Complete Guide to Video Editing on a NAS – 2024 Edition

Video Editing over 10Gbe or Thunderbolt with a NAS Drive ā€“ The Easy Way in 2024

Video editing and production, as of 2024, continues to be one of the largest generators of unique and large-scale data. From various sectors like wildlife photography to large-scale movie production, video editing has evolved into a significant business requiring power, speed, and efficiency from its hardware environment. In the past, editing with software like Final Cut, Adobe Premiere, DaVinci, etc., was manageable on local HDD/SSDs or external drives. However, in recent years, the demand for performance due to the size of 4K and 1080p footage has outstripped the capabilities of most internal SATA SSDs and external drives. The industry has since moved to NVMe SSD and Thunderbolt DAS RAID external storage.

In a Rush? Here are the Best NAS Systems for Video Editing that I Recommend:

 

Despite their effectiveness, the cost of NVMe, its limited capacities, and the impracticality of Thunderbolt RAID DAS in field settings make them less than ideal. This leads us to the adoption of 10Gbe and/or Thunderbolt NAS for video editing, which offers several advantages:

  • Editing on a NAS over 10Gbe can provide up to 1000MB/s performance, potentially increased with link aggregation or network interface port upgrades.
  • Editing over Thunderbolt NAS can reach up to 1600MB/s, depending on the chosen storage media and NAS model.
  • Using a NAS allows you to upgrade the connection over its lifespan, enhancing performance significantly.
  • A NAS improves the workflow in video editing with multiple users, allowing simultaneous access with different priorities based on task needs.
  • Incorporating a NAS into your backup strategy significantly reduces the risk of data loss, using NAS backup software for scheduled or live duplications.
  • Remote uploading of raw/pre-production footage to a NAS enables efficient off-site work, ready for editing when you return to the desk.

Editing on a NAS drive, while not as straightforward as traditional USB and Thunderbolt DAS, offers several advantages to network hardware environments and improves the overall workflow. Letā€™s explore setting up a 10Gbe or Thunderbolt NAS for video editing, but first, some important considerations for 2024.

How to Edit Video on a Synology NAS

Video Editing on a NAS Drive ā€“ Important Things to Remember in 2024

Editing on a NAS in 2024 offers more space and potential speed over local/internal SSDs, but there are additional considerations when switching to NAS-based editing:

  • This guide simplifies the NAS setup for easy video editing, but other methods are available for those needing more technical setups.
  • For hard drive use, at least 4 drives in RAID 5 are needed to match single SSD speeds ā€“ more drives equal better performance.
  • 10Gbe NAS devices are affordable, with the best rates from NAS with Intel/AMD CPUs (64bit x86) and at least 2GB of memory.
  • Installing NAS-brand setup software (like Synology Assistant, QNAP QVR Pro, etc.) on at least one PC/Mac system is recommended for easier setup.
  • NAS systems for video editing should ideally be 5Gbe, 10Gbe, or above.
  • Direct Mac/PC-to-NAS connections over 10Gbe, or through a 10Gbe network switch, are options, though they may affect the NASā€™s media speed if multiple users connect simultaneously.
  • For Thunderbolt 3 Mac/PC Systems, simple Thunderbolt powered 10Gbe-to-TB3 adapters are available.

If NAS-based editing sounds like a fit for your workflow and productivity in 2024, proceed with the guide.

How to Edit Video on a QNAP NAS

Video Editing on NAS Drives Guide ā€“ What You Need to Do

These steps will guide you through how to setup editing on your NAS with software such as DaVinci Resolve, Adobe Elements, PowerDirector and more, as well as be applicable to NAS brands such as Synology, QNAP, Asustor and Terramaster. I will try to keep as many of the steps as ā€˜universalā€™ as possible, ut there might be the odd difference between one software brand and another. If you have any questions, scroll to the bottom of the page and content me directly on the ā€˜Free Adviceā€™ section. It is all genuinely free advice, manned by me (so I apologise if I am not ā€˜lightning-fastā€™) and I will help get you all setup to the best of my ability. Letā€™s get the guide started.

Step 1 ā€“ Set Your NAS Up for Storage

Right so, this is probably the BIGGEST STEP! This guide is largely useless if your NAS system is not already set up ā€“ setting up a NAS (eg have it plugged in and ready to interact with, etc) is a whole guide in itself. Luckily I have made several of those in both written and video form. It is important that your NAS system has the following things done:

  • Latest Firmware Installed (generally this is done when the system is first set up automatically, but always check)
  • In the NAS User Setup, create a new ā€˜userā€™ for the video-editing with access to the folders in the NAS that are going to be used in your editing. You donā€™t HAVE to do this, but itā€™s best to leave the ā€˜adminā€™ account separate from this kind of thing, as you want that to be your ā€˜recoveryā€™ if needed.
  • Have your Storage Pool (the RAID) setup and a Volume created. The guides will go into more detail about this for each NAS platform, but I recommend a RAID configuration with at least 1 disk of redundancy (so, 1 disk safety net if a drive breaks/fails) across at least drives. The Volume setup will ask you lots of questions about file systems and Encryption ā€“ those can largely be set to ā€˜defaultā€™ or as your own storage preference dictates.

Depending on your NAS Brand of choice, you can find a guide to setting up your desired system below:

Synology NAS Written Setup Guide ā€“ HERE

Synology NAS Video Setup Guide ā€“ HERE

QNAP NAS Written Setup Guide ā€“ HERE

QNAP NAS Video Setup Guide ā€“ HERE

Asustor NAS Written Setup Guide ā€“ HERE

Asustor NAS Video Setup Guide ā€“ HERE

Terramaster NAS Written Setup Guide ā€“ HERE

Terramaster NAS Video Setup Guide ā€“ HERE

From here you should be ready to start setting up your Mac/PC with your NAS system for video editing over 10Gbe and/or Thunderbolt.

Step 2 ā€“ Create a Shared Folder to Access Remotely as a Mounted Network Drive

Next, you need to create an area of storage on your NAS system that can be accessed by your Mac/PC system and in-turrn, the video editing software you are using. Remember, these steps will differ depending on the NAS brand you choose. First, you need to open up the NAS File Management tool (it will be called File Manager or File Browser).

From here, somewhere at the top, you will find an option listed as ā€˜create a shared folderā€™ or simple ā€˜Shared Folder Optionsā€™.

You need to give this new shared folder a name. It is recommended that you should not use spaces or special characters in this name, as some software might have conflicts with it. Additionally, you will be asked about which volume on the NAS you want the shared folder to be within. Be sure to select the volume where your best-performing media (HDD/SSD) are based.

After this, you will be asked several options (depending on the brand. These will include 1) If you want to encrypt the shared folder (which will lock it to only be accessed within the NAS, but can lower performance a pinch), 2) Do you want to create a task of periodic data health checks (up to you), 3) Do you want to set a storage quota (maximum space this shared folder can accumulate) and 4) Do you want to create storage snapshots of the shared folder to revert to later if needed (again, personal preference).

After this, you will then be asked which users on your NAS can access the shared folder. Be sure to allow both Read and Write access to both the Admin account and the one you created for your Video editing account.

From here, open up the client tool (Synology Assistant / Qfinder Pro, etc) and ensuring that the PC/Mac you are using to interact with your NAS so far is on the same network/10Gbe/TB3, Right-click on the NAS on the available and select the option labelled ā€˜Map Network Driveā€™

From here, you will be asked to provide the login details you created for the NAS. Here you will need to enter the video editing account details you created (or the Admin account), which will then show you the list of available network drives on the NAS

Select the shared folder that you created earlier, then you will be asked to give the NAS folder/drive a letter to assign on your Mac / PC (EG C:/ is the OS drive typically and D:/ is the CD/DVD/BD drive. Just give the drive a letter and then click confirm.

The new shared folder and Drive will now be available and visible on your My Computer / Finder and this is the drive that you will be editing your work on. As long as you connected to this drive via 10Gbe or Thunderbolt, it will allow considerably faster speeds than typical network/gigabit NAS connectivity.

Step 3 ā€“ Copy/Move your Asset Library to the NAS

The next step is quite straight forward. You need to copy or move your existing library of work over to the NAS. This can be done in numerous ways:

Method 1 ā€“ Simply Drag and Drop / Copy and Paste into the Mapped network drive

Method 2- Go into the NAS via your web Browser and Upload directly from the File Manager

Method 3 ā€“ Create a Sync Jobbetweena folder on your PC/Mac and the NAS using the free first-party tools (Synology Drive or QSync)

You will need to make sure that the bulk of the stock footage, music, photos and more that you use on a regular basis are on the NAS.

Step 4 ā€“ If Necessary, Change The Default Media Directory on your Editing Software

When you make the switch from editing video locally on your PC/Mac system and moving onto NAS based editing, the editing software you use (Adobe Premiere, Final Cut Pro, DaVinci Resolve, etc) will still have background actions and preferences that will be targeting your main system when in use. Typically these will be the default directories of when shadow files are created, the default location of where project assets are found and/or where temp files are saved.Each video editing software differs, so the options will be different from software to software. But it is recommended you change these to the NAS, as then the internal SATA SSD in your system, that will typically perform at 350-450MB/s (reported 550MB/s speed reports are based on ideal usage scenarios), will not present a bottleneck when your NAS can get up to 1,000MB/s on 10Gbe and more on a Thunderbolt-enabled NAS.

Adobe Premiere Essentials 2020

DaVinci Resolve

Step 5 ā€“ Optional BUT Important, Create a Job/Task on your NAS for Backing Up your Work Elsewhere

This one is not strictly essential, but I would recommend it. As you work on the NAS with your video editing, you are going to be creating both alot of files. Unlike when you were previously editing on a PC/Mac system and itā€™s internal SSD/HDD (whereupon you could then make a backup onto a USB drive or NAS), the video files you create will be living on the NAS drive ONLY. THAT is a big risk and means you do NOT have a backup. So, I recommend at least a 2 stage backup. That means that your data is in 1 location and then you have 2 more copies of ALL the important data in two more hardware and/or physical locations. Luckily, most NAS devices arrive with numerous multi-tiered backup software options included. In terms of backup options, I recommend one/two/all of the following (methods will differ between brands, but all of the top-tier NAS brands support these):

Backup the NAS Drive to a USB Drive

Backup the NAS Drive to another NAS Drive

Backup the NAS Drive to a Cloud Service

Recommended NAS Systems for Vdieo Editors?

There are ALOT of different NAS options for editing video, but some are more suitable than others. Having a 10Gbe port and/or Thunderbolt is not enough and in order to avoid you spending month unnecessarily, I have listed a few options below that suit different personal budgets and the extent that you wish to edit. Take a look and if you are still in doubt, you can contact me directly for FREE and impartial advice at the bottom in my free support section or on the right-hand side of the page.

 

Best Software and Features Video Editing NAS ā€“ The Synology DS1522+

0-110TB (90TB with Syn HAT5300s) , 5x SATA Bays, 2x M.2 NVMe 2280 (Pools and Caching), AMD R1600 2-Core / 4-Thread CPU, 8-32GB ECC DDR4 Memory, 4x 1Gbe Port, Optional 10GbE Upgrade, 2x Expansion Port, 3-5yr Warranty

Current Price/Availability on Amazon ā€“ $699

Hardware Review ā€“Ā LINK

YouTube Video Review ā€“Ā Watch , Before You Buy Video ā€“ Watch

What I said in my review June ā€™22:

The Synology DS1522+ is a good NAS drive and most business-focused users are going to appreciate what this newer configuration of hardware is able to provide. There was never any doubt in the extent to which this new NAS would support DSM7, and given its architecture, there is virtually nothing in the popular NAS software that this system cannot do. Likewise, having the option of 10GbE on a Diskstation of this scale will be hugely attractive to some, though the proprietary means with which you need to upgrade is arguably less desirable.

The R1600 CPU is a good choice of processor for file handling and simultaneous tasks, as is the 8GB of memory that this system arrives with, plus the potential to ramp it up to 32GB. After that though, the desirability of this system to home users and multimedia users is a little less compelling and with such a large audience of users who look at NAS for their media streaming, the DS1522+ not featuring a more graphically enabled chip will leave them somewhat underwhelmed. Bottom line, the DS1522+ is a solid and full DSM7 supporting system here and you cannot fault the design, internal/external performance and ease of use of this Synology NAS. However, there will always be users wondering why this NAS never arrived with an Intel chip.

SOFTWARE - 10/10
HARDWARE - 8/10
PERFORMANCE - 8/10
PRICE - 8/10
VALUE - 8/10


8.4
PROS
šŸ‘šŸ»8GB of ECC Memory that can be scaled to 32GB ā€“ LOVELY STUFF
šŸ‘šŸ»Optional 10GbE Upgrade
šŸ‘šŸ»Continued Support of Synology Hybrid RAID on this scale
šŸ‘šŸ»4x LAN Ports by default
šŸ‘šŸ»Expandable with another 10 Drives down the line (2x DS517)
šŸ‘šŸ»NVMe SSD Bays for Caching will be very useful with this 5-Bay RAID Storage
šŸ‘šŸ»DSM 7.1 is hands down the best NAS software and services in the market right now
šŸ‘šŸ»3 years base warranty, with optional extra 2yrs
šŸ‘šŸ»Numerous storage service advantages inc. BTRFS, Fast RAID Rebuild and Auto-Repair
šŸ‘šŸ»First Party Hybrid Cloud services with Synology C2
šŸ‘šŸ»Exceptionally good surveillance software included
CONS
šŸ‘ŽšŸ»That CPU is going to divide opinion
šŸ‘ŽšŸ»HDD & SSD Compatibility list is a little thinner than I expected
šŸ‘ŽšŸ»Optional 10GbE upgrade is via a heavily proprietary route

DEAL WATCH ā€“ Is It On Offer Right Now?

Synology 5-bay DiskStation DS1522+ (Diskless),Black https://www.amazon.com/b/ref=dp_bc_aui_C_5?ie=UTF8&node=20941687011 usa USA 15% Off [LINK]
Synology 5-bay DiskStation DS1522+ (Diskless),Black Amazon usa USA 4.58 OFF (WAS 748) [LINK]
Synology DS1522+ 5-Bay Desktop NAS Solution 5x3,5/2,5" SATA HDD/SSD, 2X M.2 2280 Amazon usa USA 120.9 OFF (WAS 888) [LINK]

These Offers are Checked Daily

Best Value SSD Video Editing NAS ā€“ The Asustor Flashstor 12 Pro NVMe Flash Server

0-96TB, 12x M.2 NVMe 3Ɨ1 Bays, Supports 2x USB Expansions, N5105/N5095 4-Core CPU, 4-16GB DDR4 (non-ECC) Memory, 1x 10Gbe Port, 3yr Warranty

Current Price/Availability on Amazon ā€“ $799

Hardware Review ā€“Ā LINK

YouTube Video Review HERE)

What I said in my review June ā€™23:

I cannot stress enough how impressed I am that the Flashstor 6 and Flashstor 12 Pro are priced at $499 and $860, respectively, given the level of hardware on offer here. These are by no means enterprise-grade NAS server solutions, nor should they be thought of as such. However, given the cost of typical fully featured 4x HDD solutions from their competitors and the brand themselves, which often start at $550 and above, it is quite remarkable that the six M.2 SSD system with comparable internal hardware comes in at $499. As long as a user keeps their expectations in line with what this cost versus its capabilities, itā€™s really tough to argue with the price point that these two devices have arrived at on the market. The Asustor FS6712X Flashstor 12 Pro NAS presents a unique offering in the NAS market, leveraging NVMe technology to provide high-capacity, ultra-high-performance storage. The deviceā€™s design, with its rhombus-shaped enclosure and twelve M.2 NVMe slots, sets it apart from traditional NAS devices and offers a sleek and modern aesthetic.

The tool-less drive installation mechanism makes it easy to set up and expand the storage capacity. However, there are some considerations to keep in mind. The limited number of PCIe lanes provided by the Intel Celeron N5105 processor may restrict the performance of high-speed NVMe drives. The single 10GbE LAN port also presents a potential network bottleneck, limiting the deviceā€™s overall network performance. Users seeking maximum performance and network throughput may find alternative solutions better suited to their needs. Despite these limitations, the FS6712X shines as a storage solution for users who prioritize high-capacity storage, quiet operation, and low power consumption. The deviceā€™s ability to directly output 4K video, along with its range of Asustor-approved apps, makes it an excellent choice for media distribution and presentation. In terms of pricing, the FS6712X comes with a price tag of $850+. While this may appear high at first glance, it is comparable to 8 bay drive NAS SATA devices and many of those do not even include NVMe slots or 10GbE. Users looking for a more cost-effective option can consider the Flashstor 6, which offers half the number of slots and 2x 2.5GbE enabled ports for $499.

As the cost of flash modules continues to drop, and larger capacity drives become available all the way up to 8TB (even without QLC), the FS6712X provides an attractive solution for those seeking high-capacity and high-performance NAS storage. While some underlying performance relativity by the end user needs to be factored in and hardware limitations exist thanks to the use of that Celeron to remain budget-friendly, the FS6712X is a tremendously smart move by Asustor. A well-designed NAS that presents a much more confident solution demonstrating the benefits of NVMe-focused NAS devices to an audience that would have assumed such things are way, WAY outside the realms of affordability!

SOFTWARE - 7/10
HARDWARE - 9/10
PERFORMANCE - 7/10
PRICE - 10/10
VALUE - 10/10


8.6
PROS
šŸ‘šŸ»6x NVMe SSD Flash NAS for under $500 - COME ON!
šŸ‘šŸ»Low Power Use
šŸ‘šŸ»Full 1st Party NAS OS Included
šŸ‘šŸ»USB 3.2 Gen 2 10G Connectivity and wide USB Support/Compatibility
šŸ‘šŸ»Very Slick and compact design
šŸ‘šŸ»SP/DIF and HDMI 2.0b Outputs will hugely please the multimedia user community
šŸ‘šŸ»Likewise, Plex Performance is very good for 4K and 1080p conversions
CONS
šŸ‘ŽšŸ»6x NVMe Performance will never be realised because of the Intel Celeron CPU insideĀ and 3x1 Limits
šŸ‘ŽšŸ»2.5GbE x2 is good.. but its still hugely limiting for those NVMes
šŸ‘ŽšŸ»Lack of ECC memory (cost prohibitive of course) will put some serious users off

 

DEAL WATCH ā€“ Is It On Offer Right Now?

ASUSTOR FLASHSTOR 12 Pro (FS6712X) Network Storage Amazon usa USA 16.83 OFF (WAS 848) [LINK]

These Offers are Checked Daily

 


Best Value Hard Drive Video Editing NAS ā€“ Terramaster T9-450 Tower

0-198TB, 9-Bays, 2x PCIe Gen 3 M.2 NVMe 2280, Intel C3558R Atom Quad Core CPU, 8-32GB Memory, 2x 10GbE SFP, 1x 2.5GbE Port, PCIe Slot (TBC), 2yr Warranty

Current Price/Availability on Amazon ā€“ $999-1099

Hardware Review ā€“Ā LINK

YouTube Video Review ā€“Ā Watch

What I said in my review May ā€™23:

Terramaster has really changed the playing field with the T9-450 NAS. I was already a big fan of their latest generation of 6-Bay, 9-Bay and 12-Bay desktop chassis ā€“ providing a pretty substantial amount of storage in a tower design that borrows ventilation methodology traditionally found in rackmounts, but the T9-450 takes this logic and doubles down on it hard. The dual 10GbE on the system means that, despite itā€™s comparatively modest price point (when comparing against similar scale solutions from Synology and QNAP) you genuinely have a solution with the potential to allow you to enjoy every single MB/s or GB/s of your RAID externally. This is further bolstered with additional 2.5GbE ports, m.2 NVMe bays, uncomplicated support of HDDs/SSDs and just generally a very sensible system that shows how much Terramaster has matured as a brand. The TOS software is still not quite up there with Synologyā€™s DSM or QNAPā€™s QTS in terms of ease of use and AAA+ features, but it is definitely a great entry point OS that has tighted itā€™s security since the brand was targetted by a ransomware group (along with other brands, they were affected by Deadbolt attacks) ā€“ it certainly lacks some of the background optimization of itā€™s competitors, but then this is reflected in the budget of the system too.

The internal PCIe slot that has been largely ignored is a bit of a missed opportunity and I am not a big fan of how they have addressed memory compatibility, but overall it is very, very tough to criticise the T9-450 NAS when you factor in the value of the package here. Factor in that you can very easily swap out the OS for many others, and it largely silences alot of the negatives here too. Overall, the T9-450 could potentially be the best NAS that Terramster has ever released and if they continue to address later releases with the same level of hardware value, this could definitely give the bigger names in the industry something of a headache down the road. I highly recommend this system for its value and performance potential!

SOFTWARE - 7/10
HARDWARE - 10/10
PERFORMANCE - 8/10
PRICE - 9/10
VALUE - 10/10


8.8
PROS
šŸ‘šŸ»Surprisingly compact for 9 Bays of Storage
šŸ‘šŸ»Good Middle ground between a Rackmount and Desktop System
šŸ‘šŸ»Dual 10GbE - LOVELY STUFF!
šŸ‘šŸ»Also has support of SMB MultiChannel and an extra 2x 2.5GbE
šŸ‘šŸ»Decent throughput Capable CPU
šŸ‘šŸ»Great RAID Options
šŸ‘šŸ»Snapshot Replication
šŸ‘šŸ»BTRFS/EXT4 Support as preferred
šŸ‘šŸ»A large amount of maximum memory supported (16-32GB - TBC)
šŸ‘šŸ»M.2 SSD Bay inside for caching/storage
šŸ‘šŸ»TOS 5.1 is genuinely good, if not quite as polished/evolved as it\\\'s competitors
šŸ‘šŸ»VERY easy to install TrueNAS, UnRAID, Proxmox, OpenMediaVault, etc (and also easy to reverse)
CONS
šŸ‘ŽšŸ»Secret PCIe Slot - Unused?!
šŸ‘ŽšŸ»Supports ECC Mmeory, but not included (might annoy some)
šŸ‘ŽšŸ»NOT QUIET!

 

DEAL WATCH ā€“ Is It On Offer Right Now?


These Offers are Checked Daily

Best Multi-Editor NAS Solution ā€“ The QNAP TVS-h874T Thunderbolt4 Server

0-176TB, 8-Bays, 2x PCIe 4Ɨ4 M.2 NVMe 2280, PCIe Gen 4Ɨ16 Upgrade Slot, Intel Core 12th Gen i7/i9 CPU, 32-64GB DDR4 (non-ECC) Memory, 2x Thunderbolt4 Port, 2x 2.5Gbe Port, KVM, ZFS or EXT4 Setup, 3-5yr Warranty

Current Price/Availability on Amazon ā€“ $2999-3499

Hardware Review ā€“ HERE

YouTube Video Review ā€“ HERE

In summarizing the capabilities and potential of the QNAP TVS-h874T NAS, released as a late 2023 update to its predecessor, itā€™s clear that this system represents a significant leap forward in desktop NAS technology. Priced over Ā£2500, itā€™s a substantial investment, designed with future-proofing in mind. The TVS-h874T not only maintains the longevity and high-end status of the TVS-h874 but also brings to the table enhanced direct data access through Thunderbolt 4 integration. This advancement, supporting IP over Thunderbolt protocol, significantly boosts connectivity and speed, making the system an ideal choice for demanding tasks such as 8K video editing and high-performance computing needs in business environments. However, the question of whether Thunderbolt NAS is the right fit for all users remains. For those requiring high-speed, multi-user access and scalability, the TVS-h874T is a strong contender. Its support for the latest PCIe 4 standards ensures compatibility with high-performance upgrades, reinforcing its position as a future-proof investment. The software, featuring QTS and QuTS, might require some acclimatization, particularly for those familiar with simpler systems like Synologyā€™s DSM. Yet, the benefits, especially for ZFS enthusiasts, are undeniable, offering advanced RAID management and a plethora of applications and services.

The TVS-h874Tā€™s stance on open hardware and software compatibility is a significant plus in an industry increasingly leaning towards proprietary systems. It accommodates a range of third-party hardware and software, adding to its versatility. In the face of growing concerns over NAS security, the system is well-equipped with comprehensive tools and settings for enhanced security and data protection, addressing the pressing issue of ransomware attacks. In conclusion, the QNAP TVS-h874T stands out as an exceptional choice for businesses and power users who require a robust, scalable, and secure NAS solution. It offers an excellent balance of price, performance, and features, making it a worthy investment for those seeking top-tier server-side capabilities. However, for users with simpler storage needs or those not requiring the advanced features of Thunderbolt NAS, traditional Thunderbolt DAS devices might be a more suitable and cost-effective option. The TVS-h874T, with its advanced capabilities, is undoubtedly a powerhouse in NAS technology, but its full benefits will be best realized by those whose requirements align closely with what this advanced system has to offer.

SOFTWARE - 9/10
HARDWARE - 10/10
PERFORMANCE - 10/10
PRICE - 7/10
VALUE - 7/10


8.6
PROS
šŸ‘šŸ»Only brand rolling out i9 Turnkey NAS
šŸ‘šŸ»Only NAS Rolling out Thundebrolt4 NAS (for now!)
šŸ‘šŸ»Upto 20 Cores, 24 Threads and High End Integrated Graphics
šŸ‘šŸ»PCIe Gen 4 x16 Upgrade Slot for 10/25/100GbE Cards and 2x PCIe Gen 4 x4 M.2 NVMe Slots for 7GB SSDs
šŸ‘šŸ»No Obstinant 3rd Party Hardware Limitations on Support or Compatibility
šŸ‘šŸ»Much larger support of 3rd Party Software Services than most other NAS Brands
šŸ‘šŸ»10Gb/s USB Connectivity, in Type A and Type C
šŸ‘šŸ»Upto 64GB of Memory
šŸ‘šŸ»ZFS or EXT 4 File System Choice
šŸ‘šŸ»M.2 NVMe SSD Bays can be used for Storage or Caching
šŸ‘šŸ»Volume Encryption, SED SSD Support and WORM
šŸ‘šŸ»Enhanced AI Surveillance Services, with opt to upgrade with $30 Google TPU
šŸ‘šŸ»AI Photo Management Tool (QuMagie) Includes Thing Recognition and works offline
šŸ‘šŸ»ALL the ZFS Benefits, whilst also the GUI and App benefits of a Linux Software Platform in one
CONS
šŸ‘ŽšŸ»No Smaller 4-Bay Version
šŸ‘ŽšŸ»QVR Elite (not QVR Pro) only has 2 Cam Licences
šŸ‘ŽšŸ»Lack of ECC Memory will annoy some users
šŸ‘ŽšŸ»10Gbe is Missing (so no TB-TO-10GbE Pass-through)
šŸ‘ŽšŸ»Too Many licenses on Enterprise Tools (Drive Analyzer, Face Tiger, etc) with too few free licenses

 

DEAL WATCH ā€“ Is It On Offer Right Now?


These Offers are Checked Daily

 


 

šŸ“§ SUBSCRIBE TO OUR NEWSLETTER šŸ””


    šŸ”’ Join Inner Circle

    Get an alert every time something gets added to this specific article!


    Want to follow specific category? šŸ“§ Subscribe

    This description contains links to Amazon. These links will take you to some of the products mentioned in today's content. As an Amazon Associate, I earn from qualifying purchases. Visit the NASCompares Deal Finder to find the best place to buy this device in your region, based on Service, Support and Reputation - Just Search for your NAS Drive in the Box Below

    Need Advice on Data Storage from an Expert?

    Finally,Ā for free advice about your setup, just leave a message in the comments below here at NASCompares.com and we will get back to you. Need Help? Where possible (and where appropriate) please provide as much information about your requirements, as then I can arrange the best answer and solution to your needs. Do not worry about your e-mail address being required, it will NOT be used in a mailing list and will NOT be used in any way other than to respond to your enquiry.

      By clicking SEND you accept this Privacy Policy
      Question will be added on Q&A forum. You will receive an email from us when someone replies to it.
      šŸ”’Private Fast Track Message (1-24Hours)

      TRY CHAT Terms and Conditions
      If you like this service, please consider supporting us. We use affiliate links on the blog allowing NAScompares information and advice service to be free of charge to you.Anything you purchase on the day you click on our links will generate a small commission which isused to run the website. Here is a link for Amazon and B&H.You can also get me a ā˜• Ko-fi or old school Paypal. Thanks!To find out more about how to support this advice service check HEREIf you need to fix or configure a NAS, check Fiver Have you thought about helping others with your knowledge? Find Instructions Here  
       
      Or support us by using our affiliate links on Amazon UK and Amazon US
      Ā Ā Ā Ā 
       
      Alternatively, why not ask me on the ASK NASCompares forum, by clicking the button below. This is a community hub that serves as a place that I can answer your question, chew the fat, share new release information and even get corrections posted. I will always get around to answering ALL queries, but as a one-man operation, I cannot promise speed! So by sharing your query in the ASK NASCompares section below, you can get a better range of solutions and suggestions, alongside my own.

      ā˜• WE LOVE COFFEE ā˜•

       
      locked content ko-fi subscribe

      DISCUSS with others your opinion about this subject.
      ASK questions to NAS community
      SHARE more details what you have found on this subject
      CONTRIBUTE with your own article or review. Click HERE
      IMPROVE this niche ecosystem, let us know what to change/fix on this site
      EARN KO-FI Share your knowledge with others and get paid for it! Click HERE

      387 thoughts on “Complete Guide to Video Editing on a NAS – 2024 Edition

      1. Thank you for this, I am so confused as to what to buy
        I am in the market for a 4 bay NAS, currently using an old 2 bay J series Synology NAS
        Does anyone on here have a crystal ball they could check and see if Synology are going to be refreshing their range soon?
        I’m looking to back up several PC’s and interested in installing Plex, which I have never used before
        Any advise, suggestions would be much appreciated
        REPLY ON YOUTUBE

      2. While it is 3 months later and the QNAP TVS-h874T is a very nice bit of kit, the entry level price is eye watering. The UGreen 6 and 8 bay models have Thunderbolt, Core i5, 10GbE and just cost ~$600 and ~$900 USD respectively (if available in your area).
        REPLY ON YOUTUBE

      3. Thanks, great detail in the video, especially around capabilities to mix’n’match storage into separate RAID groups. Any chance you’ve done performance benchmarks using RAID10? I’m a fan of RAID10 despite the storage capacity hit, due to the low impact on CPU and typically higher throughputs.
        REPLY ON YOUTUBE

      4. Thanks, your benchmark result of <800 MB/s sequential write (Overall) is not far from what I am getting. This is a real world performance. Too bad it cannot hit 1GB/s constant write speed. For others who are interested, initial sequential write speed is close to 1GB/s for first 5sec, after that 850MB/s until 30sec, then dropped to ~600MB/s until the end. Testing using 100GB file. One more unofficial fact is this N5105 works with 32GB Ram although intel specify 16GB as max, and Asustor also put 16 max. I do not have 64GB ram to test. The 32GB Ram i have is stripped from my old laptop, ECC 3200 Mhz Ram (also works as non ECC). Adding ram from 16 to 32 does not help in write speed.
        REPLY ON YOUTUBE

      5. i don’t get when i should use iscs over normal shared folders and why i should use different volumes for different shared folders .. why not have everything convenient in one place?
        REPLY ON YOUTUBE

      6. Also found that the QFINDER will not proceed past the third set up screen in version 5.1.4256 – have a called logged with QNAP support but this thing is taking days to set up … what a pain
        REPLY ON YOUTUBE

      7. trying to justify the extra cost coming from a x72xt system. it seems that the bottleneck is still 10gbe or the 10gbe thunderbolt over ip. speeds Iā€™ve seen the 874t do are about the same as what im getting with a x72xt system. am i missing something here?

        im not transcoding or anything just serving file for video editing.
        REPLY ON YOUTUBE

      8. Thank you for this information. I am thinking of the following, may I ask your opinion about that? I am a one person videoproducer and on this moment editing my 4K footage, of live projects, from a SSD with a 40Gbps case over thunderbolt 3 that works fast en stable (read and write speed is around 2000 MB/s). I like to add a NAS as a sync to my system, so it sync the data from my work SSD to the NAS (say every 30 minutes with Carbon copy cloner). The speed of the NAS is then not the big bottleneck anymore, the sync interval is the only risk issue in my understanding.
        REPLY ON YOUTUBE

      9. Would like to add that I pulled the trigger on this. ā€‹ I bought the Synology DS 1522+, 5x8TB in RAID6 for 20.xTB total storage. (I was at only 10 TB with my old Drobo 5N.) Been pretty happy with it in the couple months I’ve had it online. Docker, for sure, but just an awesome interface with the DSM 7.2. Your review here was a HUGE influencing factor, honestly. Knowing what it could do, what to watch for, along with such a detailed review made all the difference. Thank you SO much @NASCompares , and may you have a great new year!
        REPLY ON YOUTUBE

      10. 3:08 I’d prefer leaving my QNAP as DHCP and set a reservation of MAC address in router. You can do it either way, but I prefer doing it in router, as its more central, otherwise you’ve got to go into your devices to manually set.

        If you create a reservation list in your router then the job is done.. No ned to muck around and think “Do I need static on x device or not” but I guess your way gives you more flexibility. if you have many devices

        6:19 btw: QTS5.x bombards you with popups the unless you clock “don’t pester me”. :P. I know manufactures wanna get your attention, but this is not the way to do it

        No wonder people like using popup blockers …. There should be one for your local network too
        REPLY ON YOUTUBE

      11. Is there any option to edit video on the cloud from the phone? Or any option to make the Nas visible in the albums of Capcut so I can edit video on the phone from the Nas
        REPLY ON YOUTUBE

      12. I see you put the system install on the RAID 5 with four HHD. I heard that it is best to install the system onto the NVMe drive. Is this true? I put mine on a RAID 1 on the internal M.2 PCIe NVMe slots but would rather have that space for PC to NAS and NAS to PC file accessing if you think I can just use any pool.
        REPLY ON YOUTUBE

      13. Great video, I love the NAS. I had a question. With this system, what is the best use of the on board NVME drives? I mainly use my TVS-1282 as a Plex device now. I also have a GPU installed that helps with 4k. Would there be any big benefit to using a GPU in this NAS or is that even possible without removing the installed thunderbolt 4 card? Thanks for any help you can offer and please continue making these videos ????
        REPLY ON YOUTUBE

      14. I am replacing a server acting as a DC for a school / nursery and I don’t want to pay windows licences, so I ended up with a Synology DS1621+ to act as a DC and file server. 6 bays is enough, but i cannot really see the need to spend Ā£4k unless you run multiple VMs ( i spent Ā£860 for the box and a 140 quid to upgrade the ram and add 2x NVMEs ). i run 2 windows VMs and a couple of dockers on it without issues, just don’t see how the cost is justified.
        REPLY ON YOUTUBE

      15. yeah well, you could also buy a real server with this money and put in one of those mellanox connect-x 4 25 gbps card in. cards/modules/om3 optic cables are very afforable these days. especially compared to this nas, and then you have a proper real server.
        REPLY ON YOUTUBE

      16. One major issue is that Qnap has yet to adopt to AFP, in my world, I add fast nvme formatted to AFP to use maximum speed, just to realize that I canā€™t connect that media straight to the NAS and use HBS3, instead I have to have my MacX as a go between. Adopting to afp and USB-C at HBS3 one-click port would solve a lot of issues and future proofing the workflow.
        REPLY ON YOUTUBE

      17. After watching a previous video, I bought the h874 ( non – T model ). I run a Windows VM that is up 24/7 . When running a VM like this, is it possible and/or advisable to run the VM off an SSD to keep down the wear and tear on the HDD’s ?
        REPLY ON YOUTUBE

      18. We now have a few of this QNAP model, we opted for the i7 version as the i9 version was needing special-order and thus more time to arrive. We also opted for the non-TB4 version as in our applications, 10GBe is sufficient at the moment.
        Plus TB4 has a few drawbacks; cable-length is rather limited (3 metres) unless you go for the really expensive optical cables.
        Plus with the TB implementation, the QNAP’s really act (almost) as if they are DAS-attached. Whilst that is not really a big issue unless you are using more TB-enabled hardware, than the order(!) of how you daisy-chain the TB-enabled devices becomes really important! (spoiler alert: often you will need to attach the NAS as the last one in the chain)
        I strongly recommend to get a try-and-buy before you opt for the TB-option if that fits your own TB application.
        BTW, the reason the heatsinks are not that big is the fact you do not need bigger heatsinks as one should only(!) put a heatsink on the controller-chip of your SSD’s, not on the flash-chips themselves.
        Yes, a TB4 cable should be included but never has been with any TB itterations of QNAP (we have them all, there were never TB cables included). But then TB cables are not that expensive, you do not need the super-duper extremely expensive Apple version (for example). There are several video’s on YT testing and comparing cheap & expensive TB cables, made no difference. Same goes for HDMI cables, it is digital signals, it often comes down to the quality of the cable and/or connectors.
        REPLY ON YOUTUBE

      19. This is the third time I see you on YouTube, I just subscribed. This review convinced me to keep watching your Chanel and follow your next reviews. Really good video and great review. Thank you so much.
        REPLY ON YOUTUBE

      20. Why don’t most folks doing such into and startup videos recommend Electro Static Discharge grounding wrist bands? Carry over from my mfg days, but we couldn’t get anywhere near equipment or drives without being grounded for ESD?
        REPLY ON YOUTUBE

      21. I don’t mean to spam. I put this in an older video for the same.

        Thank you for the review of this product.

        I have been giving consideration to it and the form factor along with the SSD’s does have an appeal. This would be a home use application that does have SD, HD and 4k movies. There is also a fairly large amount of music files as MP3 and video as well. Other than that, it’s all about data and the combined volume is in and around 7TB. Again; home use two users.

        The question: what Drives of good quality would you recommend? I also understand through reading, the device is RAID capable. Is that part correct?

        In advance, thank you!
        REPLY ON YOUTUBE

      22. Thank you for the very interesting vid! Should you start using , say, six nvme modules to build a RAID 5 system adding at a later stage 2-4 nvme modules would you be able to expand total size of existing RAID without rebuilding it from scratch ?
        REPLY ON YOUTUBE

      23. God I love your videos. I’m looking at a new NAS and this popped up on my search and my first thought was “I wonder if that NASCompares dude has a video about it?”
        Of course at a touch over an hour long, you did not disappoint!
        REPLY ON YOUTUBE

      24. I was thinking of buying an Asustor Lockerstor 8, to connect it via 10GB LAN to three Windows PCs (with 10GB cards) for 4K video editing in a RAID6 with 6 drives and two drives in a RAID1 for backups. Also I will update the RAM to 16 and use M2 drives for caching as well. Is this going to work? Are we going to be ok with editing performance?
        REPLY ON YOUTUBE

      25. thank you for the great review and insights on the NAS products. I’ve been planing to upgrade from my current DS220+ to DS1522+, however I’m concerned that according to Synology compatibility lists, they no longer support any third-party 2.5 SATA SSD drives!
        Do you know if I can still use other SATA SSD brands with the DS1522+?
        REPLY ON YOUTUBE

      26. Itā€™s a shame asussor put such a low powered cpu motherboard combo in there ,I would have loved to see a zyzen aib or itā€™s version also they really missed a trick by not allowing it to be used as a fast access cashe for its larger gen 2 or small business models
        REPLY ON YOUTUBE

      27. What speed I should expect from a DS1821 with 8 drives (drives from 4TB up to 14 TB) +1M.2mvme cache,+ synology pci 10gbE BaseT. Connected with a mac Studio Ultra using a Netgear copper 10GbE Switch and two 10nfoot Cat8 cablesā€¦.. Im farrrr from 10GBe spoed šŸ™
        REPLY ON YOUTUBE

      28. Editing directly off a NAS requires a pro-level setup fully take advantages of that. However, this is overkill for most folks. Instead, just save your original, full resolution video files on a NAS and use local storage for proxies. Even 1GbE is perfectly fine for this setup. Additional networking ability simply speeds up the transfer of the originals. The next level up, if you have the networking setup for it, would be to save your proxies on a NAS too if you are working with multiple editors on the same network. If you are a solo video editor, just stick with local proxies + NAS originals. If needed, grab a fast USB 3/4 or Thunderbolt external disk if your system doesn’t have enough space natively. Those are so much cheaper than going pro with a NAS setup.

        One issue with Thunderbolt is that cables are limited to 2 meters (about 6 ft) at full 40 Gbps. I’d prefer to put my NAS in a closet somewhere so I can’t hear it and use a TB 10g network adapter instead (provided my network is setup for 10g). Granted, that’s overkill for me.
        REPLY ON YOUTUBE

      29. Fantastic video! I’m new to NAS. I want to setup this device with 12 SSDs and make it automatically backup my various PCs on a monthly schedule. Will this unit and its software let me do that? Thanks.
        REPLY ON YOUTUBE

      30. On the market for a new NAS and was thinking about future-proofing the setup. I think some limitations on this machine are in effect to serve a specific niche crowd (the traveler who wants to take their NAS with them). Now I understand that this is why they decided to go for M.2 NVMe drives, I realize now they did not select the M.2 for the performance but to keep the case small. Initially, I wanted this device for its power, but the more I think about it I realize that I’m not the intended audience.

        If the 12-slot machine had a CPU with more cores and a bit better performance it would have been a no-brainer. It would instantly replace my home lab and store my data. But besides that, failing drives always makes me nervous and in the past when rebuilding an array it happened to me more than once that other drives started to fail while rebuilding. Being throttled by the 8 PCIe while rebuilding an array is something I really do not like… Then again, it has SSDs and not spinning disks, so performance should already be improved compared to what I’m used to.

        I really like the choice of a 10Gbit network port and choice for HDMI. M.2 would be awesome if the PCIe lanes were there to support it.
        REPLY ON YOUTUBE

      31. yes absolutely. And OMG what is up with you people discounting this because it doesn’t provide enough gpu transcoding for you, therefore it’s a loser? I had a 220+ which was fine and now the 1522+ and it’s awesome. Plays all my 4K videos perfectly and as well or better than my previous. What is this obsession with transcoding videos when you’re buying a $1000 NAS that does so much more and the new processor does cartwheels around the previous Celeron on the 220+. I mean how many people are watching fricken videos on their phone and flipping out if it buffers? I tested and it works just as well as the 220+ for my needs, no buffering or stuttering and remote play just as seamless. So are there seriously tens of thousands of people using their NAS to share their library and expecting 10 for more simultaneous transcoding streams to all their kids or friends or…. customers? it’s lunacy to see all the complaints about this one feature not being optimized with their choice of a new CPU which frankly is so much faster and efficient on every other task I use my NAS for like video and photo editing on the fly, backing up and accessing Synologydrive, music streaming and everything else. And no problem playing and I guess transcoding a stream when needed. So just STFU with all the negative whiners who seem to have no life but watching multiple streams on multiple phones at any given time, therefore this is a crappy NAS? Give us a break and get a life. It’s an awesome product.
        REPLY ON YOUTUBE

      32. I was ready to go with this NAS to replace my Drobo thinking I would just transfer my 5 Seagate Ironwolf HDDs over until I noticed the HDD compatibility list. Not interested in purchasing a completely new set of 5 HDDs so am looking for a second solution for a NAS.
        REPLY ON YOUTUBE

      33. Thank you for this video, and you are correct about the mistakes editors make. I work in TV Production on the technical side building storage and networks for productions, and 5 years ago decided I would standardize on Synology NAS for my workflow. In the past I built my own servers, and got sick of doing so. I have 18 Synology systems running in our office, so I’m going to tell you exactly what I use. These systems travel to the field when necessary, and we do massive projects like X Games, AVP Volleyball, Street League Skateboarding, and World Series of Poker which is a project that requires recording 45 cameras and storing that on a 3 Synology devices. At peak we are recording 4TB per hour of content at WSOP.

        One thing I do want to point out is that memory is also very important. You need at least 16GB and I have started putting 32GB in as the baseline. Synology typically ships with 4GB of RAM. Also get two sticks of memory. For 16 put in two 8GB modules. For 32, add two 16GB modules.

        Here is what works:
        Synology DS1821+, 32GB RAM, All 8 drives populated for performance, dual 10GbE PCIE card. I use 20TB Drives now which gives me about 130TB usable. I configure RAID 5 using BTRFS.

        Client systems Mac or PC either have a 10GbE PCIE card or we use the Sonnet Solo for 10GbE over thunderbolt.

        I have both Netgear and TPLink 10GbE switches in place and both perform very well.

        Editors are using the Adobe Creative Cloud.

        Connections from the client machines are using SMB.

        One final note. Never fill your NAS more than 80%. You will see tremendous performance hits after you pass that 80% threshold. So plan for that when calculating storage.

        I am not a fan of expanding the NAS. I’ve done it, but I see performance hits. I simply add another DS1821+ when the current one has filled up.
        REPLY ON YOUTUBE

      34. Thank you so much! Do you know if I can set up a custom database service on that device to make it a Davinci Resolve server for collaborative video workflow in DVR?
        REPLY ON YOUTUBE

      35. Do you have a video that highlights the performance issue you are highlighting with ARM based NAS products? Just for kicks I’m editing video using Davinci resolve directly off of my NAS. Seems to work fine for me and my NAS has an lowly Atom processor. Both my ARM based workstation (M1 Max) and my NAS are using 10 gigabit.
        REPLY ON YOUTUBE

      36. Oh. Love your videos! My Drobo 5D just died. And I’m looking to replace it and the guy I’m dealing with is recommending the Synology Raid Storage Drives to two. I’m wondering would you recommend anything else as you mention things about the heat sink etc.
        REPLY ON YOUTUBE

      37. Goodnight. Very good explanation. I have a doubt. If you have 2 disks in RAID 1 and put a 3rd disk. Can I move to RID 5 without losing data or do I have to set everything up again. Thanks.
        REPLY ON YOUTUBE

      38. thanks for your review. I’m about to go for the 12-bay one but I have doubts. It is only for Max studio in 10gb network. could you configure 2x2tb raid 1 (Time Machine) 4×2 raid 5 for Final Cut? and 2×2 raid 1 for Max applications and the nas itself? Could you do it little by little? first system apps then finalcutā€¦. etc (for not having to spend all of one. Would you be able to do that and manage the different raids? Obviously you would look at the ram you have and expand it. Do you know what the Maximum is? I understand it will be ddr4 or dimm 2666? Thanks for your attention
        REPLY ON YOUTUBE

      39. Hmmmmmmm ….. it would seem the simplest means to editing photos/video might be on a local client computer with a large SSD via ‘synology drive’ remote caching.
        The crux question is ?Will fancy photo/video application work-well with synology drive remote caching?
        REPLY ON YOUTUBE

      40. Hello. Great review! Is it clear to the user which SSD slots share a PCI lane? I’m thinking dividing the 12 slots into 3 RAID arrays would maximize write performance.
        REPLY ON YOUTUBE

      41. Nas Master synology should make there expantion boxes cuch as the DX517 . and give then an pci expantion port to put 10 gbe in it i really think they missed out . they could make a fortune
        REPLY ON YOUTUBE

      42. at this point, M.2 are slowly getting cheaper than SATA SSDs, but still with bandwidth limitations, something like four QVOs can do equally well in budget Synology device, with SMB Multichannel enabled speeds would be similar, no?
        REPLY ON YOUTUBE

      43. For anyone wondering (I spent days trying to figure out which method was best). The iSCSI method of creating ‘local drives’ on your PC does not work as a network drive and therefore, other PCs connected to the NAS would not have access to files on the ‘local drives’.

        So for NAS setups on multiple workstations, this option does not work. Your best bet is probably the normal mapped drives, or Qsync. Not sure why I couldn’t understand this earlier, but now i do and the below video helped!
        https://www.youtube.com/watch?v=cymqasho9xU
        REPLY ON YOUTUBE

      44. For video editing, I utilize the Synology Drive to sync the files between a local drive and the NAS. Drop the active project into the sync folder and let the application do the work. I do my work off of the local drive. Seems to work well.
        When I am done with the project I simply move the project to the archive folder. I this frees up the space on the sync folder.
        REPLY ON YOUTUBE

      45. The only available option I’ve seen that can keep up with a modern editing workflow is the QNAP TS-h1290FX with all U2/U3 flash storage. Most editors are working with 4K-8K footage these days and spinning HDDs just don’t cut it anymore.
        REPLY ON YOUTUBE

      46. If you’re a video editor and want a smooth experience go with a minimum of a 6-bay, preferably an 8-bay, and populate it with at least 5 drives from the outset. And then add 10GbE at both ends (NAS and computer) and an SSD cache if you can.

        When you fill it buy another one. The reason for this is that if you start with 8TB drives and you then add a couple of 16TB to your NAS the storage pool will see those 16TB drive as 8TB drives. There’s not a lot of gain for that until you’ve gone all 16TB drives to them extend the storage pool into the full 16TB of drive space across all drives. Sure you can use something like Synology’s SHR to be able to mix and match drive sizes, but you leave performance on the table by doing that. If you’re doing Plex who cares, but when performance is important you shouldn’t throw it away on a dat to day basis over something you “could” do in the future. Go RAID 5 or 6.

        Once you’ve fully populated the bays and want to go with bigger drives where will your old drives go? Just because you’ve just bought new larger drives doesn’t mean your smaller old drives are of no use and immediately stop working for you. But they still need to be inside something. Even if the process is to buy the new one, transition, then sell the old oneā€¦ the best route is to just buy new once you’re full.
        REPLY ON YOUTUBE

      47. I followed most of these pointers from before, and I still failed. I Needed a large storage solution and also wanted to edit straight off of. So I started watching this channel, and others. Got a Synology 1522+ from B&H, upgraded the ram, put in nvme drives for cache, 10gbe card to hook up to a Mac Studio, 3 14tb Seawolf drives. Configured to hook up, and used a 10gbe switch. Disk speed test looked good with read speed at 1048Mb/s and Write at about 400MB/s. But then real world test, it died to 40Mb/sec from 400 write speeds when transferring a large file/ Final Cut library. Synology said I used all the wrong stuff in it, only their brand of hard drives, nvme, and I had the wrong Synology RAM installed. Took that all out, still would die from 400+ to 40Mb/s. Gave up and sent all back. Don’t know If I had a bad Synology or bad configuration. Synology didn’t help saying I just had non brand stuff when they looked at my logs. Seems like a lot of learning to get set correctly. Wish Synology or someone had a good product solution for us real novice networking people that just wanting a NAS that is easy to set up and edit off of that doesn’t cost a fortune, and an area on the NAS to auto/upload for off site with backblaze or another nas offsite. This channel has really helped me in building my confidence knowledge in trying. Maybe If I ever pull the trigger again, I have to learn a lot more by watching hours more of this channel, before my confidence is built up enough to try again on my own. For now, back to SSD’s and a standard spindle external drives for backups.
        REPLY ON YOUTUBE

      48. love the video. i have a some what related Question, can it support the SABRENT M.2 NVMe SSD 8TB Gen 4?? forget speed i am looking to build a DAS out of Nvme ssd’s so here is the question in detail (if i buy this device and put in it 12 SABRENT M.2 NVMe SSD 8TB Gen 4 for a total of 96TB storage and never connect the eathernet cable to it, just connect it to my pc via usb connection and set up the raid system for it, will it work????? ) i keep looking for a NVME ssd enclousere that takes that many ssds but most are big bulky and take like 4) . so can it work ?????
        REPLY ON YOUTUBE

      49. Agree with you fully, but a major obstacle for speed are the HDā€™s populating the NAS! If you have fixed the 5 points and still running on slow HDDā€™s (80-100mbs) you will not have a smooth experience! This is where either faster HDDā€™s or SSD/NVME kicks in, as the read speed is now the major kicker.
        REPLY ON YOUTUBE

      50. Hey there, learning a lot from you content! Still pretty green.
        Wondering what NAS would you recommend for video editing?

        So far ive been looking at going DIY route, either using TrueNas or Unraid.
        PC Parts Picker -> `/list/t9D328`

        Have also been considering DS1621+ 6-Bay w/ 10Gbe expasion card and two 12TB HDDs (add more as I go)

        Would appreciate you thoughts, Thanks!
        REPLY ON YOUTUBE

      51. I have no interest, for the most part, in video editing but I really enjoyed the video and always learn a lot from you Robbie. Forewarned is forearmed. Thanks very much. ( P.S…. I see a hummingbird on that box over your right shoulder. Good choice; far quieter and tiny poops.)
        REPLY ON YOUTUBE

      52. Been looking forward to a video like this. As a Newbie – There is so little information about the Mininum MB/s speed is required to edit 4k videos with 4 layers of footage. Is it 250Mb/s, 300MB/s, 350MB/s, 400MB/s, 450MB/s – I know more is better. Also – Will a single 2.5GBe ethernet be enough bandwidth for 1 editor?? I have scoured the internet and can not find Base numbers to these questions. Perhaps the author can shed some light on these questions?
        REPLY ON YOUTUBE

      53. Disagree with the “ARM” section of the video. It is not that a RISC (Reduced Instruction Set Computer) architecture is “more compressed”. The line between RISC and CISC architechtures has actually become quite blurry over the last decades. Yes, ARM organizes and processes data differently and was originally designed for very efficient, low-power devices. However, that doesn’t mean that one cannot design a high-performance ARM CPU. Apple’s M1 / M2 line for example is very wide when it comes to execution units and can hang with the best of them when it comes to latency and raw performance. The real problem with cheap NASes using ARM chips is that they simply choose the cheapest available processor instead of the one best suited for the task. And other than X86, where most CPU fall somewhat into the same price / performance spectrum (x86 simply doesn’t cater to the 10$ toy market), with ARM there are so many more designs, especially ultra-cheap ones.
        REPLY ON YOUTUBE

      54. Great Video, However I am stuck, i followed your video up to the point of Mapping Drives, Im using Qnap TS 264 on my LAN, with Windows 11 on PC and when i click network drives on Qnap Finder all it wants to do is is Mount my TS264 rather then search file explorer ?
        REPLY ON YOUTUBE

      55. Thanks for the detailed rundown. Considering the 1522 to replace my aging Drobo 5N. Unfortunately, I’m mostly WiFi in our setup, so the 1GB speed limits are mostly fine. I’ll keep the Drobo, although smaller capacity as a straight backup for any new Synology I get. (Plus, RAID 6, 2-drive failure on the Synology.)
        REPLY ON YOUTUBE

      56. Would this work for 2 or 3 Apple Final Cut users editing footage gathered on iPhones?
        Would the storage via ethernet feel almost equal to that on a MacBook?
        REPLY ON YOUTUBE

      57. Wow, you really learned me a lot of new things. A positive benefit from this lesson was that my backup at Backblaze suddenly recognized my NAS drives when they appeared as local drives. Perhaps you should evaluate if there is a need of a Mac os/final cut pro version of this excellent video?
        REPLY ON YOUTUBE

      58. This might be a silly question but if I wanted to use this as an NVR for 3 POE cameras would this be a good choice? Or should I look to go the Synology route? Thanks in advance!
        REPLY ON YOUTUBE

      59. I have a NAS drive which is downstairs with my router whilst the laptop I intend to edit with is setup upstairs. Whatā€™s the best way for me to transfer video and audio recordings from my phone to an external drive to edit on? I considered transferring them directly to an SSD and then plugging that into my laptop and editing directly off it, but is there any way I can use my NAS to make things easier? (I donā€™t plan on spending Ā£200+ on a 10gbps thunderbolt/Ethernet adapter)
        REPLY ON YOUTUBE

      60. Silly question but does this (and NAS drives in general) require to be hooked up to the internet to work, or can it be used like a standard external hard drive and simply plugged into a USB port to be accessed by the respective computer?
        REPLY ON YOUTUBE

      61. It’s not possible to get 10 000 Megs? What unit are you referring to? Why aren’t you mentionning TB instead of MB or at least GB? are you talking about capacity or speed? IF you’re talking about speed why aren’t you saying capacity per unit of time? Like MB per second?
        REPLY ON YOUTUBE

      62. 12 4TB drives 16RAM MTS900 RAID 0 800MBS sustained 68% processor RAID 5 450-550MBS sustained 81% processor. Spinning drive NAS can easily handle large 1-1.2GBs writes. Reads on the USB ports of NTFS NVMe drive are unbelieveably slow (using the file program on the device). When deleting a volume and recreating one after it’s done the web interface becomes fuzzy and unreadable so you have to log out and back in. So the file transfer performance is a little off. Would I buy one again? Probably. It’s a very good value for what it offers. It’s uber portable. It’s tiny. Very low power consumption. It’s only 50W but it’s the warmest 50W I’ve ever felt. It will probably put Asustor on the map. You’re not going to want to put a spinning drive NAS that can handle what this does in your carry on.
        REPLY ON YOUTUBE

      63. This is one of those products you need but which I hate at the same time ā€“ it’s engineer masturbation and not made for quick and smart setup. It is made unnecessarily complicated. Plz clean up
        REPLY ON YOUTUBE

      64. If I had a 10Gb network setup and a 12 bay synology NAS, but full of hard drives and I add like 256Gb SSD as cache. Could I still video edit effectively Or is it recommended getting All SSD build?
        I’m planning on using the NAS connected via ISCSI to edit but also want a TON of storage like using 12TB NAS hard drives and use a SSD Cache to keep the speeds up.
        Would using SSD’s as cache work?
        REPLY ON YOUTUBE

      65. I have a 4 bay lockster now. Use for file sharing in a home office with four users. Had it in service for 5 years. Has 2 4tb hard drives not even close to full. Wanting to upgrade and use the older model for a backup device. I would like 10gb access. Which is better solution flashstor or locker. Locker is advertised more for gaming and plex. Not sure of the advatages it would serve for file sharing. Hdd per gig still cheaper on standard hdd.
        REPLY ON YOUTUBE

      66. Is it possible to implement RDMA or SMB Direct or RoCeV2 with an all flash NAS? Even other brands? Windows has supported RDMA for almost a decade now, but it seems QNAP, Synology, Asustor, etc do not support any RDMA protocols that will actually enable speeds up to 100 Gb/s with 100 Gb NICs. Im running into a brutal 55 Gb/s bottleneck and it seems to be that the NAS does not support any of these RDMA options. Are there any NAS systems that ACTUALLY, really, truly do support AND are capable of 100 Gb/s?
        REPLY ON YOUTUBE

      67. On first glance, the first use case for one of these that I can think of is for off grid use – cottage, boat, motor-home / trailer (caravan). The NVMe storage is just too expensive vs HDD’s for uses that many of us would have especially if that is media heavy. But, from what i can find online, the power consumption of NVME’s is only about 25% of HDD’s. And that means less consumption of battery power.
        REPLY ON YOUTUBE

      68. Ų“Ų±ŁƒŲ© Ų§Ł„Ł…Ų±Ų§Ł… Ł„Ł„Ų§Ų³ŲŖŲ¶Ų§ŁŲ© ŁˆŲ§Ł„ŲŖŲµŁ…ŁŠŁ… MARAM-HOST says:

        Thank you, boss, for your effort, do you think Flashstor 12 Pro is good enough to install the proxmox backup server with 10Gb linked to switch 10Gb too, I will use it for delay backup in my full rack in my colocation in London?
        REPLY ON YOUTUBE

      69. I just received and setup my 6 drive version. I installed 4x 4TB Crucial RAID5. I’ll get 2 more soon I suspect but am hoping 8TB NVMe’s will get cheaper. I have to say the experience was superb! Very straight forward. I’ve had a Synology DS918 for the last 5 years and both are good, but I find the Asustor a bit easier to use.

        The Asustor Folder app was amazing for making easy to copy content from my backup ext 16TB drive. Simply drag the files from the USB attached ext drive to the folder I want, and done.

        I’ve got 1 of teh 2.5GBit ethernets in use and get ~270-280MB/s transfer from my PC too! Very nice! So much better than the 112MB/s on my Synology.
        REPLY ON YOUTUBE

      70. hello sir. do you have/can you make a video about recovering data files from nas drives? my ts-451 failed but the drives are qood. sadly they are not ntfs so windows cannot read them. thank you.
        REPLY ON YOUTUBE

      71. Hi NASCompare, thank you for all of your video, it does help me a lot in choosing NAS that I want. Can I check with you whether DS223+ support active business backup? Thank you.
        REPLY ON YOUTUBE

      72. DIY version 4bay Nvme+2 2.5ssd : Inwin Chopin or B2 itx , amd itx board with dual nvme , 5600G or 5300G , pcie split enabled and slap on a 8/4/4 pcie riser .

        Now you got 4nvme with 4lanes to each drive plus two 2.5 drive bay
        You still got a free x8 pcie slot
        REPLY ON YOUTUBE

      73. Is using NVMe SSDs a good idea? I have heard that after awhile with constant READ/WRITE SSDs wear out. Heck my computer recommends NOT defragging the SSD. With that said, I have had my Surface Book 2 since 2018 with no issues. I am shopping for a solid inexpensive NAS and this one looks interesting. I do video and photo editing and I need a NAS with decent performance and large capacity.
        REPLY ON YOUTUBE

      74. I think we know what’s missing here… based on Asustor product naming convention, IMAGINE that : Asustor Flashtor 6 Pro FS6706X (yes 6-bay 10G) for $599 šŸ™‚
        REPLY ON YOUTUBE

      75. I have a synology ds1821+ which is loaded with 16tb drives which I use only for video editing + huge amounts of video file storage and pictures and have 10gb switch and It works well but is noisy when the drives spin up. Would using this Asustor NAS filled with 4tb or 8tb drives be better speed wise and without the noise, heat and power use when itā€™s left on 24/7?
        REPLY ON YOUTUBE

      76. First of all thank you for your clear and complete review.

        What I do not understand with this NAS is the intended market:
        With 12 drive slots, the prosumer seems to be addressed.

        However, a prosumer wants hot swappable drives and absolutely no power down to add or replace a drive. Unscrewing the case to get to the drives is also not on the wish list.

        Is it something for the home user? Want those 12 drive bays?

        All in all, I don’t see a market for a product like this. But I could be wrong. The sales figures will tell the truth.

        But thanks again because it is precisely through these kinds of clarifying reviews that customers can make the right choice.
        REPLY ON YOUTUBE

      77. 1. The product page on the Asustor website indicates that the DSD audio is supported via the Hi-Res Player app. But according to the Asustor Compatibility – USB DAC webpage, none of the supported DACs support DSD.
        2. Per the Asustor M.2 SSD Compatibility list, the only 4TB drive supported is the Gen3 WD Red WDS400T1R0C-68BDK0. There are plenty of other worthwhile 4TB Gen4 drives available at the same cost. Those aren’t supported by the FS6712X.
        REPLY ON YOUTUBE

      78. 14:14 The seagulls are trying to tell you that we don’t have enough PCI Express for another Gigabit port, but we have the USB port for our 2.5-Gigabit adapter if you wanna do that.
        REPLY ON YOUTUBE

      79. As far as I’m concerned, even neglecting the (not indifferent) problems related to CPU performance and PCIe lanes, Asustor currently certifies only one 4TB M.2 HDD model, the WD Red SN700, which where I live comes to cost 379ā‚¬ which multiplied by 12 makes the silliness of 4.548ā‚¬… to have almost 41TB of available space in RAID 5.
        If I bought a 6 bay NAS with 6 20TB disks (ex. Exos X20) I would pay around ā‚¬1.824 which in RAID 5 translates into around 93TB of available space.
        41TB for 4.548ā‚¬ (110ā‚¬ / TB) Vs 93TB for 1.824ā‚¬ (19ā‚¬ / TB)
        For my needs (my CD / DVD / BRD / BRD-UHD ripped available on Plex / minimserver at 1:1 quality, my photos and a few family videos shot on a MiniDV years ago), I’d say there’s nowhere near competition. ..
        The fact that the NAS costs little is irrelevant.
        BTW: nice video, as usual ????
        REPLY ON YOUTUBE

      80. Hello! We’re back to watch the featured presentation of Robbie rambling on about this NAS for an hour. We can’t complain if we’re getting what is quite honestly the longest video on the channel. We love his ramblings. But we’re here and busting out the popcorn to watch a video that is way better than any movie I can see at the cinema. And while we do that, we’re just happy to answer your comments, questions, praise, and criticism! Sit back and bootstrap on. It’s a doozy!
        REPLY ON YOUTUBE

      81. Love your channel!! Even older videos like this are watchable months later because thereā€™s so much useful information. Most of what I know of nas, i learned from you šŸ™‚
        REPLY ON YOUTUBE

      82. A 1200$ NAS that has a CPU with a 20% less powerful CPU than the venerable 920+? Thats a hard sell but I guess for a pure file server it would be quite powerful. Still the 1821+ has like twice the power with a similar price…
        REPLY ON YOUTUBE

      83. Looks like you could change the 10gb SFP ports with an M.2 adapter to add 1 or 2, 2.5gbe ports easy enough. The pci slot if working could add a whole new scale of hacking a dremel work :0
        REPLY ON YOUTUBE

      84. Need to get a bigger NAS and currently use an old DS418play. I’m using it for movies, mostly 4k. How does this perform in respect to plex and emby? I hear conflicting stories that you should avoid Terramaster for media.
        REPLY ON YOUTUBE

      85. Thanks for the review, Rob!
        This look like a quite capable machine and I do like, that they include 2 NVMe slots.
        I’m not quite convinced regarding the form factor of the device. I would prefer a rack mount version, but the only viable rack mount NAS from Terramaster (U4-423) only has a single NVMe slot.
        REPLY ON YOUTUBE

      86. I purchased this unit when it first came out and I had network performance issues on TOS OS on the 10gb nic – there was packet loss and other than loading the web UI when only connected thru 10gb sfp+ the device was pretty much useless for file transfers (my goal was to push data from my linux 10gb NAS to this and benchmark it but w/o proper driver support from the TOS it was impossible so I returned it).
        REPLY ON YOUTUBE

      87. Nice!
        I would say they are truly the challengers of the industry, quite affordable and still powerful…
        Thanks for bringing this to our attention!
        REPLY ON YOUTUBE

      88. I have some interesting results with this. Qnap ts-453 bt3 Connected via thunderbolt. Ssd cache enabled on the Lun but not the mapped drive ( windows 11)
        Mapped drive (No ssd cache) write speed 67MB/s Read speed 576 MB/s
        Lun(Read Cache Enabled) Write = 180 MB/s Read 362 MB/s
        Does anybody have any idea why the read speed of the mapped drive is faster?
        REPLY ON YOUTUBE

      89. What is a better to simple video editing NAS now? (max 4K single users video editing NAS ) I’m about to buy a 4way NAS. Cheap: QNAP TS-433-4G (There are NO upgrades) Expensive way: Synology DS923+ Bundle 4GB? VS QNAP TS-464-4G
        REPLY ON YOUTUBE

      90. Hey man, having problems with the auto-dele of the hyperbackup to Google Drive (i have the same hyperbackup to dropbox and it works fine). It can save to Google Drive but can’t delete, so the Google Drive got full. Do you know what can cause this issue?
        REPLY ON YOUTUBE

      91. Do not apologise for being ridiculously thorough! Your content is beyond informative and so glad to have found an expert to assist me in my production company’s network and editing workflow. Thanks and massive kudos to you good sir!
        REPLY ON YOUTUBE

      92. I am giving my first steps installing and configuring a QNAP NAS and have seen many videos from you here on Youtube. I am from Brazil and (unfortunatelly) english is no my native language. I think you would get much more viewers for your channel if you talk a little bit slower, for us (not english native speakers) to understand. Thank you!
        REPLY ON YOUTUBE

      93. I think that one aspect you left out, but it’s very important when trying to edit from the NAS. Speed! What write/read speed can you expect when editing 4K/HD using 10Gbe/TB? Important is to use the settings that Qnap themselves recommend when doing a speed test, plus using the testing tool the use as well, AJA. Over the past 6 months I have had 4-5 people from their support trying to figure out why I don’t get more speed from my TVS-672XT as in their marketing material. Great support, but no results.
        REPLY ON YOUTUBE

      94. Why is 10gbs soo great when 40gbs is with thunderbolt. ( ok not networked but much faster) isnā€™t it? And avaliable on a couple of QNAPs
        REPLY ON YOUTUBE

      95. Damn, the lack of hardware transcoding is a bit of a bummerā€¦ Iā€™d need to replace a failed 1019+ as a media server, and the 1522+ would be an easy choice with hardware transcoding. Without it, Iā€™m not so sure.
        REPLY ON YOUTUBE

      96. OMG “Yes”, I thought,” get a NAS, you have always wanted one!” So I got a NAS, little did I know the learning curve involved. WOW!!! A curve that has been flattened a lot by my new bestest friend Robbie here. Thank you Sir.
        REPLY ON YOUTUBE

      97. 1 – “dynamic IPs traditionally aren’t as fast as static IPs” False. Not even a little true. I’m going to assume that was an intentional error designed to create engagement in the comments. 2 – Please don’t tell people to enable jumbo frames on general networks. Unless you’re doing it on a separate VLAN or an environment in which *all devices* are set for jumbo frames (and the switch), you’ll create all sorts of fun frame mismatch problems (performance and connection errors with non-jumbo devices).
        REPLY ON YOUTUBE

      98. Just about the first part of your video.

        Intelligent life has come and gone on planet earth many times, and we as humans are really about 10,000 years old, as a species, in reality.

        Just think how many times intelligent beings got to our level, and do not exist anywhere on earth today, as earth is literally billions of years old.

        If humans stopped existing, just imagine how long it would take nature to get rid of all traces that we existed?

        Think about it.

        Just imagine for a second, how many times intelligent life could of come and gone before in literally billions of years of earths existence, and how many times nature wiped out the existence they had here. We have only existed as humans now on earth for about 10,000 years, which is nothing, in terms of billions of years, that earth has existed.

        Think about it.
        REPLY ON YOUTUBE

      99. I am currently looking for a replacement for my DS920+ for 4K video storage.
        At first I thought of a DS923+.
        but after watching your comparison video with the DS1522+, DS1522+ is preferred to edit from, with the 10GbE RJ-45 network upgrade module.
        My question:
        Can I remove my HDD (4XToshiba 7.2 Tb formatted in SHR) from the DS920+… and put it in the DS1522+ without risk of losing data?
        Or does everything have to be backed up?
        Work from my Mini Mac M1
        thanks in advance…
        REPLY ON YOUTUBE

      100. Thank you for such an incredibly informative video, especially for someone new to the world of NAS!
        Is there any chance that there will be a similar video guide for Qnap?
        I’ve been vacillating between Synology and Qnap for the better part of 6 months, so seeing what an equivalent setup process would be on a Qnap might finally allow me to make a decision on what system to go with.
        REPLY ON YOUTUBE

      101. I was going to get the 920+ when I heard about the 923 and thought that would be better. For my use case it isn’t. One of my primary reasons for getting a NAS was to use it as a Plex server. Currently my Plex is running on an old laptop with 6TB of external HDD storage. That 6TB is pretty full now so I can’t add more stuff. So among other NAS functions I wanted something with hardware acceleration. I’ve now decided that I’ll run plex off of a NUC with the NAS serving as the storage. I would prefer a 5 bay NAS and wanted to know what your thoughts are regarding getting 923+ vs 1522+. I’ll get the 10Gb expansion if necessary but is there a compelling reason to choose the 4 bay over the 5 bay?
        REPLY ON YOUTUBE

      102. 10GbE is only any good if all devices in the workflow support it. There is little point in a 10GbE NAS running via a 1Gb switch to 10GbE NIC on the editing machine, otherwise you end up with fire hose <-> drinking straw <-> fire hose, to continue the pipe analogy.
        REPLY ON YOUTUBE

      103. Is it possible to connect NAS as DAS via USB?
        Ideally it would be cheaper since both PC and NAS already have a USB port and it has high enough speed.
        If it is not possible by default, is it possible with some PCIe card?
        REPLY ON YOUTUBE

      104. Dynamic IP addresses aren’t “slower” or “faster” than static addresses. Whether your address is allocated via DHCP or statically assigned makes zero difference in your connection’s latency or throughput. You typically want to assign static addresses to your infrastructure components so that your DHCP server going offline doesn’t take down other critical bits of your network, like your NAS. But speed has absolutely nothing to do with it. (Go to town with iperf testing on static vs. dynamic hosts if you want to verify this for yourself, but I’ll save you the time and effort and tell you that you won’t be able to measure any difference.)
        REPLY ON YOUTUBE

      105. Robbie, you will need to slow-down, you gave @04:54 (also) R/W access to that folder to the Guest Account whilst the Guest Account was disabled. No biggie I would guess, with a disabled account but I would not gamble that!
        DHCP (leased) IP’s versus fixed-ip makes no difference in speed, other then the assignment of that IP during a boot/DHCP request but that is milliseconds!
        However, normally the 169.254 address would be due to the Automatic Private IP Addressing (APIPA) where the DHCP server can not be reached.
        It is a non-routable IP, and formally classified as Reserved.
        Unless you set that address deliberately like you seem to have done, I suspect the Synology is in error indicating it to be via DHCP whilst it does not recognise self-assigned perhaps? (or set manually, in your case), and I guess you have a bug to report to Synology šŸ˜‰
        As for the MTU, when you do change it for 10GBe networks, always remember you will need to not only change it on both ends but also in-between, if applicable. E.g. when using switches, routers or load-balancers in-between.
        BTW, if you are concerned about dual-homed NAS, you may want to consider VLAN’s instead, to enforce the 10GBe connection.
        Any chance you are also going to do a video-series on the Setup-Guides for a QuTS Hero system?
        REPLY ON YOUTUBE

      106. Of those not able to directly connect your NAS to your PC – in my case, my NAS is in another room, on another floor – I recommend using video editing software that supports local proxies. I put the originals on my NAS and then use DaVinci Resolve to create local proxies on a scratch disk (SSD) dedicated for this purpose. This approach works very well and works regardless of the network speed to your NAS.
        REPLY ON YOUTUBE

      107. For direct connections between the NAS and another system – like your PC – both sides need to support setting the MTU value – not all NIC support this feature. Also, only recommend doing this if using a direct connection – if connecting your NAS to a 10g network, avoid changing in the MTU.
        REPLY ON YOUTUBE

      108. I always learn something but there are always more questions. So, you can create multiple volumes within a storage pool for different uses. But… why would you want to do that ? What are the benefits ? And the detriments, if any ?

        Static vs Dynamic IP address : What about an IP Reservation on the router instead of the Static IP address on the NAS ? That’s what I tend to do because, exactly as you state, the problem of loosing that NAS IP address number. Also, I have set static IP’s only to have the router assign a different IP address several times.
        REPLY ON YOUTUBE

      109. What? There is absolutly no speed difference between static and dynamic assigned IP. It is only a difference in how the IP is assigned. Once it is obtained there is absolutly no difference in functionality or speed.
        REPLY ON YOUTUBE

      110. !!! Fook in h#ll !!! Iā€™m quite a tech guy … electrical electronics all on my working life … and that hurt my brain … and I wanted to get a NAS for my photos / videos !!!
        REPLY ON YOUTUBE

      111. Hello. I always had a Qnap and now I have a Synology DS220. I stil have q second Qnap to back up to. I am testing now to see how it works. Your Video was very good thanks!. What I do see is that if I delete a movie or document on de DS220 and the BackUp goes it alseo deletes on the Qnaop. I do not want that šŸ™ ans I see no way to have a setting that only moves new files from Ds220 to Qnap. Second question is, is there always a full comlte backup of is there an option to only backup new files ? Regards and hopefully you have a good tip for me. Ben
        REPLY ON YOUTUBE

      112. I agree Synology doesn’t communicate properly to their customers why they are doing these decisions on their hardware/software. We may assume that they have done some study and statistics and they have found out that the majority of the videos their users store are 1080p anyways? Who knows…. With the hardware, I think they want to ensure that you have a consistent reliable experience and I know that not everybody’s RAM is made the same way and with the same quality. 1Gb ethernet bond is fast enough for streaming 4K. DS1522+ I have plays no problem 1080p to my 4K TV. (Let’s be honest I’m not storing 30GB movies in 4K). It plays no problem 4K video taken on iPhone to my 4K TV. Sharing photos but mainly 4K videos with family through Synology Photos across the world in 4K works, playing smooth. (Smooth to iPhones, PC, iMac, Androids struggle and you need transcoding)SMB works, backup of Apple and PC works and yes SSDs are expensive but why would you need them at home? These are not the Qnaps with specs that blow your mind, but I think they take the Apple approach. Overall I think is a solid package that will easily last me for another 10 years.
        REPLY ON YOUTUBE

      113. I have DS1522+ and have no problem playing Plex 4K and 1080p videos to my 4K TV, iPhone, iMac etc. Streaming 4K (taken on iPhone) across half of the world and watching it on PC is not problematic at all (on the standard out-of-the-box solution) as long you don’t have to transcode to some crappy phone that can’t handle the data. That’s when everything comes to a stop because as mentioned the CPU can’t do anything about transcoding. Synology Photos is ok but nowhere close to Google Photos….
        REPLY ON YOUTUBE

      114. Canā€™t be stressed enough how important mapped network drives are. Just set up TS-464 and in the process of transferring data from an old Netgear ReadyNAS 1100. Using browsers and FileStation 5 is limited, with transfers stopping due to file size. Using mapped drives, that is, transferring directly from folder to folder has dramatically reduced my stress levels. Thanks for your videos!
        REPLY ON YOUTUBE

      115. Iā€™m looking to purchase the Synology DS1522+. Based on Synologyā€™s HDD Compatibility List and excluding the Synology drives (due to cost), it appears the highest capacity choices are a Western Digital 14TB WD Red Plus NAS HDD or Seagate IronWolf Pro 12 TB NAS HDD. Which of the two would you recommend?
        REPLY ON YOUTUBE

      116. Thanks for the vid, I have a newer model, and when i went through the same steps it broke off a 3.3TB piece for snapshots, and as far as I can tell i did not select that, i was told that was done. You know any way to reverse that? Just delete the array and start over? Not sure how to do that either, im still doing the initial setup as mentioned in your video.
        Thanks
        REPLY ON YOUTUBE

      117. Great video. thank you so much. I do have two questions.
        at 13:03 why did you skip the explanation between thin, thick and static?
        as per creating a volume, do I have to wait for the sync to complete before I create the static volume?
        REPLY ON YOUTUBE

      118. It gives me the message “Insufficiant Priviliges” after i log into OneDrive
        Any idea how i can resolve this?
        I checked my microsoft account and ivr accepted the permissiol on it.
        REPLY ON YOUTUBE

      119. Be aware that when using this method that several folders and files will be created on the QNAP by the process. I found that I could not delete them until I dug into their properties. It turned out that the were pretty much untouchable except by the admin account even if you have disabled that account. I had to change the properties and then enable my admin account temporarily to delete these folders and contents. I thought that the process created more of a mess than I was prepared to deal with so I would suggest that anyone who is thinking of doing this to do a very small test first. For me, it is easier to use FreeFileSync on my PC to do this backup. I would also consider Syncthing.
        REPLY ON YOUTUBE

      120. I really like my DS1522+ with 5 WD Gold 22TB drives. The weird thing is that it does only show it as 20 TB in the drive listing, however have all the storage.
        REPLY ON YOUTUBE

      121. Hi, just found your vidoes and I think they are very useful. I have a question, in this video you connect the NAS to your router, but can you also connect the NAS directly to a computer via a crossover network cable?
        REPLY ON YOUTUBE

      122. Hi there, I currently have a DS420j NAS with about 15TB of content on my drives so far – If I purchased a 920+ or 1522 to upgrade can I just put the drives from my 420 in there or will erase all my content? Is there a way I can do this in the future that you know of? Thanks for the great content and please keep the videos coming! Mick
        REPLY ON YOUTUBE

      123. I’ve just bought a 412plus, and it’s not coming with any instruction, so thank you for this video. You are an absolute Godsend. I’ll be following your instruction to the letter.
        REPLY ON YOUTUBE

      124. A coworker gave me an old NAS of his so canā€™t really follow along with the tutorial but do I need the login he created to reset the NAS completely and build my own?
        REPLY ON YOUTUBE

      125. As I’m in the market, I’d be very grateful if you’d comment on the thoughts from another commenter who is much better informed at this granularity than I ????: “…CPU that cannot keep-up with its 10 GbE link in basic single-client sequential tests to its own cache. In real-world scenarios it is far too easy to tie-up this low-core CPU with other tasks, or small read/writes leaving it crippled for throughput. Even in your best case of around 800 MB/s throughput to cache, with little or no other concurrent tasks, it is incapable of filling its network pipe.
        To put that in context, look at the DS1517+ (yes, that old) with a CPU that was already considered both old and weak (Atom C2538 from 2013). It too could take a 10 GbE card – the regular non-propriety PCIe kind. Even without NVMe cache it could saturate a 10 GbE link on reads with 5 spinning HDDs of that era and run multi-client connections, mixed traffic, background tasks and VMs. Sometime more cores count, even with the terrible C2538. Fast-forward 9 years since the Atom C2538 and Synology launches its latest 5-bay Plus Series NAS with a dual-core CPU that cannot keep-up with the SATA drives it is hosting, gives you 4 x 1 GbE ports (in 2022!) as standard and asks for a considerable upgrade fee for a proprietary 10 GbE card that the CPU cannot keep-up with.
        This really isn’t a Plus Series unit. It’s a J-Series or, if feeling generous, a non-Plus unit with a proprietary NIC capability. If this model had shipped as the DS1522 (ie no +) with onboard 5 GbE or even 2.5 GbE we could cut Synology some slack – right now it deserves scorn and not hard cash.”
        REPLY ON YOUTUBE

      126. You should ask Synology why they pick the embedded version of APU with its iGPU disabled. And there is the version with higher spec and with the Vega graphic as well. So the real question is why Synology picked the APU with disabled iGPU, knowing many of their customers will want a model with better transcoding support by using a little more pricy model of APU with the Vega graphic.
        REPLY ON YOUTUBE

      127. Hey Mate can you give me a hand here. Iā€™m buying my first NAS for my audiophile music set up. Itā€™s between this 1522+ and the 1821+ and I would like to know which you recommend? Which has faster read write speeds? Which one is faster the Quad vs Dual CPU? Cheers from Italy ????
        REPLY ON YOUTUBE

      128. …..@NASCompares ……BEST REGARDs from BAVARIA! …Is it possible to use slot1 & slot2 with HDDs as raid1 “LongTermDataStorage” …and slot3 & slot4 with SSDs as raid1 “CloudStorage” ???? And is it possible to configure the NAS in a way , that if the HDDs are not in use , so that they sleep , while i work on the SSDs ?????
        REPLY ON YOUTUBE

      129. If they would have gone with a 4 core CPU vs 2 core/4 thread I would have considered this an update. But because they decided cheap on on the CPU I am going to have to wait another year to see what comes out in the 5 bay line of Synology.
        REPLY ON YOUTUBE

      130. I appreciate the balanced reporting. The CPU is the showstopper for me. I would have liked to add a 5-bay unit to my DS422+ but I won’t buy a unit without hardware acceleration for media conversion and the 1Gb/s connections were outdated a couple of years ago already. Not a fan of Synology making everything they can proprietary and castrate USB functionality so that one is forced into their proprietary solutions.
        REPLY ON YOUTUBE

      131. Iā€™m using QNAP, Netgear, HP, Drobo, TrueNAS today. Iā€™m new to Synology though and this seems to be a channel to ask about them. Is there a forum for questions and discussion?Iā€™m looking for a suitable NAS that will provide SHR2 and 100TB+ of possible storage for mostly iSCSI use, no media features required.
        REPLY ON YOUTUBE

      132. I bet their CEO is raging 24/7 because he can’t just put a single transistor in there as a CPU. And as for the proprietary crap (branded HDDs and interfaces), at this point I’m just waiting for a new triangular power plug they can sell for only $500 extra. Let’s not even elaborate on the DSM of hell (7.x) that, after coming out years late, is merely a castration of its predecessor.
        Oh well, I guess that’s just how you gotta run things when you absolutely must run your reputation into the ground and alienate as many customers as possible. ĀÆ_(惄)_/ĀÆ
        REPLY ON YOUTUBE

      133. No quicksync, no dedicated SSD storage, proprietary NIC, proprietary PSU connector – no thanks.

        It could’ve been a great unit, but not like this. Aimed more at business users it seems. Good review though!
        REPLY ON YOUTUBE

      134. I am really going between 1621+ or this 1522+. I really can’t make my mind. I really want something small, and this model being small, I favor it. But then comes the point 1621+ having the internal power supply and that being more efficient then the external one. I am also going between this having low multicore performance. I guess there is very little to no chance for this to run a vm. If I get this I should be only using this as a storage which is also an option, I can get those aliexpress routers with celeron N6005 and do the plex on there while using the synology for its storage bucket. Yes, currently I am very undecisive on this. Any suggestions from anyone?
        REPLY ON YOUTUBE

      135. Much has been said about the issues with 1Gbe for 3 years but really, what percentage of users need more than that right now? How many devices connect via wifi thereby not being able to saturate even a 1Gbe connection.
        REPLY ON YOUTUBE

      136. I bought a 920+ recently since my use case is focusing on storage with few media streaming and a tiny docker image.
        My feeling now is if you want an extra hot spare bay and spicy cpu power or ram or 10gb you better go for 1522+. I choose 920+ because of low power consumption and I now populate 3/4 bay with ironwolf 4tb 5900RPM due to noise since all of them are in my bedroom.
        Choose what you use. I got 920+ for only 350$ šŸ˜€
        REPLY ON YOUTUBE

      137. Awesome video mate.
        I’m only 1 year into using a NAS, I picked up the DS418.
        I use 1 drive for Synology Surveillance Station and 3 drives as media storage for a separate PC that runs Plex Media Server.

        You are such a big help in the NAS space, next step is I would like to add 2.5Gbe to my PC to take advantage of the Link Agreggation to get 2Gb speeds transferring files.

        Cheers mate
        REPLY ON YOUTUBE

      138. Very helpful, definitely a thumbs up! I have a question that you or anyone else might be able to answer. I have been using a two-bay model (TS-259) for quite some years now. I have it configured for RAID 1 with two 2TB drives. Last night, the power connection in the back of the enclosure melted for whatever reason and the unit is dead. Luckily, a friend had an unused TS-253 so I just popped out one of the drives, plugged it into the 253 and within minutes, was back up in a pinch. Was thinking of getting a new TS-231 or TS-233 to replace it. However, I only really use three folders out of a dozen or so on a daily basis. Those three folders combine for maybe 200GB in storage and the rest are long-term storage that I infrequently access. Would there be any benefit to having one 500GB SSD and one 2TB drive, with the SSD having the three folders I always use, and the HDD holding my longer term storage, plus a full backup (maybe daily overrides) of the SSD?
        REPLY ON YOUTUBE

      139. What do you think are the QUIETEST drives to put into this? I would be a brand new NAS user. I will be backing up YouTube videos and storing underlying video, and a whole bunch of photos, work files….
        REPLY ON YOUTUBE

      140. Really wish they would have just given us two 2.5Gbe/1Gbe and two USB 3.2-Gen2 ports. Even at the RRP to $850 with the 10Gbe expansion, that sounds ok…4x 1Gbe just feels like a waste of hardware/space and cabling management is going to be a nightmare to setup 4 port LAG.
        REPLY ON YOUTUBE

      141. I decided not to buy DS414, but wait for better DS416 price. Then I decided not to buy DS416, but wait for better DS418 price. Then I decided not to buy DS418, but wait for better DS920+ price. Now I decided not to buy DS920+, but wait for better DS1522+ price ???????? I hope to finally buy a NAS ????????
        REPLY ON YOUTUBE

      142. I am looking into getting my first NAS system. Your series has made it so much easier to understand on what to look for when jumping into the NAS pool. Thank you.
        REPLY ON YOUTUBE

      143. Synology is now just giving a middle finger to all Plex/Emby users. That would be awesome to see Synology carry this CPU through it’s range of 2022 SMB range. Perhaps they have a plan I’m not aware of, maybe their Play series will have iGPU’s and target enthusiasts?
        REPLY ON YOUTUBE

      144. ??? Are there any NAS units that allow for RAID configuration with an all Solid State storage . To eliminate noise and mechanical HD failures? If so, would you please elaborate?
        REPLY ON YOUTUBE

      145. This is my first NAS set up. I chose this enclosure because I was able to get a decent amount of “bang for my buck”. I am following the tutorial but I have a couple of questions. First, when setting the Nas name and user account name AND PW is it supposed to take a while and hang while doing that or is it supposed to just process straight through that portion quickly? Additionally, since I will be using it with 2 laptops do I have to set up separate user names on each laptop even though I will be the only one using both laptops and accessing the NAS?
        REPLY ON YOUTUBE

      146. Instead of spending the first minute (maybe more) on some old shitty advert that doesn’t relate to how the Synology DS1522+ performs, maybe you should delve into the facts that are crucial for this device, if you have the skills… I’m hoping I can find true facts somewhere else.
        REPLY ON YOUTUBE

      147. Great review! I want to purchase a DS1522+. It is $699.99 at Amazon in the USA diskless. The DS1520+ still sells there at $679.99. I’m not sure that these ever sell at discount — can you reply to let me know? If not, I may as well buy the newer DS1522+ now. I’m a veteran and some resellers provide veterans discount (not Amazon) — are there other resellers anyone here is aware of that may have a veteran’s discount opportunity (for example when I buy at Apple, Home Depot, Lowes, etc). Thank you.
        REPLY ON YOUTUBE

      148. Thanks for the great video.

        It would be nice to see in real time how the 1522 works with playing or editing video files. I normally perform all video rendering from my PC, not the NAS, and use the NAS for file storage. But, how will the 1522 perform if I decide to edit an older video file that Is stored on the 1522?
        REPLY ON YOUTUBE

      149. So, they managed to go even below their anemic V1500B. Wow, just wow. Obviously, scratching features off DSM 7 and pushing cheap Toshiba drives with Synology labels nobody ever asked for at eye-watering prices onto customers wasn’t enough. Amazing how some companies will put forward so much effort into running their brand and trust built over decades straight into the ground.
        REPLY ON YOUTUBE

      150. Synology home/small business NAS stuff has been great but itā€™s getting a bit expensive now – with all those proprietary add ons costing a lot.
        REPLY ON YOUTUBE

      151. Poor. Synology seems stuck in the past and trying to tap into the Apple mindset of slick software and limited market options for upgrades. Aged 1gb ports, aged and few USB, limited HDD and SSD compatibility, proprietary and expensive 10gb port (20% of unit cost!), and expansion boxes priced as if they’re full NAS boxes. I won’t be sticking with Synology for my next box, for sure. Shame, as the software is good, but it isn’t that good
        REPLY ON YOUTUBE

      152. Cores one-to-one will always be better than threads, plain and simple. So this certainly is a downgrade, at best a sidegrade. Whether that higher clock speed will mitigate some portion of that remains to be seen.
        Doesn’t change the fact that this is a completely pointless product though, when looking at the competition and even recent DS generations, as well as the myriad of shortcomings and downsides Synology has imposed on its customers in general at this point. Disappointing but not surprising.
        REPLY ON YOUTUBE

      153. Was looking at this NAS model but ended up building my own unraid NAS with an Intel i5 12500 in a Jonsbo N1 case, 32gb ram with a 2.5gbe lan port for a total of Ā£670. I will still continue to use a few of the sonology apps on my DS718+ like photos etc but unraid seems the way forward for me.
        REPLY ON YOUTUBE

      154. Seagulls must be mating in the background ???????? 9:27, 34:08, 35:22 and even got 2 I hate seagulls at 30:44 and 36:19 ???? Good review, thanks for your time putting this together, looking forward to the Plex test! Also did you color your beard? ????ā€ā™‚ļø
        REPLY ON YOUTUBE

      155. I’m always checking the CPU, and picked models that had the atom processor. I know the history of this, tiny power usage with good performance, which does work well in my testing; although I suspect some of these other processors maybe doing better, I’m just not familiar with them enough to put money on them. Although every machine that I’ve across which is performing really really badly always seems to have a Celeron in it.
        REPLY ON YOUTUBE

      156. Great review, looking forward to the media streaming and the network test video. On one of your previous videos you’ve mentioned that it’s possible to stream 4k without transcoding and the need of an embedded gpu as long as it is done locally on a capable client, I wonder if this NAS can do an easy job streaming 4k to an AppleTv 4k via Plex while on a gigabit ethernet?
        REPLY ON YOUTUBE

      157. Why synology is so poor in regards to the USB ports???…it’s disappointing…not to mention about 1GBE ethernet…Real bad connectivity…worst hardware upgrade ever…
        REPLY ON YOUTUBE

      158. I am about to buy DS1821+. Do you think that its successor DS1823+ will come out later this year? Is it worth waiting a couple of months? I am not in hurry, but if I could get a great deal on DS1821+, I’ll take it anyways šŸ™‚
        REPLY ON YOUTUBE

      159. Synology would be best served to hire you as part of their development review before they release their devices in the wild. Woopee.. this can hit 32GB of ECC DRAM. I am still running my DS-918+ because that also runs on 32GB RAM, I have two 512GB M.2 SSD drives in the cache slots. I have four Seagate 8TB 7200 RPM drives, and the CPU has 4-Cores/4-Threads. Yeah, I’d love to have a newer CPU with more speed, cache memory, and built in GRAPHICS, but Synology isn’t listening. So I am not running out to by a new system from Synology and for once in my NAS journey, I am starting to look into other brands with 2.5Gb LAN ports and quite frankly better CPU specs.
        REPLY ON YOUTUBE

      160. It looks like ds1621+ would be a much more solid option – it’s not that much more expensive, but it’s got better cpu and regular pcie slot as opposed to this proprietary contraption. I’m looking to upgrade my ancient ds1512+ which has served me well for what feels like eternity, but I was seriously hoping for 2.5G as my network is all 2.5G…
        REPLY ON YOUTUBE

      161. Great job as usual. Thank you. I use Wi-Fi only so not concerned about 10Gbe Ethernet. What i am concerned about is the lack of integrated graphics and transcoding. Here in the US the DS 1520+ and DS 1522+ sell both for $700 at some locations. I am not sure if the 22 version is really a significant improvement for those who care about transcoding and do not have extensive surveillance camera system.
        REPLY ON YOUTUBE

      162. I recently got a DS1520+ at a good price even though I knew this model was out. I wanted 5 bays and Plex hardware transcoding. Since it is for home use the potential file throughput performance, 10Gbe, and extra RAM is not that important vs. transcoding. I have UniFi system with NVR so I do not need surveillance support. No issues with HDD compatibility either. I am normally one to always want latest and greatest but not in this case.
        REPLY ON YOUTUBE

      163. I actually prefer my DS1520+ with 20GB RAM (aftermarket RAM upgrade from Crucial) due to its ability to process and transcode video effectively via hardware. I honestly think a more powerful Ryzen CPU should have been used, or maybe a laptop based APU that has hardware acceleration. I’m worried this is a miss from Synology and have zero desire to upgrade.
        REPLY ON YOUTUBE

      164. By the time you put 10GB Synology proprietary network card and Synology proprietary M.2 SSD, the cost of this NAS is already above 1250 EURs and I don’t even include here a proprietary memory upgrade, exactly just like apple, why these companies only copy the bad examples. Ok, good luck with that.
        REPLY ON YOUTUBE

      165. Great video my friend. Still holding out a shred of hope that Synology will still release the 922+ this year :- Are you guys in the know, hearing anything to that end? Either way, keep up the good work fellas – love the channel!
        REPLY ON YOUTUBE

      166. JUST made this video Live, so if you are only seeing 480p/720p, come back in 15mins when YouTube has finished processing the higher resolutions. Thanks for watching!
        REPLY ON YOUTUBE

      167. Hi i just bought my self a QNAP ts-x453d and I guess I did something wrong because I’m getting about 150ea error message a day for whatever reason in 3 of my email. How do I stop it or reduce it to only 1 or 2 email message
        REPLY ON YOUTUBE

      168. Is it possible to only mirror a portion of the two disks and then use the remainder as regular storage? I only need 20% mirrored for important files and want to use the rest for media files that I don’t care to lose.
        REPLY ON YOUTUBE

      169. About the Cross-platform file transfer services – If I am not sure which ones I ticked on the initial nas setup, how do I check now? Thanks
        REPLY ON YOUTUBE

      170. Good video. So I setup a hyper Baack-up to Synology C2 to backup all my photos about 500GB worth of photos. Its been running for 11 days and is only 51% complete but the odd part is has already exceeded the total number of files in my Photos folder and it says that it has backed up 409GB already. How can it by only 51% complete having backed up 400GB out of a total of 500GB and why are the number of files already higher than the total # of files in my Photos folder. Makes NO Sense…….
        REPLY ON YOUTUBE

      171. hi thank you for the useful information regarding backup. i have set my drvies up to be backed on to the google drive have, its been backin up for 12 days now :O( only dpne 5% at 46gb am i doing soemthing wrong?
        REPLY ON YOUTUBE

      172. Hi, sorry for a very basic question. Is my understanding correct that your QNAP is connected via LAN to the same network as your Windows PC? The Qfinder is installed on that PC, so that it will help to detect the QNAP? Is my understanding correct?
        REPLY ON YOUTUBE

      173. Thanks 4 the video. Exactly what I was looking 4.
        But I not C where U defined the target folder on the QNAP.
        In my case the files from Syno will B copied 2 the folder “Downloads”, but I prefer 2 have the backups in the “Backups” folder.
        Any hints ?
        REPLY ON YOUTUBE

      174. Just boughs a 1621+ with 4x10Tb drives. I want the majority to be used for media, but I need 1tb for web hosting, 2TB for my backup from my laptops and 2TB for encrypted cloud storage. Can all this go on one volume or do I need to fence off? I’m feeling a bit overwhelmed.
        REPLY ON YOUTUBE

      175. If i delete anything in the NAS, IT IS deleted in GDrive as Well. Synchronisation. What is the sense? Drive ist Designed to make your local Data Accessible in Others devices. Not to Store a Backup. And … you cant use IT as an external Extension of your disc by using G: because you Need the Same Space local. If you have 20 Gig left in your local Drive, a GDrive with 2tb doesnt make Sense … If you delete Something local, IT IS instantly synchronised with Google. I dont undestand how this can Help Backup your systems?
        REPLY ON YOUTUBE

      176. As much as I appreciate this walk-thru…I despise everything about this product. There is nothing more intentionally difficult to setup than a NAS, and I’ve never wanted to throw a device off a bridge more than my QNAP NAS
        I’ve rebuilt car engines, and have been building computers since I was 8. QNAP is the worst thing I’ve ever experienced and I honestly don’t understand how someone hasn’t made a better version and completely destroyed this company

        Off. A. Bridge.
        REPLY ON YOUTUBE

      177. If we have to replace one of the drives do we have to do the entire initialization of the QNAP again? What happens after replacing a hard drive and also upgrading the RAM to larger?
        REPLY ON YOUTUBE

      178. Hi, great videos and thank you for doing this. We have a TS 669 and when dealing with the storage manager it did not give me the option of Raid 1 after I selected the six drives. Is raid 6 basically the same as a raid 1 and that is the reason?
        REPLY ON YOUTUBE

      179. I would love to have multiple storage pools, so I could have a couple of TB of media that I donā€™t care about losing, and the rest in an SHR for stuff that I do care about. Can it do that?
        REPLY ON YOUTUBE

      180. Hi, quick Q: If my QNAP NAS failed, how can I connect its drives to a Windows system? what tools do I need for Windows to recognise QTS volume? PLEASE advise, THANKS!
        REPLY ON YOUTUBE

      181. Is there a possibility to create a folder that can only be reached via your local network and not via the internet? For example map1 that I can access anywhere via my mobile or pc ad my moms home. but I can only access Map2 when I am on my wifi or cabeld network at home. So that if my account were hacked, people wouldn’t be able to access this data from map2 from outside?
        REPLY ON YOUTUBE

      182. I bought a 6 bay QNAP unit. The more I think about Raid and Pools, I don’t think I need a raid system or even a storage pool. 90% of the data that I want to backup is static, Photos, Video and Audio files. They won’t ever change again once they are written to archive disks. If I have 6 simple 18TB drives I can keep one drive empty and make a mirror copy, 5 in total, of each of my 5 archive drives and save them to to a local location and to an offsite location. If one of the drives goes bad, I can replace the bad drive with one of the backup drives and then back up the backup drive? It seems like raid is best for dynamic data that needs to span drives? I started with Reid 6 but realized it uses 50% of my total drive space. Any way you cut it if you want to back up your NAS you need another NAS or fixed drives.
        REPLY ON YOUTUBE

      183. So it seems you need to create a separate task for each folder on the nas. Is there no option to have multiple/all folders selected and mirrored in 1 task? If not, in case the auto dismount when backup is finished options is active for all separate tasks, will the hard drive only be demounted after the longest running task is finished?
        REPLY ON YOUTUBE

      184. Three weeks ago I set up a DS420+ running DSM 7.0. I have the two Ethernet ports bonded using LACP. If I go to Control Panel/Network/Network Interface and look at the Bond1 interface it tells me that the MTU is 1500, both for the bond and for the individual interfaces. I cannot find anywhere to change this, the edit button just lets me choose different protocols for bonding the ports. I would like to be able to use Jumbo Frames; is this not possible?
        REPLY ON YOUTUBE

      185. Hi, we have TS 228 having 4TB seagte enterpris drive installed. Now we want to add one more Hard disk of 8 or 10 TB.
        Is it ok to add 8TB HD..? And is it possible to keep this additional disk as seperate drive and not to add or merge with existing one.? Please guide with the procedure.. Thanks.
        REPLY ON YOUTUBE

      186. I’m curious, if my NAS has 2 USB ports can they be configured so one automatically backs up TO USB from NAS and the other automatically backs up FROM USB to NAS?
        REPLY ON YOUTUBE

      187. Thanks a million for this clear explanation! Very straightforward but exactly the things you need to understand right after unboxing. Excellent!
        REPLY ON YOUTUBE

      188. Thank you for the video. This was very helpful in setting up my NAS. I followed your steps. Does that mean that when I copy items to the mapped drive they’ll be backed up on the second drive automatically?
        REPLY ON YOUTUBE

      189. Ok so I have 4 new 14tb drives in the mail. Upgrading from my 6tb drives. I have a usb back up with 13tb on it (all the data). Would it be quicker to swap one drive at a time or just pull the bandaid and rebuild the complete pool from the back up? Ds920+
        REPLY ON YOUTUBE

      190. Hi, thank you so much for this video guide, it is extremely thorough! It’s my first time setting up a NAS system and I would not have been able to do it if not for this video (considering the manual from synology wasn’t very helpful). Having said that, when I tried to click on “map drive” in the synology assistant, for some odd reason the buton/option is greyed out and I can’t create the drive on my local pc. I tried running the software as admin and still the same, do you know what may have caused this? Thanks
        REPLY ON YOUTUBE