Alpha Release of Plex Media Server for QNAP TS-128A, TS-228A, TS-328, TS-1635AX, TS-x32X and more

FINALLY – Plex for QNAP TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X NAS

Good news for anyone who wants to purchase, or has already purchased the QNAP, TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X NAS in the hopes of using it as a Plex Media Server. Up until recently, Plex was not available on these platforms, as the Plex Media Server application did not support the new series of Realtek ARMv8 processors. This cost-effective, yet powerful range of efficient CPU has become very popular in modern NAS yet Plex had not had time to adapt their world recognised media server application for use on this hardware… till NOW. I’m pleased to confirm that Plex is now available for the Realtek RTD1295 and RTD1296 ARMv8 hardware NAS devices. This is a huge deal and I’m sure will come as great news too many of you. However, it is still in ‘Alpha’ and therefore there are some caveats you should know before getting too excited about Plex on your QNAP TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X NAS.

How to install Plex on your TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X QNAP NAS

As the Plex media server application for this Realtek enabled range of NAS is currently as is in Alpha stage of development, it is still not complete and therefore may be a fraction less stable than full releases for other QNAP NAS servers. Additionally, you will not be able to download the Plex Media Server application from the QNAP App Center. If you want to download the Plex media server application you will need to head over to the official Plex forums and access the alpha and beta download area.
Be warned, however, this area is only available to ‘Plex Pass‘ subscription holders. if you have a free Plex subscription, then you will not be able to access the download area and get the Realtek ARMv8 Plex Media Server package for your NAS. It is worth mentioning that the Plex pass only costs around 8 to 10 £, $ and €, and also enables Live TV, DVR Recording, Hardware Transcoding on certain NAS devices and other software advantages that are not available with a free Plex subscription. So, if you already own your QNAP TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X NAS, then this would be a solid investment anyway.

Installation Instructions for Plex on TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X QNAP NAS

Once you reach the Plex Media Server alpha and beta area, you will need to navigate the drop-down menu and select the correct package for armv8 devices. The drop-down menus on the Plex page are updated pretty frequently so don’t be surprised if you can find the name of your NAS instead of the CPU architecture type.
Once you have downloaded the Plex Media Server application for ARMv8 NAS devices to your local computer, head over to the QNAP QTS user interface and enter the application centre.
Once there, look at the top right-hand corner to see an option to upload installation packages to the NAS. Click this option and then click browse, which will open up a window showing your local PC directories. From where you simply need to find your Plex download from earlier and click open, then click ok.
This will install the Plex Media Server application on your QNAP TS-128A, TS-228A, TS-328, TS-1635AX and TS-x32X NAS, and you will be able to find it on the desktop easily. Have fun using your brand new QNAP Plex Media Server NAS!
NOTE – Always remember that you are using an Alpha version of the plex media server application, not a full release. So this may have the occasional glitch or bump in performance. If you have any further questions, contact us below and don’t forget to subscribe to stay up to date on all things Plex, NAS and QNAP!
If you have any doubt about how to install the Alpha version of the Plex Media Server Application on your ARMv8 QNAP NAS, you can use the guides below as each one is for the Realtek, Marvell and Annapurna NAS that this version is plex is for:

Need Advice on Data Storage from an Expert?

We want to keep the free advice on NASCompares FREE for as long as we can. Since this service started back in Jan '18, We have helped hundreds of users every month solve their storage woes, but we can only continue to do this with your support. So please do choose to buy at SPAN, use links to Amazon on the articles when buying to provide advert revenue support or to donate/support the site below. Finally, for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you.
Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

I am sending this data and accepting this Privacy Policy.

Terms and Conditions

Leave a Reply