, Corsair-Force MP600 and ADATA XPG

 

PNY XLR8 Gaming PS5 SSD Designed Heatsink ā€“ $24.99

PNY XLR8 PS5 SSD Heatsink is designed for PS5, integrating the original PS5 SSD cover, PNY offers a brilliant design, combined the cover with heatsink which provides extreme cooling performance, taking your extra upgraded PS5 NVMe SSD to the extreme. Not only can you destroy the competition, and play more games, but your system can look good while doing so.

  • Part No : M22110PSVHS-XR-RB
  • Design to integrate PS5 SSD cover & heatsink
  • Greatly improves cooling efficiency
  • Included spare screws x1 + Thermal pads
  • Compare to no heatsink, cools downs the SSD over 40%*
  • Recommended SSD:Ā XLR8 CS3140 Gen 4Ɨ4

INEO / GRAUGEAR PS5 SSD Designed Heatsink G-PS5HS01 ā€“ $34.99

The new GRAUGEAR/INEO heat pipe cooler G-PS5HS01 reduces the temperature of your M.2 NVMe SSDs in the PlayStationĀ®5 by up to 50% and thus contributes to a longer lifetime of your SSDs. The performance of your M.2 NVMe SSDs is also positively influenced by the GRAUGEAR/INEO heat pipe cooler G-PS5HS01. The Ƙ7mm copper heat pipe and the copper fins and aluminium heat sink ensure maximum performance.

  • Heat Pipe from Copper maximum performance
  • The reduced temperature of M.2 NVMe SSD up to 50%
  • Designed for PlayStationĀ®5
  • Compatible with Single/Double-sided M.2 2280 SSDs
  • 1 x G-PS5HS01, 4 x Thermal Pads
  • 1 x Screwdriver1 x SSD mounting screw
  • 1x Screws, 1 x Manual, 1 x Warranty card

 

QIVYNSRY M.2 heatsink 2280 SSD Double-Sided Heat Sink

  • Designed for desktop computers, but works with PS5
  • Aluminum body, Anodic Oxidation Surface Treatment;
  • with 10Ā°C ā€“ 30Ā°C cooling effect;
  • Compatible with Singel/Double sided M.2 NVME NGFF SSD;
  • Easy to install, and not damage the hard disk.

Includes:

  • 1* EZ NVMe Heatsink-Silver
  • 2* Thermal pads
  • 5* Screws.
  • 1* Installation guide.

 

 

SUPER BUDGET OPTION ā€“ Akuoly M.2 SSD Heatsink 4 Pack Aluminum Heatsink Cooler Cooling

 

  • To Save Your Device from Fail Prematurelyā€“Reduce the risk of hardware failure due to overheating. The gap of these Akuoly heatsinks between the larger fins increases the area of the board and thus provides for greater heat transfer
  • Made of High Quality Aluminumā€“Made of high quality aluminum, great thermal conductivity. An aluminum heatsink is a passive heat exchanger that efficiently transfers heat through electronic signal or mechanical signal with device, thus keeping a regulation of the temperature of the device at an optimal level
  • Suitable for Various Devicesā€“Suitable for heating elements on Wi-Fi routers, M.2 SSD, AC adapters, chargers, high power amplifier transistor semiconductor devices and so on
  • Cheerful 4 Pack Heatsink & Thermal Padsā€“Ā 4 pieces x aluminum heatsink Cooling Fin (each 70mm x 22mm x 6mm), large surface area and great fins; with 4 pieces of double-sided thermal tape whose thermal conductivity: about 1.3 W / (mĀ·K).
  • Material:Ā Aluminum
  • Size:Ā 70mm (L) x 22mm (W) x 6mm (H)
  • Package:Ā 4 Pack x Aluminum Heatsink Cooling Fins
  • 4 Pieces Double-sides Thermal TapeĀ whose thermal conductivity: about 1.3 W / (mĀ·K).

 

SGTKJSJS M.2 Heatsink SSD Cooler for PCIE NVME

Excellent little kit. Comes with: A screwdriver, a cleaning and drying towelette(not needed if the m.2 is new and/or not dusty) and it has two dark blue(.5mm) for the bottom(U bracket) and two light blue(1mm) for the top(heatsink) for 2 m.2 drives. There is a protective film on BOTH sides of each of the thermal tape piece. Remove BOTH pieces of film of EACH of the thermal tape pieces and apply them. Once the thermal tape is on both sides(1 blue-bottom, 1 light blue-heatsink) place the bottom of your m.2 drive into the U bracket/bottom of the thermal unit. Next make sure that the top piece(heatsink) has the open spot for the screw for your motherboard facing the back to leave space to attach. Next, line up the holes and gently drop the top heatsink into the U bracket/bottom.

Package list

ā€“ M.2 SSD heatSinkĀ  X2

ā€“ Silicone thermal padĀ Ā  X4

ā€“ Fixing screwĀ  X8

ā€“ screwdriverĀ  X1

 

EZDIY-FAB M.2 2280 SSD heatsink

Double-Sided Heat Sink, High-Performance SSD Cooler for PCIE NVME M.2 SSD or SATA M.2 SSD- Red or Black ā€“ $15

  • Designed for desktop computers, but works inside PS5
  • Aluminum material for best heat dissipation and maximum performance.
  • Compatible with Singel/Double sided M.2 2280 SSDs.
  • Easy to install.
  • Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape.

Includes:

  • 1* EZ NVMe Heatsink-Silver
  • 2* Thermal pads
  • 5* Screws.
  • 1* Installation guide.

 

 


MHQJRH M.2 2280 SSD heatsink ā€“ SINGLE SIDE SSD USE ONLY ā€“ VERY TIGHT FIT!!

Double-Sided Heat Sink, Matching Thermal Silicone pad for PCIE NVME M.2 SSD or SATA M.2 SSD ā€“ $9.99

  • Designed for Compact M.2 NVMe SSD Installation
  • Aluminum body, Anodic Oxidation Surface Treatment.
  • Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10Ā°C ā€“ 30Ā°C cooling effect.
  • Compatible with Singel/Double-sided M.2 2280 SSDs.
  • Easy to install, and not damage the SSD
  • Advancing Gene thermal pad is made from Nano Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD label.

Includes:

  • M.2 SSD heatSink X1
  • Silicone thermal pad X3
  • Fixing screw X6
  • Screwdriver X1

 

 


 

Ice Cold Ineo M.2 heatsink 2280 SSD

Thermal Silicone pad for M.2 PCIE NVMe SSD ā€“ $10.99

  • The NVMe heatsink are able to support the NVMe SSD type 70x20mm
  • Please place the silicone cooling pad between the heatsink and the SSD to prevent damage to the SSD and protect the particles of the SSD, which can effectively extend the life of your SSD.
  • Package including: 1 NVMe Aluminum heatsink, 2 silicone thermal pad, 1 user manual, 1 screw driver , 1 guarantee card, 1 screw
  • Each product has strict tested before We sent it to you and offer 1 Year Limited Warranty, Life-time free technical support by ineo.

Includes:

  • 1 NVMe Aluminum heatsink
  • 2 silicone thermal pad
  • 1 user manual
  • 1 screw driver
  • 1 1 screw

 


 

WARSHIP Pro M.2 2280 SSD Heatsink

PCIE NVME or SATA m2 2280 SSD Double-Sided Heat Sink ā€“ Black ā€“ $8.99

  • Suports PCIE NVME M.2 2280 size SSD or SATA M2 2280 size SSD
  • Aluminium alloy, silver plating , anodic oxidation surface treatment
  • Easy to install, NO damage to the SSD.
  • Aluminum alloy-Groove design with 10Ā°C ā€“ 30Ā°C cooling effect

Includes:

  • HeatSink X2
  • Big Silicone thermal pad X 2
  • Small Silicone thermal pad X 10
  • Screws X 6
  • Screwdriver X1

 

 


 

Best Budget Choice ā€“ Nankui SSD Heatsink Surround ā€“ SINGLE SIDE SSD USE ONLY ā€“ VERY TIGHT FIT!!

NVMe Heatsink for m.2 2280 SSD,Double-Sided Cooling ā€“ $5.99

  • Originally designed for desktop computers, This M.2 SSD heatsink compatible with all single sided Type.
  • Simple Lock design, easy to install
  • Double Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 7Ā°C ā€“ 30Ā°C cooling effect (Varies depending on the environments), Ensure the high-speed and long-lasting performance of SSD, continuous high-speed reading and writing and long-term game performance are still strong
  • Main body material: Aluminum alloy, anodic oxidation surface treatment. Dimensions: 76.5*24.*12mm , Nano Silicon Grease Material Dimensionsļ¼š70*20*T.4 ļ¼ŒThermal conductivityļ¼š3W/m-k

Includes:

  • M.2 SSD heatSink X1
  • Silicone thermal pad X3
  • No Screws ā€“ Clicks Shut

 

 

 

How Do the Six Most Popular PS5 SSDs Compare?

Many users will choose one of the first 6-7 SSDs in the above list, as these are the most commonly available, recommended by performance or best price per GB/TB. However not all M.2 NVMe SSDs are created equally and in the case of PS5 compatible SSDs, there is actually a wide range of performance benchmarks to choose between, maximum/minmum capacities to choose from and a variety of endurance and handling specifications that make each of the more mainstream compatible PS5 supported SSDs quite distinct. Below is a breakdown of how they compare. The choices below are the Seagate Firecuda 530, the WD Black SN850, the Samsung 980 PRO, the Sabrent Rocket 4 Plus, the MSI SPATIUM M480 and the Gigabyte Aorus 7000s.

SSD Architecture and Specifications

Brand/Series Seagate Firecuda 530 WD Black SN850 Samsung 980 Pro Sabrent Rocket Plus MSI SPATIUM M480 AORUS Gen4 7000s
PCIe Generation PCIe Gen 4 PCIe Gen 4 PCIe Gen 4 PCIe Gen 4 PCIe Gen 4 PCIe Gen 4
NVMe Rev NVMe 1.4 NVMe 1.4 NVMe 1.3c NVMe 1.4 NVMe 1.4 NVMe 1.4
NAND 3D TLC Micron B47R 176L BiCS4 96L TLC 3D TLC B27 3D NAND 96L B27 3D NAND 96L B27 3D NAND 96L
Max Capacity 4TB ā€“ Double Sided 2TB 2TB 4TB Double Sided 2TB 2TB
Controller Phison E18-PS5018 WD_BLACK G2 Custom Elpis Phison E18-PS5018 Phison E18-PS5018 Phison E18-PS5018
Warranty 5yr 5yr 5yr 5yr 5yr 5yr

SSD Price Comparison

Brand/Series Seagate Firecuda 530 WD Black SN850 Samsung 980 Pro Sabrent Rocket Plus MSI SPATIUM M480 AORUS Gen4 7000s
500GB Model ZP500GM3A013 WDS500G1X0E-00AFY0 MZ-V8P500BW Ā  M480-500GB Ā 
Price in $ and $ $139 / Ā£119 $119 / Ā£99 $119 / Ā£109 Ā  $119 / Ā£105 (TBC) Ā 
1TB Model ZP1000GM3A013 WDS100T1X0E-00AFY0 MZ-V8P1T0BW SB-RKT4P-1TB M480-1000GB GP-AG70S1TB
Price in $ and $ $239 / Ā£199 $249 / Ā£169 $209 / Ā£179 $199 / Ā£180 $239 / Ā£189 (TBC) $199 / Ā£189
2TB Model ZP2000GM3A013 WDS200T1X0E-00AFY0 MZ-V8P2T0BW SB-RKT4P-2TB M480-2000GB GP-AG70S2TB
Price in $ and $ $419 / Ā£379 $399 / Ā£339 $390 / Ā£369 $469 / Ā£419 $399 / Ā£369 (TBC) $359 / Ā£399
4TB Model ZP4000GM3A013 Ā  N/A SB-RKT4P-4TB N/A N/A
Price in $ and $ $949 / Ā£769 N/A N/A $1099 / Ā£999 Ā 

SSD Performance Comparison

Brand/Series Seagate Firecuda 530 WD Black SN850 Samsung 980 Pro Sabrent Rocket 4 Plus MSI SPATIUM M480 AORUS Gen4 7000s
500GB Model ZP500GM3A013 WDS500G1X0E-00AFY0 MZ-V8P500BW N/A M480-500GB N/A
Sequential Read (Max, MB/s), 128 KB 7000MB 7000MB 6900MB Ā  6500MB Ā 
Sequential Write (Max, MB/s), 128 KB 3000MB 4100MB 5000MB Ā  2850MB Ā 
1TB Model ZP1000GM3A013 WDS100T1X0E-00AFY0 MZ-V8P1T0BW SB-RKT4P-1TB M480-1000GB GP-AG70S1TB
Sequential Read (Max, MB/s), 128 KB 7300MB 7000MB 7000MB 7000MB 7000MB 7000MB
Sequential Write (Max, MB/s), 128 KB 6000MB 5300MB 5000MB 5500MB 5500MB 5500MB
2TB Model ZP2000GM3A013 WDS200T1X0E-00AFY0 MZ-V8P2T0BW SB-RKT4P-2TB M480-2000GB GP-AG70S2TB
Sequential Read (Max, MB/s), 128 KB 7300MB 7000MB 7000MB 7100MB 7000MB 7000MB
Sequential Write (Max, MB/s), 128 KB 6900MB 5100MB 5100MB 6850MB 6850MB 6850MB
4TB Model ZP4000GM3A013 Ā  N/A SB-RKT4P-4TB N/A N/A
Sequential Read (Max, MB/s), 128 KB 7300MB N/A N/A 7100MB Ā  Ā 
Sequential Write (Max, MB/s), 128 KB 6900MB N/A N/A 6850MB Ā 

SSD Endurance Comparion

Brand/Series Seagate Firecuda 530 WD Black SN850 Samsung 980 Pro Sabrent Rocket Plus MSI SPATIUM M480 AORUS Gen4 7000s
500GB Model ZP500GM3A013 WDS500G1X0E-00AFY0 MZ-V8P500BW Ā  M480-500GB N/A
Total Terabytes Written (TBW) 640TB 300TB 300TB Ā  350TB Ā 
Mean Time Between Failures (MTBF, hours) 1,800,000 1,750,000 1,500,000 Ā  1,600,000 Ā 
DWPD 0.7DWPD 0.3DWPD 0.3DWPD Ā  0.38DWPD Ā 
1TB Model ZP1000GM3A013 WDS100T1X0E-00AFY0 MZ-V8P1T0BW SB-RKT4P-1TB M480-1000GB GP-AG70S1TB
Total Terabytes Written (TBW) 1275TB 600TB 600TB 700TB 700TB 700TB
Mean Time Between Failures (MTBF, hours) 1,800,000 1,750,000 1,500,000 1600000 1,600,000 1,600,000
DWPD 0.7DWPD 0.3DWPD 0.3DWPD 0.4DWPD 0.38DWPD 0.38DWPD
2TB Model ZP2000GM3A013 WDS200T1X0E-00AFY0 MZ-V8P2T0BW SB-RKT4P-2TB M480-2000GB GP-AG70S2TB
Total Terabytes Written (TBW) 2550TB 1200TB 1200TB 1400TB 1400TB 1400TB
Mean Time Between Failures (MTBF, hours) 1,800,000 1,750,000 1,500,000 1600000 1,600,000 1,600,000
DWPD 0.7DWPD 0.3DWPD 0.3DWPD 0.38DWPD 0.38DWPD 0.38DWPD
4TB Model ZP4000GM3A013 Ā  N/A SB-RKT4P-4TB N/A N/A
Total Terabytes Written (TBW) 5100TB N/A N/A 3000TB Ā  Ā 
Mean Time Between Failures (MTBF, hours) 1,800,000 N/A N/A 1600000 Ā  Ā 
DWPD 0.7DWPD N/A 0.3DWPD 0.4DWPD Ā 

 

šŸ“§ SUBSCRIBE TO OUR NEWSLETTER šŸ””


    šŸ”’ Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? šŸ“§ Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally,Ā for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      šŸ”’Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ā˜• Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
      Ā Ā Ā Ā 
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ā˜• WE LOVE COFFEE ā˜•

       

       

      locked content ko-fi subscribe