Jonsbo N2 vs N3 NAS Case – Get It Right First Time!

Last updated on 04 Apr 2024 📧 Subscribe
Contents hide
1 Jonsbo N3 Vs N2 NAS Enclosure – Which Should You Buy?
1.1 8 Bays Vs 5 Bays – Long-Term Storage!
1.2 LED Indicators on the Jonsbo N3 are Better…and THERE!
1.3 Rubber Feet Vs Rubber Base Panel
1.4 More AND Better Ventilation in the Jonsbo N3 Vs the N2
1.5 Unusual PSU Placement on the Jonsbo N3
1.6 Bigger and Better CPU Fans are possible on the Jonsbo N3
1.7 Bigger, Better, and FATTER PCIe Card Support on the Jonsbo N3
2 Jonsbo N3 vs N2 NAS Case – Conclusion and Verdict
3 Need Advice on Data Storage from an Expert?

Jonsbo N3 Vs N2 NAS Enclosure – Which Should You Buy?

It would be fair to say that 2023 has been an absolute boom year for DIY NAS servers! While the concept of owning your own cloud and building it from scratch isn’t new, and brands have been investing heavily in this kind of technology for a while, this year has seen an unprecedented number of users make the switch from expensive turnkey solutions to much more affordable and customizable DIY NAS solutions. Although the technology and architecture of PC building have long been explored, even by the most entry-level IT enthusiasts, server cases are an area of this industry that hasn’t really seen the same level of popularity and dynamism. That said, there are always going to be exceptions to the rule, and one NAS case manufacturer that has really stood out above the majority of others is Jonsbo.

USEFUL RESOURCES:

Here are links to the previous full reviews of the Jonsbo N2, N3 and N4 NAS Cases:

While this brand engineers many different kinds of computer enclosures, they have gained significant acclaim in the last few years with the development of their Jonsbo N1, N2, and N3 cases. However, it is the Jonsbo N2 and N3 that serious NAS DIY builders have been pondering, as both of these cases represent possibly the best examples of compact yet highly upgradable enclosures to start building your very own NAS server. Buying the wrong case can often result in your NAS losing a lot of its scalability and upgradability down the line, as well as significantly limiting the potential for storage. And I haven’t even touched on the potential performance loss related to poor temperature management! So, today I want to help you choose between the Jonsbo N2 and N3 NAS Enclosure to determine which one is best for you and your custom NAS server.

Here’s a comparison table for the Jonsbo N2 and Jonsbo N3:

Feature Jonsbo N2

Jonsbo N3

Model N2 Black / N2 White N3
Amazon $149 (Check Amazon HERE) $170 (Check Amazon HERE)
Aliexpress $76 (Check Aliexpress HERE) $99.42 (Check Aliexpress HERE)
Dimension 222.5mm(W) x 222.5mm(D) x 224mm(H) 233mm(W) x 262mm(D) x 298mm(H)
YouTube Review: HERE HERE
Material – External cover 2.0mm Aluminum alloy 2.0mm Aluminum alloy
Material – Internal Structure 1mm Steel 1mm Steel
Drive Bay 2.5SSD1 / 3.5HDD5 2.5SSD1 / 3.5HDD8
Motherboard ITX ITX
PCI Expansion Slot 1 x Low profile single slot 2
Front I/O Port 1*USB3.0 / USB3.2 Gen2 Type-C + Audio+Mic (Headset+mic combined) 1*USB3.0 / USB3.2 Gen2 Type-C + Audio+Mic (Headset+mic combined)
PSU Support SFX ≤150mm SFX ≤105mm
Max. CPU Cooler Height ≤65mm ≤130mm
Max. Display Card Length ≤197mm long (Low profile) ≤250mm
Cooling System 12015mm fan*1 (built-in) Hard disk compartment: 10025mm2 (optional) Main board compartment: 8025mm2 (optional)
Weight Net 2.9kg Net 3.9kg

Differences between the two models are highlighted in bold.

Before we go further, it’s worth highlighting that regardless of which one of these two NAS cases you buy, you are getting an exceptionally well-put-together piece of kit. So, regardless of which unit you decide on, both systems have the following in common:

What They Have in Common:

  • Both use ITX or DTX motherboards
  • Both require SFX PSUs
  • Both support SATA and SAS Drive connectivity
  • Both use rubber handles, not complete trays
  • Both arrive with molex-powered backplanes for the SATA connections
  • Neither arrive with necessary SATA cables for internal connections
  • Both support the installation of 1x 2.5″ SATA drive in the internal casing

NOTE – You can watch the FULL YouTube Comparison of the Jonsbo N2 and N3 HERE

But that is enough about what they have in common. Let’s talk about what makes them different and help you decide which one is best for you and your data.

8 Bays Vs 5 Bays – Long-Term Storage!

This difference is probably the most evident of all: the N3 case supports 8 SATA drives, while the N2 only supports 5. This distinction might seem minor, but considering that current traditional hard drives can have capacities up to 22 terabytes, the five-bay enclosure might lead to a potential loss of up to 66 terabytes of expandability.

Once you consider RAID configurations and redundancy, you might realize down the road that those extra bays would have been useful. Even if you don’t plan on utilizing all 8 hard drives in your Jonsbo NAS build from the outset, having those empty bays can be invaluable for future storage expansion.

LED Indicators on the Jonsbo N3 are Better…and THERE!

Another subtle but often overlooked difference is that the Jonsbo N2 case lacks LED indicators. While this might seem trivial, it means that you won’t have visual feedback on drive activity, health, or even if they’re spinning at all. Sure, louder or high-capacity drives might produce audible sounds during operation, but traditionally, LED indicators provide a quick way to gauge drive health.

Thankfully, the Jonsbo N3 features five individual LEDs, each representing the status of a SATA drive within the enclosure. Although neither system supports or possesses a space for an LCD panel for real-time info, this small detail might be vital for routine NAS monitoring.

Rubber Feet Vs Rubber Base Panel

This is a unique difference that hasn’t garnered much attention online. The base of the newer Jonsbo N3 enclosure features four individual rubber feet, elevating the system slightly off the surface it rests upon. These feet not only permit a slight airflow underneath but also dampen vibrations from the mechanical hard drives, preventing them from transferring to the surface. As advantageous as this sounds, the Jonsbo N2 takes it a step further: instead of individual feet, its entire base panel is essentially one large rubber pad.

This design more effectively dampens vibrations from the NAS during operation, resulting in a quieter system during high activity. The reason Jonsbo shifted away from this design in the N3 isn’t clear—maybe due to heat or airflow considerations. But if you’re aiming for a quieter NAS during typical operations, the N2’s base pad certainly provides an edge. However, it’s essential to consider that the N2’s compact size might mean less airflow, potentially making its fans louder. Conversely, the N3, being an eight-bay system, might naturally produce more noise from drive operations. As with most things, there are pros and cons to weigh.

More AND Better Ventilation in the Jonsbo N3 Vs the N2

As mentioned earlier, the Jonsbo N3 offers superior ventilation compared to the N2. Not only is the N3 a larger NAS enclosure in terms of height, depth, and width, but it also comes with two rear fans, whereas the N2 only has one. Moreover, the N3 features two screw hole-ready cavities that allow the installation of two additional fans on the rear, ensuring enhanced airflow over the main motherboard and CPU during operation.

While the N2 does possess a ventilated top panel, its reduced height necessitates more rapid air dissipation. Coupled with numerous pinhole vents on its front chassis and the augmented active airflow from the fans, the N3 emerges as the superior and more effectively ventilated NAS case overall.

Unusual PSU Placement on the Jonsbo N3

This point might intrigue PC traditionalists. The Jonsbo N2 adopts a fairly conventional PSU placement at the rear of the casing, clearly visible with a standard three-pin power adapter directly connecting to the case where the PSU is situated. Conversely, the Jonsbo N3 opts to position the PSU deeper within the enclosure. This decision likely aims to allocate more space for the eight hard drive bays, allowing for expanded storage without significantly enlarging the case compared to the N2.

This deeper PSU placement involves an internal mains power three-pin extension with an angled connector. Although the rear of the N3 features a similar three-pin power connector, it effectively routes to an extension cable connecting to the actual PSU internally. Naturally, this results in the N3’s internal airflow being somewhat disrupted by a sizable SFX PSU, potentially obstructing some airflow. This challenge is somewhat counterbalanced by the N3’s enhanced ventilation and multiple fans. Likely, these design choices are interconnected. In essence, constructing your Jonsbo N3 may require more thoughtful planning, ensuring you don’t inadvertently install a component prematurely, which could necessitate a restart.

Bigger and Better CPU Fans are possible on the Jonsbo N3

The Jonsbo N3 allows users to integrate more powerful hardware components compared to its counterpart. Likely influenced by its support for eight SATA drives, leading to heftier storage requirements, the N3 has a more spacious cavity allocated for the motherboard and CPU. While the N2 accommodates CPU fans and heat sinks up to 65mm, the N3 generously doubles that space, allowing up to 130mm.

Users considering high-end AMD Ryzen processors or Intel Core 12th and 13th Gen processors will require more efficient CPU fans, many of which may be too large for the N2 or might hinder CPU efficiency due to their size. For those envisioning a more prosumer or business-centric NAS system, the Jonsbo N3 is undeniably the superior choice.

Bigger, Better, and FATTER PCIe Card Support on the Jonsbo N3

Mirroring the expansive cavity provision for the CPU fan in the Jonsbo N3, PCIe upgrades can reach their full potential with the N3, supporting double-height PCIe cards as well as full-length and double-width cards. For perspective, the majority of users opting for the Jonsbo N2 or N3 NAS cases will be restricted to ITX motherboards due to the compact design of these cases. ITX motherboards usually come with a single PCIe slot for upgrades.

Users must strategically decide between network bandwidth upgrade cards, storage upgrade cards, graphics cards, or multi-feature combo cards. Given the need for additional features and heat sinks on these cards to dissipate generated heat, the N3’s ample space proves advantageous. Just as the N3 is recommended for more powerful CPUs due to the extended space for CPU fans, it’s also optimal for PCIe upgrades, offering greater flexibility for larger and superior cards.

Jonsbo N3 vs N2 NAS Case – Conclusion and Verdict

When examining the Jonsbo N2 and N3 side by side, several distinctions become evident. The N3 is tailored for users who anticipate a future of expansion and increased power. Its design, with space for eight SATA drives, compared to the N2’s five, offers more room for storage growth, potentially accommodating up to an additional 66 terabytes. The N3’s height, width, and depth are more generous, allowing for larger CPU fans (up to 130mm) and more extensive PCIe cards, both in length and width.

This makes the N3 particularly suited for those looking to integrate high-end processors or robust PCIe upgrades. While the N2 might appeal to those seeking a compact and efficient design, the N3 stands out for those prioritizing upgradeability, performance, and flexibility. The choice between the two essentially boils down to one’s immediate needs and future aspirations for their NAS system.

Amazon >>>

$149 (Check Amazon HERE)

 Aliexpress >>>

$76 (Check Aliexpress HERE)

 Amazon >>>

$170 (Check Amazon HERE)

 Aliexpress >>>

$99.42 (Check Aliexpress HERE)

So, those are the primary differences between the Jonsbo N2 and N3 cases. Hopefully, this guide aids in determining which case is optimal for your setup. Below are links to purchase either of these cases from various retailers. Using these links will send a small fee to NAS Compares, allowing us to reinvest in our work. You’ll also find buyer and build guides for both the N2 and N3, tailored to budgets of $250, $500, and $750. Thank you for reading.

📧 SUBSCRIBE TO OUR NEWSLETTER 🔔


    🔒 Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? 📧 Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      🔒Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ☕ Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
          
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ☕ WE LOVE COFFEE ☕
       
      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      605 thoughts on “Jonsbo N2 vs N3 NAS Case – Get It Right First Time!”

      2. I bought a Topton computer on Aliexpress and I was so angry with myself, it was a poor quality product, without technical support, it was money thrown away. If you want some advice from a friend, look for another brand.
        REPLY ON YOUTUBE

      3. Those cases are still not that great. Im going to buy the ugreen nas just because of the size and how well made that case is made. You can’t match that with a DIY case
        REPLY ON YOUTUBE

      4. Loved your vid, TrueNAS is a bit sketchy to first setup but does it job after a while of tinkering. The 6 port sata controller based on the ASMedia 1166 chipset is the way to go? Works great with TN instead of the JMB585… Don’t cheap out on that one. I used a PCI x4 card, neater and cleaner with cables. And btw, for the money and quality of parts stop using the Ali bords and just buy an Asus N100 or something… Good bios, great hardware and you can support local or national companies
        REPLY ON YOUTUBE

      5. I bought a TOPTON computer on Aliexpress and I don’t recommend it, it’s a disposable and maintenance-free product. I don’t recommend it either.
        REPLY ON YOUTUBE

      7. tl;dr: get an 8bay server. With lights-out management, more ports and options than you can shake a stick at, redundent power supplies, sensor information and then some, drive bays made to not irritate each other with vibrations, an air flow concept validated to support a full load of drives, a backplane with ventilations slots, the list goes on. For your stuff at home, if a microserver with 4x20TB won’t do you need to look for enterprise solutions.
        Thorough review, though.
        REPLY ON YOUTUBE

      15. Bought this case from AliExpress for $85 w/ free shipping about 4-6 weeks ago to build my Homelab server/NAS/cluster in & I’m feeling a little 50/50 on it. Maybe it is just because I’m still waiting on shipping, maybe it is because Unifi just dropped their dedicated solution. Maybe also my mind will change when I get it in-hand & actually get stuck in on the project, who knows?
        REPLY ON YOUTUBE

      16. You FAILED, I can buy used HP Z800 with 128RAM 2x XEON, for 300Eur. I is way better then any china crap you have here, the Synology or QNAP is even more overprices china crap.
        REPLY ON YOUTUBE

      17. I wonder how are you going to plug 8 nvme drives with that expansion card, if pcie bifurcation can be set up as 4+4+4+4 as a max? I’m curious because I’m planning to use 4xnvme in a BIOS RAID0 as a cache drive for my NAS, and that can be made with Aorus B550 mITX motherboard.
        PS Unless that’s a PCIex4-to-8xSATA expansion card for SATA M.2 drives…
        REPLY ON YOUTUBE

      19. 6:20 You have seen nothing. I once received a server power cable packed in a box which was larger then the case box on your desk. Bit shorter but much wider. It was also packed in all kinds of bubble wrap. A fricking standard power cable! ????
        REPLY ON YOUTUBE

      23. Perfect case, literally checks every box for me. EXCEPT when I discovered its only 6x 3.5in drives + 2x 2.5 drives. What a fucking re***ded design, just give me 8x 3.5 bays. Excuse my french. The next choice for me would be the N3. The problem is I aleady have a CPU and ATX mobo. If I go N3 I need a new mobo. How annoying.
        REPLY ON YOUTUBE

      25. Damn I really like this case, but the cooling for the HDD being just a single fan far away from the HDD’s.. I really like Jonsbo they tend to make simple but well made cases.
        REPLY ON YOUTUBE

      26. The *MASSIVE* Jonsbo N5 Review is NOW LIVE. Watch the video here – https://www.youtube.com/watch?v=IVkZk9Impnk or read the written Review/Guide – https://nascompares.com/2024/10/04/jonsbo-n5-review/ on NASCompares #jobsno #diynas #datastorage #byo #diy
        REPLY ON YOUTUBE

      27. It would have been nice to speak to what each build is capable of. I’m thinking about building a nas but I have no idea if I’m putting something together that would be overkill
        REPLY ON YOUTUBE

      35. So you get the unraid license for free? So your nas cost hundred bucks more. And it is an Motherboard and a io shield.

        And proxmox is a hypervisor and has absolutely nothing to do with network attached storage.
        REPLY ON YOUTUBE

      44. It’s clearly not geared towards “beefy cpu”, but MATX mobo gives you more slots and stuff to play with. Even then, something like 8500G only draws 40 wats yet can be called “beefy CPU” for a NAS. It’s Okay.
        REPLY ON YOUTUBE

      46. the problem is that manufacturer don’t do low profile gpu anymore, not even short lenght itx, because it’s costly, so to reduce costs, computers are turning bigger and bigger. technology improvements? who cares! this is just about profit!
        REPLY ON YOUTUBE

      51. 11:00 What i want is a wider N3, call it an N5, and rather than built in bays(or maybe an optional variant without drive bays), it just has 6×5.25 bays so you can install your own drive cages.
        Want 10×3.5 drives? Get a pair of those silverstone drive enclosure 3×5.25 into 5×3.5 No tools whatsoever to use those, just pop the drive in and out no screws, no trays no rubber bumpers. Want a mix of SATA bulk storage and SATA SSDs? Get one of those silverstone enclosures, then one of those 16 bay ICYDOCK enclosures, and the last 5.25 bay could be for an actual optical drive.
        REPLY ON YOUTUBE

      52. 6:00 To be fair, if this had more HDDs, i would actually use a 15mm 2.5 inch drive bay, but i’d like 3 of them, for 3 of those Optane 905P drives.
        REPLY ON YOUTUBE

      56. Considering it’s only 5mm..say maybe 7mm taking into account metal thickness, difference in the case size versus ATX mb you should see if it’s possible to shoehorn one on there. Yeah you’d have to use half height cards but all 4 rear slots should work(I bet most boards could be carefully shaved along the edges to take out the extra size for the N4 nas case
        REPLY ON YOUTUBE

      61. Thank you. I’d love to see the next steps: actually connecting the box to the internet and your in-house network and configuring the system to function as intended. Good job!
        REPLY ON YOUTUBE

      63. Unfortunate the Asrock Z690M-ITX/AX is not easy to find anymore (Amazon uk/de don’t ship to Denmark and .se have almost nothing to offer. And the price has gone up quite a bit on Ali Express unless your willing to take a chance at a used board. To me the Z790M-ITX Wifi seems to the be the same board, just with DDR5. Also supports 12gen Intel cpu’s. Perifials seem the same as the Z690-ITX/AX Should there be any problems going with this board ? ( I can buy this new in local stores at a little higher price as your initial listing for the Z690 from Amazon.
        REPLY ON YOUTUBE

      64. I think the thing you’re missing is the cost. Firstly the fact that mATX motherboards are usually cheaper than mITX because the latter has less space and expansion. Also the N4 is, at least at the retailer I’m looking at, by far the cheapest of these Jonsbo NAS cases. It’s even cheaper than the Node 304/804 which don’t have any backplane

        Speaking for myself, my NAS is a i5-4590 in a 10 year old mATX motherboard with 2x 10TB HDDs (new-ish) and 2x 2TB HDDs. Mostly repurposing old hardware. I’ll almost surely upgrade it fairly soon but when I do it’ll be to the Ryzen 5 3600X that’s my current daily driver which also has an mATX board. This N4 case? Seems perfect for my needs. None of their other cases really meet my requirements as well as this one does. And is certainly a decent upgrade from what can be best be described as the curbside case I’m currently using which is ugly, loud and has poor HDD ventilation
        REPLY ON YOUTUBE

      65. Anyone who’s building PC’s should already have a toolkit with allen key bits, surely. Getting hung up on one of those seems a little over the top. Either way, nice case, seems like an iron plated pain in the posterior to get one after a quick look around. A Supermicro Mini-ITX mobo with an Atom processor on would be a great combo with this, some come with 12 SATA ports. My main concern about this case are all those small and thus noisy fans. I’d have liked to see a big-ass 20 cm fan on the rear or something to suck air through the whole thing.
        REPLY ON YOUTUBE

      66. Marketing this as a NAS case is a mistake. This is a desktop lab case. If you want more than 6 drives in a NAS, one should be using a rack-mounted solution anyway with 4-6 fans. I already have a 16 drive 3U rackable and ordered one of these to move docker off the other system. I’d have been happy with only 4 total swapable bays (2×2) and a lower profile case.
        REPLY ON YOUTUBE

      69. Helpful hints:
        1) first boot the motherboard outside of the case. If it is dead you don’t want to be wasting time installing it and routing cables
        2) never use a cheap USB drive. Use a Samsung Fit or Bar USB Drive. You can do a search for the guy who tested them out and they beat out the rest. I am not sure but I think you can clone the USB. If so get two so when the first one dies you are not scambling looking for configurations.
        3) update the BIOS. If the board dies it can be RMA’ed.
        4) Use the Preclear tool in Unraid on the hard drives before using them. Side note, if you want a really nice NAS case SuperMirco offers a 4 bay one. It is not cheap but it will last and also keep your drives cool. best of luck.
        REPLY ON YOUTUBE

      70. why are my replies being deleted, i try telling a guy that was asking me what to do and my comments are gone after a few seconds, what gives?
        shit antibot reply filters, I can’t even tell the guy to email me instead, what a joke
        REPLY ON YOUTUBE

      71. back when i build my nas , i buy a full atx lga 1150 with 2pcie 16x 2pci 6 drives 4dim , for 70eu , and got a celeron for 40 that i later upgrade with i5 , got a 10gb nic , and still got a free pcie for gpu or extra storage , and house everthing in old style case that had 8 drive slot , and 4dvd slots , yes is bit bigger and you may need more time to swap a drive , but is much more powerful and upgradable ,
        REPLY ON YOUTUBE

      72. The fan runs at full speed, sound like a helicopter up side is hd is very chilled even if they are stacked next to each other. The 4 alan key screws can be replaced with the 4 Countersunk computer screws. This case is really big even for a mini itx.
        REPLY ON YOUTUBE

      73. So a N5 with :
        12 hdd 3.5” and 3 120mm fan at the bottom, full backplane
        A top space for full ATX motherboord and full length pcie card and itx power supply.
        When ?
        REPLY ON YOUTUBE

      76. I got the information from the truenas scale community to avoid these sata extender however they gonna look like (pcie, m2, etc) because the chips on them aren’t that stable overall. Also the chip which comes with the motherboard. Therefore there recommendation is to buy a isa 9300 hba card and use the pcie slot for it.
        REPLY ON YOUTUBE

      77. Something is not clear for me for the wiring of the internal HDDs board. There are 2 connectors, one Molex and one SATA Power. Should I connect both of them? Only one?
        There is no mention of this part in the instruction manual. In addition I can say that in my build (did yesterday) I used only the Molex and the rear FAN is not working.
        Please somebody had experience with this?
        REPLY ON YOUTUBE

      78. so basically wait for the N5 (or whatever they plan to call it)that is an improvement on the N3 to be wider to allow for more pcie slots, bigger motherboards ???? this is the only thing holding me back from buying for now. Will stick to my current nas for now until there is something more interesting to perk my interest.
        REPLY ON YOUTUBE

      79. those trays are god damn awful.

        the psu vents, there is the vents above, so it’s not like there is none. so not sure that was a big issue.

        Couldn’t you have just set it up then run a temp test to be conclusive? to at least make your point valid about heating issues.

        Though your argument about beefy heatsink not fitting is valid, but is there any cpu heatsinks that would fit in this type of case? why not mention and test for that to see the temp results? that would be worth exploring wouldn’t it?
        REPLY ON YOUTUBE

      80. It’s really crazy how budget you can go! ATM I’m looking at a total budget of 200usd for a NAS with 16TBs of storage in a raid 6 config no idea how I did it but it’s an amazing thing crazy utility.
        REPLY ON YOUTUBE

      81. They botched the N4 hard. So much opportunity to make it great and they make it worse than the N3. What we need is an N5 with 10X hotswaps, room for a proper ATX, and full PCIe slots.
        REPLY ON YOUTUBE

      87. NVMe SSD in NAS with even 10GbE it’s wasted potential, single drive capabel to read/write even 6000MB/s is limited to 1000MB/s and they works in raid xD. I have DS220+ and I replace two 4TB ironwolf with 2TB sata ssd for system and VM, and for quieter operations and 12TB Toshiba HDD for storage, two replaced ironwolfs are for backup
        REPLY ON YOUTUBE

      89. you deserve a like and sub
        give this man a like
        ????????????????????????????????????????????
        it’s rare to find legend people nowadays
        Thanks man that was super helpful
        ❤
        REPLY ON YOUTUBE

      90. I still like 2.5″ drives. Primary reason, so I can use the NVMe slot for expansion and boot off the 2.5″ SSD if needed. 2.5″ are still SATA too, so no need for a bunch on PCIe lanes. I agree with the rubber straps though, those are annoying.
        REPLY ON YOUTUBE

      91. There’s a lot of people complaining a lot about this case, forgetting that not everyone *needs* 8 hot swappable drives and full height/length PCI-E cards. I just did a build in one of these, and it’s perfect for my needs. I’ve gone with a mid-range CPU (Ryzen 5 5600G), 4 drives, and a couple of 2.5Gbe NICs. It’s been happily running my Proxmox VMs and TrueNAS for weeks. If they made something as big as the N3, it wouldn’t fit in the space where I have the N4.

        Jonsbo probably can and should update the N3 in the same style for those who do need the extra power and storage. I think the N2 and N3 look a little cheap personally, but there’s room for them to make options for everyone here. I am really impressed with the quality overall. I do kind of agree with your comments on drive mounting, but swapping drives is a very rare occurrence for me, so I’m okay with it.

        I will add that I have two very minor complaints about the N4:
        – The stock 120mm fan is a little louder than I’d like – not uncomfortably loud, but I probably will replace it in the future.
        – The PSU placement is pretty bad. This is my first build with a SFX PSU, and I was caught out by the short 24-pin ATX connector. I had to buy an extension for it to reach. Something to be aware of for anyone doing a build with the N4.
        REPLY ON YOUTUBE

      95. Hate to disagree because your reviews are great, but the N3 has a lots of issue you dismissed. first these 2 x 100mm stupid that you you have to replace (noisy and bad) adds to the price, also its is a big fat case. I agree on the pros but these cons are what make the N2 a great deal (cheaper, smaller) so unless you really need to put a gpu or need 8 drives, I would go with the n2. the n4 is just a dumb idea
        REPLY ON YOUTUBE

      99. I still don’t get why you want to put a nice piece of WOOD on a NAS, whilst you use RUBBER bands to pull out the HDD’s…
        I’d prefer the money invested in wood, to have real HDD bays with buttons!
        REPLY ON YOUTUBE

      102. Hopefully they fix everything on the N4 and launch it as a N5.
        6x 3.5″ + 2x 2.5″ + possibly 2x M.2 on the board, mATX, ATX PSU, full height PCIe, all sata drives hot swappable on a back plate… probably the competition already has something like that surely.
        REPLY ON YOUTUBE

      103. How about Kotumy (seems present also with different names) 6 or 8 bay cases? They have proper hdd caddies, they can fit mATX mobo with 4 full slot PCIe. Looks like it ticks all the boxes. I’d welcome review of this case. Look is not the best but maybe repaint will help.
        REPLY ON YOUTUBE

      104. I’ve already ordered my N4 because I’m repurposing my matx gaming hardware as i upgrade away from it. I’m using a Thermalright AXP90-X53 with a Silverstone 180mm Penetrator instead of the coolers own fan probably mounted diagonal with rubber fan mounts.(going to be snug) grabbed a PSU from wolfgang’s database of good idle PSU’s, my intention is to use the gaming matx boards pcie to add a few nvme for read/write caching, I’m also eyeballing the intel a380 low profile, but honestly, I’m not sure i even want to fall down the transcoding rabbit hole
        REPLY ON YOUTUBE

      105. I bought the N2, mainly for the compact footprint and, because I have a lot of 2.5″ SSDs, I’m in the middle of swapping out the 5 disk backplane for a IBM 69Y0650 8×2.5-inch backplane, just spending a bit of time building a custom power cable for the new backplane as it uses a 16 pin to 14 pin cable. The width is identical to the 5×3.5″ board, so it’ll fit without any serious case modding and I can print a guide for inserting SATA SSDs. It uses a pair of SFF-8087 connectors, so I’ll probably grab a IT mode HBA card.

        Using SSDs also lets me bring the backplane forward to create more space at the black for a bigger fan and better cable management.

        Well, that’s the plan anyway.
        REPLY ON YOUTUBE

      108. Regarding Chapters! YouTube is not indexing the chapters for this video correctly. You can find the correct chapters linked in the description, or the time stamps below:
        00:00 – The Start
        00:18 – Why Jonsbo?
        01:08 – Price and Value
        02:28 – Design
        05:06 – Storage
        08:30 – Internal Hardware
        12:51 – Conclusion
        REPLY ON YOUTUBE

      109. Love the petulance. Don’t put it aside. Great overview – does the YouTube algorithm tell you this was just the comparison review we all needed?
        REPLY ON YOUTUBE

      110. Hello, Does an storage external HHD only powered up every 6 months have to be refreshed to another HHD every 3 to 5 years to prevent data loss? Any help would be greatly appreciated. Thank you.????????
        REPLY ON YOUTUBE

      111. Do I win a prize for having the most disks inside a Jonsbo N3 Case – 18?

        8 x 3.5″ HDDs, 4 x NVMe SSDs (PCIe x16 slot – quad NVMe card) plus 6 x 2.5″ SATA SSDs (2 using the upper case supports, 2 using a dual-bay expansion slot bracket and 2 stuck on top of the PSU).
        REPLY ON YOUTUBE

      112. Thanks to your channel and excellent videos I chose the N2 case 2-3 months ago and I’m very happy with it.

        In it I built the following:
        ————————————–
        sata card —- MZHOU ASM1166 6xSATA PCIe 3.0 x4
        cpu —- Raptor Lake i5-14500T + Termalright LGA1700 Frame
        cpu cooler —- Noctua NH-L12 Ghost S1 Edition
        motherboard —- ASRock Z790M-ITX WiFi
        ram —- Kingston FURY Beast RGB 64GB DDR5
        ZFS Mirror —- 2x Kingston FURY Renegade 500GB
        ZFS Raidz2 —- 5x Western Digital Red Plus 6TB
        case —- Jonsbo N2 White
        psu —- HDPLEX 250W GaN Passive
        case cooler —- Noctua NF-A12x25

        Some notes:
        ——————–
        – the 25mm case cooler fitted perfectly with right angled Sata power and data cables
        – it’s currently running proxmox with multiple services on the mirrored zfs
        – the cpu is a 14 core, 20 thread beast and zfs keeps my ram usage busy
        – the rgb ram was on sale, so don’t judge me lol
        – i do wish it were 6 bay at least, that would have been perfect for raidz2
        REPLY ON YOUTUBE

      113. after few good months of using my N3 what I can say:
        1- with 5 Noctua fans inside, I have temperature of HDDs always around 35C (I can set this up anything between 30 adn 50C from my Home Assistant) and that is with around 25% of the fans speed
        2- similarly CPU and NVMe – very low temperatures – actually NVMe are around 25C and CPU around 40C
        3- the bays… hmm, that was ONE TIME issue while putting the disks, after that… install and forget
        4- I put inside: 4x WD and 2x… 2.5″ Crucial SSD – yeap, the m2 slots on my mobo are used as boot disks (in mirror) so no way of reusing them for fast storage
        5- storage speed: my mobo has 4x 2.5Gbps NICs, and I connected 2 of them – from my SSD pool I can copy with around 230MB/s, from my HDD pool: … 230MB/s – cannot see the difference 😉
        6- power consumption: average 40W
        REPLY ON YOUTUBE

      115. 10:30 Jonsbo shows an image of the N3 with a de-branded MSI RTX 3070 Ventus OC 2X inside the case in their website, so you might be able to fit some mid to mid-high end cards in there providing they’re not longer than 250mm. Though the best card to go with it IMO would be the RTX 4000 Ada SFF, which is only slightly worse than the RTX 4090 but is a half height 2 slot card which requires no PCIe power connectors.
        REPLY ON YOUTUBE

      120. This layout actually sucks. The backplane is going to make it very difficult to install an Icy Dock if you want to run SSD only. Otherwise you could install 12 SSD’s into those 3.5″ slots.
        REPLY ON YOUTUBE

      121. I would like them, but as for the price I would expect at least a better way to mount HDDs; with cooling in mind I could as well get a regular small tower
        REPLY ON YOUTUBE

      122. This should have 8 drive supports full 3.5 and full 170 mm cpu cooler support. Then it could also fit full size gpus and order pci-e cards. Pci-e is the future of storage cards and other types of cards. Jonsbo really did a swing and miss here. Maybe a n6 will come that will fix it all?
        REPLY ON YOUTUBE

      125. Will this support sfx-l or just sfx psu’s? I’ve bought the case in the ali holiday celebration at 98 quid with delivery (which I feel is worth it for my needs) and looking for a PSU to pair with it. I see a really nice deal on an sfx-l but worry about fitting length in.
        REPLY ON YOUTUBE

      126. I thing showing off a plain old linux (ubuntu, fedora or anything, of course server flavour) with Cockpit would be nice. (there’s addon for smb/nfs, zfs and podman)
        REPLY ON YOUTUBE

      128. Those connectors for front panel are standard front panel connectors. They’re not on your motherboard because you bought a cheap ITX one.
        REPLY ON YOUTUBE

      132. A Chinese netizen named “曝躁老鸽” launched a computer case named “Treasure寶藏盒” a long time ago.
        However, this “Jonsbo N4” product clearly plagiarizes his work.
        REPLY ON YOUTUBE

      133. Hello there, Im looking to get into the homlab community and build my own server.
        After a bit of research I came across a very interesting case that barely anybody in the YT homelab / NAS realm seems to be aware of.

        Im talking about the Aerocool Cipher mid tower case. There are only 2 videos about it on whole YT, despite it having space for 12 sata hdd’s and costs only around 80€.
        Maybe you find the time to take a look at it.
        REPLY ON YOUTUBE

      134. Wow. another great video. Thanks so much for all the excellent content. I’ve been gearing up to replace my old Dell PowerEdge r510 12-HDD server. It’s such a noise generator and power hog. I wonder if you could maybe do a video that focuses on daisy-chaining servers for more space. I don’t want to manage multiple Unraid instances. What I’d like to do is set up one server and then attach multiple SANs as my library grows.
        REPLY ON YOUTUBE

      136. I wish I could get the N3 in white like you can the N2. It’s probably been.. Jeeze…. 20 years since i’ve painted a case, lol. The N4 looks nice.
        REPLY ON YOUTUBE

      137. Thaks a lot for this! It made building my N2 NAS a breeze. Different motherboard, different power supply, but this video is an excellent resource in any case.
        REPLY ON YOUTUBE

      138. Id be interested in seeing how higher quality fans would make a difference in the cooling capability, like replacing that stock 120mm fan with a Phanteks T30, and adding an 60 or 80mm Noctua as an intake in the top right 2 3.5in drive bays (since there’s no SATA/SAS backplane there anyway) that would give cool air to both the PSU and bottom of the motherboard.

        You could mod fans into the top cover as well but then you’d have to deal with the cables every time you open it, unless you add some thin pieces of metal to mount the fans to
        REPLY ON YOUTUBE

      139. I’m getting Fractal Design Terra vibes. Maybe they’re hoping to pair the two things together? Although why Fractal and others don’t do their own, I’ll never know. And in an ideal world, why not do the Terra in a mid sized version as well, and do things like case with built in or modular area for a NAS so we can stop having unnecessary additional boxes everywhere.
        REPLY ON YOUTUBE

      143. Jonsbo N4 Mini feels more like a case that tries to be cheaper and more available “System 76” cases – but more into a “SFF PC with some media” instead of “Home Nas”

        Tho… honestly making a slim Video editing case… with ERYING Mobile CPU mobos.. or Intel Core “T” chip + low profile A380… could be a interesting thing to try

        and since it has already places for storage.. instead of making it a NAS, use SSD for OS and the SAS area for RAID storage which this video editing machine would be based on
        REPLY ON YOUTUBE

      145. Вот отличная видеокарта для этого корпуса GIGABYTE GeForce RTX 4060 OC Low Profile [GV-N4060OC-8GL], а остальные отсеки без Горячей замены из-за блока питания. Т.ч. это компромиссы. Лично для меня этот корпус то что мне нужно.
        REPLY ON YOUTUBE

      147. 10:12 – you dont need a base/side level vent because you should install the PSU upside down, so that it also helps the two HDDs and SSDs with cooling by sucking the air from the front of the case, passing through the HDDs/SSDs and exhausting it via the back, just like the 120 fan is doing it for the other half of the case
        REPLY ON YOUTUBE

      148. N4 is a stopgap solution for Jonsbo, Because most of these manufacturers have at least one product line support: MATX + SFX PSU + 6 to 8 bay.

        Even its design is nothing new, that wooden panel and half height PCIE design was there 3 years ago, looks cool and the cooling is actually bad
        REPLY ON YOUTUBE

      149. IMO this was a downgrade in comparison to the N3 simply because the N3 is a smaller case for Minit-ITX mobos, but it can fit 8 3.5″ drives into a backplane. And it’s not like they couldn’t simply maintain the 8 drive structure from the N3 and add the extra two spaces for 2.5″ drives. You can comfortably fit 10 drives in there if they go vertical like they are in the N2 and N3.
        REPLY ON YOUTUBE

      150. 0:38: ???? Review of the latest Jonsbo N4 NAS case highlighting its aesthetic design and potential software options.
        2:39: ⚙️ Analysis of storage bays and interfaces in Jonsbo N4 NAS Case.
        4:44: ⚙️ Limitations of GPU and storage card compatibility in Jonsbo N4 NAS Case.
        7:42: ⚙️ Limitations in cooling capabilities of the M ATX case may hinder performance potential.
        9:43: ⚠️ Challenges with PSU placement and airflow in the Jonsbo N4 NAS Case.

        Timestamps by Tammy AI
        REPLY ON YOUTUBE

      151. While you’re points are valid, for most use cases it won’t matter. NAS only can be run by a dual core and a low height cooler. mATX typically has 2 nvme. You can add a dual or quad low height nvme card(s). If you are going to run it as more of a server then a NAS, all of that above still applies as most Homelab server builds are typically running the CPU at 50% or less most of the time. If you have an Intel chip, you can use the iGPU for transcoding. So, while this case could be improved, I wouldn’t let any of this stop you if you need mATX. Cooling for the drives may be an issue depending on your environment but you can put a fan or two above the PSU.
        REPLY ON YOUTUBE

      152. Some really sus design choices for an otherwise good case. Ideas for the eventual N5 case: Clone the left side of the hard drive compartment to the right, but make the second backplane an optional upsell if you’re that concerned about cost Jonsbo. Keep the Micro-Atx mobo compatibility but allow for full height/length add-on cards and use the required increase in compartment space to include a pair 120mm fan mounts on one side. Ditch the rubber bands for actual drive sleds (even stamped sheet metal would be an improvement). Because at $142.31 (shipping included and a 25% off base price discount) you’re approaching Silverstone territory (CS380 ($239.99)/CS382($249.99)) price-wise. As it stands with the N4 the juice (money saved vs SST) is not worth the squeeze.
        REPLY ON YOUTUBE

      157. I still love my N1. With 139 Euros it wasnt cheap. But its reasonable when looking at the overall budget(incl. Storage Drives) for a NAS/HomeServer.
        REPLY ON YOUTUBE

      160. I hope the 8 bay Ugreen works out. If they lock it down super hard between now and May so I’d be forced to use their shitty software, I think I can cancel the pledge.

        All Jonsbo needs to do is release a bigger Jonsbo N3 with 120/140mm rear fan(s), drive trays that don’t suck, 8 bays, etc.
        REPLY ON YOUTUBE

      162. You’re just set on it being some top of the line power system and the whole review is about how it’s not something else, including the rubbers that are great for a design ‘not too huge living room piece’ 🙂
        REPLY ON YOUTUBE

      163. This actually is great for my use case, but I just can’t justify spending about $200 for what amounts to just a case swap. I know most of that is just shipping to the states but still, it’s mostly just a (very nice) cosmetic upgrade to what I’m using now.
        REPLY ON YOUTUBE

      164. I ordered one due to the mATX support. I have an intel 12100 system with Noctua L9i cooler, ordered 4 drives for NAS which will be ideal for the 4 bays.
        REPLY ON YOUTUBE

      165. The N4 looks pretty but its performance is worse then N3 my favourite still is the N2 after modding you can install a thicker fun on the back and SSD cage on the side after removing the hex key.
        REPLY ON YOUTUBE

      166. This box design is quite schtewpid, innit ?

        I don’t see why would anyone choose this case over a N3. MATX support is useless if you can’t fit large cards, just stick with ITX.

        I think a Define R6 (or XL if you need more drives) is cheaper and you can slightly mod it to fit a SAS backplane with the proper SFF connectors.
        REPLY ON YOUTUBE

      170. Another great presentation on a NAS case, well done and thank you for all your videos. Personally, I would like to see an Unraid installation on this Jonsbo N4 case. I have watched many of your presentations and was seriously considering the Jonsbo N3 case for my NAS solution. However, delivery delays and the PSU being a 1U limitation meant that the SFX PSU I already had available could not be used. In the end I plumbed for a Silverstone CS380, with my Corsair 850 FSX PSU, ASUS micro ATX motherboard, 16 Gbyte DDR4, AMD Ryzen 5 5600G with on board graphics and a low profile Noctua cooling fan I had as a spare. Twin 2.5 G ethernet ports and a 8 port SATA card in the PCIe slots. I used Unraid as it was the only one to support different disc sizes in the storage pool and has ZFS, so storage wise 18 Tb parity disc, 18 Tb, 16 TB and two 6 TB HDD, two 2Tb NVMe drives, One 2TB SSD Cache pool, one 2TB SSD RAID 1 cache pool. So, I would love to see how this N4 setup compares with my CS380 NAS using using Unraid, different HDD sized discs in the storage pool with ZFS and maybe multiple cache pools with the NVMe slots. I will be intereseted to know what the cabling is like to get maximum use out of the available slots.
        REPLY ON YOUTUBE

      171. I just built mine with a Audheid K7 8 bay, cheap but I like the drive bays, and aesthetics. Sharp edges, light weight, cooling options could be improved, but over all, I liked the 1u flex power supply, as I purchased a eco bronze efficiency PS.
        As my other server is an older dual Xeon 600watt dual power sully, that can double as a space heater, even at idle.
        This one can run 24-7, at 75watts idle before the 8 drives spin down to standby.
        I was looking for an ATX option before deciding on the eco option.
        REPLY ON YOUTUBE

      172. I own this case. Some issues are: My 24-pin atx cable from my Corsair SF750 is slightly too short to make the run on the w680ace mobo. The aforementioned 4-bay hotswap instead of 6 is not the end of the world. Half-height cards aren’t the end of the world either. The good thing about this case is it looks amazing. 12600k CPU temps with the Noctua L12S (Low profile mode) are great, I have only seen it go to 44 degrees under load. 4 8 TB drives only stay around 41-44 degrees with Noctua fans at 840rpm. I’d say it’s a good chassis if you don’t mind the small footprint and only 4 hot swaps.
        REPLY ON YOUTUBE

      173. I’m almost positive I saw a a full NAS advertised that used that same case! I bet they made it for somebody and decided that since they had all the tooling set up they might as well release it under there own name.
        REPLY ON YOUTUBE

      174. They just copied another Chinese NAS case called the “Treasure Box”, which has eight 3.5inch bays and MATX motherboard.

        The Jonsbo NAS cases are really not that great, and not priced competitively. There is another case called the “Sagittarius”, also eight hotswap 3.5inch bays and MATX and retails for CN￥349 which is about US$48.
        REPLY ON YOUTUBE

      180. i watch other video and it has backplane on each 4 bays. you can search this video ” Finalizing my NAS build based on the 9-bay Chinese motherboard and case ”
        REPLY ON YOUTUBE

      181. i got so excited for a moment thinking that the n4 had space for more 3.5″ drives than the n3. I’ve been waiting for a bigger n3 for a while now and i’m so close to pulling the gun on a node 804 instead
        REPLY ON YOUTUBE

      182. Oh god, if I try to buy this case I’ll get it end of May…. And it’s 170 Dollars with the delivery to boot. It’s a beautiful case, but I’ll pass. Do try to make a OMV machine with it, should be fun.
        REPLY ON YOUTUBE

      185. I’d like to hear how loud is the N3 case. The bottom fans (2 of them) are 100mm, compared with the N2 which has a single 120mm fan. The top fans look to be 80mm (or smaller). Won’t these get loud? Also, can you use a fanless PSU (e.g. SeaSonic SS-400FL2)?
        REPLY ON YOUTUBE

      186. Hello, thank you very much for the video, the truth is that I am very good at the topic of NAS, I usually pay for Google Drive but I am already spending 350 dollars a year, and I have seen or am considering the option of a NAS but I wanted to ask you something very specifically, I hope you can help me: Let’s see if the NAS is useful for what I want: we have photographers throughout the country of Colombia but each photographer is in a different city, I want to assign them a user and an amount of space and that they can only enter their space and with your user and they cannot see what others do, is that possible? Ty so much for your time
        REPLY ON YOUTUBE

      188. Great experiments! May I ask What’s the power consumption of this DIY NAS? Also if we don’t mind put the power block into the case, can I use my old pc regular power block to power up this DIY NAS? Many thanks!
        REPLY ON YOUTUBE

      190. In the days of lore, way back, when Drobo first appeared and later all the little NAS boxen were born; I decided that they were too expensive and way under-powered. Then I found a way to build my own home lab NAS, one where I could host containers as well as serve shares, etc. This predates Unraid and TrueNAS. Many pros were building rackmount 4U servers but then came along some very well suited m-ITX server boards. Supermicro, Asrock, Gigabyte, etc. The first build utilized Joyent’s fork of OpenSolaris and their base image called SmartOS, providing ZFS, Zones, networking, etc. in a private cloud. Then Linux became capable of the same (Joyent was bought by Samsung and development slowed). I switched to Ubuntu Server with LXD to manage native containers and VM’s and Microk8s for Kubernetes. I was even able to import my zpool. But now I am thinking I may switch to TrueNAS Scale and build a 3rd generation NAS with a Jonsbo NAS case. Newer m-ITX boards have come a long way. The advent of those M.2 PCIe SATA adapters, will free up the 16x PCIe slot allowing for dual 10GbE network card. Ultimately, home builds can be built for less but if you put a bit more power into the build, you get a lot more out of it. However, you will end up being more expensive but your NAS will be more of a home lab server.
        REPLY ON YOUTUBE

      194. Little late to the party, but they give you more than enought rubber grommets for the drives that you can use four on each drive plus the pull on the front of them.
        REPLY ON YOUTUBE

      195. I have the same NAS case, and I’m curious about your hard drives’ behavior. Mine are always active and noisy, even when not in use. Do you experience the same issue with your setup?
        REPLY ON YOUTUBE

      198. Would you make an episode about what’s better? UnRAID or TrueNAS? What gives more possibilities? What is updated more often? And what, in general, will be a better solution?
        REPLY ON YOUTUBE

      201. I have been using this case for a couple months for my Unraid server which hosts PLEX. It’s an amazing case. I use an Intel 12500t which is pretty powerful for my needs and low power usage but I also have an RTX 3060 in the case because I got a really good deal on it and use it to auto convert media to be more compatible with families playback devices. It’s overkill but it’s awesome and this case handles it all fine. The GPU gets fresh air from the side vent and I added two 80mm Noctua fans to the top back for exhaust so they pull in air from the front and sides which gives fresh air to the CPU cooler and gets rid of all of the hot air in the top section. This little case for me holds 164 TB. 160 in HDD(8x20TB) and a 4TB Sata SSD for a cache drive and for Unraid/PLEX meta data. I could use an M.2 for cache but it’s not needed.

        I have my PSU so it pulls in fresh air from the front of the case and exhausts it out of the side and for the extra data ports I used an M.2 to SATA adapter. it has 6 additional SATA ports so with all of what I have I still have an available data slot.

        If you want a great case for a NAS or home server and want to keep it pretty small, this is the way to go. There are smaller options but this one has the benefit of amazing cooling performance…at least for a NAS case.
        REPLY ON YOUTUBE

      202. Thanks for the great info. 
        I have just built my home made NAS based on this tutorial with Unraid and it is spinning away happily on my table.
        I deviated slightly by going with the Node 304 case which I purchased locally from eBuyer for £74 delivered and the same board with 4 GB memory and the 128 GB NVME from Amazon for £151. With the saving I also added a 10 Gbe PCI card from Ali Express for £71 and a Hisource 4 port 2.5 Gbe + 2 10 Gbe uplink ports for for £29 from Ali Express
        I have to admit that getting the 10 Gbe link working with Unraid (!***!) was a bit stressful, but everything now works as it should.
        Onwards and upwards and thanks again.
        REPLY ON YOUTUBE

      205. I have two Lacie. One in my office and one at home. Can you do a video on how to link these two so that they act as backups of each other? If you already have done something like that, please send me that way.
        REPLY ON YOUTUBE

      209. Anyone using jonsbo n3, the height clerance is 298mm, does this include the bottom rubber stand. Would like to know the rubber can be unscrew out to make it lower than 298mm.
        REPLY ON YOUTUBE

      210. Thank you so much for this detailed video. I used it for my own Jonsbo N2 build and it was so helpful with the step-by-step instructions and guidance on the gotchas. It saved me so much time to pre-plan. Excellent video!
        REPLY ON YOUTUBE

      215. Hey, as this vid is 4 months old, I just wanted to ask if the mobo is holding out good? I’ve been considering it myself, just wondering if theres anything you found out later that someone looking to buy one may want to know before making a decision. Cheers for the good vid ????
        REPLY ON YOUTUBE

      219. While I get the confusion about several different screws types used, I do generally appreciate hex screws.
        Phillips is a nightmare waiting to strip. For me it could all be torx haha
        REPLY ON YOUTUBE

      221. HI, Great vid! I must have watched this a few times now, and am currently building my own. Currently unable to track down the pdf for the header pin layout. Did you ever add the link in for that?
        REPLY ON YOUTUBE

      222. Does anyone know anything about the SATA Power Connector on the back plane? I can see the 2 molex connectors powering the drives, but is the SATA necessary or just in case a power supply only has on molex. I’m confused. Jonsbo has answered all of my questions, except that one and of course the instructions are……well you know.
        REPLY ON YOUTUBE

      223. The vibration absorption with the four padded feet is superior to the silicone pad. Also allows air to circulate under the unit for additional passive cooling.
        REPLY ON YOUTUBE

      228. Am not sure whether to lean towards the N2 or N3 ???? probably go with a ROG mini-ITX board and smash in a decent Ryzen processor and bags of memory as-well. Wish to have something that can leave on 24/7 that will run Proxmox to cover all my needs ie. PfSense/OPNSense, Storage and probably a mail server. Would welcome your thoughts please and keep up the great work ????
        REPLY ON YOUTUBE

      233. This video is really well done. I have been trying to give an answer to this question for four years now. The problem is summarized at the end of the video. My time costs much more than what I save by building it myself “from scratch”. But on the other hand I am too stingy , and I like to build things myself. Frustration.
        REPLY ON YOUTUBE

      234. Have we figured out the power plug weirdness? I am also doubtful that three plugs are required, what makes the most sense to me is one dedicated cable plug for molex, and one dedicated cable plug for sata since most modern psu will only have one cable for molex, i have this on order and want to try it but it seems everyone just plugs in all three
        REPLY ON YOUTUBE

      236. I’ve got a fractal Node 304 running a socket 2011-3 xeon, 64gb ram, and all 6 internal 3.5″ slots populated. I wish I’d have known that the Jonsbo N3 was either a thing or going to be a thing before I put this thing together. I had to get very creative with the SATA power and data connectors in the 304 to keep from running them into my Noctua fan on the cpu cooler. And even with a fully modular PSU the cramped space makes me hate it. There’s decent airflow between the drives and towards the CPU fan but.. that gives time for the drives to heat the air on the way to the CPU. Not sure if that’s a big deal or not but the thing is running well enough.

        I’m half tempted to tear the whole thing down and stuff it into an N3. Especially with the addition of the drive status LED’s and two more SATA bays.
        REPLY ON YOUTUBE

      237. I am kind of sad that I got this case now. Looks like I am stuck with max 4 drives if I want to do 10gb fiber NIC. I tried to find a way to do bifurcation that would allow 10gb nic + the 8 drives sata. I did buy an NVME to SATA but only support is 3.0 and its rather slow when booting. Not sure I really trust it either for the long hall that would allow 8 drives to be used. But then you loose ability to do mirrored cache pool. Just every little road block that makes this thing not ideal and as stated having it in a bigger form factor would be way better. It would be nice if you could do the ultimate Jonsbo N3 build and show us how to overcome what I perceive are limitations. Support all 8 drives, 10gb network and dual mirrored NVME cache pool.
        REPLY ON YOUTUBE

      241. The price of the shipping from Aliexpress not only varies, but can make or break your budget so it should definitely not be left out. For example here are the prices as of Nov 2023:
        Jonsbo N2 (Aliexpress): $93 + $97 shipping to the US = $190
        Jonsbo N2 (Amazon): $150
        Jonsbo N2 (Newegg): $140

        Jonsbo N3 (Aliexpress): $117 + $99 shipping = $216
        Jonsbo N3 (Amazon): $170
        Jonsbo N3 (Newegg): $162

        As you can see, if you are in the US it’s a no-brainer to buy the case from Amazon/Newegg as Aliexpress offers an inferior shipping experience.
        REPLY ON YOUTUBE

      247. Imagine they would’ve gone for mATX – its entirely possible in that size and they come with up to 3x PCIe Ports and sometimes 6 SATA ports too …

        I also really don’t like how they’ve not even tought about the possibility of someone using these slots for 2.5 inch e.g. for SATA-SSDS.

        A backplane like this makes it really hard to use without any kind of attempt in proper design by the manufacturer (port multipliers, adapters, what gives, what takes … in the end you can only remove the backplane). For me these two points make these sadly a hard pass 🙁 – as I would gain nothing from those extra 3 slots.

        Who in the world uses just 8 mechanical drives. SSDs are so much better for many things (power consumption too), and are nothing special but more or less a given use-case for many of us looking into slowly adopting many parts towards flash storage as they become cheaper and cheaper …
        REPLY ON YOUTUBE

      249. 0:09: ???? This video compares the Johnb N2 and Johnb N3 systems, highlighting seven important differences.
        3:33: ???? The video discusses the features of two ITX motherboards that support M2 mvme slots and have multiple bays for storage.
        5:58: ???? The video discusses the differences in vibration dissipation and ventilation between the N2 and N3 systems.
        9:14: ???? The N3 system has better active and passive cooling capabilities compared to the other system.
        12:12: ???? The video discusses the placement and functionality of an internal PSU in a computer case.
        15:31: ???? The video discusses the importance of CPU heat sinks and fans in dissipating heat and the limited space for expansion cards in ITX motherboards.
        18:42: ???? The Jbow N3 case offers more space and better compatibility for larger and more powerful PCI upgrades compared to the Jbow N2 case.
        Recapped using TammyAI
        REPLY ON YOUTUBE

      251. Which diy NAS would you recommend to someone who is going to use it as a Jellyfin server for movies and transcoding movies to phones. Also might use it to hold basic documents/photos.
        REPLY ON YOUTUBE

      253. I love the Jonsbo N2 and N3 builds but if you’re running RAID-6 you really want a minimum of 8 x 3.5″ drives not just 5. Are there any good NAS cases for this?
        REPLY ON YOUTUBE

      255. Can you confirm that the Asrock mobo will allow 4x+4x+4x+4x lane bifurcation? I cannot confirm it, and the HyperCard requires lane bifurcation to work. An ixt board with two onboard nvme drives plus 4 drives through pcie would be a killer compact, all flash, low power, portable nas.
        REPLY ON YOUTUBE

      258. Hello, first thanks for the amazing help. You have me helped to decide building my own NAS. But I have a question. I have bought a Jonsbo N3 case. But there are no cooling fans behind the case. Can you tell me which fan coolers I can use for the Jonsbo N3 case on AliExpress ? Because it was not clear in the video !!!
        REPLY ON YOUTUBE

      262. Just a couple notes on this as I have the same case. First if you did NOT use the angled sata cables on the backplane they won’t warranty the case. Second I found a flat dual molex adapter that saved me even more room. Between the angled sata cables (same slim blue your using with 90 degree one end), and the molex adapter I was able to replace that loud inefficient 15mm fan with the standard 25mm one. Also replaced those grates on both side with basic wire grills. Both those things got me better air flow as well as less noise.
        REPLY ON YOUTUBE

      265. Hi there! Has anyone used one of those china boards a little longer? Can they be trusted the data to throw at them in the long run? What is your opinion?
        REPLY ON YOUTUBE

      268. i’m a bit disappointed, your title said you were gonna build a NAS, but you just assembled a NAS :/ (i was expecting electronic component tinkering, not computer parts tinkering…)
        REPLY ON YOUTUBE

      269. I have just built a TopTon board (Same version) with a Jonsbo case. One note is you can actually fit that board out with 64Gb Mem so Truenas has plenty of spare capacity. I also spec’d out a lot better power supply just for the peace of mind. Wish you had done this review earlier as I would have gone with the case you had.
        REPLY ON YOUTUBE

      273. Looking forward to your N3 build with the i9 mobo – I am planning a very similar build and would love your feedback on the setup (power draw, performance, etc).
        REPLY ON YOUTUBE

      276. The limitations and drawbacks of this N3 case as you outlined really shoots some major holes in the feasibility of this DIY NAS. Looks like I’ll be sticking to my Synology 8-bay or Asustor (for cheaper 2-6 bay setups) units for awhile longer it seems.

        If Jonsbo ever does a N4 with the fixes/limitations worked out…maybe then I’ll start weighing a “might-try” then. Probably a year or two more wait, I guess…with also more stability with pricing and availability to come as well. Cheers.
        REPLY ON YOUTUBE

      277. I’m a little confused… Did you show the correct extra parts (Re: video ~35:00)? Of the four parts shown, it seems that I would need (1) of the parts shown (top & bottom right side parts), but nothing from the left top/bottom parts. Additionally, if I select either top or bottom right side parts then I now have (2) 20-pin connectors (one from the front panel USB and one from the adapter (top/bottom right side parts)) which now need to go to a 20-pin + 20-pin splitter (not shown on your display of parts). Unfortunately, my Topton MoBo has not arrived yet so I can’t reference what is there in order to understand what’s what with all the parts you showed. Can you provide any more clarity to this? Thank you so much and thanks, again, for making this very informative video!!!!
        REPLY ON YOUTUBE

      280. Investing that much time and effort probably isn’t worth it unless you have time to waste or very specific possibly high-end applications.
        Also, you may want to got get a more current ITX board + CPU for more performance and RAM in this case.
        Honestly for a simple setup like that it probably is better connecting something like a TerraMaster D5-300C or ORICO-NS500RC3 to a Raspberry Pi.
        REPLY ON YOUTUBE

      281. I dont think you save so much time going turn key as you have to learn the software. Easiest is take an old machine, install Nas software learn how it fits in your life. Then upgrade hardware later. As a person whos built many computers, the hardware part wasnt the issue. Learning the Truenas/Proxmox/Unraid interface probably didnt take longer than the Synology interface. Now I have a machine which can grow cheaply if needed.
        REPLY ON YOUTUBE

      283. Those front USB connectors are standard, USB3 and USB3.1 for the Type A and Type C connector respectively, and are found on most modern motherboards. That Topton board is made as cheaply as possible, so it only has basic USB2 connectors, which is why they wouldn’t fit.
        REPLY ON YOUTUBE

      285. Totally a great replacement for another orange channel. You explain everything that you had to go through and other options to tackle those issues. Great vid! It s subscribe for me bud!
        REPLY ON YOUTUBE

      288. I’m coming back in to re-review my overall thoughts on the N2. This past week I updated my hardware so I could utilize NVME, 10gbe and the 8500T cpu I had laying around.

        My reports – This case is not enjoyable for heat when thinking about NVME. My initial thoughts was that everything would be great. I had a proper cpu cooler and then also a heat sink for the nvme. Upon firing up everything looked great…..but then I got warnings. My NVME was getting to temps of almost 60c!

        I quickly shut the system down and pulled the shell off to make sure the heat sink was alright. Everything seemed just fine but after further thought I have always had airflow over the basic heatsink which make a bit difference.

        So what do I do?

        Luckily I had either a 140mm or 120mm BeQuiet! Silent Wings 2 fan laying around and jerry rigged it to the top shell and decided to blast the entire mobo with the airflow. CPU is sub 35c and the NVME is now sub 34c.

        Users Wanting NVME beware and reminder you HAVE to have decent airflow. The N2 simply is not great for airflow with NVME or other pcie adapters that generate any kind of heat.
        REPLY ON YOUTUBE

      291. 34:29 I see where the 3.1 connector is different, but what’s with the 2.x? Also the ali link for Topton doesn’t seem to come with ram or ssd anymore?
        REPLY ON YOUTUBE

      293. I’m doing a hypothetical nas build that I’m gonna build once I have the finances, and the jonsbo cases were super interesting to me. I wanna use an intel 13th gen, the 13500 specifically, and this video convinced me to get the N3, as well as having more drive bays, the possibility for more storage later is alluring, especially given that it’s relatively not much more expensive, I think it’s a much better pick than the N2
        REPLY ON YOUTUBE

      294. You could also consider the Fractal Design Node 304 for a 4 bay unit which has sufficient room for a small GPU card and standard ATX power supply.
        Space is tight if you select a fairly powerful CPU and large air-cooling device. Temperatures are brilliant with 4 noctua fans.
        REPLY ON YOUTUBE

      296. Great review. I bought this case, it took a very long time to arrive, but when it did the things you pointed out on video is what I felt too. I think the bit of this case that annoys me the most is they use 100mm fans at the back (bottom) and 80mm at the top. 100mm is a odd size, to the point you cannot really buy fans. As in noctua dont make a 100mm. Moreover, I agree with no caddies, dont like the rubber bits. Also the hdds do rattle a lot, so dont feel its that well dampered. I would say its a good case for the money, 8 drives. But I wish the cooling was on the drives, not at the back, which means drives dont get great cooling. Overall, 6/10 for me
        REPLY ON YOUTUBE

      297. according to Topton, the pin headers on their motherboards (N5xxx and N6xxx) is only USB 2.0, were you able to confirm/deny it? The blue ports on the mobo however are indeed 3.x
        REPLY ON YOUTUBE

      300. 12:34 my solution was picking up an M.2 to 5x SATA thing when picked up the Erying board.. seeing as it has 2 m.2’s.. 1 for a 120 GB boot drive and one for SATA ports..
        REPLY ON YOUTUBE

      303. Apparently the official jonsbo line on the molex and sata power connectors on the backplane is that all 3 need to be used when all 8 bays are populated.

        In terms of fans noctua nfa9 92mm will replace the jonsbo 100mm ones at the bottom, and nfa8 80mm will fit at the top.
        REPLY ON YOUTUBE

      304. So, do you have the full sata bandwidth available on this system ? If you’d put sata ssd for example, would you be limited by the pcie lanes of the celeron ?
        REPLY ON YOUTUBE

      305. Hi. I wanna. Hold a NAS for holding my media. No need to transcode and I’m using a Zidoo player in each of my rooms. Would the budget n2 build be ok for that. 4k rips etc
        REPLY ON YOUTUBE

      308. After my sick build I had to tear it all down I had to add the Noctua NH-U9S black as it just fits and is a tower design which works better with the Noctua fan Swap I did.
        REPLY ON YOUTUBE

      309. Am I the only one, who is not completely in line the with the choice of SFX psu for those kinds of machines? These home nas machines mostly run at idle/ with a pretty low powered cpu. 1. The PSUs are quite big and use up space that could otherwise be used for additional HDD. 2. They are often 300-400W in power. Which is quite overkill for for example a i3-12100 and 5 HDDs. I think the use of a pico PSU + good quality power brick would be a more sensible choice. What do you think?
        REPLY ON YOUTUBE

      310. I really like the N3 case but Mini-itx motherboards seem so limiting. I want something to last 5 years or more. I’d like to start out with something with 2.5G/1G built in networking with the ability to add a GPU on a PCIe slot later. I can only find Mini-itx boards with a single PCIe x 16 slot. However, I want the ability to upgrade to 10gb networking later. I heard that m.2 slots can be turned into 10Gbe networking but not sure if that is something I should consider. Do mini-itx with 2.5Gb builtin and 2 pcie slots exist?
        REPLY ON YOUTUBE

      312. The nic on the Z690M-ITX/ax is from Realtek and I heard this brand of nic has some issues especially for Truenas and some other Unix varients due to missing or buggy drivers. Is that still true? @nascompares
        REPLY ON YOUTUBE

      313. Excellent video, I bought Jonsbo N2 and installed mini ITX motherboard ASUS H971-PLUS, 5 HDD in raid 5, Core i5 4th gen, 16GB RAM DDR3 and TrueNAS Core, works awesome!
        REPLY ON YOUTUBE

      314. So I bought motherboard from Ali: N6005 and … both Jonsbo: N2 and N3. So far I have only 4x 3.5″ disks but… thinking upgrade N3 is the only option – the mobo I bought has 6 SATA ports and using M2 one can ad up to 5 more. But in N2 there is only place for 5 SATA 3.5″ disk. So if someone does not think more than 5 disks, N2 is more than enough. My complete system reports <50W on AC side - my SFX PSU is 450W - no idea why I bought such big one ;-) Of course why would you need GPU for real NAS - this mobo is not capable for anything else - just NAS. But the NAS one can build either on TrueNAS or... Debian -both will work great - btw on Debian one will have much more possibility to configure - I realised TrueNAS is superb but it is not really for anything but NAS. Much easier to go for Debian if one wants containers or so. Just my 3 cents.
        REPLY ON YOUTUBE

      316. Those dual 100mm fans on the N3 are so dumb. 100mm fans basically don’t exist, I don’t think Noctua makes one etc. There was plenty of room for 120mm fans on a case that size.
        REPLY ON YOUTUBE

      318. I use a fractal design r5, and replaced the external drive bays on the front with a 3 harddrive tray. I have 12 drives in it plus the ssd with the OS. Great case
        REPLY ON YOUTUBE

      319. On a b550-i strix you can easily use a 5sata port m.2 adapter, use it on the front m.2 4.0 slot and use a nvme boot drive on the back m.2 3.0 port and you have the 2slot pcie slot free for a GPU or whatever. And you were complaining about having 4 pegs on the drive to go into the rail….. In your video you are missing the pegs that screw into the middle of the drive to guide it on the rails.
        REPLY ON YOUTUBE

      320. Looking at this the N3 for just a bunch of drives, I initially thought about using 2.5″ SSD’s with adapters in place of the 3.5″ drives. But with the price of NVMe drives nearing the price of 2.5″ SSD’s I am mulling over stripping out the SATA board in the bottom of this case and installing a powered USB hub getting power from the molex on the PSU and installing a bank of individual USB enclosures populated with whatever NVMe drives I choose – connected to the USB 3 motherboard connector. Any thoughts or suggestions or limitations on my idea?
        REPLY ON YOUTUBE

      322. You can use an M.2 breakout card for more SATA connections, for example if you have two M.2 slots or a free WiFi slot the “ChenYang M.2 M-Key PCI adapter” for full length or “MZHOU M.2 SATA Adapter” for WiFi slot length.
        REPLY ON YOUTUBE

      324. Nice review, but if we are looking at these kind of cases, wouldn’t it make more sense to look at cases like the Fractal Design Node 804, which offers much more flexibility?
        REPLY ON YOUTUBE

      325. a.) Yes, the PSU should slide-in from the back. IDK why they mount it inside the case.
        b.) You can get PCIM-Key M.2 to 6X SATA 3 adapter and put it the mobo’d 2nd M.2 slot, if you’re willing to give up mirrored boot drives.
        c.) If rubber drive mounting washers really bug you, print some rails to replace them. Still have to deal with the rubber handle, though.

        Would be nice to know about the SATA power connector on the drive backplane. Also, the maximum size CPU cooler that will fit.
        REPLY ON YOUTUBE

      326. Your point of not being a ATX compatible is a very sore point. Then the build could accommodate a PCI to SATA expansion and a 10 gigabit Ethernet card. This is not good.
        REPLY ON YOUTUBE

      328. Maybe it’s just me, but I would never buy this to do anything other than handle data and I don’t need an ATX motherboard to do that. I use a board similar to the one you used in your N2 build, but it was designed for openwrt and has a N6005 on it. I have the N2 and I’d never want it or the other anywhere near me due to fan noise (it lives in the garage with the car). While I see your point about the GPU vs using a 10gbe card, I’d rather just go with 2.5gbe as I really don’t think my zfs setups would benefit very much and most modern itx boards will have 2.5gbe. I also love the way they do drive mounting as it cuts down on a ton of vibration. Unless you are taking the drives out all the time, not sure why you need a tray. Yes, if I have a drive failure, it will take me more time to change the drive as I will likely have to take the back off to help push the drive out. . but I still really like the rubber mounting system. My only complaint on the N2 would probably be the same for the N3 – fan noise. I guess I’ll have to wait an see how the PSU goes into that unit, but the N3 is a few years away for me.
        REPLY ON YOUTUBE

      329. A few critiques of the review:

        1. It is common for ITX boards to have a front and back m.2 slot. Running a 5 or 6 port m.2 to sata adapter is inexpensive and doesn’t interfere with expandability

        2. I’m not sure (and you didn’t really say) why you are hesitant about PSU extension cables, but as long as it is a sufficient gauge (which it is), it’s fine

        3. You can use any two power connectors to power all 8 drives
        REPLY ON YOUTUBE

      330. I don’t understand the obsession with the ITX NAS cases. Any economy of savings you might enjoy by the DIY nature are absolutely murdered by the limited selection and significantly higher costs ITX mobos present. Give me a full ATX or even mATX any day of the week…

        Personally, my NAS is currently living in a Rosewill Blackhawk ATX case repurposed from an ancient PC build.
        REPLY ON YOUTUBE

      333. In Australia I had to order my unit through Ali Express. Their store is atrocious! The title of the page CLEARLY stated: “JONSBO N3 N2 N1 Mini NAS Case ITX …” but then the ‘colorway’ defaults to “N2 white’. You had to make sure you pick the right unit (N1, N2 and N3) through the COLORWAY! I didn’t check and purchase the N2 instead of the N3 and they refused to allow for return because it’s CLEARLY stated. I would dispute that. Don’t get me wrong, I have no issue with the product itself. I agree with your assessment that the fan size is effing crazy! Who makes 100mm and 80mm fans! Other than all that, I like the case. It feels high quality built, it’s the smallest form I can find on the market to fit 8 HDDs!
        REPLY ON YOUTUBE

      336. Jonsbo seems to make some great cases but the N3 is in a bit of a weird spot for me.
        Though the N3 has some marked improvements over N2, personally I think it is best to either stick with the N2 for a compact NAS, or if you are after more expandability, might as well choose a mATX case for almost the same footprint as the N3 and gain not only more drive slots but also more PCIe slots and usually cheaper motherboards as well.
        REPLY ON YOUTUBE

      338. Well, I think this wasn’t a very good/informative review. More like 25 min of rambling, why this is a very bad case. Is it a bad case though? The conclusion and the vibe I good during the video are very different.
        REPLY ON YOUTUBE

      339. Im rather surprised, that there is no mention of the lack of holes for cooling in the backplane. Those two included fans are going to do nothing without them.
        REPLY ON YOUTUBE

      340. 5:50 The N2 does have drive LEDs, but they’re not visible if you use 3.5″ drives. The backplane has 2 surface mount LEDs for each drive, green for power and blue for activity. If you use 2.5″ drives with a backplane-compatible 2.5″-to-3.5″ adapter, you’ll see diffuse blue flashing through the case’s front as each drive does its thing (the green LED is blocked by the adapter/drive).
        Jonsbo seems to be listening to feedback and improving their designs with each iteration, and I think that’s why the N3 moved the LEDs to the case panel instead.
        REPLY ON YOUTUBE

      343. What about small mATX boards like the ASRock H610M-HVS or H610M-HDV? Both of them are around 2cm larger than a mITX board and they usually fit in mITX cases that are a bit more roomy
        REPLY ON YOUTUBE

      346. you can use a breakout board, like risers to make use of the the 2 slots, i have looked through them, and i came up with a pretty nice idea how to do it
        REPLY ON YOUTUBE

      348. On nas compares web page you indicate the middle/top builds in the cons section higher power consumption, how much more we talking compared to a synology/Qnap 8 bay? considering the price of energy now a days and with these on 24/7.
        REPLY ON YOUTUBE

      352. Can’t wait for the build video. Watched your N2 build video and looked at your guides and saw the N3. I knew I wanted the N3 for my dream NAS.
        As for the issue with the drive pull, perhaps for those with access to a 3d printer, there may be some solutions on Thingiverse or similar sites. I know it’s not something we should be forced to resort to, but it’s an option.
        REPLY ON YOUTUBE

      354. Your unit suffer from the same problem mine has, the SATA power connector is not attached to the harddrive backplane. It is not soldered to the backplane.
        REPLY ON YOUTUBE

      355. @NASCompares – There are M.2 to Multi Sata connector cards as well, and you could get an ITX board with Multiple M.2 or use the internal Sata Drive for OS or a CACHE drive.
        REPLY ON YOUTUBE

      356. The case is good. Its the mobo offering that sucks. All we need is an itx mobo with 10gbit, ecc ram, 8xsata, 2x m.2 and something like N100 for that 6W TDP passively cooled cpu. For… hmm… 250€
        REPLY ON YOUTUBE

      357. I think you miss something about the rubber disk mounts. Certain types of rubber under prolonged exposure to heat can disintegrate. In a NAS case a few years from now, it will go sticky and rot away. What then?
        REPLY ON YOUTUBE

      361. This case is probably one of the best options, but it still has so many problems. That one from Silverstone supports ATX, but supposedly the backplane is shit and the HDD cooling is not good.

        It would just be nice if there was a NAS case with a good backplane, good ventilation for drives, good cooler support, ATX support, good HDD trays, etc.
        REPLY ON YOUTUBE

      362. 8 bay but still ITX board, cable management still a mess(backboard still use SATA connection instead of SFF-8643), terrible PSU options, HDD tray feels terrible.
        REPLY ON YOUTUBE

      364. This may be a language difference, but on this side of the ocean, we call them either motherboard or mainboards. The term card is generally reserved for ‘add in cards’. Additionally, PSUs in weird places is somewhat normal for small form factor cases.
        REPLY ON YOUTUBE

      365. Been waiting for this video after informing you there was this new case incoming.

        Could you not use a nvme sata adapter that has the data ports on them, yh I know it will use the slot up but some itx mb have more than 1
        REPLY ON YOUTUBE

      367. Is there a DIP switch on the backplane to control staggered power up on this?
        The new ones come with it, you can adjust 200ms/400ms/or no staggered on the DIP switch.
        REPLY ON YOUTUBE

      368. your antiquated selection is crap in 2023.
        Fractal Design Node 804 – Black
        MSI PRO B550M-VC WiFi ProSeries Motherboard
        Ryzen 7 5700G 8-core, 16-Thread Processor
        Thermalright AXP120-X67 WHITE ARGB Low Profile CPU Air Cooler
        Corsair VENGEANCE LPX DDR4 RAM 32GB (2x16GB) 3200MHz
        WD_BLUE SN570 1TB M.2 2280 PCIe Gen3
        IBM M5015 Array Card, Megaraid 9260-8i SATA/SAS Controller RAID 6G PCI-E x8
        INTEL Original X540-T2 Ethernet Converged Network Adaptor X540T2BLK
        8×3.5 drives, + 8x 2.5 drives & small cage
        REPLY ON YOUTUBE

      369. Congratulations on the 100K it is quite an accomplishment. Brilliant video. Fantastic presentation. I have a big unraid system featuring a Xeon E3 with 16 bays. but I do EVERTHIING on this. I have never regretted building my own NAS.
        REPLY ON YOUTUBE

      375. Define “better”!

        One of the slower builds I have seen but for next time:

        Step number ONE:
        Test 100% of the components BEFORE cramming them into the case!
        REPLY ON YOUTUBE

      377. Looking forward to the N3 build, as I’m considering doing a build in that chassis for UnRAID or TrueNAS Scale, then I could transition my Synology NAS to being a backup box.
        REPLY ON YOUTUBE

      379. Beautiful build, nicely done, and I love the “on the cheap” side of things (so much, must be the Scottish in me ????) Makes me want to do this rather than get another Synology. I have the skills, but Synology just made things so “easy” that I got lazy. Thanks for the video and congrats on 100K! Here’s to the next 900K ????
        REPLY ON YOUTUBE

      381. WTF the Jonsbo N2 price is double what you paid for, and I’m in continental Europe so if anything I should pay less than you! that’s insane, the price doubled in a month…
        REPLY ON YOUTUBE

      390. I have both N1 & N2. Amazing little cases, I highly recommend them if you want to save space. If you have an old itx pc it can live an incredible second life as a NAS in one of these.
        REPLY ON YOUTUBE

      391. I built one from used parts on eBay, for the magic price of about £187, 10 SAS 2tb drives i picked up for 80 quid, Dell H200 perc 24 quid( needed firmware changing to LSI SAS 9210-8i ), the motherboard (FM2 with 8gb of DDR 3 and 500w PSU) came to together from what someone was tipping, 64gb SSD OS disk i picked up for around 7 quid, eBay again, the only build that was new was the Mini SAS 36Pin SFF-8088 to 4 x 29Pin SFF-8482 SATA Power Cable 0.5m 20 quid, 2 x Molex to 4 SATA power cable 10 quid and a new ATX case from Amazon for around 30 quid, i manage to pick up 6 BEQUIET 120mm fans for 16 quid, i used TrueNas 12 at the time, now been updated to version13, it runs as my SMB and plex server, its on a 1Gb Lan of which i can use nearly all of the bandwidth maintaining 110MB all the time download(single user at a time), at the end of the day, i really enjoyed building it, it was fun, Im planning on building more, good stuff
        REPLY ON YOUTUBE

      394. I can afford to buy a branded NAS, but I prefer to go through similar to what you see in this video, not because I want to appear tech savvy, but because of the drinking involved during and after the build. I especially relish the heavy drinking involved when it fails and I have no one to blame but myself. Cheers!
        ????????
        REPLY ON YOUTUBE

      396. Hi. I built your big NAS build. I would have two questions:

        A) I use Samsung QVO 8 TB drives. Is there anything I have to do / setup because I use SSDs?
        B) Your amazon Link to the SATA-Port Replicator says “Tbkoly Controller Card”, if I use the link it leads to “SaiDian 1 x SATA-Port-Multiplier Controller Riser Card Adapter 6 Gbit/s 1 auf 5 Port SATA 3.0 Motherboard”, there is no Tbkoly Controller Card on Amazon. I couldn’t find one and used the replacement instead, but it didn’t work. It works perfect if only one drive is connected, the second drive does not appear. Any idea, or like a new link to a working port multiplier?
        REPLY ON YOUTUBE

      401. I got the same mobo (justo with the intel N6005)… there’s an internal USB port… just sayin its safer tu put the usb in ther so no one “accidentally ” pulls it out… huge mistake I made with going with a pico PSU… changed it to a 400w… no working fine… thank you for your videos! ther really helped deciding what to get!… went also with unraid
        REPLY ON YOUTUBE

      402. “Best Jonsbo N2 Build for Under/Around £250”
        You need a maths lesson, parts included in this comes to around £300 not £250 (based on your pricing shown)
        Also pricing is a lot higher than you stated form the sources you stated, and you use both £ and $ which is confusing /constructive criticism use one or the other
        REPLY ON YOUTUBE

      403. 49:16 Well I personally usually chek that 127 other things in the BIOS to make sure I don’t have to reinstall the whole system just because I changed something like SecureBoot only after I installed the OS. 🙂
        REPLY ON YOUTUBE

      405. Hey – nice job here. There is also the value of the learning that is in depth – you can also upgrade individual components to go with as you need. The cost of upgrading a turn key is quite a bit larger – you have about the same 2x factor I think. Interesting – worth the hour invested to watch here!
        And congratulations!
        REPLY ON YOUTUBE

      406. I ordered the parts for the 1.000 £ built. Thank you very much! I would have used your amazon-links (I actually did) but Amazon does not want to deliver anything to me. When I ordered, they asked me for a read-access to my bank account till the end of the year. So I had to order elsewhere. I think, you would need an amazon-alternative that is not 4 weeks away from my location.

        But anyway, great built! Looking forward to an five ssd drive nas, with 5*8 TB SSDs ????
        REPLY ON YOUTUBE

      407. It is a lot more work to set up your own but it is so much more powerful and cheaper. There is no comparison really. I used a retired PC and bought a multibay drive caddy.
        REPLY ON YOUTUBE

      408. I just built one for my friend, N6005 + 16 RAM + H6 case + 1 TB NVME SSD + 250W PSU + Unraid Plus, and spent nearly £330.

        Of course, I was building this while in China, so the shipping cost is way lower, but spent another £25 mailing it to UK.
        REPLY ON YOUTUBE

      410. Hey, I’ve been looking for an alternative to my NAS as mine is currently my old gamingpc, which is complete overkill and higher than ideal power consumption.

        Can I as, why this wouldn’t be good to use with TrueNAS at it seemingly fits their hardware requirements.

        I’m a bit new to all this, so please excuse me if this is a dumb question.
        REPLY ON YOUTUBE

      413. I *loved* this build video. So much detail, great explanation, and it is clearly a done with love for this topic. I’d be interested in a similar build video if you can find a low-cost build with drive trays rather than those off rubber-pull attachments.
        REPLY ON YOUTUBE

      416. It’s not just about the time spent. It’s about how much your data is worth. If you’re not thinking about things like patrol reads and notifications on disk failures. Rebuild processes for the array. Those types of things… you can end up with bit rot or data loss when not noticing hardware failures.
        REPLY ON YOUTUBE

      417. It’s so weird to me that JONSBO is a brand of NAS now, when fifteen years ago JONSBO was a line of table lamps at IKEA. (Rather nice ones, too!)

        (Unlike a lot of other IKEA product names, JONSBO does not appear to be a Swedish placename, but there was a 20th Century Norwegian artist named Kåre Mikkelsen Jonsborg so maybe that’s the etymology idk)
        REPLY ON YOUTUBE

      420. When i go shopping for the sheep build on Amazon i get the following prices:
        case Jonsbo N2 = €225
        N5105 Motherboard 8MB RAM/ 128GB NVMe=€221.93
        SATA cable = €14
        etc,
        REPLY ON YOUTUBE

      421. Pretty Nice Video of this build! But the most important question i have is how high is the power consumption ? Is it the same like the Qnap / Synology or is the power consumption much higher because Qnap / Synology did some optimization of their used components ?
        REPLY ON YOUTUBE

      423. “Sorry Captain Planet” you had a few clever comments. I have a Synology DS213 that I now realize is 10 years old but it’s all I need with 2 1TB WD Red drives in hybrid. If I had the need I’d be into building my own.
        REPLY ON YOUTUBE

      424. New to your channel. NASCompares and you’ve never built a NAS from scratch before?! You can build one better than any QNAP, Synology, etc. for less. As for the USB connectors from the case. They match EXACTLY what they are since one is USB 3.0 and the other is USB-C 3.2. There is nothing non-standard about them. The issue is your motherboard only has USB 2.0.
        REPLY ON YOUTUBE

      430. There was no throughput test results ???? Cited MB comprises 1 SATA shared by 5 interfaces. That’s the main drawback for this NAS. Or is it meant to be for the first DIY device?
        REPLY ON YOUTUBE

      431. Brilliant video! This is the best tutorial and guide I’ve seen for building a fully-functional, do-it-yourself NAS. I especially appreciated the step-by-step details, and your objective, brand and device-specific recommendations, evaluations, and critiques of each of the components. The Unraid solution allowing the use of such an enormous variety and size of SATA disk drives is likewise amazing. You have motivated me to take this on myself. Thank you! Now subscribed.
        REPLY ON YOUTUBE

      438. Been down both paths for 20+ years. If I want to impress my peers I build my own servers. If I want to impress my family get a Synology. Played with Unraid to make hardware pass through setups with Windows XP/98 systems and 3DFX and Creative EAX cards and its an ongoing project, fraught with many many issues. They are fun projects, but you will get to the stage that other hobbies call you and a Synology is the way to go. After all, we don’t live forever and the kids will inherit them, so they need something less IT knowledge base intensive.
        REPLY ON YOUTUBE

      439. I’ve been looking to upgrade my Synology to a DS423+ or similar, that’s what brought me here.
        But, from what I could see, this build is just not worth the cost or hassle when I can get a pre-built unit with Synology’s DSM that is basically plug and play. Great if you want to build your own system for the hell of it, but personally I just can’t justify the time.
        REPLY ON YOUTUBE

      440. One recomendation I would make is using a way better power supply like an FSP or Sparkle to enhance the reliability and stability of the build (start with a good foundation) and to turn the power supply around so the vents allow the power supply to suck in cool air and the rear to exit the heat. Most newer motherboard do use the USB3 connectors provided by Jonsbo. The rest of the video is great. Congratulations to your subscriptions! Dr. Dave
        REPLY ON YOUTUBE

      443. Hmm way less money then i thought. Built my own stuff sense my early teens but never looked in to NAS. Now days whit all the data we have on our hands this might be a good time to start my first NAS project. Grats on 100k and thanks for the info.
        REPLY ON YOUTUBE

      444. What a fantastic guide! I THANK YOU!
        I’ve assembled PC last time probably 35 years ago – not many things have changed since then I can see.
        Btw why did you go with 5105 rather than 6005? No big price difference there…

        You have kept the t-shirt but you have changed the watch between the recordings – even 2 times !!! 😉
        REPLY ON YOUTUBE

      445. Great video as always. I was just curious about something in the £500 build with the F CPU. I’ve never used an F CPU but I always thought that it would not boot or display video without a discrete GPU or does motherboard you mentioned itself allow video output maybe through the onboard VGA/HDMI/DVI port? I apologise in advance if it was already answered in other comments or maybe the seagulls addressed it in the video!
        REPLY ON YOUTUBE

      452. some times i think this man live on a boat and has the greatest stabilization software on the planet because the seagulls use him ass a pit stop. good content, i have a asustor and im not fallowing the 123 or 321.
        REPLY ON YOUTUBE

      453. No, thank you for the fantastic video. Hope you hit 200k soon you guys deserve it. Really appreciate the thorough details My one tip would be to invest in a build mat for that poor old scratched table, helps dampen noise, stops things rolling, can be anti static or have a brand logo.
        REPLY ON YOUTUBE

      454. Maybe its where your from, but here in the states, I think most of us would go for a cheap, used Asrock Rack or Supermicro motherboard and cheap used CPU. Will have to jump to matx, as itx server boards are harder to find used. My truenas build is a $100 supermicro board, $35 Intel 7100, 32GB of cheap used ECC ram. Has 3 pcie slots, 1 m.2 and 8 sata ports, 2 onboard NICs and ipmi to play with. Mine is just a file server, so pretty minimal horsepower needed. Pushes 10Gbe easily. Might need something a little newer if running apps/VMs, like an 8th/9th gen Intel with more cores.
        REPLY ON YOUTUBE

      455. Thks Robbie buts I likes your Sabrent DS-UCTB 10-Bay USB 3.2 Enclosure (~US$350) Review a lot better or maybes the cheaper Mediasonic Probox 8 bay USB 3.0 HDD Enclosure (~US$250) ;
        Hey, I heard more from that Sea-Gull than Eddie lately (?Where’s the old Eddie-nator at?)
        Oh, justs-likes the Eddie-nator, that Sea-Gull shows-is quite enlightening 😉
        REPLY ON YOUTUBE

      457. Could you provide a download link for N5105 motherboard technical layout pdf? I’m curious about the details of the various headers on the mobo you used in the build.
        REPLY ON YOUTUBE

      458. When you do the N3 NAS build it would be interesting to find out if the Asrock H610M-HDV Motherboard will fit, it is an m-atx board but is only 19.7 cm x 18.8 cm so might fit and would allow use of both PCIe slots.
        REPLY ON YOUTUBE

      459. Congrats on 100k! This was an interesting video… I look forward to seeing you put it through it’s paces. It’s a shame that the Jonesbo case only holds five 3.5″ drives, though… if it at least held the full 6 that motherboard and cable supported, it might be more of a contender for my next upgrade dollars, once my 4-bay Synology is no longer adequate. (Doesn’t seem worth the money to upgrade and add only a single drive)
        REPLY ON YOUTUBE

      460. I do like these DIY Nas Video a lot. Thank you. Please more!
        How reliable is all that „crap“ from ali express anyway? I have serious doubts that the 500buck build mobo will post without a gpu. And why all that questionable stuff anyway, why not a Corsair psu and a ie msi motherboard?
        REPLY ON YOUTUBE

      464. The SATA cables for the Jonsbo N series cases must have right-angle plugs on one side. Don’t forget that.

        Those Topton (and other names) motherboards seem to be riddled with bugs and weirdly high idle power consumption (still low, but could be lower). Much like their pfsense appliances, they seem cheap and they have the right hardware, in theory, but it seems they have weird behaviors all around.

        Name brand motherboards can be finicky enough. While the chinese ones are cheap, I would not put one of those in charge of my data.
        REPLY ON YOUTUBE

      465. the fact that we can even think of building a DIY NAS for 250$ is great, though at that budget I would really consider buying used (which I understand it was not the scope of the video), in the end CPUs, RAM, SSDs and cases do not really age, sometimes I even buy used HDDs if they don’t have a lot of hours on them and I can pick them up personally
        REPLY ON YOUTUBE

      467. Shame that if you live in Denmark the case costs a whopping 40 quid in shipping (same online shop as the one used in the video for the purchase) while it ships free to the UK, which in reality turns it into a 140 quid case for me = budget build is not really an option….
        REPLY ON YOUTUBE

      470. General advice: do not cheap out on PSUs, to some it might look like a waste of money but consider that the machine you are building has to last many years and will most probably be on 24/7 or almost, the PSU is not only in charge of powering your system but also to protect it, a short circuit or a power loss in the house can harm/kill components or even effect their lifespan if the delivered voltage (by the PSU) is unstable. Also when it comes to cheap PSUs do not trust what the label says, it is normally best to check out what the community’s suggestion is before pulling the trigger.
        Its fine to buy a 25$ PSU, but please consider the downsides, in my view my HDDs and hardware (and arguably data) are worth and extra 20$ even for my low budget.

        The video war really helpful though, will there also be a video regarding the setup (software side)? I’m still hesitant to build my own NAS mostly because I’m not sure how difficult it is to replicate various services offered by synology and qnap (like Synology Drive easily available on PC and Smartphones) and how secure it would be on something like TrueNAS and others
        REPLY ON YOUTUBE

      473. Congratulations on 100K I have been interested in building my own NAS and have been watching your channel for some time now. Tons of information you guys are doing a great job!
        REPLY ON YOUTUBE

      476. I watched this vid and got the Tipton, I can’t work out how to turn down the fan header which seems to run at full whack all the time which is annoying, I don’t see it in the bios only the cpu. Is there another way to control the fan header?
        REPLY ON YOUTUBE

      477. For a future video, I would be interested to know how that Jonsbo N2 case handles the heat of a 13th gen i3 or i5 or i7. Does it throttle badly? Does it cook the drive underneath?
        REPLY ON YOUTUBE

      478. congrats on the 100k I can’t believe you don’t have more. You’ve been around for a long time and have helped tons of people me included. Thank you for all you do.
        REPLY ON YOUTUBE

      482. I’ve built many computers over the years. For me, assembling the hardware is fairly easy, configuring the software/OS is what will be a challenge for me. I have two old synology NASes and they’re ok. I’m looking to upgrade, so having the option to build a new NAS is a good thing to have. Knowing me, I probably won’t build because the software seems like something I would have to invest time into learning (and I don’t have the time unfortunately). The detailed guide on the website is really good and I will be bookmarking it in case I change my mind.
        REPLY ON YOUTUBE

      486. Congrats on 100k subs! I also built a NAS/HTPC (with TrueNAS) in this case recently. For the most part, I love it and would absolutely recommend it for DIY NAS/HTPC builds.

        Regarding the not-so-quiet case fan: if your motherboard has an extra fan header, connect the fan to that instead of the drive backplane. The backplane has no speed control and runs it at 100% speed 100% of the time. But hooked into the motherboard you can set the speed in the system’s BIOS. Mine now runs very quietly while still keeping the drives at 30-45°C (depending on load).

        My only gripes with the case are:
        1/ I wish the shank (the unthreaded part) of the bolts for the drive track grommets were longer so that they could be screwed in tightly.
        2/ Why is the dust-catching mesh only on the side grills of the motherboard section but not on the top grill? It should be the opposite since the top is where most air intake will be happening and the sides would be exhaust (or they could have put mesh on all the grills). I removed the mesh from the sides of the motherboard area and hot-glued a mesh to the top.
        3/ Too many different bolt types for the exterior. One part has Phillips thumbscrews, another has small hex flat head bolts, another has Phillips truss head bolts, and still another uses the standard Phillips hex head case bolts. If those hex flat head bolts were Phillips instead, the whole case could be managed with a single Phillips screwdriver. And the truss head bolts could have just been standard case bolts.
        REPLY ON YOUTUBE

      489. Just to point out the metal thing you call “backplane” is actually called “i/o shield”. There’s a backplane on this case though and that’s the green board on the drive bay where you connect your drivers.

        TrueNAS would’ve worked, although it’d have complained about not enough memory. it would’ve probably been fine though.

        And congrats on 100k subscribers mate.
        REPLY ON YOUTUBE

      491. Actually great to see this option being shown, between an off the shelf ready to go NAS and a rack mounted NAS (but not everyone has the space for 1U, 2U or even 4U racks). I might go down this route next time.
        If you can find one get the Intel N100 board instead, for a little more money (coz it’s newer) it’s way more powerful then the N5105, I’m running pfSense on the Intel N100 as my router, but I haven’t seen a board only version on Aliexpress yet although the search is terrible, it’s just what I’d do, especially if you wanna run lots of containers or CCTV recording, the N5105 can do that just fine, coz I’m doing it on my QNAP TS–464, just thinking more longer term.
        Robbie, one thing that might be worth testing is PSU orientation and temperatures, I see you put the fan facing inwards, would be interesting to see if temps on the motherboard and in fact drives were higher or lower if the PSU was facing out through the case vents, and thinking about after seeing Gamers Nexus test a Fractal Design mini ITX case, if there’s any sound difference the orientation.
        REPLY ON YOUTUBE

      492. Robbie, how about a video where you give us a glimpse of your upcoming videos and open the comments to request videos. I watch a lot of your older videos as I tackle new projects and find that many are out of date due to software updates, many need clarification ( I need the Step By Step Guide For Complete Idiots type instruction), and asking questions generally gets no replies from anyone.
        REPLY ON YOUTUBE

      493. Nice project but some improvements are possible. For example some cable management should be in order in the space behind your fan. As it is now the cables are obstructing the airflow to the Sata backplate. And the airflow is already disputable as it is with such constructions. And by the way: that “backplate” is also known as an i/o shield.
        REPLY ON YOUTUBE

      495. Great video, exactly what I was looking for.
        I would like to point out a detail that was left out about the total cost, standard low budget PSUs normally have abysmal power efficiency under light load which means that the PSU could even pull double the required wattage from the wall (so, half goes to waste because of inefficiency), over a span of 5y this could add up to a substantial difference in the final price.
        (this is based on the fact that normally a NAS comes with a 12V power supply which is designed for that type of load while a standard PSU for PCs has 3V, 5V and 12V rails and the unit normally has its peak efficiency around 50-65% load)
        REPLY ON YOUTUBE

      497. I’ve been thinking about building a NAS myself but conflicted with platform. I want storage but also the ability to run a plex server and a small vm or two for system monitoring and other random things.
        Would a topton N6005 board suffice for this or, do I need to go with a ryzen 5700G?
        REPLY ON YOUTUBE

      502. Great video, and congrats on the 100K although I’m only just finding the channel now. Currently running 3x Buffalo Linkstation units on RAID 1 each and looking for something to increase my capacity/drive use efficiency and this has been a huge help. Any recommended 6x 3.5″ bay cases out there?
        REPLY ON YOUTUBE

      503. “Nas is like” for the ringtone is just sublime! ???? Congratulations on 100K subs! This channel guided me on HDD choices for my Jonsbo N1 NAS. Keep up the great work!
        REPLY ON YOUTUBE

      504. Great Video. I got motivated to build my own NAS, but when I checked out current prices on the recommended parts, I ended up with a $500 shopping cart on Amazon. Bummer. I guess word got out. That’s generally what happens. Still looking to keep the cost to about $250 – $300 . . .
        REPLY ON YOUTUBE

      505. Does any air actually flow out between the drives? I mean, that’s the point of that case fan right?

        Why would you run the OS from the USB stick? Wouldn’t it be considered better practice to use the nvme or the last sata for a small ssd?
        REPLY ON YOUTUBE

      510. I may have missed it, but was there a power consumption figure mentioned for this? PSU efficiency is quite important when you’re leaving something running 24/7! I was tempted to build one with a pico itx psu but daisy chaining power connectors is very frowned upon to get the necessary molex/sata connections!
        REPLY ON YOUTUBE

      514. Nice video, thankyou congratulations to 100k subs. I am horrified by the psu. This thing looks like fire hazard, I would not connect anything to it. Was probably the cheapest shit money could buy.
        REPLY ON YOUTUBE

      515. Wouldn’t it be better to put the power supply the other way around, so the fan is drawing the air through it’s dedicated grill on the NAS side? Or there was a particular reason to not do that that I haven’t noticed?
        REPLY ON YOUTUBE

      521. Fun! Wish I had build it like this myself last year, but that motherboard didn’t exist back then. Man, what a beautiful case. Mine is huge.

        Just as you’ve described, both NAS solutions have their ups and downs. I like both. My Asustor has been nice to me. The ones I built are used to back it up.
        REPLY ON YOUTUBE

      526. Congrats, for lightweight use should of gone Open MediaVault (OMV) nice easy JBOD system. Works really well for my home NAS, and of course it’s cheap and open source.
        REPLY ON YOUTUBE

      530. Another great video, and congrats on the 100K subs.
        You’re gonna have to do A LOT more content with this new bad boy. Detailed setup, apps, containers etc. Can’t wait for more!!!
        REPLY ON YOUTUBE

      534. Im curious about power supply install. Is the PSU fan supposed to be facing the interior of case rather than the “slotted/vents” in exterior wall of case?
        REPLY ON YOUTUBE

      543. Thank you so mutch @Robbie and eddy for the great videos and geting to 100K you both deserve this and more @NASCompares ps how about a DIY nas with a APU 8 or more cores and 32 gig of ram or 16 gig 6 m.2 0r 6 sata ssd`s and a nic 2.5 or 5 or 10 gig so on you get what i mean then plex test it with a vm and prox mox thanks as ever Kenny
        REPLY ON YOUTUBE

      544. The sad thing is that buying a modular PSU and short cables, in order not to have to deal with cable management, would cost more than the entire build.

        I really would ike to see a standard to make PC builds as cable-less as possible. Think about HP and lenovo workstations, or the old Mac pro.

        Congrats on the 100K milestone.
        REPLY ON YOUTUBE

      545. Great video! I’d love you to do a higher spec version of this video and see what you can put together on a £1000 budget. Even if it’s just a demo of what components you’d put together on that budget without the actual build! Would be great!
        REPLY ON YOUTUBE

      546. It’s not the peace-of-mind that’s worth the difference in price between the home built unit and a, say, Synology unit. It’s the support you get on an off-the-shelf unit and, specifically with Synology, it’s the software suite; DSM and all the wonderful Synology packages.
        REPLY ON YOUTUBE

      548. I do not yet have my first NAS. Even so, to my mind, these videos are informative, helpful and entertaining . Well done and Much appreciated. 100K well deserved.
        REPLY ON YOUTUBE

      549. So the total cost in cash terms (but not time clearly) would be in the same order as say a TERRAMASTER F4-423 at around £450. So on that basis what does your DIY approach offer over the prebuilt solution? ????????‍♂
        REPLY ON YOUTUBE

      552. Thanks for the video and congratulations on reaching 100k subs. Definitely a major landmark for any channel.

        I’d be very interested in how this compares to the Storaxa if that ever arrives.
        REPLY ON YOUTUBE

      553. Congrats!
        You’ve read my thoughts with this DIY NAS. But I had some doubts about noise level of each part (PSU fan, motherboard fan, etc.), then got tired of reading reviews for each potential part of this build… Finaly, I’ve bought terramaster and cleaned up my shopping cart at Ali. )))
        REPLY ON YOUTUBE

      556. Robbie, thanks a lot for doing this! I have a couple of questions: (#1) About 23:18 you stacked up all the PSU wires (of the DOA PSU) behind the fan intake guard. Are you concerned about the reduced airflow from the cabling obstruction, and if not, why not? (#2) The RMA PSU came without cables, how did you handle that? One last note, your closing comments on being time rich-money poor and the expertise needed to do all of this are GREAT! So many people just forget about all of that and it’s really important to remember. Thanks again for another very informative video.
        REPLY ON YOUTUBE

      558. Thanks! After being retired for 8 years from IT at a fortune 50 company, I have spent the last 6 weeks watching network and nas videos on YouTube because I got a knee replacement and have lots of time. @Nascompares is one of the better channels and to celebrate thier 100k here’s a tip. If you can afford it, you can too!
        REPLY ON YOUTUBE

      560. Yeah, Roll-your-own!… Here goes, DSM.7.2 with RedPill on Xeon E3-1226, 16GB Ram, 10 Sata ports (6 active now), two NVME drives) and a Four Port 2.5GB LAN. All for less than that NAS board plus its ram!. Oh, Container Manager in 7.2 is just brilliant!.
        REPLY ON YOUTUBE

      561. Greetings from Germany. I also discovered your channel a few months ago and subscribed. Congratulations on 100k subscribers. I like to watch your channel and it has also helped me in the decision which NAS I buy and then landed on the Synology DS 920+. Self-build is no longer an option for me. I used to assemble my PC myself, but that’s long gone. The professionals can still better assemble a system than me and it’s enough for me if I then only perform the one or other upgrade.
        REPLY ON YOUTUBE

      562. Congratulation for you 100k subscribers, well done.
        Just a stupid question. Why did you install the PSU with the fan pointing into the housing instead towards the housing? At least I would have installed it the other way around so that it could freely suck or blow air directly outside…
        REPLY ON YOUTUBE

      568. I subscribed when there were only a couple thousand subs. I thought to myself that this channel would never break 10K because NAS is such a small market. But here you are, 100K. Congrats!
        REPLY ON YOUTUBE

      571. Congratulations mate. I’m a recent subscriber, and I don’t watch every video (I mainly skip the ones on low-end NAS’s like the Synology 225X or whatever, as I know I’ll never get those), but you’ve provided great information and even when I feel I have a pretty different lean on a lot of things, I enjoy it nonetheless.

        And here I was expecting the 100K special would be Robbie embarking on The Great Seagull Massacre of 2023. Maybe an idea for 200K!
        REPLY ON YOUTUBE

      578. Congrats! Pretty soon you can slap a shiny plaque behind you, or maybe make a NAS case out of it!. A channel I run needs just 8k to hit 100k. Man is it slow going once you start watching the subscriber count 😀
        REPLY ON YOUTUBE

      579. This was fun…nice to see you build that in an hour ????

        Would have been nice to use a faster motherboard with more memory that can handle more complex VM duties… This seems like something you’d find in prebuilts
        REPLY ON YOUTUBE

      580. Congrats on 100K subscribers.
        Yeah, I can easily see 10+ hours of build time which at any reasonable hourly rate would easily add $200 to $400 dollars unless one was doing it as a learning experience and was extremely cash poor and time abundant (a student or someone laid off in a severe recession). Reminds me of the old Heath Kits for radios and other electronic devices. Even if one would do it once, would one do it twice, let alone half a dozen times? I am still puzzled by the price disparity between a laptop and a NAS. If I go to my local Target department store I can see laptops from an i7 all the way down to a Celeron. A NAS doesn’t have a large screen or a keyboard why does it cost more to manufacture than a laptop? Or the disparity between a NAS and an Apple Mac Mini. A NAS is brain dead, but has lots of storage, while an Apple Mac Mini has lots of processing power, but little storage and needs a “Time Machine” (which Apple no longer manufactures) for backup. Perhaps there is a synergistic setup between an Apple Mac Mini and a NAS. But, unless there is a new Apple product announcement Docker X86 is crippled on Apple Mac Mini with Apple Silicon (M1, M2, etc) and one is dependent on a limited and aging supply of Apple Mac Minis (which are soon going to lack security upgrades).
        REPLY ON YOUTUBE

      583. I get the budget objectives of this build but personally I’d want a more standardised components setup. Brand name PSU for sure (e.g. seasonic sgx-500 fully modular), a major brand ITX or matx mboard running a recent gen intel (for transcoding ability so no need for gpu) and a matching case to suit either a storage or performance server bias or both. Unraid has the flexibility for sure I have mine on a 12 year old system running backup for other devices as its main function. I was going to throw it out for ewaste otherwise but it got me thinking with the case it was in being about to hold 10 hdds. That’s often the first time you come across unraid when you wonder what do with old hardware after an upgrade.
        REPLY ON YOUTUBE

      587. congrats on the subs! great video. How high are the heatsinks on the mobo? I have an ye olde HP microserver with nice pro-level drive caddies that I’ve been wondering about updgrading for a while. In the microserver the proprietary size HP Mobo has 30mm high heatsinks, and is squeezed in under the drive bays at the bottom. Do any of the BKHD mobo heatsinks/connectors stick up higher than that? Might work if I can urge the microserver case to develop a new hole for the backplane.
        REPLY ON YOUTUBE

      588. Interesting video. But please get your mic off your desk. I listen mostly on headphones and the constant low frequency banging makes the video almost unwatchable. ????
        REPLY ON YOUTUBE

      592. Congratulation on 100K subscribers. Keep it up and thank you for sharing quality contents and mainly your passion to share unbiased info with us! Fantastic job! ????????
        REPLY ON YOUTUBE